Windows 7 will not Shutdown and then blue screens

Similar Questions

• Windows startup is not full, and then after a few seconds that the starting ends.

  windows startup is not full, and then after a few seconds that the starting ends.

  Original title: boot of win7

  Yes, it's the way it happens. All the other stuff are load - computer office, drivers, anti-virus, etc.
  It takes longer is that you have a lot of programs that load with Windows.
  and is faster if you have Windows on a SSD instead of a disk hard standard tray.
  Win7 also much faster than XP load, anything.

• Windows XP will not load past the Blue error screen

  Hi, wondering for a while if someone can help me...

  My xp system will not load past the Blue error screen that is displayed when the computer stopped suddenly or inadequate.

  No matter what are the measures that you choose to take (safe mode, the most recent configurations... etc) the system will just beyond the blue screen on the windows logo download page, where the loading bar moves about 10 seconds before returning to the blue loading page.

  So far I have tried to leave the computer as long as an unused months while I was abroad, remove the battery for varying amounts of time and leaving the computer as long as a day.

  In the absence of a recovery disk, I have no idea how to do to return to the form and would like to receive advice or suggest, keeping in mind I'm not a computer genius (if had'nt you may have guessed). Preferably, without losing my element pictures and videos stored on the hard drive, but it's just preference.

  Thank you, Jay

  Hello

  It does not seem good friend if the Windows operating system does not start even using safe mode, then I don t think you will be able to run the operating system without new OS reinstallation. :(

  To back up data from the HARD drive I recommend that you connect the internal HARD drive to external USB HDD controller and a backup of the HARD drive on another computer.

  Then you could try to reinstall the operating system on your laptop using the Toshiba Recovery CD

  See you soon

• My hp will not go past the blue screen

  I tried everything I can think of.

  Safe mode

  Restore and system recovery

  Cleaning system

  nothing will make me past the blue screen

  Model number G62-244

  Please help me!

  Hello cannary77:

  Sorry your computer broke down. Thanks to updates from Microsoft. Well I see you tried safe mode and couldn't open. I hope you have your recovery disk. It's the time to use them. Just insert the disk and turn on coomputer. If your memory or your hard drive was not damaged it must start the process of full recovery. Follow on screen commands. If you do not have your recovery disk, then you can order them through section of HP computer parts. I hope that this step is all you need. Because if this last resort fails then your computer should be taken for repairs. Maybe just replacing memory chips or the hard drive maybe both.

  Once you fall upwards and re-run. Modify the updater settings to automatically update, but let me pick witch to install. Now manually check you for updater and see if the updates are downloaded. Check only one couple at a time. For some reason when a buch of them settle in once, what is happening. I got lucky when it happpened to me. I could get my computer in safe mode and do a restore from the back. Since I changed my settings it didn't happen.

  Oh if you need send repairs request an estimate may be cheeper to buy new, then tries to fix it. Also check your warranty may still be covered. All HP computers come with one year warranty. Good luck

• Windows XP will not activate and it is not letting me boot in Windows.

  My computer starts... someone can help?

  My computer starts... someone can help?

  I was wondering if someone could help me as soon as possible because I need this computer to work...

  I'm pretty new in this at work, but I was put in charge of fixing one of the computers.
  Here's what happened...

  It was running on windows XP Professional.
  but then Windows XP Home Edition has been installed.

  Someone wanted to Windows 7 on the computer, so I tried to install this... it does not work.

  The computer wil not start, then when it asks to click on f12 or f2, I click on (tried twice) both
  When I go to the start menu, the arrows do not work, so I can not seloect anything.
  I have to let it boot to the 'Welcome' screen (where you connect)
  Also ' still looks like Windows xp

  I can't log on, and then I click the button to do this, it gives me a message that says:
  "you must activate this copy of windows to connect, you want to activate it now?

  It gives me the options of Yes and no.
  When I click No., goes back to the Welcome screen
  but when I click Yes, it looks like it will record in, but the only thing that appears is the image on the desktop and the cursor.
  do not show the start menu, taskbar and icons on the desktop.
  The last time this happened, I waited for a few hours, but it has not changed.

  I have no idea what to do

  Additional details

  I don't know if the hard drive has been formatted before I tried to install windows 7.
   
