My mapping is stuck in the Middle

Similar Questions

• BlackBerry smartphones stuck in the Middle when I try to update my device

  Hello

  I have blackberry bold 9790 my software bundle 7.0 2254 I was trying to update 7.1.0.2039

  so when the unit start back up it stuck in the middle and now I can't use my blackberry or make calls

  Please advice what should I do?

  However, I tried to remove the battary and put it again but its also show that

  

  Hi abucci1990

  Do you have a previous backup of your device, because to recover your device from this current situation you lose data within your device, try the steps to recover your device from this current situation:

  (Credit JSanders)

  There are two methods for recovering for you to try:

  One:

  • Open Blackberry Desktop Software & connect your device with the PC using the USB cable, without inserting the battery.
  • You have three Retry option, update or cancel, and then click Update.
  • Once it is at the stage of the "initialization of pocket" update, then insert the batteries.
  • If this does not work, and you get stuck on the safeguarding of social data feeds, go to the second method below.

  Second:

  • Start your BlackBerry in safe mode.  Article ID: KB17877 how to start a mode BlackBerry smartphone without failurehttp://www.blackberry.com/btsc/KB17877
  • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
  • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
  • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
  • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.

• I train for adobe flash, but it gets stuck in the Middle download saying "close idvault. Cannot find where to close the application.

  I train for adobe flash, but it gets stuck in the Middle download saying "close idvault. Cannot find where to close the application.

  Click Start, type: Internet Options

  Press enter

  Select the "Advanced" tab

  Under reset Internet Explorer settings, click "reset".

  This should restore the Internet Explorer default settings.

  Then reinstall Flash Player

  http://get.Adobe.com/flashplayer/

  ----------

  Flash Player

  Troubleshoot installation of Flash Player for Windows

  http://kb2.Adobe.com/CPS/191/tn_19166.html

  Troubleshooting player stability and performance

  http://blogs.Adobe.com/JD/2010/02/troubleshooting_player_stabili.html

  Uninstaller

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Flash Player Support Forum

  http://forums.Adobe.com/community/webplayers/flash_player

• Stuck in the middle of all pages footer

  Help!  It is the closest, I had to publish a Web site that says a lot for Muse. I didn't like my Favicon went so to change and eventually remove the background color and the color of the page, but ends up having the new favicon in place. Page color and background in place. I think I managed it to the State the main master. Muse, but didn't want it to be that easy so I now have my foot stuck in the same place in the middle of all my pages. What have I done? It was supposed to be a final cut before the release. Please, any help would be appreciated.

  Looks like you just need to mark your items in the footer as a footer item. Right-click on your footer elements in your model, and then select "footer Element. This should force to the bottom of the page.

  

• BlackBerry Smartphones text and email bottom bar stuck in the middle of the screen

  the lower text of my flashlight bar (the one with delete to answer etc.) went up randomly in the middle of my screen. Sorry to be so vague but does anyone know how to fix this?

  Nevermind fixed it.

  just pulled on the screen the keyboard then slid the phone open again and he disappeared.

• Stuck in the middle of a Business Catalyst - Adobe Muse blog footer

  Hello to everyone in the Adobe / Community Business Catalyst.

  I love BC and really began to enjoy the connection between BC and Muse. I created a blog between Muse and before BC without having this problem, but for some reason, it just around the blog / connection muse will not so smooth. I created the page template using the {tag_pagecontent} and created 2 separate blog templates for 2 different items in the website (the two pages share the same page master, just had slightly variable content on each model in British Colombia). I did the HTML box down to the bottom of the page everything as before, so the blog could expand each page accordingly. When I published my Web site, footer remained in the middle of the page so that the blog extended behind her. I made everything in my foot was checked as a"footer", but I've always had this problem. I'd like an overview as to why this is happening. I checked to see if the provision of the content layer may affect what anyone, but no luck there. If you want to view the pages in question, then please visit here Blog & tutorials first page and second page here photography Pure presence .

  Please help me understand what is happening with these feet! I promise you I checked everything accordingly as part of footer!

