my laptop has very little noise. I tried to put it up his still does not

Similar Questions

• The plus sign next to my tab stopped working: when I click on it nothing happens. I tried uninstalling and reinstalling and it still does not work.

  The sign + to add a new tab has suddenly stopped to work earlier. I tried uninstalling and reinstalling and it still does not work. What can happen and how to fix it?

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• My creative cloud no longer works. When I try to reinstall, I get the message "AAM cannot initialize. I tried all the instructions but it still does not work. Robert

  My creative cloud no longer works. When I try to reinstall, I get the message "AAM cannot initialize. I tried all the instructions but it still does not work. Robert

  Could you please mention the operating system?

• App Builder install-tried all the recommended fixes, but still does not work

  Hi all

  I've read similar questions others have had to install the generator of the app and tried the fixes suggested, but am still installation issues.

  I downloaded the latest version of the App Builder (32.4 I think), and am in Mac OS X 10.7.5. When I try to install I get the error "Sorry, year error has occurred." The application could not be installed because the Installer file is damaged. Try obtaining a new installation of the author of the application program.

  Just out of curiosity, I tried to install the same file on another Mac (OS X running 10.10.2) and installed without problem. If the installation file seems fine.

  Depending on the system configuration required, my 10.7.5 system must supports installation, so I don't know what else to try.

  Thanks, Louise.

  Ok. For assistance with this then, call the business support. You can find contact information by logging on http://digitalpublishing.acrobat.com/ and looking in the Middle at the bottom of the screen.

  Neil

• Cannot open PDF files in the browser. I tried every fix mentioned and it still does not work!

  I have Windows XP. Using firefox as my browser. All of a sudden, I can't open the PDF files in the browser. I tried all the mentioned patches. Nothing works! Check the configuration of the plugin, checked the settings Adobe Reader.

  Is the problem that Firefox opens a blank tab, or that it requires you to download the file?

  I guess you tried switching spectators between the internal viewer and the Adobe plugin. If this article does not, steps: How to disable the built-in PDF Viewer and use another Viewer. Sometimes behind switching will allow to correct an error in the settings file.

  You can rename or delete the settings file that stores these associations and have Firefox regenerate. If the file is corrupt, this could be the only option that works. Here's how:

  Open your current Firefox settings (AKA Firefox profile) folder using

  Help > troubleshooting information > "view file" button.

  Leave this window open, activate any Firefox window and quit the program (for example, the file menu > exit or Firefox menu > Exit)

  Pause while Firefox finishing his cleaning, then rename the mimeTypes.rdf to something like mimeTypes.old

  Restart Firefox. Your likely PDF preferences will be reset to the internal PDF Viewer, but you can activate the Adobe plugin as described in the above-linked article.

  Any improvement?

• Ive got windows xp... When I turn it on it starts windows loading ok.the icon rises then atfer a black screen and a message saying that the application has no enterliszed properely.then click ok to complete the applications.still does not

  applications has not enterlislze properely.click on ok to finish the applications.i done this but still don't work

  Hi Tracey341975,

  Your computer will load at all? If operations so the following, listed in the link below. If it does not start, please in safe mode by pressing F8 black of the screen before the windows logo and select Safe mode and perform the following, listed steps in the link below.

  http://support.Microsoft.com/kb/310353

  Let us know if your computer has no errors in case of boot. If it is not it means that you have an application that is causing this error, we can identify and solve.

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• PIXMA MG5220. While changing ink got the C000 error code. Tried to turn on. It still does not.

  I changed the ink when I got a C000 error code. He said turn the printer off, then on and if it still does not read the manual. The manual is no refernce this error code. Any ideas?

  Thanks in advance.

  Hello.

  This problem may occur when there is a loose object stuck inside the printer, or if one of the ink tanks was not sitting correctly.  Please, try the following:

  1. with the cover open, disconnect the power supply to the back of the printer or the wall.

  2. search for all objects or in the printer packaging material, delete if necessary.

