Procedure stuck in the Middle

Similar Questions

• BlackBerry smartphones stuck in the Middle when I try to update my device

  Hello

  I have blackberry bold 9790 my software bundle 7.0 2254 I was trying to update 7.1.0.2039

  so when the unit start back up it stuck in the middle and now I can't use my blackberry or make calls

  Please advice what should I do?

  However, I tried to remove the battary and put it again but its also show that

  

  Hi abucci1990

  Do you have a previous backup of your device, because to recover your device from this current situation you lose data within your device, try the steps to recover your device from this current situation:

  (Credit JSanders)

  There are two methods for recovering for you to try:

  One:

  • Open Blackberry Desktop Software & connect your device with the PC using the USB cable, without inserting the battery.
  • You have three Retry option, update or cancel, and then click Update.
  • Once it is at the stage of the "initialization of pocket" update, then insert the batteries.
  • If this does not work, and you get stuck on the safeguarding of social data feeds, go to the second method below.

  Second:

  • Start your BlackBerry in safe mode.  Article ID: KB17877 how to start a mode BlackBerry smartphone without failurehttp://www.blackberry.com/btsc/KB17877
  • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
  • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
  • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
  • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.

• I train for adobe flash, but it gets stuck in the Middle download saying "close idvault. Cannot find where to close the application.

  I train for adobe flash, but it gets stuck in the Middle download saying "close idvault. Cannot find where to close the application.

  Click Start, type: Internet Options

  Press enter

  Select the "Advanced" tab

  Under reset Internet Explorer settings, click "reset".

  This should restore the Internet Explorer default settings.

  Then reinstall Flash Player

  http://get.Adobe.com/flashplayer/

  ----------

  Flash Player

  Troubleshoot installation of Flash Player for Windows

  http://kb2.Adobe.com/CPS/191/tn_19166.html

  Troubleshooting player stability and performance

  http://blogs.Adobe.com/JD/2010/02/troubleshooting_player_stabili.html

  Uninstaller

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Flash Player Support Forum

  http://forums.Adobe.com/community/webplayers/flash_player

• Stuck in the middle of all pages footer

  Help!  It is the closest, I had to publish a Web site that says a lot for Muse. I didn't like my Favicon went so to change and eventually remove the background color and the color of the page, but ends up having the new favicon in place. Page color and background in place. I think I managed it to the State the main master. Muse, but didn't want it to be that easy so I now have my foot stuck in the same place in the middle of all my pages. What have I done? It was supposed to be a final cut before the release. Please, any help would be appreciated.

  Looks like you just need to mark your items in the footer as a footer item. Right-click on your footer elements in your model, and then select "footer Element. This should force to the bottom of the page.

  

• BlackBerry Smartphones text and email bottom bar stuck in the middle of the screen

  the lower text of my flashlight bar (the one with delete to answer etc.) went up randomly in the middle of my screen. Sorry to be so vague but does anyone know how to fix this?

  Nevermind fixed it.

  just pulled on the screen the keyboard then slid the phone open again and he disappeared.

• Stuck in the middle of a Business Catalyst - Adobe Muse blog footer

  Hello to everyone in the Adobe / Community Business Catalyst.

  I love BC and really began to enjoy the connection between BC and Muse. I created a blog between Muse and before BC without having this problem, but for some reason, it just around the blog / connection muse will not so smooth. I created the page template using the {tag_pagecontent} and created 2 separate blog templates for 2 different items in the website (the two pages share the same page master, just had slightly variable content on each model in British Colombia). I did the HTML box down to the bottom of the page everything as before, so the blog could expand each page accordingly. When I published my Web site, footer remained in the middle of the page so that the blog extended behind her. I made everything in my foot was checked as a"footer", but I've always had this problem. I'd like an overview as to why this is happening. I checked to see if the provision of the content layer may affect what anyone, but no luck there. If you want to view the pages in question, then please visit here Blog & tutorials first page and second page here photography Pure presence .

  Please help me understand what is happening with these feet! I promise you I checked everything accordingly as part of footer!

  

  Hey, I actually solved this simply uncheck the "sticky Footer" in the menu of the site properties. What is the sticky footer is automatically snap the foot to the bottom of the page no matter what screen size. For some reason, he has problems with Adobe Muses BC models you generate so if you uncheck sticky footer, you should be able to make it work. I hope this helps! If you need assistance most, you can find me at designs that connect | The pure presence, LLC . Best wishes.

• My mapping is stuck in the Middle

  Hello
  
  My version of OWB is 11.1.0.7. I recently migrated the mapping to new server and mapping works well. When I start the workflow manually, it wroks great.
  Work is scheduled at 12:50.
  
