My Lightroom is damaged and does not start

Similar Questions

• Satellite A300D (PSAKCE) - BIOS is damaged and does not start

  I formatted computer after when I put update computer BIOS is frozen and it does not work now. File is true where I download from Toshiba Web site.
  I searched Web of Toshiba sites there was not any producere for recovery of the BIOS for the damged BIOS file. Many start-up models with some keys to the BIOS update but mine is not starting any screen only empty key.

  -Can I do it myself? Is there a procedure for Satellite A300D-17F (psakce)? I don't want to wait for the rear service it 6 months before I bought it.
  -If I send to the service, it is under warranty? I don't know any time service can be a problem. They say problem user but I reformatted the PC after I started the update program and they can not understant that sometimes.

  Thank you...

  Hello!

  In this case, you need help from the ASP. You can do anything and it is possible that the ASP BIOS reset.

  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• Error: AVG file is damaged and can not start when tried to start the AVG program

  Original title: Virus of internet surfing

  Surf the Internet today and had a pop up window that says that my PC has a virus and must by a specific virus program to remove. Then, I can't go on the internet or open my AVG program because I get a pop - uo, which says that the AVG file is damaged and cannot be started. Any ideas how to remove it? Tried system restore, but does not open.

  Hi gary125,

  1. don't you get an error message when you connect using Internet Explorer?

  If you get "Internet Explorer cannot display the webpage" then run Microsoft struggling to diagnose the problem. Download the hotfix to a USB drive on another computer and run it on the computer of the problem.
  See you receive an error message in Internet Explorer: "Internet Explorer cannot display the webpage"

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My laptop fell and does not start

  Hello! My compaq presario cq56 bowed down and now won't start. I opened it and checked everything. Hars battery, memory disks. I have replaced everything but nothing. I checked the mem, battery and the drive on my second laptop and it worked. When I connect to the AC, the indicator light is on, but when I push the power button, it does NOTHING. What should I check?

  Unfortunately, it will have to be disassembled and inspected if it is does not start due to a fight with gravity.

  Warranty does not cover damage inducer owner, even if inadvertently.

  You could try to remove the hard drive and then see if the laptop responds to the power button. If the motherboard is OK, the BIOS must meet in showing an error message that says it found no bootable disk (or operating system) found. A fall can make a hard drive unusable.

• iPhone hot 5s fees and does not start

  phone is connected to the load.  After a while I checked it and it was very hot.  I unplugged it and now it does not start.

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data.

  More troubleshooting can be found in this article:

  If your iPhone, iPad, doesn't respond or won't turn on - Apple Support

• 6735 b hangs and does not start on battery

  My 6735 b does not start on battery. Just hangs until I plug in the power supply. For some odd reason, I can't access the drivers even though I have the laptop regestered? Can someone post a link to the update of the bios for me?

  Glenn,

  The server is maybe out of service.  I reported the problem with the web page.  Yours is not the only page not available at the moment - something's up.

  Hang in there and try again later.

  Just for the record, in the case where it is useful:

  Test and calibrate the battery (Windows 8)

  Test and calibrate the battery (Windows 7)

• Get beeps when the computer starts and does not start

  Original title: Hello I have Mo Intel DG31PR & 2 GB Transcend RAM while the switch on it give beep 4 times and you would be in this case for several attempts does not start and it begins so please help and what is the problem?

  Nothing more to say

  Pravin Dave

  Hello PravinDave,

  If we get the beep codes and the machine will not move past, then we have hardware problems.

  You will need to contact your hardware manufacturer for more information on the beep codes and their meaning.

  Best regards

  Matthew_Ha

• NB just by making the effort test and does not start backup

  HP dv7-4177 started having types, wouldn't restart. I tried to test that are inbeded and when I did the stress test he stops and does not restart. I hit the power button and nothing happens. I took the hours of battery sevealr and handed over in but I have nothing seems to help.

  Hello Nutn Spec.  I understand that your notebook is currently unable to boot.

  What kind of questions you know before performing the stress test?  This will help me identify the cause of the problem.

  Have you tried to do a hard reset?  It drains all the residual energy of the laptop and hardware reset forces.  If you haven't tried this before I would suggest trying the following.

  1. Make sure that the laptop is completely turned off.
  2. Remove the battery and AC power.
  3. Press and hold the power button for 15-20 seconds, three times.
  4. Replace the battery and AC power.
  5. Try to start Notepad.

  Let me know the result.  I will keep an eye out for your answer.  Have a great night!

• When I started my computer this morning, it ran chkdsk at startup, windows startup it goes immediately to chkdsk, it will be repeated again and again. I can boot into safe mode, but if I try to start windows normally it runs chkdsk and does not start

  Windows does not start normally, just run chkdsk again and again

  First test the hard drive to make sure it's healthy. Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  If the hard drive then passes the physical tests, safe mode:
  Start > run > cmd [Enter]
  fsutil dirty query c: (or the appropriate drive letter) [Enter]

  This will tell you if the disc is dirty or not. Then always in cmd:

  chkntfs /x c: (or the appropriate drive letter) [Enter]

  This tells Windows not not to check this drive at startup. Reboot and it should go on the desktop. Once Windows loaded, run cmd and:

  Chkdsk /f /r c: (or the appropriate drive letter) [Enter]

  CHKDSK will run through all 5 steps. After that it's over, always in cmd:

  fsutil dirty query c: (or the appropriate drive letter) [Enter]

  to see that the dirty bit is not set on this drive.
  MS - MVP - Elephant Boy computers - don't panic!

