My laptop has Qualcomm Atheros AR956x Windows 8, I can't get 150Mbps, my old laptop can get 300Mbps

you just bought a laptop Toshiba L50-A0138GB

  • 2.4 GHz 3rd Gen Intel i7-3630QM Quad Core Processor
  • 8 GB OF RAM (4 GB + 4 GB)
  • 750 GB hard drive
  • Chart 2 GB dedicated
  • 64-bit Windows 8
  • Qualcomm Atheros AR956x wireless adapter

another my old laptop last year, able to join the network, 300Mbps full bar signal, my new laptop Toshiba comes right next to the router, full bar but 150Mbps, why?

Unable to find any response on the web...

update all drivers of web, windows update... still at 150Mbps...

my router is Netcom Nb304n

Please tell me what to do to improve.

Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

Tags: Windows

Similar Questions

  • Qualcomm-Atheros AR956x WLan adapt does not not on Windows 10

    Have installed the latest driver for 64-bit windows 10 of Qualcomm-Atheros site. 10.0.0.329 driver version but it does not recognize my home wifi signal, while it did 2 weeks ago. Apparently some 10 windows update is now conflict with this version of the driver? Read a lot of similar problems on various internet and learned there is no solution, so now I have to connect to the internet using a cable. This turns my lap - top in a table. Thanks to Toshiba and Qualcomm Atheros for the * ty support. One of the users have a fix for this problem? Looking forward to your help!

    I have the same problem that started after the latest updates of windows 10, I can get my wifi works by doing a full restore but within hours 10 Windows downloads an update, and wifi is lost again.

    I get online answers but do not yet have a solution so attached to the router wired for internet access.

    Seems to me that Qualcomm Atheros and windows need to come together and find a solution.

  • Satellite C50 - Qualcomm Atheros AR956x driver /wifi fall

    My Tosh c50 with Qualcomm Atheros AR956x adapter keeps dropping its connection with the blank superhub.

    The most recent drivers have been installed through Microsoft update, after the win8.1 upgrade.
    Queries of blank media if the pilots were from Atheros.

    Where on qualcom or Atheros can I have the latest OFFICIAL drivers?
    The laptop is fine with the Ethernet cable.
    In SIDDer allows to check the channels and power.

    It's very frustrating as just cannot be used for banking, shopping, the connection is lost.

    See you soon

    The Atheros WLan driver for your laptop model can be downloaded from the Toshiba driver page.

    But the fall of connection Wlan has not must be linked to the WLan driver.
    The question appears using the power of battery or as then as the connection?

    Have you tested different WLan (802.11 A B G N) standards?
    What about WiFi encryption?
    He doesn't interrupt the connection using a combination of different (WPA/WPA2 AES, TKIP) or connect to open WiFi?

  • Replace the Qualcomm Atheros ar956x in Satellite L50 - B

    Hi all

    I am wanting to change the existing WiFi card in our Satellite L50 - B (Qualcomm Atheros ar956x) due to the limitation of speed of connection 150 Mbps! We have a router AC and I move 800 Mbps!

    I was hoping to use an Intel® Dual Band Wireless-AC 7260 however the cards seem to be physically different.

    Any ideas would be great!

    see you soon

    Scott

    Hello

    Found some details about this Intel WLan card on the page of Intel:
    http://Ark.Intel.com/products/75439/Intel-dual-band-wireless-AC-7260

    + Board form factor: half a PCIe card Mini / m2 (NGFF).

    As far as I know the WLan module that is built into the laptop supports Mini-PCI card format.
    So, you have a miniPCI module.
    But you should consider BIOS support. Not all wireless network cards could be supported by the BIOS.

  • my windows Explorer has stop runing on windows vista, how can it be fixed

    my windows Explorer has stoped working cant use program that you use in windows. Impossible to update, delete. Unable to get something that you use in windows Explorer.

    Hello

    First use the last link in this troubleshooting, then use the other methods to try to resolve the problem.

    -----------------------------------------------------------------------------------------------------------------------

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    ----------------------------------------------------

    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    ===========================================

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ===========================================

    Refer to these discussions because many more excellent advice however don't forget to check your antivirus
    programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
    first.

