My IPhone 6 camera is not saving all the blurred images and screenshots (he wasn't like this 2 hours ago) iOS 9.2.1 update was done 2 days ago

Camera not recording pictures

Blurry screenshots

IOS 9.2.1

I was able to solve the same problem by going to:

Parameters-> reset-> reset all settings

He deleted my settings such as sounds, etc, but he fixed the outcome of my picture.  I hope this helps.

Tags: iPhone

Similar Questions

  • My very old DELL does not start all the time. And when that happens, it doesn't look very good.

    Original title: Please help

    I HAVE A VERY OLD DELL LAPTOP THAT WILL NOT START ALL THE TIME, AND WHEN THAT HAPPENS IT LOOKS LIKE SA WORKS VERY HARD!

    I HAVE A VERY OLD DELL LAPTOP THAT WILL NOT START ALL THE TIME, AND WHEN THAT HAPPENS IT LOOKS LIKE SA WORKS VERY HARD!

    It seems that two things must happen... Three if you don't have good backups (it would be the first thing * if * you have not any outside of the machine.)

    (1) the material must be tested.  By restarting and pressing the combination of keys at the right time could test the hard/readers/speed control (CTRL + ALT + D, on a dell computer before starting at startup of Windows.)  For other tests - Dell probably put on a partition or sent a CD with the machine that allows you to perform a battery of tests on the... video, audio equipment, etc.

    (2) a restoration clean install a factory should probably be made * if * hardware testing are in agreement.  You could probably clean the machine by following the steps I'll give you - but knowing no more about the problem that we are so far... If that does not better... it's perception, or something so serious, that a clean install is probably the only real 'next step '.

    (And if the new facility does not solve it and analysis of material found nothing - that's the perception, or something (material) defective which is not be picked up).

    Search for malware:

    Download, install, execute, update and perform analyses complete system with the two following applications:

    Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

    Search online with eSet Online Scanner.

    The less you have to run all the time, most things you want to run will perform:

    Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

    You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

    Do a house cleaning and the dust of this hard drive:

    You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

    Windows XP should take between 4.5 and 20 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

    If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
    http://www3.TELUS.NET/dandemar/spack.htm
    (Especially of interest here - #4)
    (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

    You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

    How to use disk cleanup
    http://support.Microsoft.com/kb/310312

    You can disable hibernation if it is enabled and you do not...

    When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

    -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
    -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
    -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

    You can control the amount of space your system restore can use...

    1. Click Start, right click my computer and then click Properties.
    2. click on the System Restore tab.
    3. highlight one of your readers (or C: If you only) and click on the button "settings".
    4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
    5. click on OK. Then click OK again.

    You can control the amount of space used may or may not temporary Internet files...

    Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

    -Open a copy of Microsoft Internet Explorer.
    -Select TOOLS - Internet Options.
    -On the general tab in the section 'Temporary Internet files', follow these steps:
    -Click on 'Delete the Cookies' (click OK)
    -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
    -Click OK.
    -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
    -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

    You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

    CCleaner (free!)
    http://www.CCleaner.com/
    (just disk cleanup - do not play with the part of the registry for the moment)

    Other ways to free up space...

    SequoiaView
    http://www.win.Tue.nl/SequoiaView/

    JDiskReport
    http://www.jgoodies.com/freeware/JDiskReport/

    Those who can help you discover visually where all space is used. Then, you can determine what to do.

    After that - you want to check any physical errors and fix everything for efficient access"

    CHKDSK
    How to scan your disks for errors* will take time and a reboot.

    Defragment
    How to defragment your hard drives* will take time

    Cleaning the components of update on your Windows XP computer

    It is a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

    Download and run the MSRT tool manually:
    http://www.Microsoft.com/security/malwareremove/default.mspx
    (Ignore the details and download the tool to download and save to your desktop, run it.)

    Reset.

    Download/install the latest program Windows installation (for your operating system):
    (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
    (Download and save it to your desktop, run it.)

    Reset.

    and...

    Download the latest version of Windows Update (x 86) agent here:
    http://go.Microsoft.com/fwlink/?LinkId=91237
    ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

    Close all Internet Explorer Windows and other applications.

