My last update failed 99% and now my laptop does not start?

Similar Questions

• Upgrading RAM and now computer laptop does not start for Windows 7

  Hi all

  I'm working on laptop HP Pavillion G7-1070us of my father, and I'm having a problem starting after the installation of 8 GB of RAM.  I upurchased 2 sticks of 4 GB of DDR3 PC10600 UN buffered, NON ECC RAM of Frys and everytime I go to start the laptop it throws an error that can not load Windows and offers to run the repair or start normally... little matter that you select, it goes back in the loop of what prompts to repair or load... The BIOS recognizes all the 8 gb... have you tried 2 different sets of different manufacturers (Patriot and Crucial). As soon as I pop 2 2 GB sticks in it boots fine... I even tried to start the the Windows 7 DVD to repair windows, but he always comes back in the loop... I tried the two current and previous BIOS without success... Help, please

  Hello

  Sorry, I've updated the link:

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/Pavilion+G7/Pavilion+G7-1070us-upgrades.html

  Kind regards.

• I need help. I updated Adobe cc and now my photoshop does not work. Here is the error message:

  ' I need help. I updated Adobe cc and now my photoshop does not work. Here is the error message:

  
  

  Problem event name: APPCRASH

  Application name: Photoshop.exe

  Application version: 16.0.0.88

  Application timestamp: 55681d 39

  The default module name: StackHash_76b2

  The default module version: 0.0.0.0

  The default module timestamp: 00000000

  Exception code: c0000005

  Exception offset: 0000000000000006

  The system version: 6.1.7601.2.1.0.768.3

  Locale identifier: 3084

  Information extra No. 1: 76 b 2

  Information extra No. 2: 76b2e5a7b24373bbe6f47563f13e47b1

  Information extra No. 3: 51ff

  Information extra No. 4: 51ff68a42cf4d2164e10e22e1f794f34

  
  

  Hi Oscar,.

  Please see the thread below:

  Photoshop CC 2015 crashing?

  You can also check: 2015 release of Photoshop CC: FAQ

  Kind regards

  Sheena

• I recently got an automatic update of Windows and now my iTunes does not... and neither is NO sound at all. Help, please!

  Windows automatic updates from time to time, and since the last of them, not only my iTunes plays not anything... my sound on my computer does not work for anything.  I can't watch any videos/tv shows/listening to music... NOTHING.  Help, please

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  Uninstall software, remove programs and solve uninstalling problems
  http://www.revouninstaller.com/

  ITunes download (32-bit):
  http://www.Apple.com/iTunes/download/

  Download 64 - bit:
  http://support.Apple.com/kb/DL1037

  If your computer has problems play a sound, try using the Audio playback problems resolution to solve the problem. For measures and additional information, see o ink below.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  You have a fluorescent lamp next to your computer which could be emitting a rf? This could interfere with the microphone.

  In Windows 7

  Click Start > Control Panel

  Click on hardware and sound

  Under sound, click on manage audio devices

  Under playback (tab)

  Choose speakers you have in your output device

  Click Properties >

  Click levels (tab)

  check if the value is 100% >

  GoTo Enhancments > select Loudness balancing

  Apply and OK

  Should be much stronger now...

  For enhancment bit,.

  and if you have HD realtek soundmanager (R2.37) in your control panel

  Try a classic Equalizer setting

• Pavilion 15-ab118na: I just did an update and now my laptop does not recognize my PIN code

  I just did an update on my laptop and now when I try to connect it does not recognize my pin code. Don't know if it's Windows 10 32 or 64-bit.

  Hi @Allic43,

  Welcome to the HP Forum! Thank you for becoming a member of the HP Forum. It's a place dynamite to get help from the community, to get suggestions and find what has worked for others. Because you have the best experience, here is a link for you to see, if you have concerns: first time here? Learn how to publish and more

  I have the bar who after doing an update your PIN code is not accepted and you don't know if your Windows is 32 or 64 bit. When I checked the specification of your laptop, it came with 10 Windows 64-bit edition. You can use your Microsoft account to reset the password on your laptop. Here is a link to help you in this process. Computers HP - how to recover your forgotten password (Windows 10).

  Please let me know if that solves the problem by marking this post as 'Accept as Solution'. "To simply say thank you, click on the" ","inch Up ' below!   If you need more assistance let me know and I will gladly do everything I can to help.

