My monitor only would light up by turning on the laptop

Similar Questions

• How can I turn off the laptop after restoring it to factory settings?

  Hello everyone

  I'm selling my Portege R830-10 q If I want to restore it to the settings to factory (out-of-box state) AND THEN TURN IT OFF.

  I brought the laptop to factory settings successfully using the _TOSHIBA recovery Wizard_ and choosing * factory default software recovery (Recover State out-of-box) *. However, at the end of the process of recovery and after everything is back in place I was not able to TURN off the POWER to the laptop. It only gave me the option to restart. After rephrasing it, the Windows installation process starts.

  I don't want to install Windows, i.e. language, keyboard, user account, etc. I want to leave the Windows installation for the person buying the laptop to me. How can I turn off the laptop after the recovery of the system without having to install Windows?

  I would appreciate your help.

  Concerning

  Pedro

  When the recovery process is complete and you are prompted for a reboot just press start button / stop and turn it off. I think it's only thing you can do.

  Anyway, why not start Windows and go through the configuration option. New owner can modify this basic anyway parameters. As username Admin and language and the keyboard can be set as default.

  For example, if you have a picture of German recovery set to German. New owner can change in any case.

• Just after I turn on the laptop (before that turns on Vista) I get "cannot open volume for direct access.

  Just after I turn on the laptop (before Windows Vista turns on) the following message appears "cannot open volume for direct access.  What this mean and how can it be solved?

  Thank you

  Eddie

  Hi EddieLopezA,

  ·         Which version of Windows Vista is installed on your computer?

  ·         You have antivirus software on your computer?

  This problem may occur if another utility or service, for example a virus check program or a program disk monitoring, locked the partition before you try to run the Chkdsk.exe or Autochk.exe utility.

  I have some steps that may help you.

  Method 1: I suggest you to turn off all third-party applications and check if you have a similar question.

  To do this, follow these steps:

  1. open the start search box, type services.msc and click OK.

  2. in the Services (Local) list scroll the service concerned (for example auditor of virus or disk monitoring tool).

  3. right click on the service and select Properties.

  4. change the startup type to disabled for all applications 3rd - party that could be the cause of the blocking of Chkdsk problem.

  5. click OK/apply.

  6. restart the computer.

  Method 2: If this does not help, try to change the registry value and restart the computer.

  1. click on the start search box, type regedit.

  2. in the Publisher of the registry under the HKEY_LOCAL_MACHINE subtree, go to the following subkey:

  \SYSTEM\CurrentControlSet\Control\Session manager

  3 change the Boot entry run of:

  autocheck autochk * /r\DosDevice\C: (or other)

  TO:

  autocheck autochk *.

  Note: Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.  If you want to edit the registry to fix this I urge you to back up your registry before proceeding.

  Links for:

  Unable to run CHKDSK

  http://support.Microsoft.com/kb/555484 (also applies to Vista)

  Hope the helps of information.

• Two minutes after I turned on the laptop Vista freezes

  My Vista freezes about 2 minutes after I turned on the laptop. Then it does not allow me to do something, so I have to cut the current, do not use the close option. I don't know if it is a common problem in Vista or if it's just my laptop.

  Download or leave the laptop on for a very long time will help this problem?

  Thank you.

  Hello

  Usually, the OS should no freezes but sometimes if the temperature of the laptop is high it can happen that the laptop will not answer. Sometimes some installed 3rd party applications could have a bad influence and can cause freezing.

  I recommend reinstall the Vista from the Toshiba restore CD.
  If the laptop freezes still after the new installation you must contact the technician of the laptop of the ASP in your country.

  Good bye

• Internet connection drops when I turn on the laptop

  I use a computer laptop dv7-7250us HP Envy, running windows 8.1.  All my software is up-to-date.  In the last month, everytime I turn on the laptop, the internet connection drops.  Troubleshooting of HP operation resets the wifi adapter.  It's boring run the troubleshooter in the mornings.  Any suggestions on what I can to prevent that from happening.

  I have Intel Centrino Wireless - N installed 2230.  I went out to the Intel Web site and most recent driver.

  Hello

  I rolled back the driver in Device Manager, and now I'm able to connect automatically when I turn on the laptop.  The driver that works has been dated to August 2013.  The Windows update in June for this caused driver wifi whenever I turned on the laptop.

• ProBook 4530 s: grinding noise near the vents when I turn on the laptop.

  Sometimes when I turn on the laptop, a loud grinding noise is heard from the left corner, near the vents.  I think that's probably the fan.  I turn off the laptop because it doesn't seem like grinding stops.  Then when I turn it on again, grinding noise disappeared.  The fan needs to be replaced, or when the fan needs to be replaced?  Is this easy to do?

  Alternatively, the problem could be something else?

  MContrary wrote:

  I see that there is a video on YouTube for laundry s my exact machine, HP ProBook 4530 fan.

  I guess I'll try to do that, but the noise I hear is very strong, as something very bad is grinding

  This could be the lack of fan or some a little debri is inside the unit that should not be there.

• When my computer is updated before stopping, my friend, turning off the laptop. Now, my laptop does not work. He said dose explore window does not. I can not open any program.

  When my computer is updated before stopping, my friend, turning off the laptop. Now, my laptop does not work. He said dose explore window does not. I can not open any program. What should I do? Please help me. Thank you

  Hi TaiNguyen95,

  ·         Have updates you installed?

  ·         What is the full error message?

  Follow the steps provided by Keith from the link.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

• While turning on the laptop its gives me a message "your pc will restart in two days for the installation of updates.

  About a week ago I just bought windows mobile 8 is installed. Now for the last two days while turning on the laptop its gives me a message "your pc will restart in two days for the installation of updates.

  To stop, I get three option 1) sleep 2) arrested update 3) and close

  What should I do?

  Original title: windows update issue 8.

  Hi Parichay,

  The updates that are being invited to install are automatic updates.

  The message you get is offered by Windows 8 after that updates are downloaded and installed.

  If you do not restart your computer soon, Windows will force a restart of your computer two days after that it has installed new updates to complete their installation.

  You must restart your computer at a convenient time for you, rather than wait two days and have it suddenly reboot maybe at an inopportune time.

  Hope that solves your problem.

• black screen when I turn on the laptop

  Last night's in trouble with the screen freezing... Help the power up to the stop button. Will not be stopped... The only thing it does is going to a black screen... However, I can move the cursor... Please help the laptop is a year old and not used all the time so its pretty new.

  Dear customer,

  Welcome to the Support Forum HP and we are happy to help you

  Looks like you are having a lot of difficulty getting on the Windows desktop, you get a white screen

  We will surely help you with this

  According to the message that you posted, I suspect that this could be due to the recent changes are applicable.

  I'd like to request you to perform the procedure to solve the problem below:

  Step 01. Turn off the computer

  Step 02. Turn on the PC and keep pressing the F8 key

  Step 03. Select "Safe Mode" in the early startup Option list

  Note: Wait until you get to the Windows desktop

  Step 05. Please remove unwanted startup items and uninstall unwanted applications

  Step 06. Please reboot / restart your PC normally

  Note: Incase if these steps don't work you can continue to troubleshoot the issue once again

  Step 01. Turn off the computer

  Step 02. Turn on the PC and keep pressing the F8 key

  Step 03. Select "Last known good configuration" in the list of the early start Option

  Note: Wait until you get to the Windows desktop

  Step 04. Please remove unwanted startup items and uninstall unwanted applications

  Step 05. Please reboot / restart your PC normally

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• Processor/fan continues to run even after turning off the laptop

  I'm using Inspiron 15 3542

  I've updated my OS to Windows 10, but sometimes will not stop the fan from the processor/even after discontinuation of the laptop (as well as the display goes off)! The fan continues and continues. And after this laptop won't turn on even! I have to open the battery, and then it lights up!

  I downloaded almost all the software required for my laptop dell for Windows 10 x 64 software download through bit.

  PS: I searched the forum google/checked, and the solution I found was to download Intel Management Engine. I did download and install it, but the problem seems to stay...

  Kindly help and thanks in advance!

  Sorry for the double post!

  Found a solution: https://www.dell.com/support/home/in/en/indhs1/Drivers/DriversDetails?driverId=NFY3D&fileId=3497768106&osCode=WT64A&productCode=inspiron-15-3542-laptop&languageCode=EN&categoryId=FW

  I have installed, be informed after several tests

• Computer laptop HP DV6-3019wm and HDMI to LCD TV output. Turn off the laptop computer screen?

  Hi all, when I connect my HP DV6-3019wm laptop to my LCD TV Via HDMI and watch a movie, or stream Netflix, etc.

  How to turn off the screen of the laptop, or close the lid on the laptop? Without arresting him. Is it possible to do it on the laptop, easy enough for watching movies on the TV, without spoiling all the other parameters? Parts perfect TV, but the picture is still on the laptop too, at the same time.

  Also, when windows 7 on the laptop has all these popups down in the lower right corner, windows updates, screensavers of updates, HP Advisor, Hp etc. This will affect the movie as it is being read? or do I have to cut this kind of things? It would be a pain if I had to turn off all, in order to avoid the film interrupted by a reminder that there are available windows updates.

  Thanks for any advice, help, etc.on this.

  Ok thank you. Fixed

• Satellite P300 - is - it normal that the buttons CD/DVD turns on the laptop?

  Hi all

  My laptop is Satellite P300 - PSPCCE. I noticed that if the laptop is off and press the CD/DVD function it turned on and play Windows media player.

  My question is - is this normal, and if this normal how to disable this option?

  Thank you

  Hello

  It's definitely normal. It's not on the new Satellite P300, but also on the old models of laptops with these buttons.
  To be honest I don't know that I don't know if you can turn it off. Either the buttons are in use or not, but, as far as I know, there is no option where you can disable this option to boot the laptop but then use buttons located under the operating system.

  I'll test it on my Satellite A300.

• When playing xbox live and someone turns on the laptop he loses the connection to the server and then resets modem

  when im playing left 4 dead 2 versus and kids turns to the top turn of the page to play counterstrike he says: interruption of the connection to the server and then resets my modem or router

  I had the Charter to come out, they ran the new line and I always have problem help me please

  Hello

  ·         What operating system do you use?

  Step 1:

  I suggest you to update the firmware of the router on the manufacturer's Web site and verify that it helps. For more information on how router update contact your router manufacturer's support site.

  Step 2:

  Try to assign the static IP address for an Xbox 360 and the laptop and check if it helps.

  To assign a static IP address for your laptop:

  one) click Start > Control Panel > network and Internet > network and sharing Center and click on change adapter settings.

  (b) select your network adapter. (if you have more than one list) Right-click on the adapter and choose 'Properties' from the list.

  (c) under "this connection uses the following items," click once on "Internet Protocol Version 4 (TCP/IPv4) to select it and then click on the button 'Properties'.

  (d) click the radio button for "use the following IP address:" enter the static IP address, you want to use in the IP address box.

  (e) press "Tab" when you are finished and that the "Subnet mask" value should automatically populate with the correct value.

  (f) Finally, you will need to enter the IP address of your default gateway and the IP addresses of your favorite servers and auxiliary DNS.

  (g) the default gateway is the IP address of your router. The DNS addresses are usually provided to you by your ISP.

  (h) click on 'OK' to save your changes, and then click 'OK' again on the local area network connection properties window. You have now assigned to your computer a static IP address in Windows

  To assign a static IP for Xbox:

  (a) turn on the console and press "Guide" on the controller to bring up the quick menu.

  (b) go to the 'Settings' tab, then open "System Settings." The dashboard opens and the 'System settings' menu.

  (c) select 'Network settings' in the menu new. Another list of menu options is displayed. Choose "Configure network." This opens the network configuration menu, where you can set a static IP address. Note your IP address, subnet mask and gateway.

  (d) change your settings 'IP' to 'Manual' instead of 'automatic '. This will allow you to manually select your IP address and other settings. It can also erase your current settings, that's why you need to write.

  (e) change the last three digits of the IP address. Enter the same numbers for the subnet mask and the gateway that you saved in step 3. Press 'B' to exit from the menu and save the changes

• Turn off the laptop lights?

  There are four outdoor lighting on the edge of my PC Toshiba laptop.  I think they mean, from left to right:

  1 is plugged in? OFF-no green-Yes

  2. the? OFF-no green-Yes

  3 battery (only if the loading), orange Green-good-needs to be charged (super useful if it only turns on when its loading)

  4. 'thought' is the computer to do stuff? OFF-No Yes Green Green flashing, not much

  How can I turn off these lights and I can?

  You can't turn them off, and it would be imprudent of Toshiba to include a feature that would allow of... :-)

• Monitor only 3 groups in VMWare and include the ESX and virtual machines that are running in this cluster

  Hi all

  I have two business units who want to have a view of their grouping. Create a dashboard for each cluster, or is there another way to approach this problem.

  See you soon

  Hi, I noticed that this thread has not been answered.

  I then there is, we copied the main dashboard VMware and selected a default service for her (Cluster/Datacenter).

  I hope this helps. Please try it first on a system of staging (lab).

  File has been attached.

  Gaston.