    AutoScan--> RUN and type:
    %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
    --> Click OK.

    (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

    Reset.

    Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
    How to reset the Windows Update components?

    Reset.

    Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

    Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

    If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

  • Virus or not? All the icons disappeared and the programs need to be reinstalled.

    I turned on my computer this morning to find my wallpaper completely changed to the hp one. Also, half of my icons disappeared from my office. Programs that remained must be reinstalled for some reason any. Help, please. I just want to know what happened and make sure that I do not have a virus. Thank you.

    Hello

    There is no way sure of 100% to prevent it from happening again, and we don't really know the cause.
    A glitch like this is sometimes due to an update (Windows, the utility of the Antivirus system manufacturer, or)
    another program) and the cure is just another reboot, as it was this time. Although the actual cause is
    still unknown.

    Good for backups of your data, switch off the machine, and follow these steps.

    1 make a Restore Point (how to restore the link is only if you need to do).

    How to create a Vista System Restore Point
    http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
    2. don't run SFC and CheckDisk to ensure that no corruption is involved.

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Desktop screen will not scroll all the selected images

    Using customization / Desktop / background, I have a directory selected with more than 30 photos in there. I select all to move every 30 minutes for my 2 monitor that I use on Windows 7.  But it is inevitable he will stick on a photo and stop every 30 minutes until what I left in a reselect all the photos of cycling. What happened since I installed Windows 7.  Ideas on that. Very annoying to say the least!

    Hello Chris,

    Thanks for the reply.

    Before starting with the next steps in troubleshooting, I would like to know if you have any third-party program/software installed on the computer desktop customization?

    As the steps to rename the TranscodedWallpaper.jpg has not helped, you can try the troubleshooting steps below and check if they help you solve the issue.

    Check the background setting in Power Options

    • Click Start, type Power Options in the Start Search box, and then click Power Options in the list.
    • In the Select a power plan window, click change plan settings next to your selected power plan.
    • Click change advanced power settings, and then expand the desktop background settings option.
    • Expand the slide show, and then make sure that the option of sector is set to available.
    • Click OK, and then close the window changes to the plan .

    Check the context parameter to delete in the accessibility settings

    • Click Start, Control Panel, accessibility, and then click accessibility.
    • Under explore all parameters, click on the make the computer easier to see.
    • Make sure that the option to remove background images not selected not.
    • Click OK twice, and then close the accessibility window.

    Let us know the results of the troubleshooting steps, so that we can help you further.

  • Message "the file is missing or offline", can not find all the missing files and cannot import them again!

    I just opened up Lightroom and saw something for the first time. My latest photos 2 imports (around 1,000) are all displayed in Lightroom with the message "the file named... is offline or missing". I also noticed that in the Finder I see all files corresponding to the dates of importation. I tried to import the files again (I'm lucky to save one of the memory cards), and it won't let me import these specific images, saying they were already imported. Yet, I can't nice them anywhere. On top of this problem (and I'm sure they're related somehow), I just put in the memory card with new images in Lightroom and it went about 1/3 of them say have already been imported. I never seen anything like this. I use Lightroom 4. Please, I beg you, help is urgently needed here because I'm starting to panic! Thank you.

    A second importation is the wrong answer.

    What you need to do, is to use import initial and in the folders Panel, move the files to your hard drive.

  • Load of money 2002 and may not get all the backups of disks to load? I hate this windows 7. I lost all my emails that is too.

    I loaded Money 2002 and tried to restore my back ups of floppy in the drive and my key usb and nothing works. When you try to restore the backup, he sometimes he says disc may be corrupted and sometimes asks for my password, and then it says wrong password. Help, please... My computer was stolen and I bought a new hp touchsmart. Thanks in advance... Ted

    Money 2002 is not supported on Vista, not to mention Windows 7. (Actually a standard support for Money 2002 ceased in 2004...)

    http://money.MVPs.org/FAQ/article/155.aspx

    Have you tried a Forum of money?