• BlackBerry Z10 updated the phone and now remove contact does not work

  Hi all

  I just rec'd blackberryz10 and I did an update yesterday. I now have a problem I did not before. First, he reproduced several of my contacts in the contacts in the folder, so now I have 3 or more of the same person. I didn't know this before. Also, when I try to delete additional contacts, it will not erase!

  Any HELP or ADVICE would be greatly appreciated.

  L

  Hey lquon,

  Welcome to the community of BlackBerry Support Forums.

  Thanks for the question.

  In Contacts, drag the top and choose settings. Once in the settings, how many accounts is enabled?  If there are several service accounts, change all except your e-mail account and then let me know if the duplicates appear always.

  I look forward to your reply.

  See you soon.

• surge in the House and now the pc does not start

  Despite beinbg plugged into a surge protector, it seems as if the power went out while I was away from home and this caused a wave (a conclusion). I guess it was a wave because now my HP 7250n media center pc will not start. Do not nothing fans. Just completely dead.

  What did I try? The light on the back of the computer remains turned on, so I followed the steps I have read on HP forum as an advisor help what to what power is out and the light stays on (as opposed to Flash, which it is not). I held the power button down while the system was disconnected. No power. I then tried to move the tension and then again, although the system was disconnected. It did not return the power. I opened the side panel and confirmed that the sons were running to the motherboard and have been connected correctly.

  Of course, I tried the machine on several different points of sale, and it is not a function of a defective surge protector or the decision-making.

  I have read one or two related forums which involved a debate between whether a PSU or of the motherboard problem. But I am pretty illiterate about these issues and don't know how to test or change a PSU. And the motherboard, I won't try to play with that. One of the messages, said if the light remained on was probably the case that the power supply was still OK, but this did not mean he would be able to power your computer (and did not say what to do if the light remains on, but rather continued to discuss what to do if the light flashes... that's not my situation). I guess I'm willing to try things if anyone has any suggestions, but I did the basic things that are offered at the beginning already. Are there next steps that someone can suggest?

  Thank you.

  Gordon, here is the information on the Belkin surge protector that I use:

  Model: BE112234-10
  Belkin 12-Outlet Surge coaxial Protection

  There are 3960 joules (prn. jewellery) of surge protection.  I don't understand the terminology entirely, but my son is an electrician and specialist in security system (low voltage) and he said it's a lot.  At least, for our part of the country.  It has also 12 points of sale with several outlets for small transformers that lift so much space.

  Replace a power supply is not so difficult.  The key is to watch where the wires are connected when you delete them.  You can take a photo before you start.  This will give you an idea of the area where they are going.  Most of the news of the PSU have the wires marked clearly as to where they connect.  The motherboard connectors are also marked clearly.  The hardest part is to get all the cables that are placed so that they don't block air to one of the components.  Need me normally up to an hour to do it correctly.  Sometimes, you need to get inventive with bigger cables.

  If you need assistance with the project, let us know.

  Message edited by old_geekster on 06/10/2009 16:46

• Apple Support communities / software Windows / Boot Camp upgraded to El Capitan and now Bootcamp windows does not start

  First of all, thanks for all the help I get.  I upgraded a couple of days to ELC.  After that, the boatman partition disappeared.   I managed to get bootcamp to be visible again in the Finder with a reconstruction of my GPT4.  But when I try to rebuild my MBR, I see only 3 partitions and non of them are the bootcamp partition.  Here are the results of the different queries can help the expert here what I'm doing wrong.

  My mac is a 2010 MBA.

  sudo fdisk/dev/rdisk0

  Password:

  Disk: geometry / dev/rdisk0: 14751/255/63 [236978176 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 0 0 2 - 25 127 14 [1-409639]

  2: AF 1023 254 63 - 1023 254 63 [409640-174512312] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [174921952-1269536]

  04:00 0 0 0-0 0 0 [0-0] unused

  Sabri-MacBook: ~ bb_504$ sudo TPG - r - vv show/dev/rdisk0

  See the TPG: / dev/rdisk0: mediasize = 121332826112; SectorSize = 512; blocks = 236978176

  See the TPG: / dev/rdisk0: MBR suspicious to sector 0

  See the TPG: / dev/rdisk0: Pri GPT to sector 1

  See the TPG: / dev/rdisk0: GPT Sec at sector 236978175

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 174512312 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  174921952 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  176191488 60786655 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  236978143 32 table dry GPT

  236978175 1 dry GPT header

  sudo gdisk/dev/rdisk0

  Password:

  GPT fdisk (gdisk) version 1.0.1

  WARNING: Open with shared lock devices will not have their

  table partition automatically reloaded!

