My MMC, COMPMGMT. MSC refused to open.

every time I want to open compmgmt.msc "MMC will not work with a version of Internet Explorer prior to version Internet Explorer 5.5" happens what to do to fix this?

Hi Kokorito_nabi,

Please take a look at the thread similar here with a solution as possible.

I hope this helps!

Tags: Windows

Similar Questions

  • Could not open computer management. I m, like__MMC error message cannot open the file C:\WINDOWS\system32\compmgmt.msc

    I am the administrator total privileage still i'm getting the following error...

    MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

    It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

    I am the administrator total privileage still i'm getting the following error...

    MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

    It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

    Hey Sandy_Nepal

    read the answer below

    http://www.Winhelponline.com/articles/72/1/error-message-when-you-try-to-open-a-MMC-console.html

    http://www.allpostnews.co.UK/II27/compmgmt%20msc%20error%20messag.php

    Walter, the time zone traveller

  • How to Access Manager for devices in the Windows 7 Ultimate Computer of the Microsoft Management Console (mmc) or Windows XP Professional computer using the computer (compmgmt.msc) management?

    I want to access Device Manager on a Windows 7 Ultimate remote computer from a computer running Windows XP Professional.  Whenever I have use (compmgmt.msc) computer management and access the remote computer, I connect successfully to it.  But when I select the Device Manager it says: 'access denied '.  I checked the security policy (secpol.msc) and I chose the deny access to this computer from the network and there no users and groups listed but it says that its default value is invited.  Can you tell me the step by step procedure?

    Thank you.

    In addition to changes to the GP, you must also do the following.

    Open services.msc, locate the "Remote registry" service, start the service and set to start automatically.

  • Thunderbird began refusing to open e-mail, unless I open them in a new window. Why?

    Moz Thunderbird has recently started to refusing to open emails when I click on them, or links in the emails... for example a prescription all complete but the last step, which you bird refuses to open. I'm running XP (Yair I know)... I had Norton knock-out Mozilla DURATION several times recently and have therefore had to re - install Firefox and you bird several times.

    Welcomes any solution resulting in reliability custom of you bird restoration.

    godzillozzy, is it fixed?

  • Safari 10.9.5 refuses to open

    My Safari on Mac OS X 10.9.5 refuses to open I tried re starting from the SafeMode to no avail. I tried to the top of standings in Capitan, but the process crashes.

    Try to open Safari while holding down the SHIFT key.

    When it opens correctly can do

    Safari-> clear history... and erase all history data and the Web site.

  • Satellite Pro 4280: refuse to open after installing W2k

    Hello

    I recently bought a toshiba laptop from bankrupt companies. Unfortunately, after installation of windows 2000, the laptop refuse to open. He needs a special installation CD? is this true and how can I get it? Thank you all, kate

    Hello

    Have you installed the Toshiba drivers needed?
    If you visit this from Toshiba Web site:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

    I found a lot of drivers Toshiba W2k. I'm sure after the installation of the required drivers, the device will not work properly.

  • Satellite L775 - 12L refuses to open the SD card

    Hello!

    I have a recent problem with my laptop L775 - 12L about the SD card reader.

    Since yesterday my computer refuses to open the SD card while working always before.
    I did nothing with my computer and now when I insert my usual SDHC card 8 GB asks me to format the card.

    I just downloaded "Card reader controller" driver site of Toshiba, but nothing has changed.

    I'm quite desperate because I'm just back from vacation and I can't wait to download my pictures to my computer.
    Could someone help me solve this problem pleeeaaaase?

    Thanks in advance!

    Virginia

    What card you use exactly? Card SD or SDHC card?
    As far as I know the handles L775 card reader:
    SD 8MB - 2GB and SDHC 4GB - 32GB

    So 8 GB SD cards are not supported by card reader.
    But SDHC should be supported.

    Are you able to format the card in FAT32 format?
    Do this and remove the mark of the quick format option

  • iMessages refuses to open on macbook

    Last night, iMessages on my Macbook Pro was working fine.  This morning, he refuses to open and I continually have to force quit.  I restarted my computer several times for nothing doesn't.  The only thing I can think is I changed the Admin password before going to bed, but can't see how this is related.  Help, please!

    May be a corrupt .plist.

    Make a backup, preferably 2 backups on 2 separate drives.

    Quit the application.

    Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library. Then go to Preferences/com.apple.iChat.plist.  Move the .plist on your desktop.

    Restart your computer, open the application and test. If it works fine, delete the plist for the office.

    If the application is the same, return the .plist where you got it, crushing the latest.

    If this does not work, repeat the above, but remove the com.apple.imagent.plist

    Thank you Leonie and Ralph Johns (UK) , that some information contained in the present.

    If this does not work,

    Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

    Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

    Isolate a problem by using a different user account

    If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

    Safe mode

    Safe mode - Mavericks

  • In 'my computer' pdf files have suddenly refusing to open in adobe reader 8 and 10. OS is XP sp2. the file appears for a split second and disappears. What needs to be done?

    My PC is running windows xp, sp2. Previously, I copied several PDF files on the net and stored in my documents and periodically SURFs on the pages. All of a sudden, the appearance of the Office has migrated to the default settings, but they have been reset. Regarding pdf files that have been copied through adobe reader 8.2 for my ducuments they refuse to open, even after the upgrade to version 10.0.1(current de lecteur) the file is displayed for a split second and disappears. Clean your PC with Avast does not indicate something wrong. Went to RUN regedit .exe and checked in all the boxes of the machines:-key-local etc. to permit and permission, but they were of no use. How to remedy this. ? Can I format Adobe and reloaded via net? Please give me a solution.

