my iphone will not restore and then it says: cannot find iphone
need help
Make sure you have the latest version on itunes installed on your computer download itunes free www.itunes.com/download. Then see here... http:support.Apple.com/kb/HT1808. You may need to try this more then once. If you use windows-Temporarily disable your firewall or your antivirus software, and then try again. If you want more addition to this situation of www. http://support.Apple.com/en-us/HT201413.com
Tags: iPhone
Similar Questions
-
I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).
We do not know what are the following steps, because you have not provided their. Support this article has suggestions for your specific error code.
If you see errors 9, 4005, 4013, 4014, when you restore your device iOS - Apple Support or
-
My Acer V5 Touch will not play videos it just says: cannot load, in which we Plug?
My Acer V5 Touch will not play videos it just says: could not load the plug-in, which is missing?
Videos of the place where?
-
Text bridge will not follow the actual path, says cannot download file
Im trying to use the path of the text of pipe, but it will not follow the actual path. When I tried to open it with bridge he says cannot download file, not taken in charge or extension file type
There is a bug in AE. To work, cut the track that she strives to follow and then paste this path on your layer. I think it was workaround.
-
Windows 7 will not Shutdown and then blue screens
I got this laptop (Satellite A660-18) last week for work and after I installed all the updates of Windows 7 that it would be closed. I formatted the lot assuming that I had done something wrong and it was fine for a day and after installing the updates again, is once more show 'Shutting Down' for about 5 minutes and screening then blue.
Help, please! There are a lot of people have reported a similar problem, but none of their solutions seem to work (ie. re-installing the BIOS).
I am very excited to hear from someone!
Andy
I put t know where you found these reports, but I can confirm that my Satellite A660-13 q runs perfectly with all important updates.
Have you installed updated optional too? -
do not know what Search words to get a response... If you can provide THE answer please do. (to avoid the multiple steps) It should be simple... How to change Firefox page opens.
is my old email account, that doesn't exist longer... you want to change to open again e-address.
Thank you!
This page should endeavour to raise your GMail Inbox
Simple steps to set the home page:
- Tools > Options > General\
- Above: when Firefox starts: start my homepage.
- «"" «Home page, type or paste the URL you want for your home page»»» "
- Press 'Ok' at the bottom of the dialog box
References:
-
Already when I opened my email open in small size. Now when I open my email in Outlook Express, it opens in full screen and will not restore down on a smaller size. How can I reset that?
Then, you need to ask in this forum I posted above. I have not used it myself and can be useful.
-
I downloaded the last Adobe Flash - it is said to be successful but will not work. What he says "Manage plugins but the plugin says it is enabled, but it will not work." I have tried disabling and then enabling - without success. Help, please!
There are two different versions of Flash. ActiveX for IE version and the version of the Plugin for other browsers. Have you installed the correct version? This forum software is not thing that Flash is installed for Firefox or the Plugin is disabled.
1. download the file of configuration Flash from here:
Adobe Flash - Plugin version.
Save it to your desktop.2. close Firefox using file > exit
Then check the Task Manager > processes tab to make sure that firefox.exe is closed.
{XP: Ctrl + Alt + Delete, Vista: Shift + Ctrl + ESC process tab =}3. then run the Flash configuration from your desktop file.
4. run Firefox and test your installation here: https://www.adobe.com/software/flash/about/
- On Vista and Windows 7, you may need to run the installer of plugin as administrator by starting the installation program via the context menu if you do not get a UAC prompt for permission to continue (that is to say that nothing seems to be happening).
See this:
http://vistasupport.MVPs.org/run_as_administrator.htm -
I tried to connect to Xbox Live on my Xbox 360 to internet using Wi - Fi to my labtop. I want to enable sharing on this topic in the Advanced tab, but I get the message that says WMI is damaged and I need to use the system restore. However, the system restore will not restore the system at any time I choose. What is the solution?
OK you have an ETHERNET cable? (cable for PC to the Modem)
What OS do you have?Heres to help, you need to an ethernet cable, or adapter wireless XBOX 360.
With the ethernet cable, connect one end on the XBOX and one end to your laptop.
You go to control panel > network and Internet > network and sharing Center > change the adapter settings. Then you select your wireless network and your local network. Then you right click and press 'CONNECTION of BRIDGE' (requires administrator privileges). After that your DONE! Just check if it works on your XBOX 360! -
When I start my leptop Lenevo my cursor will not move and after clicking on a key sometimes it start to move... and when the window open an item on the top left most corner of the desktop is activated itself and any items on the desktop, I clicked on the selected item open... during this problem touchpad does not work when I press any key some time then he start working side effect... of this problem are
(1) when we assume that slider in the middle of any page because of this problem just started automatically... Suppose that you read the number 10 on any book page and when that happens u don't come on the page no 1 automatically...
what I've done
I did a key recovery... even I am facing problem... Please tell me the steps to fix
Original title: DESKTOP PROBLEM
Hello
Check with Lenovo support, their drivers and documentation online and ask in their forums
on known problems.Support from Lenovo and downloads
http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.doLenovo forums
http://forums.Lenovo.com/Be sure to check that you have the latest driver for touchpad - updated or reinstall at Lenovo.