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/GP/slow_windows_performance/en-us

    Performance and Maintenance Tips
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

    Explorer Windows stopped working
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

    Hope these helps.

  • I see that Outlook express has been updated for windows mail, but what if I want my old mails from outlook express how I recover their

    I want back my old mails from outlook express

    FYI: OE last used in XP. Vista is the only OS to use Windows Mail. OE and WinMail have been abandoned in June 2006.

    Import messages into Windows Mail from Outlook Express
    http://Windows.Microsoft.com/en-us/Windows-Vista/import-messages-into-Windows-mail-from-Outlook-Express

  • How to activate bluetooth Qualcomm Atheros AR3012 on laptop Asus when "Windows could not activate the device (the function of bluetooth?

    airplance mode: off

    WiFi: connected.
    Bluetooth: off
    Ultrabook ASUS, bought on 14 April 2013
    Qualcomm-Atheros Bluetooth 4.0 AR3012 + HS
    Unable to activate the device.
    Basic troubleshooting done:
    1. reboot the PC
    2. activate and deactivate the airplance mode
    3. put updated driver
    Impossible to activate bluetooth
    error message: windows could not activate the device.
    tried steps 1-3 again me. same message showed.
    no other device is connected via USB when trying to enable bluetooth.
    known issue after removing antivirus software and install another antivirus software. but now I'm running on windows Defender.

    Hello

    Thank you for the update.

    As none of the above suggestions work, I suggest you to contact the Asus support for any future reference.

    http://support.ASUS.com/ServiceHome.aspx?SLanguage=en

    Feel free to contact us for any other questions related to Windows.

  • Windows WiFi 8 HP 2000-2b43dx guard abandon the Qualcomm-Atheros connection

    I just got a laptop HP 2000-2b43dx last month and had no problem with the connection before fall, but here for the past week or so she did it a lot. It starts to get boring, that's why I'm here.

    If I close my laptop and open it again it will be disconnected and I have to reconnect manually even if I have the settings in automatic mode.
    And every now and then it disconnects randomly, and I have to reconnect again. It's really annoying when you try to play a game and you get kicked out of a game because of that.

    I've updated the network driver and the only thing that helped was able to reconnect faster...
    My old laptop has never had this problem and it only recently started to do a few weeks back.

    I have an AR9485 of Qualcomm Atheros 802.11b/g/n WiFi Adapter.

    Can anyone help?

    Sorry... I forgot to post the thread I referenced.

    http://h30434.www3.HP.com/T5/wireless-Internet-home-networking-e-g-Windows-8/Atheros-WLAN-driver-fixes-connection-issues-with-many-new/TD-p/701407

  • HP 15-f039wm: Re: qualcomm-atheros wifi adapter does not work with windows 8

    Hello HP support.

    I have a HP 15-f039wm, product J8X12UA #ABA, running Windows 8.1.  I like it, but I thought I could improve it by upgrading to 8 GB, installation of a 240 GB SSD and move the 500 GB HARD disk to an external USB adapter.  So far, so good, so very jolly good.

    I also wanted to upgrade the Wi - Fi adapter to a faster power adapter with Bluetooth 4.0, but instead to get the AC7260 from Intel, I settled for a Qualcomm Atheros AR9485 with the Bluetooth BT3012 device, which belongs to a HP, I think.

    I shouldn't have paid.  Too late, I learned that the Atheros AR9485 has major compatibility problems.  Microsoft compatibility survey shows that some 530 speakers, 357 note as incompatible AR9485.

    This pair Bluetooth adapter and connects with my cell phone, but it remains connected for less than a minute before it disconnects.  It does not connect with something else I have.  It does not recognize my Bluetooth phone earpiece, and he recognizes that rarely my Bluetooth keyboard, with which it will pair but it never connects.

    The keyboard is a deal breaker - a must - have - and something really nice.  I tried the same Bluetooth keyboard sold by comb and Arteck jelly and a similar one by the EC technology, which has the top two rows of keys merged into one.  They connect immediately with an IPhone 4, but none of the three would be in contact with the BT3012 in my HP 15 - f039wm.

