Computer laptop HP DV6-3019wm and HDMI to LCD TV output. Turn off the laptop computer screen?
Hi all, when I connect my HP DV6-3019wm laptop to my LCD TV Via HDMI and watch a movie, or stream Netflix, etc.
How to turn off the screen of the laptop, or close the lid on the laptop? Without arresting him. Is it possible to do it on the laptop, easy enough for watching movies on the TV, without spoiling all the other parameters? Parts perfect TV, but the picture is still on the laptop too, at the same time.
Also, when windows 7 on the laptop has all these popups down in the lower right corner, windows updates, screensavers of updates, HP Advisor, Hp etc. This will affect the movie as it is being read? or do I have to cut this kind of things? It would be a pain if I had to turn off all, in order to avoid the film interrupted by a reminder that there are available windows updates.
Thanks for any advice, help, etc.on this.
Ok thank you. Fixed
Tags: Notebooks
Similar Questions
-
Problem turn off the PC and reboot
HI, I ve a laptop Toshiba Satellite Pro M30 with Windows XP PRO and every time I restart or turn off the PC, a window pops up saying: "end program-sample, this program is not responding" and every time I have to click "end now" If someone could help me I will be very grateful. Thank you very much and sorry for my english.my email address is [email protected]
Hello
I found an ad on the same question:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=5892&MessageID=20224This happens if some different applications in the background and can not be disabled. In my opinion, you should check the background process and stop it manually.
-
Light (switch) on my screen does not turn off. So, I shut down my computer and restart several times a day, because when I put it in mode 'sleep', he wakes to the top in a few minutes and will not fall asleep. I could put a blanket on my screen when not in use, but I'd rather find a way to make it stay asleep when I tell him.
Light (switch) had already done once before and I was so worried that once I turned off the monitor that I would never get it new on... a bit short of money here, to buy a new monitor, but the next day, I pressed the power button with an additional downward pressure and I could so he could start working again (able to turn the market monitor). It was about 3 weeks ago. Now, the light stays green, unless I stop the whole computer.
Maybe my main problem is sleep mode, which removes the screen for like 2 minutes and then he wakes up to the top and is so rude when I myself and try to sleep, I just turn off the monitor everytime I put the computer to sleep.
Now, I can't turn off the monitor, except by turning off the computer.
Hi JDandGinger,
I suggest you follow the provided article and check if it helps.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-power-problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems
If the problem still persists contact the manufacturer of the monitor for more help and information.
-
Turn off the xbox 360 causes internet to file on computer
OK, so it happened for some time. Whenever I turn off my xbox 360 it causes internet on my desktop and laptops to be cut for about 2 minutes. Everthing is connected wireless and there is no problem when everything is turned on and connected. Just when I turn off the xbox.
Hello
Since the question is originally due to the Xbox.
I suggest you contact Xbox support forums to get help:
Welcome to the Xbox support
http://forums.Xbox.com/xbox_forums/xbox_support/default.aspx
Hope this information helps. Response with status so that we can help you.
-
Turn off the monitor and input block
Hello
I am trying to create simple VI that will turn off the monitor (or screen saver turns on) and entrance to block mouse and keyboard - user so won't be able to see the screen and do any action. I use system32.dll for this.
My problem is that when my VI turn off the monitor, user can enable it back by simply moving the mouse or using the keyboard, similarly as these devices are blocked (by the function BlockInput of System32.dll).
How can I do the ultimate freeze?
Attached VI is based on Danny_Funk 'disable the monitor.vi.
Dear bieneck,
This is a very interesting problem you have there. I was snooping around Microsoft technical support for a bit, and the only reasonably simple method, I found was running powercfg.exe from an elevated line comand. You can query wake programmable devices with powercfg - devicequery wake_programmable poster theand disable using "Your device name" powercfg - devicedisablewake. Here you can find a more detailed documentation.
Except that I have found no reliable method that will spare you excessive digging in the registry. Maybe some 3 rd party tool?
One more thing: If your goal is to prevent the user from interacting with anything, it would be easier to make up a large modal window that does not workaround? At least, it seems to me that it is much simpler to use a native Windows function that is not provided for this purpose.
Kind regards:
-
How can I turn off the shot of the gesture of my computer laptop windows 8?
I am trying to turn off the gesture on my new laptop computer shot and nobody seems to have an answer. I go online to find an answer but it gives me some information to copy and use, but it doesn't seem to work. Can someone PLEASE give me EXACT instructions step by step on how to disable these gestures? It's EXTREMELY annoying that, although I am a game or do anything at all that the charm bar opens or opens the last bar app! Don't know how long I can take this! Thank you
OK all you Sony Vaio users, you are absolutely right. There is no way to disable the gestures of the mouse settings. But... I figured out how to do without having to modify the registry. Go to your applications screen and click on the form "VAIO Control Center" y go "Keyboard and mouse", at the top of the list below, you'll see "Turn it / off touchpad" with a power slider. The right of the element is a button «Détails» Until it clicks. Who will open another box saying "Enable multi touch features" there you will see a selection of 'Show the charm' uncheck the box which, and you won't have to worry about those accidental shots again. YAY!
-
My computer operating system Mac Pro OS X EL Capitan 10.10.3, ink 13"early 2015 screen off for a few seconds and back on without turning off the unit.
This has happened several times, regardless of the period in which stays on.
Don't know what is happening with your publication details. You posted in space of the Macbook Pro forum & even your profile indicates: ' MacBook Pro (retina, 13-inch, early 2015), OS X Yosemite (10.10.3)..
Your post indicates you are using a Mac Pro, which is a desktop computer and with the help of El Capitan who is 10.11.2 not 10.10.3 which is Yosemite - 'my computer operating system Mac Pro OS X EL Capitan 10.10.3.
-
The date and time do not automatically change when I turn on the computer, it has recently been like that. I have change the settings manually and everything is ok until I turn on the computer the next day.
The date and time do not automatically change when I turn on the computer, it has recently been like that. I have change the settings manually and everything is ok until I turn on the computer the next day.
Change the battery on the motherboard.
http://www.computerhope.com/issues/ch000239.htm -
can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop
You define 'Action close lid' to the 'status quo' instead of sleep or Shut down:
Go to-> double click "Power Options" Control Panel-> 'Select a power plan' under your selected plan, click "Change plan settings"-> "Change plan", click on the blue link 'Change advanced power'-> in 'Advanced settings' tab expand "power buttons and lid"-> extend the action of the 'close' lid, set "on battery" and "Plugged in" to "Do nothing"-> click apply-> OK buttonMultiple monitors: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questionsSet up multiple monitors
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitorsMove windows between multiple monitors
http://Windows.Microsoft.com/en-us/Windows-Vista/move-Windows-between-multiple-monitorsUnderstanding multiple monitors
http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors -
I get a message telling me go download 1 update and do not unplug or turn off the computer.
I get a message not to unplug or turn off the computer until 1 update is complete. After 3 hours, the same message appears and nothing has been updated. WHA'ts the problem? Thanks-John
Please provide more information for your issue to be diagnosed.
Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.
Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.
Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.
To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.
For assistance OneDrive see paragraph 9.3:
-
When my computer is updated before stopping, my friend, turning off the laptop. Now, my laptop does not work. He said dose explore window does not. I can not open any program. What should I do? Please help me. Thank you
Hi TaiNguyen95,
· Have updates you installed?
· What is the full error message?
Follow the steps provided by Keith from the link.
-
It's not I the children side to turn off the computer at 23:00. They are not allowed to use the computer after that but it does not turn off as before.
Hello
1 did you changes to the computer before the show?
2. are you referring to Parental control?
Method 1: Read the following article and try to set the parental control again and see if that helps.
Control when children can use the computer:
http://Windows.Microsoft.com/en-us/Windows7/control-when-children-can-use-the-computer
You can also check:
Set up Parental controls:
http://Windows.Microsoft.com/en-us/Windows7/set-up-parental-controls
Method 2: Restore the computer to a date when it was working fine.
Reference:
System Restore: frequently asked questions:
http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
-
I want to activate Acrobat Pro 9 serial key and get message that are 2 active activations. We're old computer with problematic material and other is the same pc that I didn't turn off the license and reformatted. What should do?
I didn't know, I had to disable before turning back, but now I don't have this option. Is there a way to disable these two licenses and activate again the good?
Hi vasilisp36877173 ,
Please see these items:- Learn how to enable or disable Adobe applications
Solve the problems of activation and deactivation of Adobe and error messages
Let me know how it goes.
Kind regards
Christian
-
Acrobat 8 Professional does not work when trying to open .pdf documents. Repair instructions does not work. I use OS X El Captain on my mac. However, if I click on the tab to cancel the program request to make changes to the my computer and when I give permission to the program corrections and to open documents (also the work of program OK after the corrections are installed). However, when the computer is turned off, the corrections are not preserved and I have the same problems whenever I start. How can I get a download to make permanent fixes?
Post edited by: Alvin Strickland - Acrobat 8 Pro initiates changes automatically once I give permission for changes to the computer and does so in a few seconds, the document opens.
Hi alvins52918593 ,
Would like to inform that Acrobat 8 Pro is not compatible with this version of MAC OS.
Please see this KB article for version requirement older:- Tech specs | Adobe Acrobat Pro XI
Kind regards
Christian
-
I replaced my hard drive and format my computer before turning off the software PS. It need my code series now, but I had lost.
How can I solve the problem and use the software again?
If you use a perpetual Photoshop and formatted your disc version of starting without disabling your activation of Photoshop, you also Adobe supports help you activate Photoshop once you retrieve your serial number. The startup disk formatting would destroy that credential of Activation Photoshop machine which is registered in the database of the Adobe activation server. Which reduces the activation numbers you have to use. If you have Photoshop installed on a second computer that means that you have no free activation available as well, even with your key you can't activated the machine.
Maybe you are looking for
-
For you the tab missing on iPhone
Apple music phone app displays only the tabs of my music, playlists, radio and connection. Where 'you' & 'new' go? They always have on iPad app
-
Toshiba Service Netherlands; dissatisfied consumers! Satellite C70D-A-114
Dear users, My 8 week old * laptop Satellite C70D-A-114 * (purchased January 14, 2014) is down for the second time.It is still the HARD drive which gave, as well as a broken cd tray. Currently, the situation is that Toshiba blames me for inflicting d
-
iPhoto/photos in iphoto, but not imported from the HDD to the library
Hello I chose and took some pictures of files in an external hard drive and copied manually in iphoto. It seems that the pictures were not actually copied to the iphoto library. If I locate the disk we see on my hard drive. That's why when I eject th
-
How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?
-
MG6220 printer must be physically connected to the router to operate wireless?
Is the need for printer wireless MG6220 be physlically connected to a router to access wireless?