EN104 - Hub IP is on which Port does learn?

Similar Questions

• My usb port does not work. Device Manager says he has a "code 10".

  My dad recently bought a laptop on ebay. It's a HP Omnibook 900 with a 4 GB HD. The previous owner had improved from the original from Windows 98 to XP with SP3.

  It has a USB port in the back & it does not work!

  In fact it is not even appear in the Device Manager! I need to select 'Show hidden devices' to see same the USB hub root. The USB port has a yellow warning icon. In properties, it indicates the port is enabled but does not work because of a "Code 10".

  What the devil is a "code 10" & how in the heck to solve this problem, so that the USB works?

  The port is powered. When I connect devices usb load they turn on & load, but, of course, are not displayed on the computer. My best theory is that the port can be usb 1.0 but the software is intended for usb 2.0 and what could be the cause of the problem. That's just guessing on my part because I do not know with certainty if the usb is 1.0 or 2.0.

  It is especialy boring being the only external devices can I plug a CD player (unwritten) & a floppy drive. It would make my life much more pleasant if I could run software, backup & file transfer, etc. with a usb drive instead! It could even than the laptop quite useful to be worth the bucks thirties, my father paid for it!

  Help, please. Thank you.

  Hi SnarFoo,

  Method1

  The Code 10 error code is generated when Device Manager it has not enough information or error that has spread upward through the device drivers is not recognised by the Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  See the article and check if that helps.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  Method 2

  If the previous step fails, then remove and reinstall all USB controllers on the computer and check if that helps.

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.

  (b) click on the hardware tab.

  (c) click the Device Manager button.

  (d) expand Bus USB controllers.

  (e) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  (f) restart the computer and reinstall the USB controllers.

  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

• Satellite L650 - 12N USB Ports does not work

  My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
  It shows a yellow exclamation mark on my system.

  I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
  Under the key USB gives error code 43, I do not understand.

  The webcam and the wireless card no more.
  This boot problem after a storm in my area some time ago.

  Please can someone help.
  Thank you
  Sani

  Hello

  > This problem start after a storm in my area some time ago.

  Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

  I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

  But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

• Tecra A11 - serial port does not

  I have a Tecra A11 running windows 7 Professional (32-bit).
  My serial port does not seem to work as I am no longer able to connect to the industrial PLC automation which requires the connection to the serial port for programming.

  Some of the software I use is a RSLinx, Easysoft and others.

  Any help on this will be greatly appreciated.

  Hello

  The serial port is properly recognized in Device Manager?
  Do you have signs of yellow exclamation point there?

  Try to remove the serial port of the Device Manager and reboot the machine to get this recognized again port.

• After Windows Vista update, the usb port does not recognize the external hard drive

  My external hard drive still worked, but once I have updated Windows Vista USB Port do not see at all. Once I plug it into the laptop (HP Compaq) the port next to the port I plug the also work stoppages which is a usb mouse. Usually, when I have something plugged into the usb ports the laptop would also a sound signal which it does not.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• I get this message. It leads me to a page which certainly does not all missing photos.

  I get this message too. It leads me to a page which certainly does not all missing photos. There is no missing pictures throughout the project. What is happening in a number of strange bugs:

  • On a particular page, I drag a photo to share with others and he disappears and a third unrelated to photography appears in its place, which arrived with about four pictures, but not with others. Finally, I removed the odd pages and inserted brand new to work around him.
  • The pictures that I wanted to add that had disappeared and been replaced by others at random that I had to reproduce and add to the project because that drag / drop the original versions, they meet in the drawer of photos available at the bottom of the project.
  • Backgrounds not showing not chosen when in page view individual but reappear when I go back to the overview of the project

  I feel like there is something a little more complex going on that I narrowly missed an empty space. I have spent days and days on this project which is 64 pages long and do not want to lose my job!

  Can anyone help please?

  My pictures is the latest version - I have installed at El Capitan yesterday (in the hope of resolving the problem of missing funds). I'm on a Macbook Air 11 ''.

  This is a screenshot of the page, need me every time that the error dialog appears, any page, I was on when I clicked 'buy '.