    Microsoft recommends the most recent drivers as a fix for incompatibility issues.  I downloaded the NIC drivers and card with Bluetooth Bluetooth drivers for the AR9485/BT3012 of http://www.station-drivers.com .  That updated the Qualcomm Bluetooth driver version 8.0.1.273, date from mid-2013, that came with the BT3012 (AR9485) Microsoft version of the driver 8.0.1.344 card, day 23/04/15.  Even still, it connects to my cell phone but nothing else.

    "Allow Windows to turn off this device to save power" is not checked for the adapter.  I also ran the 'netsh' command to clear the TCP/IP stack and reset the Winsock Catalog.  I have no intend to restore Windows to the factory; before that I would, I would get the Intel AC7260 more expensive card - that I probably do anyway, given the record of the incompatibility of the Qualcomm Atheros AR9485/BT3012.  I do not expect to change this folder, no matter what I do.

    But I'm open to suggestions.

    Thank you in advance for taking the time to investigate this problem.

    Hi @gospelmidi,

    Thank you for your inquiry.

    I take that you have swapped the hard drive and replaced the original card wireless and Bluetooth with the Qualcomm Atheros AR9485 with the Bluetooth BT3012 device and cannot associate with something other than your cell phone.  You tried to reset the TCP/IP stack, but there was no change.

    Did you run HP Support Assistant to ensure you have all the updates from HP?

    Have you tried to run the troubleshooter in Windows?

    Alternatively, you can try the following steps.

    Step 1. Go to Device Manager
    Step 2. Right click on "Bluetooth device" you want
    Step 3. Select "update driver software... »
    Step 4. Choose "Browse my computer for driver software".
    Step 5. Choose "Let Me pick from a list of drivers for devices on my computer.
    Step 6. Select "Ports (COM & LPT)"
    Step 7. Select "Microsoft" to the list of "manufacturers".
    Step 8. Finally select "Standard series via a Bluetooth connection.

    If you are unable to connect to a Bluetooth device, try the following:

    Step 1. Search for 'Change device' in the start menu in Windows 8.
    Step 2. Click on where it says change device installation settings.
    Step 3. Select No, let me choose what to do option.
    Step 4. Check the automatically get the device app option
    Step 5. Click on save changes to save the settings that you select

    So, you can try this

    Step 1: Go to RUN (Windows Logo + R) and type "services.msc" and Enter
    Step 2: Now find 'Bluetooth Support Service' and double click it
    Step 3: Now click on the Log on tab and type "Local Service" without the quotes
    Step 4. Click on "account".
    Step 5: Now remove any authorization of passwords the password field blank
    Step 6: Below the upper left title should be a hyperlink 'Start' click

    If the problem here is a link to HP 15 Notebook PC Maintenance and Service of Guide for your laptop.  Please note Chapter 3, page 17, section 17 for recommended replacement cards.

    To say thank you for answering, please click on the thumbs up icon below.

    If this fixes your problems please let know in choosing the solution to other people.

    Good luck!

  • HP Pavilion 17 t J5R51AV: driver for Qualcomm model Atheros QCWB335 Windows 7 (64)

    Hello. I'm looking for a Driver for 7 (64) of Qualcomm Atheros model QCWB335 for Windows. (802.11 b/g/n WLAN and Bluetooth (r) [1 x])

    I tried HP support system discovery and recommended pilot report, he reads material and product incorrect.

    I tried this solution forward to backwards compatibility, but it did not work. http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/driver-for-Qualcomm-Atheros-model-QCW...

    My laptop is a HP Pavilion 17 t (f000?)  P/N: J5R51AV

    I updated the BIOS to F.34

    Windows 7 Ultimate (64)

    Sp67265, sp68433, sp67625 drivers installed and cannot install the sp66402.

    Œuvres Ethernet, WLAN and Bluetooth connection are not.

    The WLAN and bluetooth worked well with Linux Ubuntu 14.04

    History of the laptop

    5 February 2015 ordered from the factory:

    HP Pavilion 17 Windows 7 Professional P/N: J8H36AV t with 802.11 b/g/n WLAN and Bluetooth (r) [1 x]

    Received:

    HP Pavilion 17 Windows 7 Professional P/N: J5R51AV t with 802.11 b/g/n WLAN and Bluetooth (r) [1 x]

    Out of the box, worked very well. I tried to install Ubuntu as a dualboot and discovered, I would need to tweak the installation of Ubuntu to work with 4 partitions that HP had already put in place on the hard drive. Instead, I have supported Windows with Windows backup, created a recovery disk bootable on USB using the HP Recovery Wizard. The Recovery Wizard HP said that the recovery USB disk has been a success.