  I tried to install windows 7 with the cd.
  I also know that Windows XP Home Edition has been installed by a CD as well.
  Windows XP Professional was already on the computer when it is purchased
   
  I just tried the Ctrl + Alt + Delete.
  Nothing is silent... not even the Task Manager
   
  When he told me to click on f12 for "boot menu" I did...
  then he gives me these options:
  -Onboard or USB floppy
  -Onboard SATA hard drive
  -Onboard or USB CD drive

  -System configuration
  -Disk hard Diagnistics
  -Start the utility Partition

  The Windows 7 CD is in the CD drive, but it is not yet installed... I want to install it, so I clicked on "Onboard or USB CD drive".

  Then he said:
  "No available selected startup disk - strike f1 to retry boot, F2 to put in place the utility"

  This is what happens when I press on them:
  F2 - same message (I've tried several times and it has not changed)
  Information system F1 display

  This can be a much more serious problem than I thought at first...

  Here's the report...

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - J8D7P - XQJJ2-GPDD4
  The Windows Product Key hash: xgsndMkYdJsYmUng0qIJ/thx + HI =
  Windows product ID: 00371-868-0000007-85162
  Windows product ID type: 1
  Windows license Type: customer KMS
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {895BE310-089D-4961-993F-103C75314E21} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.120503 - 2030
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a
  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002
  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002
  OGA data-->
  
  Office status: 100 authentic
  Microsoft Office Standard 2007-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005
  Data browser-->
  
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Internet Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed
  Analysis of file data-->
  Other data-->
  Office details: {895BE310-089D-4961-993F-103C75314E21}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-GPDD400371-868-0000007-851621S-1-5-21-3009239493-164954794-3364024073Dell Inc.. Vostro 420 Series Dell Inc.. 1.0.3 20081024000000.000000 + 0001C763807018400F804090409Time(GMT-08:00) Standard Pacific03100100Microsoft Office Standard 2007126wUyn0cAMOwEDuzH1tpBeAWVHFM =89396-708-5064794-6527714 A04547CCA063588  
  Content Spsys.log: 0 x 80070002
  License data-->
  The software licensing service version: 6.1.7601.17514
  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, VOLUME_KMSCLIENT channel
  Activation ID: b92e9980-b9d5-4821-9c94-140f632f6312
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00170-868-000000-03-1033-7601.0000-1992012
  Installation ID: 007215926064612105419286229366928883087035888613494811
  Partial product key: GPDD4
  License status: initial grace period
  Time remaining: 40380 minute (s) on (28 day (s))
  Remaining Windows rearm count: 3
  Trust time: 19/07/2012 09:33:14
  Please use /ato slmgr.vbs to activate and update information on KMS clients in order to update the values.
  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  
  --> HWID data
  Current HWID of Hash: MgAAAAEABAABAAEAAAACAAAAAQABAAEAeqgks6QFqn8IhaRj6mqU4taWGuz4d9y6TFg =
  Activation 1.0 data OEM-->
  N/A
  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC1017 102408 APIC
  FACP 102408 FACP1017
  HPET 102408 OEMHPET
  OEMMCFG MCFG 102408
  102408 OEMB1017 LASRYVITRAGE
  GSCI 102408 GMCHSCI
  SSDT DpgPmm CpuPm

  
   

  Thank you for your help
  There has been much appriciated :)

  But I just fixed the problem

• Windows Vista will not start and cannot recover

  I have a desktop PC HP Compaq Presario, which has about 2 years. The problem started when Windows Vista was not able to start. It would load up on the "COMPAQ" screen and then it would just go to a slider black white screen with a flashing white light on the top left. Now that I've seen a lot of discussions with this similar problem, but it seems that people would rather not reformat in order to lose any important data. But in my situation, I have some important data on my computer so reformatting would be fine, except...

  -Recovery system won't work. I insert the 1 system recovery disk, all files loading correctly, it allows me to choose if I want to reset the computer to factory settings, I click Yes and it finishes the reformatting step. But then the problem comes when I insert disc 2, original content relocation step. It fills up to 10-16% and then I get a blue screen of death STOP: 0 x 00008086. I tried SEVERAL times and the same thing happens.

  -The next thing I tried to do is to fix the computer via a copy burned Windows Startup Repair. Loads everything up, I spent the page where I choose my language, currency, etc. The problem comes when I get to the System Recovery Options. There is no listed BONES and a box appears and says "Searching for Windows installations", and then it stalls just on this pop up. This problem is quite recent, because before there is no pop up and there is simply no OS listed, so I still could not repair or restore in any case.

  -Before, when I was able to go into the advanced options on the Startup Repair disk (when he was not of "searching for Windows installations" pop up to stall on), I'd go to the command prompt in attempt to chkdsk/r C:. All bad sectors or groups or something else would be fixed, and then he would hold to step 5 of 5 when checking free space.

  -In addition, I tried to make a diagnosis of memory via the Startup Repair tool. That's what I get:

  File: \boot\memtest.exe

  Status: 0xc000000f

  Info: The selected entry could not be loaded because the application is missing or corrupt

  
  

  Furthermore, I cleaned my computer, it is now almost completely free of dust. In addition, I can't get into the BIOS, I can't get into safe mode, and now I can't have in the command line

  Hello

  If you are unable to enter the BIOS and all the other problems, you have hardware problems
  and need the help of a real store of the computer (no leeks and glances at a Best Buy or any other
  Department stores) or Support of HP/Compaq.

  Compaq Presario Support
  http://www.Compaq.com/country/cpq_support.html

  Forums for HP/Compaq
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 8 will not shutdown or reboot, nothing works!

  I cannot shut down my PC or even restart, he says: 'your PC came across a problem and must restart. We are only collecting the error information, and then we'll restart for you. »

  I tried everything I could do!
  Here's the event viewer!
  First was
  "The system has rebooted without judgment properly first. "This error can be caused if the system unresponsive, crashed or unexpected power loss. Kernel-Power
  Second was
  "Try to restore the system to original condition failed. Changes to the system have been cancelled. " ResetEng
  Second is not on the photo ' couse was taken before that I tried to fix it!)
  
  I changed my partial memory dump! It still does not.
  
  Then I open Power Options and uncontrolled of first and second! Does not! Once again the error!
   
  I changed the automation mode sleep after 30 minutes and turn screen after 15 min Never or my PC will break if I let him sleep!
  Help!

  Hello Nikola,

  We would like to know the following details from you to help you to come.

  You have a mini dump file to the c:\Windows\Minidump location?

  If Yes please check the private message send you with this response.

  However, you can go ahead and follow the steps in the link given below.

  Of core Windows event error ID 41 'the system has rebooted without cleanly close the first' in Windows 8, Windows Server 2012, Windows 7 or Windows Server 2008 R2

  http://support.Microsoft.com/kb/2028504/en-us

  Write to us if you are still having the problem. We will help you to come.

• I have a Dell Dimension 4500 Windows XP Pro SP 2. I have a new installation disk. Windows Update will not work and Microsoft Update will not work either. What Miss me?

  Pentium 4 CPU

  1 GB of RAM.

  Win XP Pro - SP 2

  Dell Dimension 4500

  If it will not download from this link on your PC, try another and just use a USB key to copy on you and then run it. Once installed SP 3, and then the fun begins because there are about 100 + updates after her.

• my iphone will not restore and then it says: cannot find iphone

  need help

  Make sure you have the latest version on itunes installed on your computer download itunes free www.itunes.com/download. Then see here... http:support.Apple.com/kb/HT1808. You may need to try this more then once. If you use windows-Temporarily disable your firewall or your antivirus software, and then try again. If you want more addition to this situation of www. http://support.Apple.com/en-us/HT201413.com

• Display driver nvlddmkm stopped responding and has recovered successfully after sleep, and then blue screen

  original title: display driver nvlddmkm stopped responding and has recovered successfully after sleep, then BSOD.

  Well, if not some time ago, we got a Nvidia GeForce 240GT video card. We used an ATI Radion 3460 I think and it worked normally. Then when we got the nVidia card, we started to see the problems. Occasionally, he would show the blue screen of death. I tried to reproduce the error and came to an interesting conclusion. Whenever I put the computer in sleep mode turn off mode 'sleep', I wait a bit and then the login screen appears. I connect and it shows me the "display driver nvlddmkm stopped responding and was recovered successfully. Then after that, if I go on YouTube and try to watch a video, the computer hangs and a BSOD would leap upward. I am angry. I used "standby mode" so and with the new map video, everything got worse. I tested this problem on Windows Vista and 7. And btw, the drivers are up-to-date, I made sure the driver nvlddmkm himself file is up-to-date, and temperatures are perfect.

  update the drivers from NVIDIA. Also make sure that your power supply is powerful enough to handle the new nVIDIA card. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Satellite L630-10R - do not start and a blue screen

  Hello world

  I recently bought this laptop which had everything to convince me, unfortunately, I was a problem since last night and I want to try all reasonable before returning to ensure.

  I was using the computer quite by chance (online games, web browsing, especially VoIP) when he decided to stop and restart. Now, whenever I try to start windows, even in safe mode, I get a blue screen as soon as I entered my password. The same problem occurs when you try to run in safe mode.

  I thought it might just be a very aggressive and effective virus and thought it was well deserved, knowing that I had not yet installed an antivirus. So I burned a Ubuntu liveCD on another computer and tried to recover my data from here, but nothing helps: Ubuntu does not start or, on the contrary it gives me just sort of memdump or stacktrace (at least I guess that's because it has hexadecimal addresses and what looks like function names)

  I'm kinda stuck and I really don't understand what could have caused this. Any idea would be appreciated. A code error that appeared when you attempt to start windows, but don't _always_ appear not, is something in the sense of * DRIVER_IRQL_NOT_LESS_OR_EQUAL *.

  Thanks in advance,

  Shin

  Hey Buddy,

  Theoretically, it could be a driver only issue

  If you want to try everything before bring warranty, you should try a Toshiba Recovery disk system recovery facility.

  It work?

• The Windows Installer will not stop flashing on my screen as it tries of are flashing just fast I can't even stop it in the manager__ task

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with widows Explorer programs
  • Setup error messages-windows quick flashing guard on my screen, as if it starts
  • Recent changes to your computer
  • What you have already tried to solve the problem tried to get rid of all the old files of RIM software
  Hello
  1. have you made changes on the computer recently?
  2. do you get pop windows installer when you start the computer?
   
   
  Method 1.
  Re-enter the Setup engine
  a. Click Start, click Accessories and then click command prompt.
  b. at the command prompt, type the following and press ENTER after each line:
   
  MSIExec /Unregister
   
  MSIExec/regserver
  
  Method 2.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 8 will not start to sign in screen

  Hi all

  I'm sorry if this problem has been posted, but I read a lot of discussions that do not apply to my question. I can't get into safe mode. I can't access the operating system. I can't do anything. It shows the Packard Bell logo and spinning loading animation and then nothing. Black screen.

  Can someone tell me please how to fix this? As said I can't in safemode, bios or anything. I tried to boot from the drive with an ISO image of a registry Fixer to this topic. Nothing.

  Please please help.

  The most modern machines do not use the old Chargers to start which allowed you to enter safe mode F8 during the startup mode.  If you can't reach the Windows login screen, you can get into safe mode by restarting while clicking the option to reboot, but it does not help if you can't get there.

  Given that, most of the manufacturers have prepared with their own solutions. My computer Vaio from Sony has a button of special pinhole that I had to press with a paper clip to enter into recovery mode.  Other manufacturers have other options, some require a USB thumbdrive to enter recovery, or a CD.

  At this point, you probably want to contact Asus to know which recovery method they use.  I hate to bring bad news, but they'll probably say "why did not a recovery USB disk? (as if someone creates their own set of disks of repair when they receive a new computer).

  Help a friend with a Dell laptop (did not have a problem, but wanted a clean install anyway), Dell sent us a free night FedEx ship from a restore CD. ASUS could be so kind. I know that Sony was not. If the recovery of my Vaio button didn't work, they wanted $60 for a CD!

  Anyway, the manufacturer is your best bet, that now, if you don't have a USB self made for recovery.

• Mozilla Thunderbird will not start after the blue screen.

  There was a program that was supposed to update the drivers but caused a blue screen. I had to go back to a previous point of reset to get Windows 7 running again. Now Thunderbird gives me an error "could not load XPCOM" at startup. What should I do?

  I solved the problem as follows:
  1. turn off the antivirus software.
  2 delete the program folder in Thunderbird, C:\Program Files\Mozilla Thunderbird (Windows 32-bit) or C:\Program Files (x 86) \Mozilla Thunderbird (64-bit Windows) by default.
  3. use the browser to download the Thunderbird installer on the Mozilla site.
  4 reinstalled Thunderbird by running the installation program.
  5 turn on antivirus software.

• Windows XP will not shutdown

  My boss has problems on start-up & shut down windows xp.  Tried restoring the system, but since the shutdown/restart had to be done by a hard judgment that interrupted the restoration process.  It was originally a message from missing ddl file (didn't write it :() and now I do not get this message a solution.)

  Please keep in mind, I'm not a tech guru but can generally follow the specific instructions.  Any help would be greatly appreciated.

  mj1883,
  If you start in Safe Mode , the problem persists.  If so then I suggest to start with the implementation of a clean boot.  You can also run Chkdsk /r and sfc/scannow. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.