My macbook pro win8 bootcamped i7-3840QM 2013 Geforce 650 M GT 700 GB SSD - runs very slowly photoshop cs6.

If I try to transform a simple 800px 500px image, his response is very slow. Device Manager displays all the problems with the hardware. I have all the latest nVidia drivers. Any ideas?

Thanks for any reply - fortunately assani helped me in the chat.

We are troubleshooting-made it and found that if I turned it off graphical processor Perfomance that I would get much better performance - so I reached out to nVidia and we find the right driver - apparently the last (347.09) driver from nVidia is the source of the problems.  The pilot work for me was 340.52.  Now, everything's fine.

Tags: Photoshop

Similar Questions

  • Taken SSD Intel SSD 540 s M.2 supported by the MacBook Pro 13 "retina end? 2013 (11,1)

    You have all the information if the new series of SSD INTEL 540 s 1 TB m2 will work with a MacBook Pro 13 "retina end? 2013 (11,1)

    Intel said it does not support NVMe. Should or would add just performance gain?

    I discovered by the research so far it is not supported. According to the information that I had any player should of NVMe or OS X will not accept or even boot from it.

    If someone have different information or the best life experience - I'd be happy to hear...

  • MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on ex

    MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on external hard drives). Thanks for your suggestions.

    You will not lose anything, but the app if you uninstall. If you decide to uninstall use this app to make sure that all the other files which depends on FCE are also deleted however I can't give you any assurance as to whether you will be able to reinstall so that it works correctly. It is a software that has not been supported for almost 5 years and there are conflicting reports as to its compatibility with OS X 10.11. Can't I test it myself.

    Maybe someone else will chime in with their own experiences.

    Russ

  • When I open my application on my Macbook pro using bootcamp, the photoshop CS3 opens very low.  How can I solve this problem?

    When I open my application on my Macbook pro using bootcamp, the photoshop CS3 opens very low.  How can I solve this problem?

    Legacy versions do not support the higher resolutions / poster of the retina. Refer to this:

    My UI elements appear tiny. | Error postal codes of Mylenium

    Mylenium

  • MacBook pro with bootcamp (pour windows and osx on mac of LUNS)

    Hello

    I have a macbook pro with bootcamp (pour windows and osx on mac LUN) must I purchase two licenses?

    Thanks for your reply.

    Xavier

    Hi,

    Adobe CC license can be activated on 2 machines using the same Adobe ID, but can be used only 1 at a time.

    Reference: licenses and terms of use | Adobe

    Kind regards

    Sheena

  • MacBook Pro (3-inches, mid-2012) suddenly started running very slowly; Beach balls very common

    About a week and a half, it started running very slowly with the spinning beach balls popping up all the time.  This reminds me of how when I have too many tabs of the browser as in the past, but now, even with browsers had closed, open Word or Skype is really slow.  (I'm sorry for any confusing formulation; I'm not very computer customer connected, unfortunately!)

    Some of the things I've tried so far and EtreCheck below):

    -safe mode

    -detection of hardware problems (control + D)

    -reset the PRAM

    -using the utility disc for repair/first care; also check

    -wipe the hard drive and reinstalling original OS X Lion (was still slow with beach balls; I tried to install OS X El Capitan to see if that would help, but installation could not finish)

    -wipe the hard drive and restarting from a backup previous (one month before the problems started)

    EtreCheck version: 3.0.3 (307)

    Report generated 2016-09-11 17:51:16

    Download https://etrecheck.com EtreCheck

    Duration 34: 39

    Performance: poor

    Click the [Support] links to help with non-Apple products.

    Click the [details] links for more information on this line.

