WAP54g does not recognize the IP address of my laptop with active Mac filtering

Similar Questions

• Email provider does not recognize the email address after entering different credentials

  Entered my username and password on e-mail account of her husband.

  I entered my username and password on e-mail account of her husband and now our email provider (Bell South) does not recognize his e-mail address to receive messages.  It's as if I have more mounted his account with mine.

  Try to remove his e-mail account, and then close WinMail and then compact and repair the database (see www.oehelp.com/WMUTil/).  Then add the account back with the right credentials and then see if that solves the problem.

  Steve

• Need help... New office which does not recognize the IP address

  I need help, my father, I bought a HP for Christmas to replace its old.  Problem is that I can't the computer to recognize the INVESTIGATION period, it says all drivers are working correctly, but still cannot connect either wired or wireless.  I have only addressed dells, it's my first experience with HP on Vista.  I need help fast because I'm about to go home and I would like to have him upward and running, any help or suggestions would be greatly appreciated

  I appreciate the suggestion and assistance.  After talking with tech support, they said it was actually the computer, I returned it and got a replacement and everything works fine.  Once again thank you to all who helped.

• Windows 7 does not recognize the external hard drive (works great with XP)

  Hello

  Windows 7 nis do not recognize my drive external hard seagate. I get the unknown device message in relevant usb port. I have not encountered this problem initially, and the drive is recognized on a PC using XP.

  Model number: ST315005EXD101

  Help, please.

  Thanks Mark. After having tried many suggestions, I found that disconnect the PC from the sector and to leave instead of toggle solved the problem. Simple but do not remember the last time I did! :)

• I just buy Photoshop and I'm going to download and Safari says it does not recognize the address

  I just buy Photoshop and I'm going to download and Safari says it does not recognize the address

  Hello

  If you purchased Photoshop CC, please go to https://creative.adobe.com/apps and log in here with your e-mail ID. If this is your first time plaese reset the password

  Search for Photoshop and start the download of Adobe Creative cloud.

  PS: Adobe creative cloud will be installed automatically

  Ankit

• Foxfire does not recognize my email address which is in thunderbird. Does take and how I going to foxfire if not?

  I downloaded Foxfire thinking that Thunderbird and Foxfire is the same. Am I wrong? Foxfire does not recognize my email address or password. How can I fix it?

  Firefox and Thunderbird are two software published by Mozilla, but they are completely different.

  Firefox is a web browser, visit Web sites.
  Thunderbird is an email client, send and receive emails.

  What do you mean with Firefox won't recognize my email address or password? Why do enter you your email address in Firefox?

• DreamColor LP2480zx does not recognize the USB for calibration

  Hello

  I have a DreamColor LP2480zx, which does not recognize the USB connection to the computer during calibration.  I have my eye HP connected through this monitor, so I know the connection and the cable is good and mouse, keyboard.  My setup is like this:

  Reference Dell 690 running 64 bit + Windows XP

  DreamColor LP2480zx

  Apple Cinema Display 23 "

  I bought the DreamColor used, and in all other respects, it seems to work very well.  The original owner didn't have it calibrated within a certain time, but said that having had no problem with the previous calibration.  I installed the last APS (version 2.0) and updated to the latest firmware.  These updates produces no change in recognition USB problem.

  The interesting thing is, I was able to calibrate the Apple Cinema Display, using the same configuration of connection (mouse, keyboard, and HP eye connected to the computer via the LP2480zx) APS was able to see the USB connection and this very well calibrated monitor.

  I had trouble with this problem for a few days.  I've looked around quite a bit online and found a few others who have this same problem, but I did not yet find someone who can point out a solution.  If anyone has had this same problem, or has heard of results that correct it, please let me know, because it's very frustrating.

  Thanks for any help

  Clay

  An update to my previous post, I realized a work around for this problem.