  

  Hey, I actually solved this simply uncheck the "sticky Footer" in the menu of the site properties. What is the sticky footer is automatically snap the foot to the bottom of the page no matter what screen size. For some reason, he has problems with Adobe Muses BC models you generate so if you uncheck sticky footer, you should be able to make it work. I hope this helps! If you need assistance most, you can find me at designs that connect | The pure presence, LLC . Best wishes.

• Procedure stuck in the Middle

  Hi all

  I performed my procedure that contains multiple loops, slider, collection and so forth, now its like 5 hours and the process is still ongoing, can anyone suggest me how to debug this kind of mistake, actually I want to know what the code area is a problem. Thanks in advance

  Concerning

  Muzz

  Thanks for the answers, but at the moment I can't apply the logic of debugging my code because my procedure is still running.

  In fact, I want to know what part of my SQL creates problem in my parcel running...

  Have you tried to query V$ SESSION_LONGOPS to see if the statement is listed there?

  https://docs.Oracle.com/CD/B28359_01/server.111/b28320/dynviews_3021.htm

  V$SESSION_LONGOPSDisplays the status of the various operations that run for more than 6 seconds (in absolute time). These operations currently include many backup and recovery, the collection of statistics and execution of queries features, and several operations are added to each version of Oracle.

  To monitor the progress of the execution of query, you must use the cost-based optimizer and you must:

  • Set the TIMED_STATISTICS or SQL_TRACE parameterstrue
  • Collect statistics for your objects with the ANALYZE statement or the DBMS_STATS package

  You can add information to this point of view on long-term application-specific operations using the DBMS_APPLICATION_INFO.SET_SESSION_LONGOPS procedure.

  As this quote doc says the time to think about debugging, what a "routine procedure" BEFORE run you it.

  You should instrument the code so that it captures information of interest (for example a tablel newspaper) so that the info can be examined independently by another session.

• I pasted in the middle of the upgrade to window 10

  I stuck in the middle of the upgrade to window 10 then I shut down the system and turn it back on and system does not start, how to recover my previous window?

  Try pressing Alt + F10 at startup, the hope is still ok.

  in the case of contrary and you not create the original recovery media:

  Acer recovery media
  WE:
  http://us-store.Acer.com/eRecovery/RCD/

  Canada:
  http://Caen-store.Acer.com/eRecovery/RCD/

  If you live outside the United States and the Canada, you must call/email your regional Acer support service:
  http://www.Acer.com/worldwide/support/

• Cursor stuck in the center of the screen

  All of a sudden the cursor on my son's pc is stuck in the middle of the screen.  It's a mouse optical usb.  I checked that the mouse (3 different ones) works on other computers in the House.  I tried to move the mouse to different ports, but the cursor remains blocked.  I rebooted the computer several times, both with the wired mouse and without the mouse, in him after reconnecting.  When I go to Device Manager (navagating around using the keyboard... fun, not!) there is no category for mice and other pointing devices, do not know if this is relevant or not.  This computer runs on Windows XP.  I would be grateful for any suggestion, at this point, I feel I have ruled out problems with ports and mouse/mice, do not know where to look.

  So, you have a USB keyboard or a PS/2 keyboard?

  What is the brand and model of your mouse?

  You may also download USBDevView from http://www.nirsoft.net/utils/usb_devices_view.html and see if it can detect the presence of your mouse in the registry.

  Hi PML... I appreciate your help.

  It is a usb mouse.  I have access to 3 all seem to run on other computers.  So I'm trying to use the computer problem is an optical mouse, Kensington, model K64381.  OK, so I downloaded the driverboost... and I'm ready to scan, but even if I am using the tab key, I can't land on the button 'Search now' huge... it never stops down on the link 'leave driverboost'... any suggestions.

  I meant the keyboard , not the mouse.  If you have a PS/2 keyboard, then you can safely uninstall all the USB root and hubs controllers (working from the bottom up) in Device Manager.  When you restart, Windows should detect the hardware and reinstall everything.  It may - or may not - the problem of your system, not recognizing the mouse when it is connected.

  The problem if you have a USB keyboard is that you then will be temporarily withoutANY interface to the computer... and IIRC, you must meet certain dialogs during the phases of detection.  If you can't answer (because you do not have a mouse or a keyboard), nothing is reinstalled.