  SQL > select status, failure_count, activated from dba_scheduler_jobs
  2 where owner = 'IAEBT_DW' and nom_du_travail = 'PF_JOB ';
  
  FAILURE_COUNT ACTIVE STATE
  --------------------------------------------- ------------- ---------------
  RUNNING 0 TRUE
  
  SQL >
  
  SQL > l
  1 Select job_name, value of dba_scheduler_job_args
  2 * where job_name = "PF_JOB."
  SQL > /.
  
  VALUE OF JOB_NAME
  -------------------- --------------------
  PF_JOB 3101
  PF_JOB ScheduledJob
  PF_JOB PF_JOB
  PF_JOB IAEBT_DW
  PF_JOB PF_JOB
  PF_JOB PlatformSchema
  PF_JOB PF
  PF_JOB PlatformSchema
  PF_JOB IAEBT_OWBOWNER
  PF_JOB IAEBT_WSPACE
  
  10 selected lines.
  
  That is the problem.
  
  The task starts at exactly 12:50, and is to keep running. For more than 10 hours now. It is not complete. It has not loaded all data in mini - DW.
  I checked the last_ddl_time for all tables. The date is not changed. My first map load the data into the ETL_START table. But this table has not changed.
  
  This is the lock on the tables.
  
  
  SQL > select b.username, select, c.object_name object, c.object_type,.
  2 b.osuser
  v lock $3 a, v$ session b, object c
  4 where
  5 = c.object_id = a.id1 and select a.sid and
  6 (a.type = "TX" or a.type = 'TM')
  5 m
  
  USERNAME SID OBJECT OBJECT_TYPE OSUSER
  ------------------------------ ---------- ------------------------------ ------------------- -------
  Oracle IAEBT_OWBOWNER 879 CMPSCOCFGCLASSES TABLE
  Oracle IAEBT_OWBOWNER 879 CMPFCOCLASSES TABLE
  Oracle IAEBT_OWBOWNER 879 ALLINTERLINK TABLE
  Oracle IAEBT_OWBOWNER 879 ALLINTRALINK TABLE
  Oracle IAEBT_DW 944 WB_RT_NOTIFY_QUEUE_TAB TABLE
  
  SQL >
  SQL >
  
  How do I trouble shoot this issue?

  Hi Shrinika,
  the first check which service control center runs in the new environment.
  Also check the instance of database AQ_TM_PROCESSES parameter (in SQL * more run the command 'See the AQ_TM_PROCESSES parameter')-it must be greater than 0.

  Kind regards
  Oleg

• I pasted in the middle of the upgrade to window 10

  I stuck in the middle of the upgrade to window 10 then I shut down the system and turn it back on and system does not start, how to recover my previous window?

  Try pressing Alt + F10 at startup, the hope is still ok.

  in the case of contrary and you not create the original recovery media:

  Acer recovery media
  WE:
  http://us-store.Acer.com/eRecovery/RCD/

  Canada:
  http://Caen-store.Acer.com/eRecovery/RCD/

  If you live outside the United States and the Canada, you must call/email your regional Acer support service:
  http://www.Acer.com/worldwide/support/

• Cursor stuck in the center of the screen

  All of a sudden the cursor on my son's pc is stuck in the middle of the screen.  It's a mouse optical usb.  I checked that the mouse (3 different ones) works on other computers in the House.  I tried to move the mouse to different ports, but the cursor remains blocked.  I rebooted the computer several times, both with the wired mouse and without the mouse, in him after reconnecting.  When I go to Device Manager (navagating around using the keyboard... fun, not!) there is no category for mice and other pointing devices, do not know if this is relevant or not.  This computer runs on Windows XP.  I would be grateful for any suggestion, at this point, I feel I have ruled out problems with ports and mouse/mice, do not know where to look.

  So, you have a USB keyboard or a PS/2 keyboard?

  What is the brand and model of your mouse?

  You may also download USBDevView from http://www.nirsoft.net/utils/usb_devices_view.html and see if it can detect the presence of your mouse in the registry.

  Hi PML... I appreciate your help.

  It is a usb mouse.  I have access to 3 all seem to run on other computers.  So I'm trying to use the computer problem is an optical mouse, Kensington, model K64381.  OK, so I downloaded the driverboost... and I'm ready to scan, but even if I am using the tab key, I can't land on the button 'Search now' huge... it never stops down on the link 'leave driverboost'... any suggestions.

  I meant the keyboard , not the mouse.  If you have a PS/2 keyboard, then you can safely uninstall all the USB root and hubs controllers (working from the bottom up) in Device Manager.  When you restart, Windows should detect the hardware and reinstall everything.  It may - or may not - the problem of your system, not recognizing the mouse when it is connected.

