My monitot has a red tint

Similar Questions

• Dell S2340Mc monitor has a red tint and lines to travel to the top of the screen

  I have a Dell Latitude E6430 with Windows 7 Enterprise 64-bit with SP1 docked to a Dell docking station. I have two Dell S2340Mc IPS monitors - both are at a resolution of 1920 x 1080 as recommended by Windows. The problem started this morning.

  The monitor is 10 months old and has developed a reddish hue with lines travelling to the top of the screen makes it difficult to see anything. I tried using another cable DVI, a different port on the docking station, as well as VGA cable. I also updated the drivers and put my other Dell Monitor (identical) to be the main monitor-no difference. My other Dell Monitor (identical) is very well...

  I also did a factory reset and run the LCD function - this conditioning Panel is shot.

  The monitor model =, short publication line pattern description
  Body =
  * What is the serial number of 20-digit alphanumeric monitor? CN - 0293M 3-64180 - 33U - 1U3T
  * What is the revision number (A00, A01, etc.)? A00
  * What specific model of computer, desktop/laptop? DELL LATITUDE E6430
  * What operating system? WINDOWS 7 ENTERPRISE 64 bit WITH SP1
  * Which video card? DOCKING STATION VIDEO CARD
  * Which ports are available for the video card? 2 2 HDMI, 1 HARBOUR VGA AND DVI
  * Which video output from the video card port video on the port monitor do you use? DVI TO DVI
  * What cable are you using to set the video card to the monitor? DVI CABLE
  * Press the Menu button of the monitor to open the OSD (On Screen Display). The bottom of the screen should display a resolution. The resolution must match the monitor'S default resolution-IT
  * Brief description of the problem monitor? THE TINT REDDISH WITH LINES TRAVELLING TO THE TOP OF THE SCREEN

  You see problems when you run the SUBMISSION (built-in Diagnostics), pages 25-26? If so,.
  * Back to the top of this Forum to monitor
  Open the monitor "FAQ".
  * Open "monitor and safety guarantees.

• Computer has a red tint

  My computer turns off on its own, and when I restarted, everything is red. Help, please!

  Well looks like your monitor is at fault. Replace it with also see if there is any interference to any device which is close to the screen. Also, make sure that your monitor cables are connected correctly. Load the default color profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/color-management-settings-frequently-asked-questions

  If this post answers your question, click mark as answer .

• Flags of HP touchsmart 23 all in a desktop monitor has a slight tint of red on the left

  I have a HP Pavillion 23 touchsmart all-in-one desktop pc running windows 8.1. My touch screen started showing a slight red tinge on the left side of the screen. The rest of the screen normally shows. I have no idea what may be causing it. I tried to adjust the resolution and colors. I have also checked the power connection and update the video drivers. I am at a loss for what is the cause.

  Hello @Bree0037,

  I understand that your HP Pavilion TouchSmart 23 all-in-One desktop PC has a red tint on the left side of it and looking for assistance. The problem you describe seems to be a physical problem. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.
  
  I want to thank you for display on the HP Forums. Have a great day!

• Satellite L15 the screen has a red/pink tint

  When I turn on my toshiba Satellite L15 the screen has a red/pink tint and then 2 minutes later it is fine until the next time I turn on the computer it's screen it self or the inverter?

  Hello

  Not easy to tell if it s screen or FL inverter question.
  FL Inverter control the backlight of the screen and usually if the FL inverter start problems, then you can see photos on the screen as behind a thick fog.
  Then maybe he problem s screen but that's just a guess.

  However, FL inverter is not very expensive, but the laptop screen is one of the expensive laptop parts so I m not sure if it is s to replace the screen and pay 200-300 Euros for the fix

• Red tint at startup

  Hello

  I have a laptop Dell Studio 1535 running Windows 7 and recently the screen briefly shows a red tint on the move, when I switch to a new account user, or when I stop my black screen saver. In fact, where the entire screen is black, there a red hue when the desktop appears. It will last only a few seconds and the screen normally without any shade.