    Problem: Beachballing

    Description:

    also very slow in general

    Hardware information: ⓘ

    MacBook Pro (13-inch, mid-2012)

    [Technical details] - [User Guide] - [warranty & Service]

    MacBook Pro - model: MacBookPro9, 2

    1 2.5 GHz Intel Core i5 CPU: 2 strands

    4 GB of RAM expandable - [Instructions]

    BANK 0/DIMM0

    OK 2 GB DDR3 1600 MHz

    BANK 1/DIMM0

    OK 2 GB DDR3 1600 MHz

    Bluetooth: Good - transfer/Airdrop2 taken in charge

    Wireless: en1: 802.11 a/b/g/n

    Battery: Health = Normal - Cycle count = 1054

    Video information: ⓘ

    Graphics Intel HD 4000

    Color LCD 1280 x 800

    System software: ⓘ

    OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour

    Disk information: ⓘ

    TOSHIBA MK5065GSXF disk0: (500,11 GB) (rotation)

    EFI (disk0s1) < not mounted >: 210 MB

    Macintosh HD (disk0s2) /: 499,25 go-go (349,39 free)

    Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

    HL-DT-ST DVD - RW GS31N)

    USB information: ⓘ

    Apple Inc. Apple keyboard / Trackpad

    Computer, Inc. Apple IR receiver.

    Apple Inc. BRCM20702 hub.

    Apple Inc. Bluetooth USB host controller.

    Apple Inc. FaceTime HD camera (built-in)

    Information crush: ⓘ

    Apple Inc. Thunderbolt_bus.

    Goalkeeper: ⓘ

    Mac App Store and identified developers

    Launch system officers: ⓘ

    [loaded] 6 tasks Apple

    [loading] 164 tasks Apple

    [operation] 68 tasks Apple

    Demons of launch system: ⓘ

    [loaded] 43 tasks Apple

    [loading] 161 tasks Apple

    [operation] 85 tasks Apple

    Launch officers: ⓘ

    [loading] com.google.keystone.agent.plist (2016-07-12) [Support]

    Launch of the demons: ⓘ

    [loading] com.adobe.fpsaud.plist (2016-06-29)

    [loading] com.google.Keystone.daemon.plist (2016-09-11) [Support]
    [loading] com Microsoft.Office.Licensing.Helper.plist (2011-03-10) [Support]

    Launch User Agents: ⓘ

    [loading] com.valvesoftware.SteamClean.plist (2016-05-14) [Support]

    Internet Plug-ins: ⓘ

    FlashPlayer - 10.6: 22.0.0.209 - SDK 10.9 (2016-07-22) [Support]
    QuickTime Plugin: 7.7.3 (2016-04-05)
    Flash Player: 22.0.0.209 - SDK 10.9 (2016-07-22) [Support]
    Default browser: 601 - SDK 10.11 (2016-04-05)
    o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-21) [Support]
    SharePointBrowserPlugin: 14.2.4 - SDK 10.6 (2012-10-03) [Support]
    googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-12) [Support]
    Silverlight: 5.1.10411.0 - SDK 10.6 (2014-03-29) [Support]

    The internet user Plug-ins: ⓘ

    Web of Google Earth plugin: unknown (2013-01-24)

    The Safari Extensions: ⓘ

    AdBlock - BetaFish, Inc. - https://getadblock.com (2015-10-14)

    3rd party preference panes: ⓘ

    Flash Player (2016-06-29) [Support]

    Time Machine: ⓘ

    Mobile backups: WE
    Automatic backup: YES
    Volumes to back up:
    Macintosh HD: Disc size: 499,25 GB disc used: 149,86 GB
    Destinations:
    X. backup [Local]
    Total size: 999,86 GB
    Total number of backups: 7
    An older backup: 05/01/16 17:26
    Last backup: 28/08/16 23:43
    Size of backup drive: adequate
    Backup size 999,86 GB > (disc 149,86 GB X 3)

    Top of page process CPU: ⓘ

    11% Firefox
    4% kernel_task
    3% hidd
    2% sandboxd
    2% WindowServer

    Top of the process of memory: ⓘ

    1.00 GB Firefox
    457 MB kernel_task
    291 MB mdworker (15)
    143 MB mds_stores
    90 MB Microsoft Word

    Information about virtual memory: ⓘ

    36 MB Free RAM
    3.96 GB Used RAM (657 MB cache)
    0 B Swap used

    Diagnostic information: ⓘ

    Sep 11, 2016, 16:37:21 Self test - passed
    Sep 11, 2016, 09:20:57 ~/Library/logs/DiagnosticReports/suggestd_2016-09-11-092057_[redacted]. Crash

    /System/Library/PrivateFrameworks/CoreSuggestions.Framework/versions/A/support/s uggestd

    Thank you in advance for your answers - I'm just at a loss for what could be the real problem!