=============================
More troubleshooting if necessary:
Error: Windows Explorer has stopped working
http://support.Microsoft.com/kb/2694911Crashes Windows or freezes<- try="" these="" first="" and="" the="" methods="" do="" apply="" to="" your="">->
http://support.Microsoft.com/kb/2681286#method22Performance and Maintenance<- check="" these="" especially="" the="">->
http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-7&V2H=win7tab1&V3H=winvistatab1Other methods of troubleshooting to use according to your needs:
Use the startup clean and other methods to try to determine the cause of and/or
eliminate problems.---------------------------------------------------------------
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Include
everything you've ALWAYS had on this machine, including those you have uninstalled (they
remains of leave behind which can cause strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows
Vista or Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1Optimize Windows 7 for better performance
http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performanceOpen the troubleshooter of Performance
http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-TroubleshooterTo see everything that is in charge of startup - wait a few minutes without doing anything-
then right click on taskbar - task manager - take a look at Applications.
Process - Services - this is a quick reference (if you have a little box on)
Lower left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlIs a quick check to see who are loading method 2 - using MSCONFIG
then after a list of these here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns also shows you the complete list
locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor file system, registry, process, thread and DLL
activity in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are
loaded automatically when Windows starts. For each application, what follows
the information is displayed: Type of startup (registry/Startup folder), Command - Line
Channel file, the product name, Version, company name, location in the registry or
file system and more. It allows you to easily disable or remove unwanted programs
that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe
not. The window Watcher says it all, every window created by each execution of the statement
program, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.asp
Many excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded: run DriverView - set
SEE drivers to hide Microsoft - update those with Dump in their names. (Also
updated the BIOS and drivers from the chipset on the site of the constructor/the system motherboard).-Free - DriverView utility displays the list of all device drivers currently loaded
on your system. For each driver in the list, additional useful information is
Poster: load address of the driver, description, version, product name,.
company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit Maker as replacements and system manufacturer of device which are
the most recent. Control Panel - write - graphics card - device manager
the brand and complete model of your video card - double click - tab of the driver-
Note the version information. Now click on UPdate Driver (this can do nothing
MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
If there are 3rd party with their own software and drivers and the other main device drivers
you have.Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
their latest versions. (Look for the system to update the BIOS, Chipset and software updates
Site of the manufacturer here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
REBOOT after each installation.Always check in the Device Manager - drivers tab to be sure the version you are
installation actually appears. This is because that some rollback of drivers before the
later is installed (particularly that audio drivers) so install a driver - reboot.
Make sure that it is installed and repeat if necessary.Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
SCANNER - check manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using
the above methods is preferable to ensure the latest drivers from the manufacturer of system
and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable driver facilities
in the updates of Windows, which leaves on Windows updates, but it will not be installed
pilots who are generally older and cause problems. If updates provides a new
driver then hide it (right click on it) and then go get new ones manually if
you want.How to stop Windows 7 automatically install drivers
http://support.Microsoft.com/kb/2500967===========================================
Refer to these discussions because many more excellent advice however remember to check
your antivirus, the main drivers and BIOS update programs and also to solve problems
with the first method cleanboot.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
My blackberry blackBerry smartphones will not restore my backup
Hello
I have a BB Storm 2 and I save a lot.
I also use google sync to synchronize my address book and calendar.
Last night I synces again and it failed. So I tried a few times more. Disconnection, signed back in and after a while, it worked.
But what I did not notice until this morning that it totally screwed up my address book. Some of the contacts I have had about 75 times. And I lost most of my contacts.
So in my gmail I lost them.
But not a problem. I supported two days ago. But now it will not restore. It does something to my BB, it changes everything, but doesn't I want to restore. So I tried a full restore, a partial restore a different backup, turn off the BB. Everything!
First I tried with the former office and later by the new software. It does not work.
So help me please!
(If my English is strange, I'm from the Netherlands...)
When you say a partial restore do you mean that you tried to restore all the address book? If this is the case, you can try clear the address book database, and then perform a hard reset on your device by removing the battery for a few seconds and replace, then try to restore the address book from the backup file
-
XP will not restore active desktop
Hello rghaynes_710, welcome.