• Lightroom 5.5 CC does not start after update

  Hello

  I used the creative cloud to download all new 2014 updates LR 5 was an update.  All downloads and installations reported successfully.  I opened PS CC 2014 and he launched and loaded correctly.  However, LR 5 launches the screen flash for about 2 seconds, but does not start.  I try to go to Cloud creative to download and reinstall, but LR 5 as it is installed and won't let me not re - download and install.  I also tried to pass on the new adobe creative cloud site and tried to download it, but it is comes up with a message that the link requires a launch program... have no idea what happened to the program.  Totally baffled with this new cloud set up!  Your help is greatly appreciated.

  Dennis

  I have the subscription of photography - both LR and Psalm

  I contacted just supported and the mast has been resolved. Here's what we did:

  Remove the LR5 of the Applications (Macbook Pro) folder application

  Download and install the new LR5.5 software via the web on adobe.com

  Start LR (it worked)

  Sign out of Adobe CC app

  Connect to Adobe CC app and he finds LR and scored is installed.

• I installed jZip, it crashed Firefox and does not start again; How can I get Firefox to work once again, preferably without uninstalling?

  I installed jZip and it crashed Firefox, I tried to restart Firefox, but it wouldn't. I uninstalled jZip, Firefox didn't work; I restarted the computer and it still does not work. I can't use even run Windows to pull up the profiles. Is there something I can do to get Firefox to work again without reinstalling? I really like to use the session restore but its so erased its uninstalled.

  Yes to aid,

  Start > Search > firefox.exe /ProfileManager {ENTER}

  I got to the profiles.

  I'm fed up and uninstalled Firefox, when he asked if I wanted to erase all data associated with Firefox I did not and when I reinstalled it straight last session here, I assume that this sort of program file has been damaged and has stopped working. Put it back, fixed everything that was wrong.

• Cannot install Windows XP because my disc is damaged and does not load.

  Try to reinstall Windows XP disc I have. Don't work so can't get computer to start

  I tried to reinstall Windows XP Service Pack 2 on my mom's computer.  I deleted the files with the help of brother-in-law, who said he had the drive. I did not know the security number the disk has been corrupted. Have since found the drive to MOM. Don't read that so can't get on computer. Trying to put it again so that she is away... will be back Saturday Panicking!

  Setup cannot find a previous version of windows installed on your computer.  To continue, Setup must verify that you qualify to use this upgrade product. Please insert the product windows CD is in the CD rom drive, and then press ENTER.  I have inserted a microsoft windows xp professional service pack 2, then this message: Setup could not read the CD you inserted, or the CD is not a CD of windows vald.

  Hello Sarah-JaneBenjamin
  The disk that you want to install Windows with is an upgrade. You need a complete product if you want to use the upgrade disk to install the operating system. That's why it asks you to verify that you have a calling to upgrade product. You said that you inserted a disc of Microsoft Windows XP Professional for validation, it's the same disc supplied your brother-in-law? You have already determined that the disc is damaged, so it does not work. Have you checked that the drive that you want to use is a complete operating system and not just a service pack disc? Also if you use the upgrade disk is not the equivalent of the disk that you use to check then the validation will fail also. If I had to guess I would say that you are using a service pack disk and that's why he will not be validated.
  In all cases, you must always a valid disc to re - install Windows. I suggest that you contact Packard Bell support and see if they can provide you with the media. The chances are slim that they will have it since it's Windows XP. If they don't you may want to check with 3 sites of third party for the purchase of Windows XP. Trying to divert from auction sites like most XP Media is questionable in their legitimacy.

• Lightroom 5.7.1 does not start after a broken import

  Hello

  My computer crashed during an import and restarted Windows (7). Now, I can't start LR because I get an error message that says "Lightroom has detected an error during playback of a snippet-cache and will end Lightroom will try to fix the problem at the next startup upward. There is only an ok button and then LR ends but does not correct the error. What should I do?

  Hi Anderst,

  Please refer to the solution to this thread lightroom has encountered an error during playback of its cache of the preview and follow the steps.

  Let us know if that helps.

  Kind regards

  Assani

• My iMac is flashing at me and does not start!

  I turn on the iMac and it starts to load but gets half way then flashes to black screen and stops to load and crashes with a router? as if taken between the opening and closing? Picture attached

  Probably a failed HD Try booting into the recovery (command-R) to the boot partition. Open utility disk - First aid, then run First aid on the hard drive. If this does not work, then take the local computer to your Apple Store or the authorized Apple service provider to be repaired.

• MacBook Pro glued on the gray screen and does not start. Help, please!

  Hello

  My 13 "MacBook Pro (mid-2009), running Snow leopard (10.6.8), has finally given up and won't start.

  I tried to boot into SafeMode several times, but the loading bar does not move and the laptop just completely stops.

  I also tried to boot in single user mode with the command fsck - fy, but this results in the following:

  disk 0 s 2: I / 0 error

  Invalid node structure

  (4,35296)

  * The Macintosh HD volume could not be completely checked.

  / dev/rdiskOs2 (hfs)

  You leave with signal 8

  I guess that means that there is something wrong with the hard disk and some corrupt files?

  My problem is that I have no time machine backups, so I would like to know if it is possible to do something to get to the top and running.

  That, I do not have an external drive with my main important files and photos on a failure, so is it possible to completely erase the computer so I can sell it at least?

  I really need help on what I've been driving myself crazy trying to figure it out!

  I'm not all techniques with regard to the material. I tried doing research and have seen things, which suggests that I should reinstall the OS X, this would imply in the disks provided with the laptop when the power?

  Any advice greatly appreciated!

  Boot from the DVD and run the check/repair disk utility and repair permissions until you get no errors.  Reformat the hard disk using Disk Utility/Erase Mac OS extended (journaled), then click on the Option button and select GUID. Then re-install the operating system.

  When you restart, use Setup Wizard to restore your data.