    You Mbps HARD drive is suspect.  Start the recovery (COMMAND-R) partition and select in menu 4 disk utility.  Run disk utility > first aid > repair.

    Unrelated, but your battery has seen a lot of use.  I suggest to replace.

    Ciao.

  • My MacBook Pro runs very slowly.  I El Captain 10.11.4 rare apps on it, most are closed while I'm on safari.  My photos take a 125 gb storage capacity.  If that is the question, what external hard drive is recommended?  If not, what is?

    My MacBook Pro runs very slowly.  I El Captain 10.11.4 rare apps on it, most are closed while I'm on safari.  My photos take a 125 gb storage capacity.  If that is the question, what external hard drive is recommended?  If not, what is?

    Download and and publish a report of Etrecheck:

    http://etrecheck.com/

    Ciao.

  • My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

    My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

    Reinstall OS X from scratch and add more RAM.

    Ways to help make a slow Mac faster

    17 reasons why your Mac runs slower than expected

    Slow performance of Mac? This Article addresses!

    Difficulty of slow start in OS X | MacFixIt - CNET Reviews

    6 easy tips to speed up OS X Yosemite on your Mac.

    Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

    Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

    Before Mavericks

    Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

    Mavericks and later versions

    Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

    Things you can do to solve the slow Downs

    If your computer seems to run slower, here are some things you can do:

    Start with tours: OS X maintenance - MacAttorney;

    The X Lab: the X-frequently asked questions.

    " Safe mac" Mac Performance Guide;

    " Safe mac" the myth of the dirty Mac;

    Maintenance fast Mac Help.

    Start in Safe Mode , and then repair your hard disk and permissions:

    Fix the hard disk and permissions before Lion

    Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

    Repair the hard drive - Lion-Lion/mountain/Mavericks

    HD recovery start:

    Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

    When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

    Restart your computer normally and see if it helped at all. Then do little maintenance:

    For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

    Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

    Suggestions for OS X maintenance

    OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

    OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

    Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

    Useful links about malware Protection

    "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

    Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

    The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

    Difficulty a few pop ups browser that supported Safari

    Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

    Quit Safari

    Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

    Relaunch Safari

    If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

    It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

    An excellent link to read is Tom Reed Mac Guide of malicious programs.

    Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

    Check out these articles from Apple:

    Mac OS X Snow Leopard and malware detection

    OS X Lion-Protect your Mac against malicious software

    OS X Lion mountain - protect your Mac against malicious software

    OS X Mavericks-Protect your Mac against malicious software

    On the quarantine of file under OS X

    If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

    The user Joe Bailey comes this equally useful advice:

    The facts are:

    1. There is no anti-malware software can detect 100% of malware out there.

    2. There is no anti-malware that can detect all targeting the Mac.

    3. the best way to prevent breaches the most is for you as the user is aware that

    the most successful malware attacks rely on sophisticated social engineering

    techniques preying on human greed, * and fear.

    4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

    your computer is designed to trick you into installing their malware thinking it's a

    protection against malware.

    5. some of the anti-malware market products are worse than malware

    go where they are supposed to protect you.

    6. be careful where you go on the internet.

    7. don't download anything from sites, you know are safe.

    8 avoid links that you receive in email, always be wary, even if you get something

    you think a friend is, but that you did not expect.

    9. If there is any question in your mind, then assume that it is malware.

    Troubleshooting Applications

    I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

    If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

    Basic backup

    For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

    1. a panel of Time Machine preferences as part of the system of preferences;

    2. a request for Time Machine, located in the Applications folder. It's

    used to manage backups and restore backups. Time Machine

    requires a backup drive that is at least twice the capacity of the

    drive being backed up.

    You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

    1 Carbon Copy clone

    2. get backup

    3 already seen

    4 superDuper!

    5. Synk Pro

    6. Tri-Backup

    Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

    Referenced software can be found at MacUpdate .