  Even if you do not have a PS/2 keyboard, before uninstalling the hubs and USB controllers, you can search the devices 'ghosts' that can possibly cause a conflict that prevents your system by recognizing the mouse.  The directions are here:http://support.microsoft.com/kb/315539 replace step 1 with the following, which does not use the mouse:

  Windows key + R > cmd > Enter

  I'm not sure what you mean regarding the "Driverboost."  I wanted to say to you allows you to download a utility named 'usbdeview.  Direct download (for a zip file) link ishttp://www.nirsoft.net/utils/usbdeview.zip if you are able to unzip the file, you must then just run usbdeview.exe and he should do the scan automatically.  There is no button "scan now".

  USBDeview.exe should do the research work in the registry automatically.  If you want to consult the registry yourself, start by running regedit and navigate to

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum

  Should a subkey under Enum named HID, and a named another USB.  If you develop any of these two subkeys (based on your device manager, you can miss the subkey HID completely), you should see a number of entries that begin with the characters Vid.  Here is the 'provider identification' for different devices connected to your computer.

  The VID of Kensington is D 047, then look for an entry or entries that look like this: "Vid_047D & Pid_xxxx" (the xxxx is the "product identification code"; I believe that the value of PID for your mouse 1067, but I could be wrong).

  If you click on the subkey under the Vid for Kensington, you 'should' see details of your mouse.  It should look like this (although it is a Logitech mouse):http://cid-18b259158254905b.office.live.com/self.aspx/.Public/mouse%20reg%20key.jpg

• IPhone crashed the Middle updated and now stuck on the setting of the screen!

  My Iphone has been unusually slow. So I tried to update my phone I thought it's maybe the old version of the IOS that makes my phone lag (I think I downloaded the latest version, 10. something). While trying to update my phone, it crashed at halfway. Now I'm stuck on the screen that appears when your phone has been updated (white background, that invites you to enter the password and put in place). However, after putting in my access code and attempts to connect to the wifi, my phone indicates that the wifi password is incorrect, this is not. Also, when I try to connect through mobile data it shows that "your phone could not be activated because the activation server is not reachable. Try to connect your iphone to iTunes to activate it, or try via the mobile connection in a few minutes... ». As a result, I tried connecting to ITunes and I got a different view of error message saying "ITunes only could not connect to this iphone." An unknown error occurred (0xE8000015).

  Help, please!

  Try If you can to update or restore your iPad, iPhone or iPod touch - Apple Support.

  TT2

• iPod stopped playing in the middle of a song. The screen still shows the song. None of the buttons work. Cannot close the iPod is facing down. How can I fix it?

  my iPod, the generation classic 32 GB, stopped playing in the middle of a song. The screen is stuck on this song. None of the buttons work.  I can't stop the iPod.  How can I fix it?

  Hi, lesliefromhowell!

  Thank you for reaching out by Apple Support communities. After reading your post, I understand that your iPod Classic does not. I count on my iPod for music on the go and want to make sure that you can use your own without problem!

  Relying on the buttons have not helped get the iPod to start playing or to restart, please follow the steps outlined in the article below to reset your iPod.

  Learn how to reset your iPod

  You'll want to use the instructions under the "iPod, iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector)" section. These instructions are the following:

  iPod, iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector)

  To reset your iPod, follow these steps:

  1. Slide the Hold switch to the locked position and then come back!
  2. Hold down Menu and Play/Pause all buttons until you see the logo Apple/iPod (about 6-8 seconds). You may need to repeat this step.

  If you can always reset your iPod, follow these steps:

  1. Connect your iPod to a power adapter and plug the adapter into a power outlet.
     You can also connect your iPod to your computer. Make sure that the computer is on and that it is not set to go to sleep.
  2. Try resetting your iPod again.

  Good listening!

• Apple cards puts the locations shown in the Favorites in the middle of the ocean

  When you click a favorite recorded in the maps, it puts the location in the middle of the Pacific ocean.  It doesn't do this on all of them, just some of them.  In addition, we noted that some favorites are duplicates and one of them will work.  Many of these places are pins fell in the mountains and other places that will be almost impossible to recreate so this is a big deal.  I hope that someone else has had this problem and knows how to fix it!