  The problem if you have a USB keyboard is that you then will be temporarily withoutANY interface to the computer... and IIRC, you must meet certain dialogs during the phases of detection.  If you can't answer (because you do not have a mouse or a keyboard), nothing is reinstalled.

  Even if you do not have a PS/2 keyboard, before uninstalling the hubs and USB controllers, you can search the devices 'ghosts' that can possibly cause a conflict that prevents your system by recognizing the mouse.  The directions are here:http://support.microsoft.com/kb/315539 replace step 1 with the following, which does not use the mouse:

  Windows key + R > cmd > Enter

  I'm not sure what you mean regarding the "Driverboost."  I wanted to say to you allows you to download a utility named 'usbdeview.  Direct download (for a zip file) link ishttp://www.nirsoft.net/utils/usbdeview.zip if you are able to unzip the file, you must then just run usbdeview.exe and he should do the scan automatically.  There is no button "scan now".

  USBDeview.exe should do the research work in the registry automatically.  If you want to consult the registry yourself, start by running regedit and navigate to

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum

  Should a subkey under Enum named HID, and a named another USB.  If you develop any of these two subkeys (based on your device manager, you can miss the subkey HID completely), you should see a number of entries that begin with the characters Vid.  Here is the 'provider identification' for different devices connected to your computer.

  The VID of Kensington is D 047, then look for an entry or entries that look like this: "Vid_047D & Pid_xxxx" (the xxxx is the "product identification code"; I believe that the value of PID for your mouse 1067, but I could be wrong).

  If you click on the subkey under the Vid for Kensington, you 'should' see details of your mouse.  It should look like this (although it is a Logitech mouse):http://cid-18b259158254905b.office.live.com/self.aspx/.Public/mouse%20reg%20key.jpg

• Help! My iPod Classic 120 G froze. Pale = 'Media-In' and display the screen = "OK to disconnect with a bar in the middle." Tried the reset procedure, press the "Menu and Center." Without success. Any ideas?

  Help! My iPod Classic 120 G froze. Pale = 'Media-In' and display the screen = "OK to disconnect with a bar in the middle." Tried the reset procedure, press the "Menu and Center." Without success. Any ideas?

  See Re: corrupted iPod classic. If she does not really have a reset set it aside and let the battery completely discharge. It should reset itself when you load again.

  TT2

• Back ON param in the middle of the procedure

  Hello world

  Hope all is well on your side. I'm stuck on a problem of PL/SQL coding. I'm using Oracle 11.2.0.3.0. Please find below the script. I have a procedure that has a DML and send me an OUT parameter. DML is run, I need to run a procedure more inside the main procedure at the same rate, but I have no need to wait inside the procedure ends. I have to return the OUT parameter, as soon as my DML statement in the main procedure is finished.

  Main procedure:

  CREATE or REPLACE PROCEDURE INSERT_DATE (v_rows ON NUMBER)

  AS

  BEGIN

  INSERT INTO TEST_DATE (REF_DATE) VALUES (SYSDATE);

  v_rows: = SQL % ROWCOUNT;

  commit;

  execute UPDATE_SP;

  END;

  Procedure of the child:

  CREATE OR REPLACE PROCEDURE UPDATE_SP

  AS

  BEGIN

  UPDATE TABLE SET COL1 = 'TEST ';

  UPDATE TABLE2 SET COL1 = 'TEST ';

  COMMIT;

  END;

  The two proceedings are unrelated to each other by any functionality. Once the insertion will be in TEST_DATE, we UPDATE_SP kick-off procedure. But I am not concerned by UPDATE_SP is completed, or has failed. The only thing is I don't want to wait the INSERT_DATE procedure to wait that the procedure UPDATE_SP in the end to get to the OUTPUT parameter.

  Objective: I need to insert a record in TEST_DATE, back ON setting and kick off UPDATE_SP.

  Please let me know if you need more information.

  Thanks in advance. Answers and comments will be appreciated.

  Concerning

  Dev

  You could create a job (either using dbms_job and dbms_scheduler) who will UPDATE_SP in a separate session of INSERT_DATE.

  If you don't care if UPDATE_SP succeeds or fails, however, why you call it in the first place?

  Justin

• IPhone crashed the Middle updated and now stuck on the setting of the screen!

  My Iphone has been unusually slow. So I tried to update my phone I thought it's maybe the old version of the IOS that makes my phone lag (I think I downloaded the latest version, 10. something). While trying to update my phone, it crashed at halfway. Now I'm stuck on the screen that appears when your phone has been updated (white background, that invites you to enter the password and put in place). However, after putting in my access code and attempts to connect to the wifi, my phone indicates that the wifi password is incorrect, this is not. Also, when I try to connect through mobile data it shows that "your phone could not be activated because the activation server is not reachable. Try to connect your iphone to iTunes to activate it, or try via the mobile connection in a few minutes... ». As a result, I tried connecting to ITunes and I got a different view of error message saying "ITunes only could not connect to this iphone." An unknown error occurred (0xE8000015).