  A few weeks before, the screen seemed "flicker" or "shake" slightly - it does not distort the text on screen, but the light was not constant.  In addition, the left side of the screen was slightly darker than the right. It would stay like this all day and regardless of my change the brightness of the screen. The "flicker" was more apparent when I lowered the brightness of the screen. I thought maybe it was due to a bad converter so I replaced it myself, but the issue has not been resolved. Then a few days ago I noticed a slight tint of red on the lower left of the screen. I rebooted the computer and the whole screen was red tint to the Dell start page.  After that I would like to connect to Windows, the screen would change to its normal color. "Twinkle" has disappeared, but now, the hue is there every time I have spend an all black screen to normal screen.

  The hue does not appear when I go into the BIOS and I finished the BIST test. Every thing looks normal during the test, except when the screen turned white after having been black - even once the red hue appeared. However, when white appeared later in the test, there is no red hue, although it seemed a bit yellow (unless it was just a visual illusion to watch the test so closely). There are no scratches, blur, and the tint is not constant.

  I don't have an external monitor to do additional tests.  I made sure I have the latest video drivers. Do I need a new view or maybe a graphics card? Of the forum search, I did find a possible answer to this question.

  I appreciate help with this.

  It is interesting to borrow an external monitor or take the system in a store that allows you to test with a.  The sound of it, the backlight is what is a failure - which means that you will need a new Billboard.  However, check with an external display - if OK status, then it is the backlight.  If this isn't the case, you will need to replace the motherboard.

• Portege M600 - Volume icon has a red cross on it

  Hi all

  I need help to fix my laptop card. My laptop (TOSHIBA M600 on windows vista) basic as its original operating system works perfectly for the last 3 years. About 3 weeks ago the the volume icon in the lower right corner of the screen had a red cross on it. I am no longer able to listen to the lectures online, music, videos, etc. I opened the Device Manager and found no distinction between the like audio, video and game controllers. This happened after my friend installed a fake windows 7. Since then, I decided to buy and re-installed a professional legal window 7, but the problem persists. The volume at the bottom of the screen icon still has a red x on it.

  Kind people out there please help me... i'm a student and can't afford it which will be fixed by these expensive computer genius in the computer store. Also... If please use simple English lay when you give instructions or help.

  Thank you very much in advance
  Noelu

  Hey Buddy,

  Usually this mode Red Cross that there is no audio driver not installed or pilot is confusing until you already tried reinstalling the audio driver?

  What sound card you have installed?
  Normally, you can get all the drivers on the official website of Toshiba, but for an older model like yours, I guess to check the other pages. For example, if you have a sound card Realtek, check the Realtek page directly: www.realtek.com

• HP OfficeJet printericon 8600: 8600 to dock has a red circle with a 1 in it

  My 8600 works very well, but in the dock icon has a red circle with a 1 in it. This is what and how do I get rid of him?

  Hey @nancybl,

  I see you have some problems with a document pending on your computer Mac OSX 10.11. I can help you to compensation only.

  Here's how to clear that:

  1. If the printer is connected to the Mac through a USB cable, remove it.
  2. Click the icon of your Apple preferences system, printers and Scanners.
  3. Hold down the CTRL key and click the icon of your printer on the left.
  4. Click on reset printing system.

  Now, if you removed the USB cable, plug it. Otherwise:

  1. Click on the button "+" at the bottom left.
  2. Select your printer from the list.
  3. Click the check box next to and select your printer from the list.
  4. Click on Add.

  Please let me know the results of the rest of the foregoing. If it clears the error, click on accept solution. If you like my assistance, please click on the thumbs up icon. The two icons are below this post.

• MEU computador esta conectado several redes, o FACO pra ficar so has minha rede privada?

  MEU computador esta conectado na rede domestica, mas esta conectado also has uma rede publica, e isto tem feito as minha internet nao functions. O that FACO? Quando EU a desativo rede publica a minha internet watch a useful um local nao works so a conexao sem fio. O than FACO pra nao ter esta rede Pública me atrapalhando?

