My laptop is behaving strangely. Anyone know why?

Similar Questions

• Number keys don't work since the upgrade from vista to windows, anyone know why?

  Numbers on my laptop keyboard keys don't work since the upgrade from vista to windows7, anyone know why? Keys of numbers very well work in office and other software for browsers

  See the following troubleshooting steps below thanks Azam K with Microsoft Support:

  Try to activate the numeric keypad and check if it helps, here are the steps:

  1. open on-screen keyboard by clicking theStart button,all programs, Accessories, easy accessand then clickingOn-screen Keyboard.

  2. click onOptions, check thepad box and then clickOK.

  I also suggest you to start the computer using safe mode and check if it works properly, following the steps:

  1 restart your computer if it is running.
  2. tap on the F8 key after your initially on powers computer.
  3. Once you see the menu Advanced Boot Options, you can stop tapping.
  4. use the up/down arrow keys to highlight your selection.
  5. select Safe Mode and press ENTER.
  6. you should see loading drivers and wait please.
  7. you should then be at the Welcome screen.
  8. connect to your computer using an account with administrator privileges.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If it works fine in Safe Mode, then try to perform the audit and the clean boot, here's the link:

  http://support.Microsoft.com/kb/929135

  If it is not working in Mode without failure, then try the System File Checker and see if it helps, here are the steps:

  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. click on continue or provide administrator credentials if prompted.
  3. in the command prompt window, type the following text, and then press ENTER:
  sfc/scannow

  Here is an article that will give you information about Scan SFC:
  http://support.Microsoft.com/kb/936212

  I hope this helps!

  OT

  Change options for accessibility on Windows 7
  Control Panel
  l---> ease of access Center
  I---> make the keyboard easier to use
  I---> uncheck "turn on mouse keys.

• I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?

  I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?

  It is a decision that was made by Apple.  El Capitan is the newest OSX that will support a 2009 MBP.

  This is not uncommon.  My 2006 MBP came with Tiger, but is limited to OSX Snow Leopard.

  Old hardware ends up by becoming obsolete with newer technology.

  Ciao.

• I liked the old version of iTunes that allowed me to delete songs from my camera if I needed to make room for other things. Does anyone know why it was changed?

  I liked the old version of iTunes that allowed me to delete songs from my camera if I needed to make room for other things. Does anyone know why it was changed?

  You have to ask Apple why the design has changed. You should still be able to delete songs by changing your selection of synchronization and synchronize.

  Or you can delete songs directly on your iPad and other iOS devices, directly in the music app or via settings > general > storage & use iCloud > storage management > music

• My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green.  Wifi continues to operate even when the light is orange flashing.  Anyone know why this is happening?

  My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green. Wifi continues to operate even when the light is orange flashing. Anyone know why this is happening?

  The next time you see the flashing light amber...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Express

  If you see a button update, click on update the firmware on the airport

  

  Otherwise, find status and click on the little orange dot it. A message will appear to say why the airport complained and suggest a remedy for the issue.

• Does anyone know why the tabs on my firefox is no longer tell me the name of the IM site, they show just the symbol of the site IM on?

  Does anyone know why the tabs on my firefox is no longer tell me the name of the IM site, they show just the symbol of the site.
  I have the latest additon of firefox and only noticed this today... so not after I've updated, the name of the site appears if I move the mouse over the tab but it flashes and will not stay there, I can't seem to find a way to get the site back on the tab name... Help please!

  Hello, you can try to reproduce this behavior when you start firefox in safe mode, once? If this isn't the case, maybe an addon intrudes here or there is a problem with hardware acceleration...

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Does anyone know why I would double in pictures pictures that vary considerably in size? Who is the likely cause?

  Does anyone know why I would double in pictures pictures that vary considerably in size? Who is the likely cause?

  If you see this by snooping directly in the photo library file, are not!

  Photos is essentially a database program. The one and the only way to manage images in the library is via the interface of Photos, or you will corrupt the database.

  In addition to store the original files (if you do not ckoose to keep a local library optimized), pictures also maintains smaller, miniature to speed up the loading of the different images.

• I have a MacBook Pro late 2015, every time I have out of mode 'sleep' it is frozen and I turn it works.  Anyone know why this is happening?

  I have a MacBook Pro late 2015, every time I have out of mode 'sleep' it is frozen and I turn it works.  Anyone know why this is happening?

  Contact Apple for support and service

• Does anyone know why my iMac G5 osx10.5.8 suddenly developed continuous small networks of lines on the screen please? I can provide screenshots.