  Apparently, this problem has to do with the Dreamcolor screen and/or software APS do not like working with 64 bit systems.  I'm not saying that it is always the case, but I saw the other posts on this problem on 64-bit systems, and I spoke with two other people personally who told me that they also had the same problem, try to calibrate its Dreamcolor monitor when it was attached to a 64-bit system.  HP does not seem to be concerned about this problem, because they do not even recognize its existence, but since I'm far from being the first to report this problem, he's obviously not a one-time problem.

  My solution was this: I had connect the monitor to a regular running XP 32 bit system.  After I did, I could re - calibrate the monitor without the problem of USB connection.  This isn't a very good solution because not everyone has access to several machines, running different operating systems.  But it's a work around, and it worked for me.

  Hope this helps other people who have this same problem with their Dreamcolor monitors hooked to their 64-bit systems.

  Clay

  PS- I posted this as resolved, only because I was able to calibrate my monitor.  It's not really solved the problem, but it gets the monitor working again.  Maybe HP will address this problem in the future, but I'm not holding my breath.

• How to create a guest account? I followed the instructions and it says that it does not recognize the user!

  I followed the instructions to create a guest account and it says that it does not recognize the user's address or the password.

  Hello

  1. What is the operating system installed on the computer?

  2. are you trying to create or attempt to activate the guest account?

  3. How have you tried to create the guest account?

  4. What is the exact error you get when you try to create the guest account?

  Perform the steps in the articles to create a guest account and check if the problem is solved or not.

  Turn the guest account on or off (Windows 7)

  Turn the guest account on or off (Windows Vista)

  Hope that helps.

• error 0x800ccc78 server does not recognize my email address...

  0x800CCC78 server does not recognize my email address... any help here?

  1. Version of Windows?
  2. E-mail program?
  3. Who is your mail server?
  4. Please post any error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread. Just the number of code alone is not enough.
   
   

• PIX 515 does not recognize the DIMM 128 MB

  PIX 515 does not recognize the DIMM 128 MB. Won't recognize only 32 MB. Also when the upgrade to 7.0, I get an error message that it has not enough flash, but I have 16 MB of flash needed.

  PIX 515 not recognizing 128 MB may be due to, in my opinion, pix-515 supports 64 MB. PIX-515e can support 128 MB. Now error Pix by reading not enough flash I got the same message when I tried to load 7.0 release using the tftp with padding interface configured to the local network with an attached TFTP server segment. I then tried the interruption during the startup control method, once the PIX reached ROMMON > issue 'auto of e1 interface', 'address 10.0.0.1', server 10.0.0.2, there are a few other commands. You may be familiar with them, otherwise use find under cisco.

  HTH

• Power mac g4 does not recognize the DVD/CD drive.  It has worked very well in Leapard

  I just newly installed Tiger on my PowerMac G4, and now it does not recognize the DVD/CD drive.  I did all the updates and it does not see the DVD in the DVD drive.  It works perfectly before a new clean install DVD of the Tiger.

  What is your indication that the DVD is not recognized?

  Run the utility disc with the disc in the optical drive.  The drive will appear in the sidebar of disk utility?

  I did all the updates and it does not see the DVD in the DVD drive.

  If you put another type of disc in the optical drive, as a music CD, it is recognized?

• I uninstalled flash on my mac now youtube videos will not play. the error says safari does not recognize the video formats available.

  I uninstalled flash on my mac now youtube videos will not play.

  the error says safari does not recognize the video formats available.

  Reinstall the Flash Player... Why did you remove it?

  Barry

• I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.

• Siri does not recognize the voice.

  My Apple TV remote Siri works fine, but only of Siri does not recognize the voice. I just bought last month. No gross State aid.

  Are you pressing the button of Siri (micro) when you talk?

  Have you enabled Siri in settings > general > Siri?

  If so, then try a reset by unplugging the power cord for 30 seconds.

• ITunes does not recognize the phone

  IPhone SE, Windows 10, update ITunes, McAfee

  Connect the phone to the computer and the window phone company recognizes the phone immediately.  I close the phone company of the window and open ITunes.  ITunes does not recognize the phone.  I have the menu bar, select file > currencies, all the options are greyed out.

  Disable McAfee, and then try again.