    If you find my answer helpful, please click the button "Vote as helpful"! Thank you!
    My Blog

  • Delete photos from my camera do not roll after the update to 9.3.1 IOS iphone 4s, also the photo has not saved when taken by camera

    Delete photos from my camera do not roll after the update to 9.3.1 IOS iPhone 4s, also the photo has not saved when taken by camera

    Mhefzi86 wrote:

    Delete photos from my camera do not roll after the update to 9.3.1 IOS iPhone 4s, also the photo has not saved when taken by camera

    OK, thanks for sharing.

    Maybe you can provide clarification comments on what happens when you try and what troubleshooting steps you did.

  • When I updated my iPhone 6 more iOS 9.3 my camera will not be to the point and seems blurred by far. I already reset my iPhone and my mother worked... Anything other ideas, might be a bug in the iOS update?

    When I updated my iPhone 6 more iOS 9.3 my camera will not be to the point and seems blurred by far. I already reset my iPhone and my mother worked... Anything other ideas, might be a bug in the iOS update?

    I would say "try and do a restore as new iPhone" like everyone else but I'm having a similar problem and nothing works! I've restored all the possible ways and nothing. I got my screen replaced and I still have the same home button but my phone updated with error 53 (makes the phone unusable) but the camera did work before the update. and Apple has released iOS 9.1.2 (13D 20) to correct the error 53 (mainly for other reasons) but when I go to use the camera, it is only black! If someone could help 'discovered' and I would be great!

  • My screen saver does not work all the time, usually this seems to happen once the aircraft stopped in the energy saving mode.

    Original title: my screensaver does not work all the time

    My screen saver does not work all the time.  First time I have turn on computer, it works OK.  Later in the day, this isn't.  Usually, this seems to happen once the aircraft stopped in the energy saving mode.  After the reactivation of the computer (do not), the screen saver does not work when it should. How to run all the time?  I am running Kapersky Internet Security 2011.  This would be closed by the screen saver?
    Thanks, Garybuyit

    Hi garybuyit,

    Thanks for posting your question in the Microsoft answers Forums.

    Just so I'm clear, updated you the graphics cards in Device Manager? You have access to a Windows XP installation disc. If so, follow the steps in this document to make a scan of the SFC. This analysis will attempt to repair or replace any missing or corrupted system files.

  • I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

    I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

    Hi yjain51,

    I understand you had some problems recently with getting Touch ID to work reliably on your iPhone 5s. I know that it is a feature of great security for your iPhone, so I'm happy to help you.

    When you use Touch ID, make sure that your hands are free of any dirt or moisture so that fingerprints can be read clearly. This article explains further:

    Use the ID Touch on iPhone and iPad - Apple Support

    Thank you for using communities Support from Apple. See you soon!

  • Emails sent via Thunderbird are not saved on the e-mail server.

    I have a critical problem with the backup of the emails I sent to Thunderbird.

    The application works very well, that everyone sent mail is correctly saved in the folder "sent" located in the e-mail account of TB.
    The problem is that messages are not saved on the mail server associated with (in this case, pop.mail.yahoo.com), so whenever I have to reinstall the software, I lose all my outgoing emails. If I access my email on yahoo.com account and email from there, it is regularly saved in the sent folder there.

    I would be grateful if someone could
    (i) say me if it is a known problem, and if there is a way to remedy through Thunberdird server or Composition settings.
    (ii) if there is a way around the problem by saving the file 'sent' located in the Thunderbird mail folder on my HARD drive. Is it possible, after the reinstallation of the application, to paste the file sent to the Mail folder? And I want to save the "Sent.msf" file as well?

    Thank you much for the help.
    L

    The problem is that messages are not saved on the mail server associated with (in this case, pop.mail.yahoo.com),.

    With a POP account, this is the expected behavior. Only the Inbox folder is visible on the server, all the other files are the.
    https://support.Mozilla.org/en-us/KB/glossary-terms-including-types-accounts#w_pop

    To access the other folders on the server, for example your sent folder, you need to configure your account as an IMAP account.
    https://support.Mozilla.org/en-us/KB/glossary-terms-including-types-accounts#w_imap

    so whenever I have to reinstall the software, I lose all my outgoing emails.

