Envy 17 J100: envy 17 job does not recognize my ssd

Similar Questions

• MacBook does not recognize the SSD.

  Hello

  I would like to replace my HDD on my MacBookPro (13 "/ Mid 2010/ElCapitan") with an SSD. I bought a SanDisk card Ultra II 480 GB SSD and SATA to USB cable (this:http://www.ebay.co.uk/itm/251800670431?_trksid=p2057872.m2749.l2649&ssPageName=S % 3AMEBIDX % 3AIT TRK).

  I wanted to connect the SSD drive, format, make a copy of my HDD with SuperDuper! and change the part. But seems that my MBP does not recognize the SSD! I can't see it in disk utility, or in the office.

  What I am doing wrong?

  Thanks in advance.

  How have you plugged the SSD drive?  It is installed internally or externally via USB?

  Ciao.

• G7-1368dx Pavilion: Pavilion G7-1368dx does not recognize my ssd.

  I have problems to an ssd added to my computer.

  I tried two more different: 530) 1 Intel series-256 GB and 2) Crucial Mx100 - 512 GB.

  The Crucial drive is the one recommended by the tool of their compatibility.

  I tried calling HP support but everything what they told me was that my computer does not support an ssd and I think they're wrong, as I read messages like this http://h30434.www3.hp.com/t5/Notebook-Hardware/Does-HP-G7-1368DX-support-SATA-III/td-p/2798639http: /...  where Sergiy already has one installed and works.

  I tried several different softwares, tried tried cloning backup all seem to succeed but the when the drive is installed and I try to start I do not found disk errors.

  I also tried to use HP restore disks that I created with the HP recovery tool, they are unable to find the drive either. Even an iso of Win7 directly downloaded Microsoft can't find it.

  Thanks in advance.

  This is to help nothing else out there if they have a similar problem with ssd is not seen on the hdd0 port, but that a regular hdd works fine.

  Get a motherboard replacement for SATA cable. For some reason, one that came with my computer would see a normal hard drive, but not just any what SDS (I tried 4 different brands, so it wasn't a thing of brand).

  

• HP Envy 15-as043cl does not recognize second hard drive.

  I added an OCZ (Toshiba) TR150 960 GB disk SATA space. Obtained the correct material from Bios HP (connector and cradle) does not seem to recognize it. Is not recognized by the Disk Manager.  Update bios to F.22. tried everything I could think of without success. Hard reset, looked in the bios to see if there was a setting of the drive (no) tried to turn off the power of security starting as suggested in another thread on the same topic. Laptop has a nvme 256 GB disc which works fine I just want more space. Never had this problem with my desktop PC!

  It's real embarrassing... I discovered that I had hit the cable that goes into the ZIF connector. Maybe someone else can learn from my mistake.  Thanks for your help!

• y510p does not recognize the SSD to the first boot.

  I have a new y510p that I received this week. First thing I did was to replace the HD 1 TB with my own OCZ Vertex 4 256 GB SSD Drive.

  When I turn on the laptop for the first time, it does not find a bootable device (through network devices, then says no bootable device). If I use ctrl + alt + delete to restart the laptop, it detects the drive on its own and begins booting in Windows.

  I would like to understand why this does not work the first time? I went into the BIOS and I saw that it says that there is no hard drive detected.

  This worries me a bit, like maybe one day, he decided to no longer recognize the drive after the ctrl-alt-del?

  Everybody that experience and have a work around?

  Thank you!

  Hey Z,.

  I appreciate your response! That's actually what I thought as well. What is strange, this is even after the firmware update, it seems, the question was always present, but I just had my laptop for a while and it booted up and it starts right in Windows.

  I was thinking about it. On the first boot after the update of the firmware probably had some time to "finalize" the update of the firmware, firmware update require a power cycle.

  Maybe the firmware update solve the problem after all, and it only took an another start after the initial report so that it can work properly

  I guess my advice to anyone having the same problem with a disc OCZ Vertex 4 is to spend at least 1.5 firmware (which is what I am now, and it's working properly). Beware that OCZ 1.3-> 1.4 and 1.4-> 1.5 will destroy the data on the disk, so if that's your primary drive, back up everything.

  I'm glad it works now!