I would try to delete it and recreate it active desktop. If this does not work, perhaps the content on the site itself is having technical problems.Alternatively, you can try to reset Internet Explorer by default, see if that solves the problem.1. click on START2. click on "Control Panel."3. double click on 'Internet Options'4. click on the "Advanced" tab and select "Reset."... "at the bottom of the window5 restart your computerLet us know what happensThank you!Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Fix updates KB2518864 & KB2478658 will not install and have a problem. How to solve this action? This fix tries to install when arrested computer, but when the computer is turned back on, there is a box which reads:
Patching HOTIRON Setup has encountered a problem and needs to close. We are sorry for the inconvenience.
Hi MrGreener,
1. did you of recent changes on the computer?
2 are you able to install all other updates on the computer?
3. do you have security software installed on the computer?
4. you receive an error message while updates?
Method 1
I suggest that you manually download and install updates, check if it installed correctly on the computer.
Security Update for Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 2.0 Service Pack 2 on Windows Server 2003 and Windows XP
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26323
Security Update for Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 2.0 Service Pack 2 on Windows Server 2003 and Windows XP
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26427
See also the articles below to learn more about known issues for both updates and check if it helps.
MS11-044: Description of the update of security for the .NET Framework 3.5 Service Pack 1 and the .NET Framework 2.0 Service Pack 2 on Windows XP Service Pack 3 and Windows Server 2003 Service Pack 2: Jun
http://support.Microsoft.com/kb/2518864
MS11-039: Description of the update of security for the .NET Framework 3.5 Service Pack 1 and the .NET Framework 2.0 Service Pack 2 on Windows XP Service Pack 3 and Windows Server 2003 Service Pack 2: Jun
http://support.Microsoft.com/kb/2478658
Method 2
If the previous step fails then I would suggest that reset you the default Windows Update components and later try to install updates.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Method 3
If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you put the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
-
O2 dongle is never to step of the password and then just says device not detected / found
Original title: im trying to use my o2 dongle to connect to the internet, but for some reason some he used to let me...
Ive connected the dongle and it goes through the normal treatment it says connection. However, it's never at the stage of the password and then just says device not detected / found
Hello
You can try to reinstall the USB controllers and check.
a. Click Start and type devmgmt.msc and then click OK.
b. expand Bus USB controllers.
Note: You will need to scroll down to find this point.
c. the first USB controller under Bus USB controllers right click and then click on uninstall.
d. Repeat steps above for each controller USB is listed under Bus USB controllers.
e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.
f. check the device to see if it works.
You can also consult the following link:
Tips for solving problems of USB devices
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
Hope this information is helpful
-
My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.
My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet. All other laptops in the House are perfectly. Internet disconnects, says local only, then reconnects constantly making internet hard work.
Hi Tinkerbellfancolorado,
- When is this last work fine?
- Do you receive an error message or error codes?
- Recent changes on the computer?
There could be several causes for this problem.
Try starting with these methods.
Method 1
Step 1
- Open Network Diagnostics by right-clicking the network icon in the notification area, and then click diagnose and repair.
- Make sure that all cables are connected (for example, make sure that your modem is connected to a working jack or cable phone connection, either directly or through a router).
- Reset your modem and router. Remove the power cord from the modem or router, wait at least 10 seconds, then plug in the modem and/or router back.
Step 2
Another reason may be windows disable your network adapter to save power. Turn off the power saving option in the properties of the network (wired network only cards) card:
- Open network connections by clicking the Start button, clicking Control Panel, clicking network and Internet, click network and sharing Center, and then clicking manage network connections.
- Right-click on the connection and then click Properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
- On the Networking tab, click Configure.
- On the power management tab, clear the allow the computer to turn off this device to save power option, and then click OK.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems
Method 2
Temporarily disable the firewall, and check the status.
NOTE: To re-enable the firewall after check you the status. If you are connected to the Internet or a network during the time that your /firewall antivirus software is disabled, your computer is vulnerable to attacks.
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
Hope that was heloful.
Bindu S - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think
Maybe you are looking for
-
Automatically redirecting to wrong address
When I load my wordpress site, it automatically changes the URL to end «.co.uk/wp"instead of".uk"but this happens only on my desktop and on my phone or my laptop (running the same version of FF). How can I fix it? Thank you
-
Windows j126tx from HP 15 8. Cannot access BIOS?
I just bought the laptop today and the fn keys is really screwed up, I read that I had to go to the BIOS to change the settings so that I don't have to take for example fn + f5 to refresh the page and press f5 instead. I tried pressing f10 when the l
-
iPod Nano 7; don't know the operating system. When you import a cd, the Tracklisting on iTunes is alphabetical instead of in the order of cd. How can I fix?
-
I get the following error message, but the updates always try to download. All solutions?
-
all messages from a contact are received in plain text with no attachments
I have a contact (my brother) who frequently sends me with images or attachments. His messages are always received as plain text with most of the message disappeared. We tried as much as we know to fix this problem, but to no avail. I get correct mes