  Help, please!

  Try If you can to update or restore your iPad, iPhone or iPod touch - Apple Support.

  TT2

• iPod stopped playing in the middle of a song. The screen still shows the song. None of the buttons work. Cannot close the iPod is facing down. How can I fix it?

  my iPod, the generation classic 32 GB, stopped playing in the middle of a song. The screen is stuck on this song. None of the buttons work.  I can't stop the iPod.  How can I fix it?

  Hi, lesliefromhowell!

  Thank you for reaching out by Apple Support communities. After reading your post, I understand that your iPod Classic does not. I count on my iPod for music on the go and want to make sure that you can use your own without problem!

  Relying on the buttons have not helped get the iPod to start playing or to restart, please follow the steps outlined in the article below to reset your iPod.

  Learn how to reset your iPod

  You'll want to use the instructions under the "iPod, iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector)" section. These instructions are the following:

  iPod, iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector)

  To reset your iPod, follow these steps:

  1. Slide the Hold switch to the locked position and then come back!
  2. Hold down Menu and Play/Pause all buttons until you see the logo Apple/iPod (about 6-8 seconds). You may need to repeat this step.

  If you can always reset your iPod, follow these steps:

  1. Connect your iPod to a power adapter and plug the adapter into a power outlet.
     You can also connect your iPod to your computer. Make sure that the computer is on and that it is not set to go to sleep.
  2. Try resetting your iPod again.

  Good listening!

• Why can I not see videos from YouTube without the circle in the middle of the screen rotation?

  Whenever I try to watch a movie or a video clip, the screen keeps stuck and the circle in the middle of the screen keeps spinning.

  Sorry for this late reply, but your answer to my problem was exactly what I need! I looked at my films and documentaries since you gave me your suggestion and they are just as good, if not better.

  Thank you SOOO much!

  JAS Abyssinia

• iMac 8.1 stuck on the apple logo

  Model: iMac8, 1

  2.66 GHz Intel Core 2 Duo

  At 2BG memory when the problem started

  Mountain Lion 10.8.5

  Is in trouble with occasional frosts. Would be closed and it should restart very well. About 2 weeks ago, the computer froze. I shut down the computer and restarted. The apple logo came with the spinning wheel, and then just the apple logo.

  I can start safe mode. Tried resetting the PRAM, reset of SCM. Tried to start with all peripherals except keyboard and mouse disconnected. Use the command R to start the computer and went into the disc utilities. Disc checked and it said disc looks OK. Verified permissions. Mistakes came for iTunes more a warning which was not repairable. Fixed permissions. None of these permits to start properly.

  Parle talked anyone computer repair who suggested to unplug the computer, hold the power button while up to one minute, plug the computer back in and pressing the Start button. It came in fine. A few days letter that the computer froze and I had to stop it. You press the Start button, got the spinning wheel, so only the apple logo and apple logo. Start the computer by pressing command + R and reinstalled Mountain Lion. Installation once it stuck at the apple logo again. Active disk. Drive seems to be OK. Permission verified. Permission with iTunes but issues no warning this time. Repaired permissions. Nada.

  Inserted the installation disk, turned on the computer while holding D key. A ran Apple Hardware tools (tests of short or long). This error message came up twice with different numbers of rpm: 4MOT/1/40000003: drive HARD-110. I know that it's the hard drive fan. Computer repair man came out. Thought problem may be because I only had 2 GB of memory and ran only to open the Lion of mountain with several programs. Upgrade to 4 GB memory, which is recognized by the computer. But the computer still does not start correctly. Tried the Single Mode and run/sbin/fsck - fy. Said it seemed OK, but changed the volume. Ran he says once again and everything seemed OK. Still will not start.

  When I start in the disc, part of the grey background Utilities is missing. If you move the cursor on the screen, the gray background fills.

  Also, when I try from normally I get startup chime, the apple logo and the spinning wheel. After that make a spin the wheel stops, there is sort of a Flash, then the wheel goes and remains the apple logo. I can hear the computer tries to do something, then the arrow cursor appears and can be moved around the screen. It's like that.

  Also installed Mountain Lion on a USB key, it made the startup disk and tried to start the computer normally. Still will not start.

  Any ideas or suggestions for what could be wrong or other things to try?

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy text from a particular web page (not this one) to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

  In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

  11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.