    Additional tips

    Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

    Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

    Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

    Check for applications that may be hogging the CPU:

    Before Mavericks

    Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

    Mavericks and later versions

    Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

    This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

  • MacBook pro retina bootcamp

    Everyone try to launch LabVIEW in bootcamp on the new Macbook Pro retina? More specifically, how the block diagram to watch full ground? Sharing of all other comments/experiences would be appreciated., for example how the standard fonts LV resemble different resolutions. Carsten Thomsen

    Just got a 13 inch MacBook Pro (early 2013 Version).

    Installed without any problems training camp.

    Windows 7 by default with the scale display 'Big' 150%, and this value gives a slightly fuzzy appearance.

    From my experiences, I suggest the following instead:

    Above the default setting (100%).

    Run the MBA to 1680 x 1050 screen. It is a good Windows 7 settings for the MacBook to the retina and adjusts well on minimal blur.  Boards prior to LabVIEW and diagrams are very readable and editable parameter to.

    For a Pixel Perfect restitution, you must run either 2560 x 1600 precisely half or 1280 x 800.

    If you have the eyes of an eagle (OR), 2560 x 1600 is a screen perfect beautiful pixel, but stuff is small.

    But, with an external external 24 inch 1920 x 1200, you get a nice size chart, but the best is with an external display 27-inch 2560 x 1600, which has diagrams LabVIEW very modifiable and readable and is also pixel perfect.

    So my LabVIEW setting recommended for Mac retina machines would be in 1680 x 1050 for the 13 "screen laptop (1920 x 1200 for laptop 15 inch (although I have not tried the 15" with this setting) and 1920 x 1200 for a 24 inch external or 2560 x 1600 for a 27 inch external.)

    Of course, you can also add an additional external display via the Thunderbolt # 2 port, also up to 27 inches / 2560 x 1600.  And if you really want to "pig" you can throw a third screen HDMI HDMI port.

    Happy wiring.

    Carsten

  • Hello everyone, I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro, Win10/Bootcamp. Is anyone know the procedure to get the display to work with Bootcamp Windows 10?  I have connected screen but no picture. TY

    Hi all

    I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro Win10/Boot Camp running. Is anyone know the procedure to get the display to work with Bootcamp/Windows 10? Is there a setting in the training Camp that must be turned on to make it work? I have connected screen but could not get a desktop display.  Any help would be really appreciated! TY

    The monitor should have a TB and adapter power connector. The monitor works on both OSX. ? If so, shut down of windows, connect monitor and start Windows. Your TB 2012 monitor is not plug-and-play with Windows.

    Please see ports Thunderbolt and views: frequently asked questions (FAQ) - Apple Support .

    1. the "hot pluggable" Thunderbolt devices using Windows with Boot Camp?

    Thunderbolt hot plugging is supported under Windows 8 or 8.1 on all Macs from 2014 and later.

    For all other Mac computers, Windows 7, 8 and 8.1 scans and active them Thunderbolt devices connected to ports Thunderbolt during the Windows startup process. If your device has been plugged in not at startup, Windows detects not without a reboot.

  • MacBook pro 2015 bootcamp error

    Hi all

    I have a MacBook pro, 2015, with 10 Windows boot camp on it (300 GB Mac, PC 200 GB)

    Windows and Mac have been working fine, until yesterday

    I tripped over the cable and disconnected the device (no problem, right?) but it off instantly, even if it had a decent amount of battery left and noticed a time of incredibly long boot, but Windows (which was what it was defined on) seemed fine, so I don't think about it

    But today I tried to use the side mac and I have serious problems

    -Incredible Lag (I pressed the H key, as a test and it came 2 minutes later)

    -Controls unresponsive (keys don't line up with what has been typed)

    -The mouse move (he jumped to a place randomly after trying to move)

    I did not connect, so I don't know anything about the problem

    If anyone has had this problem or knows something about it, I'd be delighted to hear your advice

    Thank you!

    Stop

    Disconnect all external devices

    Reset SM

    Reset the management system (SCM) controller on your Mac - Apple Support

    start in safe mode

    Try safe mode if your Mac does not end commissioning - Apple Support

    check the operation of your system

    with deleted devices, restart normally.

    Recheck the system.

    If the problem persists, you can view a report of etrecheck for more Analytisis

    www.etrecheck.com

  • My Photos runs very slowly with my MacBook Pro

    My Photos runs so slowly that it tests my patience.  I have to restart my computer every time I open it.  I read a previous post about the execution of Etrecheck, and it seems that I need to install more RAM.  Is this the only question?