  Scanning partition table:

  MBR: hybrid

  BSD: absent

  APM: absent

  TPG: present

  Found a valid GPT with hybrid MBR; using GPT.

  Command (? for help): P

  Disk/dev/rdisk0: 236978176 sectors, GiB 113.0

  Logical sector size: 512 bytes

  Identifier (GUID) of disc: 00005B53-75AE-0000-2978-0000C1210000

  Partition table contains up to 128 entries

  First usable sector is 34, last usable area is 236978142

  The partitions will be aligned with the boundaries of sector 8

  Space free total is 6 sectors (3.0 KiB)

  Starting number (sector) end (sector), Code name of size

  409639 40 1 200.0 MiB EF00 EFI system partition

  2 409640 174921951 83.2 giB customer AF00

  3 174921952 176191487 619.9 MiB AB00 Recovery HD

  4 176191488 236978142 Microsoft giB 0700 29,0 base data

  Command (? for help): R

  Recovery/processing command (? for help): O

  Size of the disk is 236978176 sectors (113.0 GiB)

  MBR disk identifier: 0x0000121F

  MBR partitions:

  Code of State sector Boot start end sector number

  1 1 409639 primary 0xEE

  2 409640 174921951 primary 0xAF

  3 174921952 176191487 primary 0xAB

  1 Please after the release of

  sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

  2. using the 'o' command 'r' menu shows you the current MBR (that matches your output of Fdisk). Two of them contain 3 entries. When you use the command 'h' and provide the list of partitions to Gdisk, it will build a new MBR to match your GPT based on what you provide in the partition list.  Please see No Bootable Device Error - early 2014 Macbook Air for example.

• a "OxcOOOOOOf" appearded message and now my pc do not start.

  ORIGINAL TITLE: help for recovery,

  Hello. I'M ORIGINALLY FROM GREECE, SPARTA AND MY ENGLISH IS NOT VERY GOOD. I'LL TRY TO DO A QUESTION. I HAVE WINDOWS VISTA ON MY COMPUTER AND I WANTED TO UPDATE FRON IE8 IE9 SO I STARTED. BUT A MESSAGE TOLD ME THAT FIRST I UPDATE MY WINDOWS TO UPDATE MY IE. SO I STARTED RUNNING THE GAME TO UPDATE MY WINDOWS. WHEN IT FINISHED DOWNLOADING IT ASKED TO REBOOT IN ORDER TO SAVE THE NEW SET UP! AFTER THE REBOOT, A BLACK SCREEN APPEARED AND STARTED LOADIN BUT IT STACKED AND MADE SUPRERB FOR A LONG TIME! A "OxcOOOOOOf" appearded MESSAGE and now my pc DOES NOT START AT ALL. WHAT CAN I DO? IF I LOAD MY WINDOWS VISTA RECOVERY MEDIA CD I LOSE POWER I HAVE ON MY COMPUTER (PHOTOS, SONGS, FILES, EVERYTHING?) I TRIED BUT IT DIDN'T ASK ME TO DO FIX IT, SO I WAS AFRAID TO NOT LOSE EVERYTHING, AND I STOPPED! PLEASE HELP ME. ME WHAT TO DO BECAUSE I NEED MY PC FOR MY WORK! THANK YOU VERY MUCH AND I WANTED YOU SAY THAT I AM GREEK-AMERICAN! ,