  3 gently move as close to you as possible ink tank support.  Try to push the nearest ink tank down.  Once activated, try to close the ink tank support, repeat as needed.

  If you encounter resistance, do not go away while: support of the ink tank.

  If the error persists, find more help contact us.

• Good afternoon my windows live has been hacked and unable to access my account, tried to reset my password but still could not get my mail

  Good afternoon my windows live has been hacked and unable to access my account, tried to reset my password but still could not get my mail

  Hello

  The question you posted would be better suited to Windows Live Solution Center. I suggest you to send your application in the Windows Live Solution Center for better support.
   
  http://windowslivehelp.com/product.aspx?ProductID=15

• My flash player has been updated and still does not recognize that its been updated

  My flash player has been updated and still does not recognize that its been updated on sites like facebook. I restarted my computer several times, tried to reinstall the latest version of flash player, active manage add ons and clicked active x (all windows instructions). But while that in facebook, I can't download the images as I used to on my old laptop, its me to download 1 by 1, because it says that I don't have the latest version of flash player, BUT I DON'T!

  Flash Player in Windows 8 is embedded you do not download it and all updates are are through Windows Update. Hope this helps and if you need any additional aid station and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it employees, or any other Member of this forum.

  "When you try to pick out anything by itself, we find it hitched to everything else in the universe."-John Muir

• tried everyting to sort the "assertion failed" in LightroomCC, uninstall and installed it again, tried to check the photo folder in the user account, it still does not, PLEASE HELP!

  Had "assertion failure" at the launch of LightroomCC, tried everything help, uninstall and installed it again, tried to check the photo in the user account folder, still does not, PLEASE HELP!

  Thanks for the help.

  My computer scientist has created a new user in my computer and now the 6 Lightroom

  works very well.

  Thank you

• Cannot open iPhoto Library as it says library version is too old - have tried to download the iPhoto library valuation tool - still does not open.

  Hi, I saved my photos on my passport, since I upgraded my phone and now I can't open the photos as it says that the version of the library is too old. I've uploaded my photos from my old laptop to my new office using my passport and still can't open. I tried to download the iPhoto library valuation tool but still does not open. Can someone please?

  Thank you

  I tried to download the iPhoto library valuation tool but still does not open.

  But install you and run the iPhoto Library upgrade?  Just the download is not enough.  You need to open the library in upgrader iPhoto library and let it prepare the library.  After installation, you will find the iPhoto Library upgrade in the "Utilities" folder in the "Applications" folder

• CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

  CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

  Try creating a new profile as a test to check whether your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.org/KB/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If the new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• have toshiba LL850 want to resize image for the background but have tried most things and still does not

  I have a Toshiba L850 and try to mount an image for the background.  Have you tried the resolution of the screen to pull the lever, but still does not.  Can someone go through the steps for me please.

  Hi June,

  What version of Windows is installed on the computer?

  The articles below show you how to change the background image and set the Position of the image in the Center that it adjusts automatically on the screen.

  Items are for Windows 7 The steps are similar to Windows Vista and Windows 8. However please let me know what version of Windows is installed on the computer and I'll give you the steps for this operating system. When the computer restarts, you'd be able to see the name.

  http://Windows.Microsoft.com/en-us/Windows7/change-your-desktop-background-wallpaper

  http://Windows.Microsoft.com/en-us/Windows7/change-your-desktop-background

  I hope this helps. Get back to us if you need more help.

• HP keyboard model kg-0851, I tried all the steps from hp, but the keyboard still does not

  I tried all the steps from hp, but the keyboard still does not.  When I look at the Device Manager, it says that it is fine.

  Hello

  1. what operating system is installed on the computer?
  2 have. what troubleshooting measures you tried?
  3. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link:

  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

• My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  They are only updated office or all updates?

  For Office updates, usually to pick up the item at the: http://www.microsoft.com/downloads/en/default.aspx

  then manually download and install the same.

  If all updates, perhaps consider the following general tips-

  Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

  TaurArian [MVP] 2005-2010 - Update Services