    You should not need to reinstall the software in the first place. And even if you do you will not lose any position, unless you deliberately remove your Thunderbird profile.
    With pop, all mail is local to your computer, including the "sent" folder.
    http://KB.mozillazine.org/Profile_folder_-_Thunderbird

    If there is a way around the problem by saving the file 'sent' located in the Thunderbird mail folder on my HARD drive.

    In fact, you must back up the entire profile.
    _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Backing_Up_and_Restoring

    Is it possible, after the reinstallation of the application, to paste the file sent to the Mail folder?

    As said before, nothing is lost when reinstalling the application. If you want to move to a new computer by simply moving the profile.
    http://KB.mozillazine.org/Move_to_a_new_PC

    do I have to save the "Sent.msf" file as well?

    If you want to backup files individual mail, you don't need to save the *.msf files. They are just the index files and contain no mail. They are rebuild automatically when you start Thunderbird.
    In any case, to save the entire profile is the recommended method.

  • Computer is very slow and IE does not work all the time.

    I bought a computer from my old employeer.  He is doing all sorts of things, or should I say not to do all sorts of things.  It is very slow and IE does not work all the time.  They have questions arise and ask if the administrator oks things and other things like that.  It came with any disks.  I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it.   Can someone please?

    Hello

    Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
    the former employer to do it for you if necessary.

    Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
    role in this issue. And even the TCP/IP stack might need to be refreshed.

    What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
    machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

    If no joy there's something blocking perhaps.

    Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

    IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

    IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

    Close and restart IE or IE with no addons

    not better?

    IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
    "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

    Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
    are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

    Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
    are bad, but some can cause your question (toolbars are BHO).
    http://securityxploded.com/bhoremover.php

    Startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    Also get Malwarebytes - free - use as scanner only.

    http://www.Malwarebytes.org/

    --------------------------------

    Try these to erase corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    --------------------

    Departure - in the search box, type-> order

    at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

    Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

    ipconfig/flushdns

    nbtstat-r

    nbtstat - RR

    netsh int Reinitialis

    netsh int ip reset

    netsh winsock reset

    RESET

    That resets your TCP/IP stack

    --------------------------------

    Maybe need of these:

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
    video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
    cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
    This will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
    own the software and drivers and all other main drivers that you have.

    Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
    (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
    updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

    Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
    This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
    questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
    manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

  • When I download my pictures from my camera it upload again all the 'old'. How can I download the 'old' and just do the latest news.

    The kodak camera and Windows Photo Gallery. whenever I download my recent photo's do all the 'old' also and my computer is full with a copy of the photos now. Help.

    Hello

    I suggest that read you through the user manual camera and check if there are any settings that need to be corrected.

    As a solution, if you do not want to delete the old photo files, I suggest you transfer to another folder or a USB drive, then delete the old files of the device, then try to import new files on your computer.

    See also: http://windows.microsoft.com/en-US/windows-vista/Windows-Photo-Gallery-frequently-asked-questions

  • I tried to open an old lightroom on an external hardrive to access photos and he replaced my current lightroom with this former... How do you find my lightroom course content? Note the lightroom currently on my computer was not saved in the last

    I tried to open an old lightroom on an external hardrive to access photos and he replaced my current lightroom with this former... How do you find my lightroom course content? Note the lightroom currently on my computer was not saved in the last two weeks.

    Please re - locate all of the missing images.

    Reference: How to find the lack of photos in Photoshop Lightroom

    Kind regards

    ~ Mohit

  • I added a 128 gB microSD card to provide the space for my photos, (a second hard drive) but lightroom won't let me not import all the pictures that are already on the map. The only import option is 'copy', not 'Add '.

    I had a problem with Lightroom on Microsoft Surface 3.  I added a 128 gB microSD card to provide the space for my photos, (a second hard drive) but lightroom won't let me not import all the pictures that are already on the map.  The only import option is 'copy', not 'Add '.  I worked around this by mounting a network directory containing photos and imported from there.  Is it possible to stop Lightroom to see such a map as a camera?

    I have not tested, but it should work with Lightroom:

    http://stltechtalk.com/ultimate-Ms-surface-hack-fully-utilize-micro-SD-card/#.

    Not sure what happens if you remove the card and put in a similar SD card. I would like to test it so that you know what to expect.

Maybe you are looking for