  

  < post branched out by host >

  Since you have any other software you don't have the same problem (and if you get this message, you don't have a photo of the missing - you will find it will continue as posted)

  go through your book and check that no page has a gray background (it is an indication that a photograph is necessary for the bottom), that there are no missing pictures on the pages requiring a photo which are then covered with a photo and that all the pictures of a photo inside - yor have most certainly not a picture missing in your phpotobook

  and assistance in general, it is best to publish your own question in the correct forum - see written an effective communities of Apple Support question

  LN

• MacBook Pro 13 "Retina Display Usb Port does not... !!

  MacBook Pro 13 "Retina Display right usb port does not... I tried to plug in and out still it doesn't then I rebooted my macbook and again inserted the USB, it worked... !! Why this problem is caused? today is the 5th day since I bought my macbook... !! Also last night so he was working in final cut pro that freezes... the keys of my keyboard and trackpad it works do not totally got hung up... and then I pressed my power button after the restart, it was ok... Parachuting also does not work between my iphone and a macbook... say Bluetooth not connected to my phone eventhough after pairing... suggestions and advice? Help me please I am confused and worried... !! It's just the 5th day... !!

  Reset the SMC > reset the management system (SCM) controller on your Mac - Apple Support

• One of my usb ports does not work. A top forward on a MacPro 3.1

  So I plugged it in a charger to charge a battery. He went for about 1/2 hour then I got a message a lot of power, port and it will stop the port. Something like that. So now the port does not at all with any device. Can this be reset?

  Running OS 10.6.8 snow leopard. 3.1 MacPro Tower.

  Try a reset of the MSC...

  MacIntel: Reset of the controller (SMC) system management

• NB200-12N - USB port does not work

  Hello

  I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
  Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
  But does not work.

  Thank you

  Paulo

  If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.

  Try reinstalling the chipset utility.

  By the way: two other ports work well, right?

• Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

  I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

  Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
  The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

  Plug the mouse on or off doesn't change anything. Only restart helps.

  Any ideas?

  It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

• S-Video port does not work on Tecra M5

  Hello. S-Video on my laptop M5 port does not work. I checked everything Svideo cable, TV and also the drivers. Everything works fine. Could you advise me please? How can BTW, I check the Svideo port?

  Hello

  There is not much to do
  (1) Please make sure you use a S-video S-video cable and connect it to the TV
  (2) turn on the S-video TV port - VERY IMPORTANT
  (3) use the FN + F5 key combination to switch to TV

  All that s!

• HP 15-AF006AX: USB 2.0 port does not work

  Hello

  I installed window 7 in my new laptop, but the usb port does not work in the case of data transfer.

  and I am not finding a driver for this, can you help me for this problem

  Thanks in advance

  Hello:

  The only suggestion I can offer would be to settle the AMD Chipset drivers from the link below the problem.

  You want the first file on the Web page.  Install and reboot the PC.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

• Pavilion v042tx: is - anyone know which port of the screen if I want to change my LCD?

  I want to change my LCD v042tx because it has a pixel dead for a long time, but I don't know which port it is. can you tell me how much is it?

  Hello

  What do you mean "how many port? The following link shows its specifications:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c04337673

  He uses: 14 "diagonal screen HD BrightView - backlight WLED (1366 x 768), part number is 763566-001 as shown:

  http://PartSurfer.HP.com/search.aspx?SearchText=J3Z76PA

  You can buy in the store above or use elsewhere part number search.

  Kind regards.

• El Capitan USB port does not worked well under Yosemite.

  Running a VMWARE image of the Linux kernel using a Sentinel of SafeNet USB license dongle canned.
  Has worked perfectly under Yosemite unfortunately too long to go back.

  The USB port does not work with other USB devices?

  I suspect an incompatibility with the EC and the sine of dongle USB EL strengthened using third kexts. They must be signed, and so a softer update for the dongle is probably necessary.

  http://arstechnica.co.UK/Apple/2015/09/OS-x-10-11-El-Capitan-the-Ars-Technica-re view/8 / #h1

• USB key into the USB port does not appear in 'my computer '.

  Original title:-drive Flash USB port does not appear

  I have laptop Dell A 4 years and cannot use USB ports. My data flash drive lights flash but nothing shows up in 'MY Computer'

  It turns out that there is a problem connecting to the motherboard... so it ' s not worth repair. However, I believe that I can connect to the Internet by the yellow cable supplied with the router. There is also a card I can buy known as PCMIA card that will give me 2 additional USB ports. It's cheap enough to give it a try.
  Once more a big thank you to all those who have offered their advice on this matter. I'm amazed that so many people are willing to give of their time to help a novice

  Terry