    I enclose my report of Etrecheck

    EtreCheck version: 2.7.7 (237)

    Report generated 2016-01-26 05:52:06

    Download EtreCheck from http://etrecheck.com

    Duration 07:16

    Performance: Below average

    Click the [Support] links to help with non-Apple products.

    Click [details] for more information on this line.

    Problem: Computer is too slow

    Hardware Information:

    MacBook Pro (13 inch, late 2011)

    [Data sheet] - [User Guide] - [Warranty & Service]

    MacBook Pro - model: MacBookPro8, 1

    1 2.8 GHz Intel Core i7 CPU: 2 strands

    4 GB of RAM expandable - [Instructions]

    BANK 0/DIMM0

    OK 2 GB DDR3 1333 MHz

    BANK 1/DIMM0

    OK 2 GB DDR3 1333 MHz

    Bluetooth: Old - transfer/Airdrop2 not supported

    Wireless: en1: 802.11 a/b/g/n

    Battery: Health = Normal - Cycle count = 540 - SN = 9G2060DSED3NB

    Video information:

    Intel HD Graphics 3000

    Color LCD 1280 x 800

    Software:

    OS X Yosemite 10.10.5 (14F1509) - since the starting time: 10 hours

    Disc information:

    APPLE HDD HTS547575A9E384 Disk0: (750,16 GB) (rotation)

    EFI (disk0s1) : 210 MB

    HD (disk0s3) [recovery] recovery: 650 MB

    Macintosh HD (disk 1) /: 748,93 (Go 123,22 free)

    Storage of carrots: disk0s2 749.30 GB Online

    HL-DT-ST DVD - RW GS31N)

    USB information:

    Computer, Inc. Apple IR receiver.

    Apple Inc. FaceTime HD camera (built-in)

    Apple Inc. Apple keyboard / Trackpad

    Apple Inc. BRCM2070 hub.

    Apple Inc. Bluetooth USB host controller.

    Lightning information:

    Apple Inc. Thunderbolt_bus.

    Guardian:

    Mac App Store and identified developers

    Kernel extensions:

    / System/Library/Extensions

    com.seagate.driver.PowSecDriverCore [no charge] (5.2.6 - 10.4 SDK) [Support]

    / System/Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns

    com.seagate.driver.PowSecLeafDriver_10_4 [no charge] (5.2.6 - 10.4 SDK) [Support]

    com.seagate.driver.PowSecLeafDriver_10_5 [no charge] (5.2.6 - 10.5 SDK) [Support]

    com.seagate.driver.SeagateDriveIcons [no charge] (5.2.6 - 10.4 SDK) [Support]

    Startup items:

    TiVoDesktop: Path: / Library/StartupItems/TiVoDesktop

    WDMyBookServiceStartupItem: Path: / Library/StartupItems/WDMyBookServiceStartupItem

    Startup items are obsolete in OS X Yosemite

    Launch system officers:

    com.apple.CallHistoryPluginHelper.plist [killed]

    com.apple.CallHistorySyncHelper.plist [killed]

    com.apple.Maps.pushdaemon.plist [killed]

    com.Apple.icloud.fmfd.plist [killed]

    com.Apple.scopedbookmarkagent.XPC.plist [killed]

    com.Apple.telephonyutilities.callservicesd.plist [killed]

    6 killed process lack of RAM

    Launch system demons:

    com.Apple.awdd.plist [killed]

    com.Apple.ctkd.plist [killed]

    com.Apple.icloud.findmydeviced.plist [killed]

    com.Apple.ifdreader.plist [killed]

    com.Apple.nehelper.plist [killed]

    com.Apple.softwareupdated.plist [killed]

    com.Apple.wdhelper.plist [killed]

    [operation] com.seagate.TBDecorator.plist [Support]

    7 killed process lack of RAM

    Launch officers:

    [loading] com.google.keystone.agent.plist [Support]

    [loading] com.oracle.java.Java - Updater.plist [Support]

    Launch demons:

    [failure] com.adobe.fpsaud.plist [Support]