• My laptop Dell XPS 17 (L702x) does not recognize an SSD pro Samsung 840

  Hello

  I buy all my first SSD for my laptop Dell XPS 17 (L702x) (8T7CQS1). I managed to install the Samsung 840 pro (MZ-7PD256BW) at the HARD School of XPS drive, but the BIOS does not detect as a second HARD drive.

  My BIOS version is the most recent: A19 (26/10/2012), I tried to load the BIOS default settings, but no change.

  The SATA in the BIOS mode is AHCI.

  What could I do with them?

  Thanks, if you can help me,

  Kris

  Hi Kris,

  Traction test drive 1 and put the SSD in this slot. Then boot in the BIOS to see if the drive is detected.

• HP Envy 700-215xt does not recognize 2nd hard drive

  I added 2 hard drive, Toshiba 2 GB (DT01ACA200), and it will not be displayed on the player list if I click on the computers tab under the start icon.

  It is displayed under the disks in Device Manager and it says "this device is working properly." under the general tab.

  Under the Volumes tab on the status line it is said "not initialized".

  Any ideas?

  Thank you

  Hello:

  You may use the tool of Windows disk management to partition and format the drive.

  This looks like a tutorial for a XP operating system, the General procedure is the same.

  http://dashboardhelp.datarobotics.com/170/en/win/formatting_drives_using_windows_disk_management_utility_help.htm

• Desk top HP does not recognize the external hard drive

  My HP Envy Phoenix 810 does not recognize my external hard drive Seagate 3 TB, which is installed in the drive enclosure hard Bytec HD-35SU3-BX. Have you tried two different 3 TB HD and two boxes of Bytec and nothing works.  When I installed my 1 TB in the same pregnant, it works.  Why my computer won't allow me to use my 3 TB HDDs?  I use Windows 7 and Internet Explorer 11.

  I suggest you directly contact Bytecc and inquire 3 TB HD the HD manufacturer is supported. I had an old AZIO dock who does not identify / initial with WD drives.  It was a firmware issue.

• Satellite M50-A-110 does not recognize the new SSD?

  Hello

  I bought the M50-A-110 model and tried to replace the HARD drive by a Pro 840 Samsung SSD. The laptop does not recognize the SSD drive, so I sent him to the local Toshiba service for inspection.

  They discovered that the laptop does not recognize ALL of the latest SSD (they tried to Samsun, Intel, Crucial, Kingston and SSD Seagate). They checked, and I possible newer BIOS, so this isn't a problem, and the SSD worked fine on other computers.

  Someone knows how to solve this mess?
  Toshiba has a BIOS beta I could try?
  Any other ideas would be welcome.

  As a user of long date Toshiba, I must say that I am a little disappointed. I mean I work in it, and this is the first time that something like this happened to me with a new product.

  Hello

  I can't believe that Satellite M50 - A can not handle any of the mentioned SSDS.

  I upgraded my Toshiba laptop with SSD Pro 840. But before I did, the update of the firmware of SSD was necessary. Before the firmware update, the SSD has failed, after the firmware update, BIOS can handle the SSD.

  I would recommend to check the SSD for the firmware update!

• Aspire One d255 does not recognize the usb connected external ssd drive

  I want to replace the original HDD 160 GB with a 120 GB Samsung ssd 750 evo but bios and win 10 does not recognize the ssd drive as an external drive connected via a usb connection, so I couldn't create an image of my internal hard drive.  Is there a way to clone my hard drive SSD, so I can exchange the disc later?  I need to update the bios, install a missing driver, etc. ?

  I used two different connections: one is a 2.5 "SATA case disc that I used with a disk 2.5" HARD and works very well with the HARD drive and the other is SATA/IDE connector combination with cables for SATA and power and none of these works.  I read in another forum during my research that the Aspire One d255 doesn't recognize any external SSD connected through a USB either.  Since my netbook has no data, and I had just a pure 10 Windows installed on his drive HARD internal, I removed the 160 GB HARD drive and replaced by a 120 GB SSD and installed another Windows own 10.  It worked and my system boots now in less than 20 seconds.   We can close this thread now since I now have a faster machine fully function.  Thank you!

• Install Windows 8 does not recognize the system drive

  I built a new machine (chart below). Since this is a new machine and not an upgrade, I bought Win 8 Pro 64 bit OEM to do a clean install. The SSD is my system disk that Windows 8 will be installed. Four data drives are mirrored, two for the other two. Construction went perfectly. The BIOS recognizes all six disks: 1 SSD, 4 HDD, 1 DVD.