    Took a while to get here. Try using the PDF reader.
     
     
    If the files try to open it with Adobe, create a file association.
     
    Right-click on the file.
    Select: Open with on the shortcut menu.
    Click: Choose [default] program.
    Letter: Foxit Reader.
    Check: Always use the selected program to open this type of file.
    Click OK.
     
  • a program refuses to open and I can't reinstall it

    determineregistryquality

    Hi one of my programs refused to open - I'm unable to reload a program - when I uninstall and reload I get it-dr watson postmortem of guy - suggest my registry is the cause - my cc cleaner says registry is ok-1, how whether the real health of the registry? sweeping free but pay for fix cleaners all say I have questions-2 is the paid version of cc cleaner work better, then the free version? Thank you scottmcny

    Hello
    try using this link to reinstall Active X
    http://support.Microsoft.com/kb/280579
    b Eddie

  • Microsoft Visual C++ Runtime Library Runtime Error reports and refuses to open PDFs on the internet

    Dear Sir/Madam (to the right)

    Microsoft Visual C++ Runtime Library on my PC (Windows Vista) running reports error and refuses to open PDFs on the internet.

    Are there ways I can get assistance on this issue?

    I bought my PC in United Kingdom 3 years back.

    Best regards

    Jógvan Hansen

    Hello

    Perform the steps suggested by Fixer Upper2 from the link below and see if it helps.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/Microsoft-Visual-c-runtime-library-error-opening/e54c0106-DDA4-4105-8030-229335750f2d

    Hope this information helps.

  • Device Manager remotely using Compmgmt.msc Cannot Connect to Vista Edition family of XP

    Whenever I run (compmgmt.msc) computer management I connect the remote computer to Vista Home.  I connect successfully to him but whenever I select the Device Manager it says: "cannot access the computer 'Computer name'." "Or whenever I select the folder to share, I get" error 5: access is denied. " "What seems to be the problem?

    Hello

    Sorry, when I saw the 'I' connect I does not pay attention to the expression "Vista Home".

    The Home of Windows versions may not act as a host to remote control.

    You must upgrade to a version of Windows Pro/Ultimate/Enterprise.

    Or use this, http://www.teamviewer.com/index.aspx

    Or, http://www.uvnc.com/

    Both are free for personal use.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • After upgrading to LR CC 2015.5 and Photoshop 2015.1.2 LR refuses to open Photoshop CC 2015 as external editor. Instead, it opens a previously installed Photoshop CS 6. How can I fix it?

    After upgrading to LR CC 2015.5 and Photoshop 2015.1.2 LR refuses to open Photoshop CC 2015 as external editor. Instead, it opens a previously installed Photoshop CS 6. How can I fix it?

    Please refer to Edit in Photoshop no longer works in Lightroom and let us know if this helps.

    ~ Assani

  • 6.3 Lightroom refuses to open after an automatic update Windows 10 Pro

    My computer refuses to open Lightroom 6.3 after my software has been updated automatically by SM.  When I try to open Lightroom, I get a message dialog informing me that Lightroom has been checking the integrity of the Lightroom Catalog.  After 20 seconds of audit, the dialog box disappears and the Lightroom program does not open.

    When this error occurred initially, after the automatic updates of Windows Pro 10, I tried to fix the problem with Lightroom 6.2.1 opting for Lightroom 6.3.  After the Lightroom 6.3 upgrade, I am unable to open my Lightroom program and edit images.

    Hi Robert_Crawford,

    Could you please check the event viewer and let me know for the path of the defective module.

    How to check the event viewer: Photoshop Elements Editor Help. How to find the crash logs on to Windows

    Kind regards

    Tanuj

  • Hello, need help for Adobe Reader DC playing animation files that are specified in the pdf output by script Latex Beamer. My Adobe Reader DC refuse to open any format that I gave him.  Thank you very much

    Hello, need help for Adobe Reader DC playing animation files that are specified in the pdf output by script Latex Beamer. My Adobe Reader DC refuse to open any format that I gave him.  Thank you very much

    Hey ihorl18351266,

    Please note that you can open PDF files using only the CD player. Any other format will not be supported by the software.

    Kind regards

    Ana Maria

Maybe you are looking for

  • HP Deskjet Pro 8600: Vertical streaks on black background copy only

    My printer has black vertical stripes on copies. Color copies are very good, black print is fine. Streaks be copies of black ink. I changed the ink cartridge, but it did not help.

  • How to delete video messages?

    I have video messages (sent and received before) on the page. Would like to know how to remove them, if possible. Can anyone help? Thank you very much!

  • How to get the peak value

    Can I know how to get the 2 peak values v1 and v2 and 2 duration times t1 t2. Since there is a small amplitude noise, difficult to use the Max simplely. May need to use a filter such as wavelets or TREE to Denoise it first. Can I know how to use, any

  • Somehow changed the color of my screen, cannot be found to restore.

    Original title: colors I have somehow changed the colors on my screen, I found where I can change the color of the letters somehow as well as the color of window boxes. now I can't find where I went

  • Whenever I type in the search, the links go to the wrong page

    original title: problem with search When I type in my search, the list of items of fine search. When I click on one of the points of view it starts to load and then is redirected to another site like revo, puree of information or another site of sale