    [loading] com.google.keystone.daemon.plist [Support]

    [loading] com.malwarebytes.MBAMHelperTool.plist [Support]

    [loading] com.microsoft.office.licensing.helper.plist [Support]

    [loading] com.oracle.java.Helper - Tool.plist [Support]

    User launch officers:

    com.apple.MobileMeSyncClientAgent.plist [failure]

    [operation] ws.agile.1PasswordAgent.plist [Support]

    Items in user login:

    iTunesHelper hidden Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

    EvernoteHelper UNKNOWN (missing value)

    TuneupMyMac UNKNOWN (missing value)

    1Password UNKNOWN (missing value)

    Dropbox application (/ Applications/Dropbox.app)

    Request for EvernoteHelper (/ Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)

    HP Scheduler application (/ Library/Application Support/Hewlett Packard/Software Update/HP Scheduler.app)

    Other applications:

    [ongoing] 2BUA8C4S2C.com.agilebits.onepassword4 - helper

    [ongoing] com.Apple.XPC.launchd.oneshot.0x10000003.Google Chrome

    [ongoing] com.Apple.XPC.launchd.oneshot.0x10000011.EtreCheck

    [ongoing] com.evernote.EvernoteHelper.51152

    [ongoing] com.getdropbox.dropbox.280624

    [ongoing] com.microsoft.Word.44052

    [ongoing] com.Microsoft.AutoUpdate.FBA.269548

    [ongoing] JP.co.Canon.cijscannerregister.83244

    Plug-ins Internet:

    DirectorShockwave: Version: 11.0.0r430 [Support]

    o1dbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [Support]

    Web of Google Earth plugin: Version: 6.1 [Support]

    Default browser: Version: 600 - SDK 10.10

    OfficeLiveBrowserPlugin: Version: 12.2.8 [Support]

    RealPlayer Plugin: Version: unknown [Support]

    Silverlight: Version: 5.1.40416.0 - SDK 10.6 [Support]

    FlashPlayer - 10.6: Version: 19.0.0.245 - SDK 10.6 [Support]

    DivXBrowserPlugin: Version: 2.1 [Support]

    QuickTime Plugin: Version: 7.7.3

    Flash Player: Version: 19.0.0.245 - SDK 10.6 obsolete! Update

    googletalkbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [Support]

    iPhotoPhotocast: Version: 7.0

    AdobePDFViewer: Version: 10.1.1 [Support]

    Center photo Plugin: Version: Center Photo Plugin 1.1.2.2 [Support]

    SharePointBrowserPlugin: Version: 14.6.0 - SDK 10.6 [Support]

    JavaAppletPlugin: Version: Java 8 update 71 build 15 check the version

    User Plug-ins internet:

    CitrixOnlineWebDeploymentPlugin: Version: [Support] 1.0.39

    F5 sam inspection host plugin: Version: 7101.2015.0217.1 - 10.9 SDK [Support]

    Safari extensions:

    1Password

    3rd party preference panes:

    DivX [Support]

    Flash Player [Support]

    Growl [Support]

    Java [Support]

    For Mac OSX [Support] Seagate dashboard

    TiVo Desktop [Support]

    Time Machine:

    Automatic backup: YES

    Volumes to back up:

    Macintosh HD: Disc size: 748,93 GB disc used: 625,70 GB

    Destinations:

    Backup drive Seagate Plus [Local]

    Total size: 2.00 TB

    Total number of backups: 28

    An older backup: 18/10/14, 19:57

    Last backup: 01/15/16, 09:21

    Size of backup drive: adequate

    Backup TB 2.00 size > (disc 625,70 GB X 3)

    My Book 4 2011 [Local]

    Total size: 0 B

    Total number of backups: 24

    An older backup: 25/03/12, 18:58

    Last backup: 12/05/14, 08:30

    Backup disk size: too small

    Size of backup 0 B< (disk="" used="" 625.70="" gb="" x="">

    Top of page process CPU:

    8% WindowServer

    7% DashboardClient

    1% fontd

    1% Google Chrome Helper (4)

    1% kernel_task

    Top of page process of memory:

    473 MB kernel_task

    332 MB Google Chrome Helper (4)

    Google Chrome 127MO

    Mdworker (6) 111 MB

    Finder of 74 MB

    Virtual memory information:

    95 MB free RAM

    3.91 GB of used RAM (1.45 GB being cached)

    52 MB used Swap

    Diagnostic information:

    25 January 2016, 19:28:22 self-test - spent

    Is pictures the only application that is running slowly

  • With the help of Outlook for Windows on my Macbook Pro 13 "(the end of 2013)

    Help! Please, I beg you!