  THANK YOU MUCH FOR YOUR TIME! I DIDN'T WANT TO WAIT SO I TRIED TO RELOAD THE WINDOWS VISTA MY CD BEFORE YOUR ANSWER.IT DIDN'T GIVE A CHOICE OF LANGUAGE SELECTION, TIME AND CURRENCY.IT ASKED ME THE PRODUCT KEY AND THEN BEGAN TO LOAD! AFTER A LONG TIME HE RESTARTED THE PC AND ALL WAS LOST. EVERYTHING! BUT I HOPE THAT A FRIEND TOLD ME TO LOOK AT THE DISK TO SEE IF THERE IS A FILE NAMED OLD WINDOWS AND EVERYTHING WAS IN THERE! OF COURSE I HAD TO RELOAD THE DRIVERS AGAIN AND SO I DID! AND NOW MY COMPUTER WORKS VERY WELL! BUT ANOTHER LITTLE PROBLEM I HAVE NOW IS THAT I CAN NOT PLAY MUSIC WITH NERO OR WMP OR NESTED PROGRAM, BUT ONLY WITH REAL PLAYER! I USE IT TO DOWNLOAD MUSIC WITH IE DOWNLOADHELPER, BUT THEN I CAN'T PLAY THE SONGS! I CHECKED THE DEVICE MANAGER AND THE AYDIO WORK FINE! WHAT CAN I DO NOW? THANK YOU VERY MUCH AND I'HAPPY YOU CAN UNDERSTAND MY ENGLISH!

• Update Mac OS, now VMWare Fusion does not start

  I upgraded to Mac OS 10.4.11 on Intel MacBook Pro and now VMWare Fusion does not start.  I've since installed, uninstalled, and reinstalled to Fusion 2.0.2.  That did not help

  I have attached the logs from VMWare. Any suggestions?

  John

  Hi John,.

  I checked your logs - thank you for them!  That you use in an accident in one of the Apple libraries (OpenSSL, to be precise), which uses VMware Fusion.

  I see a number of Mac OS X 10.4.11 users complain about the accident even in iTunes:

  http://discussions.Apple.com/thread.jspa?MessageID=8254606

  http://forums.Macworld.com/thread/105826

  They claim that the installation of the latest Apple security updates (they specifically mention 2008-007) solves the problem.

  Can you try to install the latest security updates, and let us know if this fixes the bug Apple?

  Thank you!

  Ben

• I received an update on your part 10/11/10 and now my laptop will not boot in place! I need HELP.

  I received an update on your part 10/11/10 and now my laptop will not boot in place!  I need help.

  Hi bobbymh,

  -Do you happen to remember the update has been installed?

  -You receive an error message when you try to start the computer?

  Follow the steps below:

  Method 1:

   

  Try to start the computer using the last good known Configuration and check if you can successfully start.

   

  For instructions, see How to start your computer by using last good Configuration known as Windows XP .

  Method 2:

  Perform the system restore from SafeMode to a restore point prior to the show and check if this solves the problem.

  See to run the system in safe mode restore

  See also How to restore Windows XP to a previous state

  Method 3:

   

  Follow the steps listed in the following article:

  How to fix a computer that does not start

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I've updated windows and now my computer does not connect to the wireless network.

  I've updated windows security updates and now my computer does not connect to the wireless network.  Until then, it worked very well and even now it will connect through wired connection but not wireless.

  Hello
   
  You can follow below link that can help you to solve your problem:
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

• I got a notification of update for adobe CC but it does not work and now the Office does not

  I got a notification of update for adobe CC but it does not work and now the Office does not

  I actually just finished with support on a cat and it was corrected. Thank you.

• I upgraded Qualcom Ateros and now my wifi does not work.

  Original title;

  I upgraded Qualcom Ateros and now my wifi does not work. How is it?

  I've just updated and now my wifi does not work. I trust Microsoft updates... But this time I shouldn't trust...

  Hello

  1. what operating system is installed on the computer?

  2. How is that you have updated drivers for QUALCOMM Ateros?

  3. what exactly happens when the problem occurs? You receive an error message?

  If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. Check out the following link.

  Restore a driver with its previous version

  http://Windows.Microsoft.com/en-us/Windows7/restore-a-driver-to-its-previous-version

  Also check out the following link:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if it helps!

• Downloaded Firefox 38.0.1 and now edit/search does not work.

  The Question above about nearly everything.

  I downloaded Firefox 38.0.1 (I'll never learn) and now edit/search does not work. The search at the bottom of my screen bar disappeared and clicking on EDIT and SEARCH does nothing. Also, Ctl - F does nothing.

  FYI, using Windows 8.1.

  Someone actually check the compatibility with desktop computers and laptops on the news, or is it more important to be compatible with smart phones?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Try to rename (or delete) the file xulstore.json in the Firefox profile folder.

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox