My laptop does not do anything on the screen

Similar Questions

• My Satellite P300D starts but does not display anything on the screen

  When I start my laptop it turns on but shows nothing, sometimes it works perfectly, and after that when I restart my laptop the screen remains black. Sometimes the screen just after 2. 3. Turn - offs, but sometimes not.
  Sorry for the bad English, I hope you know what is my prolem...
  Ty :)

  I know what your problem is, but the question is why this happen. Is this problem occurs sporadically and to me it looks like a connection problem. On this virtual path, it is not possible to provide the exact diagnosis.
  That may be, is contact FL inverter, contact screen motherboard or something with the graphics card.

  In any case, it's probably unwanted material.

• When I try to start my computer, it does not load anything. The backlog, but the rest of it runs bad and slow. I can't open any programs that either, and my pointer always told it to load.

  Original title: Please HELP

  When I try to start my computer, it does not load anything. The backlog, but the rest of it runs bad and slow. I can't open any programs that either, and my pointer always told it to load. Safe mode works, but I just don't know what to do. Help, please

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Since it works fine in safe mode, I suggest you to try to perform the clean boot to safe mode and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Method 2:
  Also, try to run the safe mode System File Checker and check if it helps:
  http://support.Microsoft.com/kb/929833

  Method 3:

  Be sure to run a full scan with your antivirus software.

  http://www.Microsoft.com/security/default.aspx

  It will be useful.

• Camera slider bug? When I press 'C' the cursor of the camera does not instantly change on the screen. Why?

  When I press 'C' the cursor of the camera does not instantly change on the screen,

  only after that I moved my mouse t - it change. Why is this?

  This is fixed in the 2014.2 effects after update (13.2), which is now available.

  Details here: http://adobe.ly/1IVopxh

• Satellite M30X-111 screen does not display anything but the external monitor works

  My laptop just screen does not display anything (like when the computer is turned off), but when I connect the external monitor, then the desktop is displayed on this screen. I tried to recover the laptop using the recovery disk and it worked again, but today, it stopped working again.

  Again, I must plug the external monitor, and after I tried to restart, I continue to pressing F8 but the startup mode is not come, the noise of when you press a button for too long beeps, however, the monitor of the laptop working again.

  How can I solve this problem?

  What do you do? You want to recover the laptop?
  If Yes, you n press any F8 but you will need to boot from the recovery CD by pressing the C key immediately after starting the laptop.

  But this question seems that you have accidentally switched to external display.
  I recommend checking the Fn + F5 option. This combination allow you to switch between the display and the external monitor.

• HP dv6t 3100 laptop does not turn on (but the light)

  Hello...

  My laptop battery 3100 dv6t has is not good enough. It doen't take the load. Power goes off when the laptop on. Suddenlty it will turn off and now I can not turn on. But the charging light turns red for about 1 minute and it turns white after that. But the laptop does not light. What should I do? Help, please.

  Thank you!

  Hello kelum17,

  Welcome to the HP Forums! I hope you enjoy your experience!

  I understand that your computer will not start correctly. I will do my best to help you with this problem! For help, try the procedure described in this document from HP: computer does not start

  This document contains the steps such as resetting the laptop and more, corresponding to the exact symptoms. I believe that this document will solve the problem. If this isn't the case, I would contact HP support by phone using equipment. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide
  
  Please let me know if you have any questions or concerns. Thank you for bringing This problem on the HP Forums. Have a great day!
  
  Mario

• Photoshop CS6 does not open, stuck on the screen 'digitization of the presets' loading / Mac 10.11

  I've just updated my adobe suite, now, photoshop does not open, stuck on loading screen "scanning presets."

  Hi brentb,

  Would suggest you to run Photoshop with the SHIFT key and click Yes to skip loading additional plugins and check if it works very well.

  If this is not the case, share less detail for assistance:

  • What version of Photoshop are you using?
  • Operating system: mac or windows?
  • It is the first launch or it was working fine before?

  Kind regards

  Claes

• USB on the laptop does not read anything that is connected to them

  USB on the computer laptop does'nt read whatever it is connected to them. For example, I plug the mouse, the light on the mouse turns on but does not move, Device Manager does not read install is not reading .What do that?  Laptop is hp athlon.

  Hello

  See the link below:
  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive:
  http://support.Microsoft.com/kb/925196
  Let us know if that helps.

• On NEW laptop keyboard does not work after that the screen keyboard has been activated and then deactivated.

  Look at my friend got a new laptop and went through the whole upward. the on-screen keyboard has been activated which invalidates the real keyboard when the on-screen keyboard has been disabled the real keyboard has NO return. If this is a bug... Fix it. This is not a driver issue, it is not a user error. Stop giving people answers, trying to pretend like it's not not the OS when most people already know that it is.

  I'm sorry, but I didn't not new meant only one day.  And when I got my new laptop, one of the first things I did was to create a point of files, even a day later I had a restore to use - point and that was possible here as well.  I'm sorry it wasn't the case.

  If the system restore option is not available, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, you can try to go into the BIOS during the startup (the key appropriate to push appear on the screen to enter the boot menu or boot installation - try them both in turn if both appear. It is possible that the BIOS contains an option to disable the keyboard (which may have been activated by the keyboard on the screen but not changed when disable you the on-screen keyboard) and you may need to re-enable manually.  There is a slight possibility, but it is an option to try.

  Another option to try is to set up a new user account that has never used the keyboard on the screen and see if the regular keyboard works when you connect to this account.  If so, you can simply treat the original as a corrupt account account and use the following procedures to complete the transfer.  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.

  I hope that one of these aid procedures.  I'm sorry if they seem to 'generic', but we do not really know what is the problem - especially since the system is new.  We try and identify the cause and fix the problem at the same time using the procedures available to us.  I suspect there's a registry tweak will correct this problem, but I went through the whole registry, and although I found several referencers keyboard, I could find no which seemed to control or not activate the main laptop keyboard (though it has been in one of the entries that has been encoded in binary that I couldn't read).  It's possible someone who knows more about the registry will respond to this issue with a proposal to amend (or perhaps another solution).

  I hope that one of the solutions I proposed works.  Please post back in all cases we will know whether or not to continue searching for an answer.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• .chm TOC using variables - print SSL does not recognize anything after the variable

  Here's something interesting that I came across today.  I think that maybe it's a bug in RH 10.

  I create .chm TOCs using variables.  For entries of table of contents of page, a content before the variable in the table of contents entry converts to the table of contents printed without problem.  But any content after the variable is ignored.  It's only a problem with the pages in the table of contents.  Books are very good.

  For example:

  Book TOC:

  "Clinic - {variable} {variable}.

  This translates very well to the table of contents printed in printed documentation SSL.

  Table of Contents Page:

  "Clinic - {variable} {variable}.

  Aside from the link in the table of contents page, the code for the TOC book and page table of contents is the same.  But, for some reason, anything after the * first * variable in the page table of contents is ignored in the table of contents printed for printed documentation SSL.  It doesn't matter if it's another right or variable text.

  

  In the image above, both the "clinic - display the list of participants in the" book of the TOC and TOC page on the left contains two variables:

  "Clinic - {variable} {variable}.

  On the right page "Clinic - Participant list", the variable "screen" is ignored and deleted page table of contents only when the layout of the chapter is created for printing SSL.  HR will remove anything after the first variable in the table of contents page, whether it's a text variable or right.  HR does not remove the antything of a book TOC when the presentation of the chapter is created for printing (visible in the picture above).

  Post edited by: eeddings - added image to visually show the bug.

  When you generate print books will go in the printed document.

  Pages in the table of contents of the document are not based on what is in the table of contents above, but on the topic title.

  Add the variable there and it works.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• When I try to send an e-mail, it does not type anything in the space above the "original message." How can I fix it?

  The question is in the title. I am not able to type anything in the top part of an email that I try to convey. How can I fix it?

  I would guess that expedia use iframes and tables which just don't drive well in Thunderbird.

• The 'Awesome Bar' does not work. He does not remember anything of the bookmarks

  Just updated again Firefox. In the past, when I'd start typing a site in the firefox address bar it would complete as it was already in my favorites. But now it does nothing. It just sits there waiting for me the full address. I could start typing Netf and it automatically end Netflix.com

  Why is happening. Also, for the first days of the new version I had to go back in the tools, Options and reset things at least 3 or 4 times before they finally remained as I wanted.

  I would say he never remember history and after while I would look and he said, do not forget history. I wanted a blank start page, and not to change it. It's normal now but the Awesome Bar does not at all.

  Your bookmarks are displayed in the drop-down list auto suggestion?

  Otherwise: Under Options > confidentiality, in the lower part, does always show that Firefox should suggest bookmarks in the location bar?

  If auto-suggest works but the AutoFill does, you may check that it has not been disabled here:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste autofs and make a pause so that the list is filtered

  (3) If browser.urlbar.autoFill preference is "BOLD" and "user" false, double-click it to change its value to the default value true. It should work in new tabs.

  It already is the value true, hmm, I wonder if there is a problem of private browsing? (I didn't test with automatic private browsing).

• Laptop does not turn on but the power button is on ip

  I just bought my HP Pavilion 360 less than a month ago and it's been used for research and schoolwork. No virus or threats have been detected. It was working fine today until I had to load it. When it was fully charged, I turned it on and the screen just frozen. I tried to shut down by pressing the power button, but it did not work. Now, to just black screen but the power button turned on (meaning it's on). What should I do?

  1. don't remove the battery from your laptop

  2. just to unplug the AC power from the laptop adapter

  3. press and hold the power button on your laptop for 1 minute

  AFAIK, this should make the difference

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• My Windows Vista laptop does not start successfully after the upgrade to SP1

  I use Windows Vista Home Premium. I've updated my laptop with Vista service pack 1. After that my laptop will not start, it displays a message saying "Service Pack did not install. Restoration of the changes. Do not turn off computer. "after windows loading and then the computer restarts and the same thing repeats. I also didn't get a vista CD or a restore with my laptop CD. I tried a solution anywhere, but I couldn't find one. Please help me quickly because I do all my work laptop and I don't don't want lose my files.

  Perhaps you should review this KB

  Things to know before you download Windows Vista SP1
  http://TechNet.Microsoft.com/en-us/windowsvista/bb968859.aspx>

  Information about Windows Vista SP1
  What you need to know before you install Service Pack 1
  http://support.Microsoft.com/?kbid=936330>

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366>

  How to uninstall Windows Vista SP1 as a troubleshooting step
  http://support.Microsoft.com/kb/948537>

  Windows Vista Service Pack 1 is not available for installation from Windows Update and is not offered by automatic updates:
  http://support.Microsoft.com/?kbid=948343>

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx>

  Windows Vista Service Pack 1 standalone installation) (KB936330)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en>

  Go to your retail store, they should have the disk recovery for you or you need to go to your manufacturer directly because the manufacturer is best qualified to support the software that the manufacturer has installed on the hardware, provide your serial number and order the CD on their part. I bet they arrange an expedition to the France and tax treatment for it, but should not be too much.

  Note: The manufacturer was required to provide a way to reinstall Windows. If it is not a set of disks with the computer, there will be a hidden restore partition (do not be confused with the system restore), you would use to return the computer to the State of the OOBE (Out of Box Experience).

• my laptop does not recognize two of the three partitions. They show as NTFS only

  then, when I open the tab of the computer to look at my hard drives. He initially present with three hard drives with bars informing me of the ive of space used and the space that is open. now, it comes with the hard drive of 1 have the information bar and 2 and 3 have only NTFS letters with no bar. However earlier when I start my computer all hard drives would have the info. bar below them up to what I would like to access. shortly after, they would disappear off the screen (everything that would be in the area a hard drive, an and an another device. HDD 2 and 3 would be same there to click on). I restarted my computer a couple of times now.i have been researching running a diagnosis with little result. If tried looking for more on that NTFS is with little result. I tried analyzing and defraging the hard drives, but disappears shortly after the start to the top. Ive tried vibrions a search and correction program that is located in the Properties menu of hard disks. I ckecked the connection of hard disks of the computer, making sure that they are connected correctly (they are).

  and because of this problem I bought an external hard drive and I'm trying to save what I left on my computer. However it is said that the backup has expired after so long. What is also gives me grey hair.

  hit me if you have any other questions

  Hi Gadlington,

  Have you done a recent software or hardware changes to the system?

  You can check the article and if it helps to solve the problem:

  My drive does not appear in Windows Explorer

  Important: The above link contains steps to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information, you can view the article:

  Back up the registry