  Were you able to reproduce the same question on multiple devices when you are connected to the same account? If so, it seems to be linked account. For this, I would like to contact Apple for support and service - Apple supported.

  If you have only noticed this problem on a single device, I try logging in your iCloud account this device and then insert it again in the first place.

• Why can I not see videos from YouTube without the circle in the middle of the screen rotation?

  Whenever I try to watch a movie or a video clip, the screen keeps stuck and the circle in the middle of the screen keeps spinning.

  Sorry for this late reply, but your answer to my problem was exactly what I need! I looked at my films and documentaries since you gave me your suggestion and they are just as good, if not better.

  Thank you SOOO much!

  JAS Abyssinia

• Pavilion dv7t-3000 mobile: stuck on the startup screen, must repeatedly perform a hard reset to fix

  When starting after a successful boot & use, the PC is stuck on the startup screen that is black with the logo blue & white HP in the middle and "press ESC for the start menu" at the bottom left. I have to perform a hard reset to get a normal startup. Everything works fine. I stop the PC from the start menu. At the next startup the PC hangs at the HP splash screen. A hard reset solves the problem, but the problem occurred on & repeatedly.

  Problem was solved by uninstalling a number of HP programs! Unfortunately I have lost the paper on which I wrote exactly what programs I uninstalled. If you find this issue that may arise on your notrbook, try to uninstall the HP programs

• Tungsten E2 - HotSync stuck to the appointment.

  All the previous sessions of the hot sync were no problem.   HotSync full this time, but showed the synchronization of the Agenda has been abandoned.  All the data calendar on the desktop was lost.  I tried to sync again.  Then he got stuck on the agenda and would not continue.  So had to interrupt the it.  Have not been able to get it back again.  Anyone would solve this problem?

  I use bluetooth for HotSync.

  My Tungsten E2 is pocket computer.

  I use Windows 7 Home Premium on my PC,

  Palm desktop 6.2.2 Access

  HotSync Manager 7.0.2

  There may be the database at the source of the problem. Click on the following link for the program called DbFixiT. This program has a trial version that you can download and install on your Palm OS device. The trial version will search the database and then to declare the corruption. You can then search records at the origin of the problem and fix them yourself or you can buy the program and do it automatically repair records.
  
  http://www.pimlicosoftware.com/dbfixit.htm
  
  To install the program, the value of all lines of "doing nothing" except quick installation or install if you use Palm desktop 6.2.
  
  After installing the program on your handheld, the scanner and scan also to BLOBs in the calendar.
  After you clean up the database on the handheld, set the conduit in hotsync for handheld overrides desktop and perform a hotsync.

  If you use Win7 64-bit, you can download and install the drivers USB 64-bit for this version.

  Here is the link to the post on the forum with the link for the drivers.

  http://forums.hpwebos.com/T5/Windows-HotSync/64-bit-Palm-Desktop-drivers-are-here/TD-p/337516

  The best way to protect your data is to export the data in each category of Palm Desktop in a separate folder on your PC.
  
  Create a new folder on your PC somewhere that suits. Name it something like Palm Desktop data. Click on the link below and follow the instructions on this page for the export procedure.
  
  http://KB.hpwebos.com/wps/portal/KB2/common/article/28734_en.html
  Make sure you only select everything for the beach in the export window.
  
  With the data stored in the created folder, make a copy of this file and save it on a USB key, cd - rw or external hard drive.
  
  Whenever you change in Palm Desktop, export the data that has been changed in this file and save again to external media.
  
  With this process you can always import the data in Palm Desktop, whenever you have a problem with the data in Palm Desktop, or if your computer/hard drive/device crash.

  Another backup option is to use NVBackup and backup on a SD card on your E2. Google search for NVBackup for PalmOS, and if you have a 1 GB SD card, you can save the map for disaster recovery.

  Here is a link to a post on the forum about nvbackup.

  http://forums.Palm.com/Palm/Board/crawl_message?Board.ID=hardware&message.ID=49854

  For reference purposes, click the following link to the support page for your device on the kb.hpwebos.com Web page.
  
  http://KB.hpwebos.com/wps/portal/KB/na/Tungsten/E2/unlocked/home/page_en.html

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.