    I reformatted the hard drive the Sina Active @ killdisk and installed Linux Ubuntu 14.04 successfully. All on the cell worked, including WIFI and Bluetooth. Backup Ubuntu using Ubuntu backup and also created a clone of the hardrive using Clonezilla live 2.3.2.

    Attempted to boot from HP Recovery disk on USB and it failed. Tried again, failed. Contacted HP, they have graciously sent free recovery disks. Only, they sent the recovery disc for Windows 8.1, so I contacted HP and they sent free the recovery disc for Windows 7.

    Recovery disks would work almost throughout the installation of Windows, which gives 3 errors and allowing a Setup log can be fully copied. The errors were "chkErrBB.CMD detects an error during PININST_BBV.", "check c:\system.sav\logs\BurnBootWarn.log." and "check c:\system.sav\logs\BurnBootMerg.log." Analysis the hardrive shows 4 partitions factory HP installs have been installed, the Windows shell folders folders.

    HP support had me has contacted and suggested I send the laptop and pay to install restore it, and instead I bought Windows 7 Ultimate for a clean install.

    Using the HP driver support tools, it indicates the portable bad and suggests drivers for WLAN radio that I have not installed on the motherboard.

    I've updated the BIOS F.34 and which did not help.

    I don't know how to extract the driver from the HP driver and utilities recovery disk HP sent me, it is in a file format that I don't know how to handle.

    I can connect to the internet via the ethernet cable, but not the WLAN.

    Hello:

    See if this driver works...

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_128686_1

    You also need this driver BT...

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_126765_1

  • The Qualcomm Atheros AR5BWB222 Wireless Network Adapter adapter has driver - or hardware problems

    It's for my laptop Acer Aspire V3 - 771G who has internet CONNECTION problems. I was able to connect fine until windows 8, now I can only connect using the hard line. I ran a bunch of updates, driver downloads and etc means for this model directly on the Acer website for the upgrade of windows 7 to 8 and I had no chance.  However, this message appears when I try to fix the problems of network adapter "the Qualcomm Atheros AR5BWB222 Wireless Network adapter adapt knows driver - or hardware-related problems".  Any help would be greatly appreciated.

    I FIXED IT ALL! :) Simply drag or type at the top right of your screen to open the SEARCH option. Research of Control Panel. Click MANAGE the DEVICES.  Now, you can either search for the driver who is broken or defective write his name uninstall, and then reinstall it from the web (recommended to go to page creator ex; atheros was mine so I have downloaded from them.)  If you have no W/LAN driver then go to your website of the laptop manufacturers and find the necessary driver for your model :) I HOPE THIS HAS HELPED!

  • My laptop cannot connect to the internet with the error (code 31) Qualcomm Atheros AR9485WB-EG Wireless Network Adapter

    Hi, my laptop have this problem cannot connect to the internet, but the bar shows that I am connected to the network, but without access to the internet.

    I tried someone's guide to uninstall the network adapter in Device Manager and then reinstall it again, but now I'm stuck with the laptop cannot even detect the wireless network and the "Qualcomm Atheros AR9485WB-EG Wireless Network Adapter ' on Device Manager displays this message"the device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"

    I forgot since when this problem persists.

    Please help me with this problem of internet connection,

    List of maybe / don't may not be the problem:

    1. I had mcafee antivirus 3 weeks around which has already expired for about 50 days and I uninstalled to turn into kaspersky anti-virus

    2. my windows is still 8.0

    3 ASUS N56V

    4. browser chrome incognito window

    Thank you Mr President, I found a solution for this problem

    I just turn on the download via connections counters my PC-> devices config->download via connections counters

    and then I tried to enter the following command at the command prompt run as administrator

    netsh int ip reset c:\resetlog.txt

    I hope this helps anyone else having the same problem as mine

    Thank you again Sir

  • Cannot install Qualcomm Atheros QCA 9000 Series Wireless LAN Driver for Microsoft Windows 8.1

    I tried several times to install the driver Qualcomm Atheros QCA 9000 Series Wireless LAN for Microsoft Windows 8.1 in my HP 2000 Notebook PC via HP Support Assistant.  It downloads fine and looks through the installation process, but returns a gray "x" and seems not to install this driver.  Have same problem with Cyberlink Media Suite 10-Office Update, also.