    I'm being forced to adopt Outlook for Windows to interface with a NetSuite product that transfers information back and forth between Outlook and NetSuite. A work requirement. And NetSuite has yet to acknowledge that everyone works in a Windows environment or on a PC.

    In an ideal world, I would like to continue to work in the environment, I am used to use (all my favorites on OS X) when switching from time to time in Outlook for Windows to activate the Netsuite interface.

    Good speed, maybe not as fast in general, I imagine running a Windows operating system parallel through something like VM Fusion would be the option the easier for me, since I go back through the day.

    I'm not an expert user, so I need to keep things simple and stable.

    Your advice would be welcome.

    Thank you very much!

    VirtualBox is free. Parallels and Fusion are commercial products. With any VM product, if you sufficient safe, you can run the Windows host OSX reviews and use Outlook for Windows in the VM to interface with Netsuite.

    Please verify that NetSuite is supported under Windows on a virtual Mac machine.

    Another option is to use Bootcamp/Windows and use a VM engine to import the BC/Windows as a virtual machine.

  • MacBook Pro 15 "retina, end of 2013, black screen of

    I had been on a trip, using the mac to the airport before our last flight, closed the lid (standby mode). Placed in the bag next to my Tablet back (usually had a little space between them). When I got home I tried to reactivate and at first thought he died. power cord plugged in and he was charging yellow, left charging for a wile then tried to start it, after several reboots, I saw that he seemed to be starting but just no display (I saw the Apple turned on, and caps lock led) if I listened with attention I could here the boot sound. A day later, I found a small HDMI TV and cable, hooked to the TV and as I suspected had image and a machine perfectly functional but not display. At this point, he began to display what appeared to be the symbol of apples cut into small pieces, then spread over the screen like a slinky. (see image below). I then closed the lid to put to sleep (so that I could do the same thing) and image TV remained, so I reopened the laptop screen and Wallah, the screen was back to normal. He works since then but I am afraid ir can return. is this switch in the lid, a UPS driver, graphics, software or what?

    You can exclude any hardware problem by running Apple Hardware Test.

    Better to detect a problem now rather than later.

  • MacBook Pro (retina, 15 inches, end 2013) battery became fat

    Hey there Apple and community!

    Recently, subject that happened. Battery has become so big, so my MBP can stand on these things of rubber on the bottom. Is this dangerous? What should I do?

    Yes. Please make an appointment at the Apple Store - Genius Bar store and bring it into service. If you are in the United States or is unable to make an appointment in this way, contact your Apple store. You have replaced the battery as soon as POSSIBLE.

Maybe you are looking for

  • Yoga touchscreen works do not...

    Hey everybody, I picked up my Yoga today, and I love it. However, about an hour ago the touch screen went completely insensitive. The last thing I remember to do, before noticing the touch screen becomes unresponsive, was installing the Android SDK.

  • Need recovery media

    I'm looking for recovery disks for my ENVY 17-1011NR. The unit supplied with Windows 7 64 bit Home Premium edition. I am residing outside the United States and cannot buy directly from HP. Regional offices of HP that end were not useful. Can someone

  • reformat questions__do I remove the old drive c and restalled

    I'm clearly on the old diskRestalled drivers... the hardest thing I'm going to now who to installed

  • Native UI in Flex Mobile Application action bar

    Hi all I managed to port sample WeatherGuesser of FDT Mobile AS Application and market. But how to do so that the port in Flex Mobile application. I would use native look of the action bar, back and all that. are there opportunities to achieve. Thank

  • HP desktop icon does not open

    I have a deskjet 2050 j510 on windows8 * 64-bit I can get unit to print by typing Ctrl P but clicking the icon does not open so I can't scan. What do I do?