  Insert and boot the disk of Windows 8. Accept the EULA, enter the product key. Arriving at the page "Where do you want to install Windows?", only four hard disks are listed. The SSD (installation to go) is not found by Win 8. ??? I tried to change ports SATA, cables, power supply - no difference. For each new change of hardware, the BIOS still sees everything. This isn't a hardware problem.

  The question remains: why the installation of Windows 8 does not recognize the SSD drive. All five disks are on AHCI. I'm not in RAID.

  I spoke with crucial technical support of all (manufacturer of the SSD). They were also surprised that the drive does not appear in the list.

  Does anyone have a solution? I spent all the money on hardware, as well as the new version of Windows and I cannot install it.

  This is the real kick in the teeth: Microsoft won't support me. The OEM of Windows 8 version is the same as manufacturers, such as Dell or HP. Support told me I had the support of the manufacturer. HA! I am the manufacturer. Either that or upgrade from an earlier version of Windows. This means that any that a new construction machine will get ZERO assumption of Microsoft. All just great.

  Thank you in advance for any assistance.

  Windows 8 Pro 64-bit (full version) - OEM
  Intel Core i5 - 3570K
  Card mother GIGABYTE GA-Z77X-UD5H
  Crucial Ballistix 2 x 8 GB DDR3 1600
  Crucial M4 2.5 "128 GB SSD (system disk)
  WD Green WD30EZRX x 4 (data readers) 3 TB drive
  Rosewill Challenger-U3 ATX Mid Tower Case
  SeaSonic M12II 620W 620 Bronze PSU
  ASUS DVD writer

  The DSS must be LOW LEVEL FORMATE.

  Once, there may be no other [HDDs] not connected to the SATA ports.

  Install Windows 8 Pro now.

  [Edit] Can someone please mark this as answered? I can't because I posted the question. Thank you.

• ITunes does not recognize my device. I have windows 10 on a HP Envy.

  I recently bought a HP Envy and it came with the operating system Windows 10. Whenever I plug my phone the phone companion rises and ITunes does not recognize my device.

  All the patches?

  Install the latest version of iTunes on your computer.

• HP 5600 Envy: I had to get a new laptop - it has Windows 7 and does not recognize my HP Envy 5600. Help!

  I just use the indications given on the support forum.  Error message was: "Printer not installed."  Not much to do!  My old laptop fell and broke, I got another one with Windows 7 too.  But it does not recognize my HP Envy 5600.  I have a wireless connection and a WiFi network in my house.  1 thing: it installs it as a scanner, but not a printer.  Please help me - it ' for 3 weeks and I can not print!

  Thanks in advance to anyone who can help you with this!

  Thank you.  In fact, I did a download of the printer driver for the HP Envy 5660 and let him take his time.  It installed perfectly and now I am running, printing, scanning and copying everything on Pinterest to get my house and my world a more beautiful place!  Thank you very much for your help!

• HP Envy printer 5540: printer does not recognize paper 8.5 x 11

  I removed the paper 8.5 x 11 and printed several photos 5 x 7. I removed the paper photograph 5 x 7 and reinstalled paper 8.5 x 11 in the main tray. Printer will not recognize paper 8.5 x 11. I removed the paper and slid back the paper guides and reinstalled the paper. No change in the problem. When I select "Copy" on the screen of the printer and go to settings, it displays "tray and main paper tray: 5 x 7" if I try to print from the computer and select 8.5 x 11 paper, the printer does not recognize that size paper and continues to display paper 5 x 7.»

  Hello

  Open and close the paper tray, here, it will show on the screen of the size of the paper.

  Click on modify and change paper size we Leter and the type of paper, such as plain paper, then check all difference.

• Bridge does not recognize my camera more after the installation of El Capitan.  PLEASE FIX THIS!  I can't do my job!

  Bridge does not recognize my camera more after the installation of El Capitan.  PLEASE FIX THIS!  I can't do my job!

  If your Adobe program worked before installed El Capitan and does not work after you have installed El Capitan... How is problem from Adobe?

  FAQ on the Mac 10-11 https://forums.adobe.com/thread/1979303

  He has problems with Mac 10.11 El Capitan... which is perhaps one of them

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html

  -See answer #5 in https://forums.adobe.com/thread/1965850 for several solution links