  Does anyone know why my iMac G5 osx10.5.8 suddenly developed continuous small networks of lines on the screen please?

  I tried to provide screenshots - insert an image does not accept.

  

  

  Just happened while the iMac was asleep.

  Thanks in advance

  Tony

  The image seems to reflect the possibility of problems of graphics processor.

  Some models had a history of failure or bad solder connections. others may

  have a combination of capacitors & other materials; Finally we have to fix.

  https://DuckDuckGo.com/?q=imac + 24 - anomalies graphics + 2008 + in +& t = ffsb

  One of the remedies for a graphics card problem, is a re - weld made by the

  users who have taken their card from the computer & their cooked in the kitchen oven.

  This idea has worked for some; You may be able to contact an authorized Apple

  Service provider or see if any of the parts suppliers in line can answer questions

  availability of replacement given to nine graphics cards, if you were

  can be removed from the logic board or if it is affixed, or welded to the card.

  An iFixit.com repair guide for your series of iMac (Intel-processor 2008) 24 inches

  can show that if that article can be virtually eliminated, if if will show process.

  https://www.iFixit.com/device/iMac_Intel_24%22

  The details of the computer in the bottom of your post isn't an iMac G5 model, and

  There is no powerPC G5 processor equipped Macs after late vintage

  2005 to early 2006; If the computer in the discussion is a G5 is not 24 inches

  and would be a model of Intel. They use a different architecture than G5

  powerPC even though in some respects are similar at least in the General design.

  This contains all guide ifixit for iMac G5 Power repair (there is no 24-inch model)

  https://www.iFixit.com/device/iMac_G5

  If you have an iMac with Intel processor and an older iMac PowerPC G5, specify.

  Don't know if a reset of the SMC or likely to alter the symptoms or change NVRAM

  the Visual problem on the screen; an underlying hardware problem is a likely cause.

  • Reset the management system (SCM) controller on your Mac - Apple Support

  • How to reset the NVRAM on your Mac - Apple Support

  If this is your model iMac (24 inch Early 2008) follows the model of generation identifier:

  Introduced April 2008

  Abandoned March 2009

  IMac8, 1 model identifier

  Model number A1225

  EMC 2211

  MB325LL/A order number

  First Prize $1 799 (2.8 GHz) $2 199 (3.06 GHz)

  You may be able to find the numbers of reference and research for replacement new or repaired

  old stock graphics cards. A friend had one of these models of iMac 24 inch 2008 and

  It failed due to a graphic processor; where she lived the BestBuy did not fix

  She even if it has been purchased by them with their extended warranty; No applecare.

  So, there are some out there in almost perfect condition, but not fixed, always.

  Do not know if the charges involved would be the value relative to the other

  later construction that can have no history of similar design construction. {Confirm the identity of the iMac.}

  Sorry I don't have any new ideas regarding this problem.

• Does anyone know why me projected in Logic Pro would be light pulses every now and then and would continue for what seems like an eternity?

  Does anyone know why me projected in Logic Pro would be light pulses every now and then and would continue for what seems like an eternity?

  The white flash indicates logic receives an order of what it can not do... Its like a visual error msg.

  I suspect a device connected to your Mac sends an error msg... or even your keyboard typing accidentally pressed causes the white flash error...

• I have the new apple TV, and he had the new user interface.  Friday he returned to the old version of apple TV user interface.  Anyone know why this could have happened

  This is a silly question, but I'm not too tech savvy.  I don't know I have changed something somewhere.  I have the new Apple TV, and he had the new user interface, which means that the appearance of the applications using the applications, example, scroll down to Netflix, Netflix, etc. to research.  This weekend he returned to the UI I've seen on my old Apple TV. Does anyone know why this could have happened and how I me the new interface to return?  I did a reset to the original values Apple TV and it did not work.  The tvOS is 9.1 (13U85).

  Try to understand the issue.

  Do you mean that you have an apple tv4, but he has a home screen display from the older ATV 2/3?  You can attach a screenshot?

  I have never heard of it and don't know how it is possible that they run entirely new software on the ATV4...

• I took my computer to factory, when I redownloaded itunes all my music was not there, anyone know why?

  I took my computer to factory, when I re-downloaded iTunes all my music was not there, anyone know why?