    @WalterPowers,

    Thanks for posting.

    It is possible that there is a problem with the wizard for help where, you may not be able to install the drivers using the program. I would like to troubleshoot the software itself by following the ideas of SuperMario1 in this thread: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/HP-Support-Assistant-Window...

    Also, you can try to install the Qualcomm and Cyberlink yourself. If you go to HP.com, click on support and troubleshooting omn. Drivers and downloads, enter the model number of the laptop, in research. You will be brough to a page where you can select drivers for your product, after selecting a BONE.

  • Qualcomm Atheros AR9485 Wifi adapter closes unexpectedly after Windows updates

    We have a HP laptop, experiencing repeated problems with the AR9485 of Qualcomm Atheros 802.11b/g/n WIFI adpter following updated Windows.  Since we can not get online, we are unable to update the drivers.  Provides basic troubleshooting "Wifi adapter is experienceing driver or hardware related problems.  The device status shows "this device cannot start (Code 10) Operation Failed."  Any suggestions?

    Hello:

    Download this driver... Do not run it immediately.

    This package contains the driver installation package for LAN Qualcomm Atheros QCA9000 wireless controller series in models of laptop support and operating systems.

    File name: sp70859.exe

    Go to Device Manager and right click on the map the problem wireless.  Select uninstall.  Check driver uninstall, reboot and now the driver I posted and see if it works.

  • Cannot install "Qualcomm Atheros QCA9000 series Bluetooth 4.0 + HS Driver for Microsoft Windows.

    Hello

    I use an HP Envy 15 J049tx laptop.

    I am facing an error during installation "Qualcomm Atheros QCA9000 series Bluetooth 4.0 + HS Driver for Microsoft Windows.

    It displays an error such as,

    «The device may not be present or could be ejected/disconnected from the system...» Insert or reinsert now. »

    What should I do?

    Hello:

    According to the list of parts on the link below, your laptop is with Bluetooth 4.0 Ralink wireless card.

    http://PartSurfer.HP.com/search.aspx?SearchText=F2C59PA

    Therefore, you must install the Ralink bluetooth driver and software for the Ralink, not the Atheros one wireless card.

    This is probably the reason why the driver cannot find the atheros bluetooth device (because your laptop lacks an Atheros wireless card).

Maybe you are looking for

  • How to create iMessage timestamps

    How can I create a timestamp in iMessage settings so I get info date and time of each text message I get. I have Android and it's automatic. It of not a big deal, but may be useful in trying to remember when you sent or received a message. Here is an

  • Satellite 1800-400 additional memory

    starting at the... legacy laptops a satellite s1800-400 with 128 MB of ram and 20 GB hard drive. want to upgrade the ram, but what do need me and how do I do it?

  • LaserJet M1212nf MFP: Spring / roll jumped out of scanner flat.

    I had a paper jam while I was scanning several sheets in the feeder.  I opened the lid of the scanner and a spring / roll came out.  I am still able to print and scan from the tray, but I'm not able to use the charger.  I have attached a photo of the

  • IMac early 2009 negotiated 1.5 Gbps speed

    I have an iMac early 2009 in which I installed a Sandisk Extreme Pro 480 GB card in the optibay. I then put on a new install of OSX EL Capitan. The drive is still showing a negotiated rate of 1.5 Gb/s NVidia MCP79 AHCI: Provider: NVidia Product: MCP7

  • 32-bit Vista Home Premium - Library visual basic runtime C++ crash Explorer.exe

    Friends, By inspecting some messages on the map, I saw this error discussed before, but not in this context. Background: Running 32 - bit Windows Vista Home Premium (SP2) on an of Gateway GM5664 desktop (2.3 GB AMD Quad - core CPU with 3 GB of RAM).