  Have you created a backup of your library and other value prior to the factory data reset?  Your music is stored on your hard drive and accessible via the iTunes database - you must maintain, or be able to restore to recover your full library.  However:

  • If you have your media files on your hard drive, but nothing appears in iTunes, tips to the user of turingtest2 on the empty/corrupted after upgrade/crash iTunes library can be relevant.
  • If you have media on an iPod/iPad/iPhone, you need to come back in iTunes, see recover your iTunes from your iPod or an iOS device.
  • You should be able to re - download the media you purchased from the iTunes Store - see download your past - purchases of Apple Support.
  • If you subscribe to Match iTunes, you can recover all or part of your library of cloud from Apple servers.

  It is, unfortunately, no 'magic' here... except if you specifically configure to do this (which may involve purchasing services add-on) iTunes relies on you to maintain the integrity of your library - an effective backup strategyagainst data loss (as for anything else on your computer that you cannot afford to give up to) is essential.

• does anyone know why my Security Center can't turn on the only show a message (windows Security Center cannot be started)

  does anyone know why my Security Center can't turn on showe just me a message (windows Security Center cannot be started) what can I do for this?

  If someone help me I thank a lot.

  Hi belizariocruz cruz,.

  ·         You receive an error with the message code?

  ·         What is the operating system installed on the computer?

  This problem may occur if the Security Center service is not configured to run under the Local Service account, but the dependent services are configured to run under the Local Service account.

  Note: The following can be used for Windows Vista and Windows 7.

  Method 1: To resolve this problem, make sure that the Security Center Service and all its dependencies are configured to run under the Local Service account. Set the center of security and its dependencies services to run under the Local Service account.

  a. Click Start, type services.msc and press to enter.

  b. double-click Security Center, click on tab log .

  c. Select "this account" click on the Browse button, type Local Service and click ok.

  d. type the password and confirm the password and click ok.

  Method 2: You can run the Microsoft Safety Scanner for any infection by virus. Check out the following link to do the same thing.

  Microsoft Safety Scanner - free online tool for PC health and safety

• I just bought a canon 6 d and I can not get my remote EXILE 430 flash. Anyone know why?

  I just bought a canon 6 d and I can not get my remote EXILE 430 flash. Anyone know why? Apparently my camera 'new' picture does not "see" the flash, must now the transmitter? Is there a Flash that work wirelessly with my canon 6 d?

  All remote flashes need a way to communicate with the camera.  They can be wired or wireless.  The wireless system can be optical or radio.

  The key is that there is nothing built in the 6 d to control a flash... If you need something to do this work.

  The 430EX II can be triggered via optical signal as a remote "slave" flash (430EX II cannot function as a mode of 'master' (aka 'Commander').)

  The method of Cannon to control the 430EX II is to use either:

  (a) a "Speedlite ST - E2 transmitter.

  (b) speedlite another able to work in "master" mode (and there's a long list... the 600EX / 600EX-RT, the 580EX II, and curiously the 90EX is actually able to perform a 'master').

  I recommend either the 600EX-RT (which would be the basis for additional units 600EX-RT in the future that would give you radio trigger) or find a 580EX II.  I probably spend on the 90EX and promote a ST - E2 if desired subject is a way to trigger the remote flash and don't actually want a flash.  The 90EX is not very powerful, so it is not particularly suitable as a stand-alone flash, unless you use it simply as a "fill" flash for close subjects.)

  There are also many 3rd party triggers, but the vast majority of them won't let you not use E - TTL (they would be "manual" only) and the units which support E - TTL will be too expensive to buy just a high flash range running as Commander.

• Anyone know why, when I try to open an image with camera raw in Bridge, it is said: "the camera raw editing is not enabled.

  Hi guys,.

  Anyone know why, when I try to open an image with camera raw in Bridge, it is said: the camera raw editing is not enabled. Camera raw edition requires a product calling has been launched at least once this feature.  What should I do?

  Thanks in advance :)

  original title: problems of camera raw

  Try the Adobe forums

  http://www.bing.com/search?q=Camera+raw+editing+requires+that+a+qualifying+product+has+been+launched+at+least+once+site%3Aadobe.com&qs=n&form=QBRE&pq=camera+raw+editing+requires+that+a+qualifying+product+has+been+launched+at+least+once+site%3Aadobe.com&sc=0-0&sp=-1&sk=

• I hear a hissing sound at startup on my pc that I never heard before, and I have windows vista, anyone know why? I continue to reboot my pc until it stops.

  Original title: whistle sound at the start of the pc

  I hear a hissing sound at startup on my pc that I never heard before, and I have windows vista, anyone know why? I continue to reboot my pc until it stops.

  Hi Cupcake3381,

  ·         Did you do changes on the computer before the show?

  I suggest you to check and clean the boot if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Let us know the results.