  Inappropriate feedback >

  Hello

  You asked your question in the text of the Microsoft Community. Please you would click on the 'Change Region' button down to the left of the screen and select your preferred language. Now ask you question once again.

  Thank you.

  Translation of Bing above:

  OLA

  Voce question seu na versão Inglês do Microsoft Community. Por favor, no "Mudanca region" automatica no canto inferior esquerdo da tela, em seguida, selecione seu idioma preferido clique as voce. Agora pergunte voce question again.

  Obrigado

• bad intalada the connection has the Red

  bad intalada the connection has the Red

  Hola, Shupak,
  El of Han published in Foro Español of responses from Microsoft. Haga click in the flecha desplegable junto did you display number (superior derecha) y select knew preferencia idioma. O well, enlace haga click abajo el El para Foro Español donde can volver a su announced consulta.
  http://answers.Microsoft.com/es-ES/feedback/forum?tab=unanswered
  ¡Buena suerte!
   
   
  Hello, Shupak,
  You have posted to the Microsoft Answers Forum.  Click the drop-down arrow next to your screen (top-right) and select the language of your choice.  Or, click the link below to be taken on the Spanish Forum where you can republish your query.
  http://answers.Microsoft.com/es-ES/feedback/forum?tab=unanswered
  Good luck!

• My photos have a pink/red tint to them in the print pictures window

  The color of my photos in the window "Print photos" is NOT the same, as they appear in the screen of Windows Live Photo Gallery change. They have a pink/red tint to them in the print pictures window. How can I fix it? He always did, I don't know how and why it started doing this. I tried everything to fix. Nothing works.

  Hello

  When you use Windows live Photo Gallery and the question you have posted is about the same, so it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

  http://windowslivehelp.com/product.aspx?ProductID=20

• I have a View Sonic LCD 24 inch flat screen and it has a blue tint, how can I solve this problem?

  I have a View Sonic LCD 24 inch flat screen and it has a blue tint, how can I solve this problem?

  Hello

  He got this 1 day, or has it just begun?

  If it was always this way, it could be a manufacturing defect or your advanced display settings may be incorrect. The latter can be determined according to the settings/Advanced/display/personalization in the control panel settings. See Customization here, it varies depending on the manufacturer, but you focus on controls that adjust color output.

  If it has started, then it is possible the monitor had a malfunction. I put another monitor (if available) on the system. If the problem persists, then the fault is in the video card or display drivers. If it disappears, then the monitor can go wrong (you can try to adjust the settings on the screen itself to see if it has no effect). If it turns out to be the graphics card, I would like to firstly download and install a new set of drivers for the graphics card or the manufacturer of the system (the best for download, then uninstall the current set restart and install the new download).

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Windows 7 boot logo is displayed in strange colors, printing of the bios is blurry and has a yellow tint

  I have been using Windows 7 on my desktop since mid-January of this year, first beta, then RC1 and now install Windows 7 Professional. I had not encountered this problem in one of my previous installations.

  Arriving at the "windows startup screen" the animated windows logo appears in an odd arrangement of green and purple hues. Windows itself seems to have no real color problem arriving at the login screen. What is more strange is that mother Foxconn BIOS for my card start page now displays the text extremely blurry and has a yellowish tint on the edges of the letters.

  Video card drivers reach this somehow similar? Or is it just something funny with my installation of Windows?

  Edit: I apologize if this is the wrong forum, couldn't really find anything specific enough for this. Thank you!

  Thank you to have moved. And you're right, this isn't windows, just a coincidence with the time of installation. I don't know what happened, but now everything is wobbly. I was getting a black and purple theme by entering in my bios instead of blue and yellow.

• Red tint when printing from Photoshop to Canon IP7250

  I have the same problem when I try and print to one of my canon printers.  I have Canon ip7250 and MG650 of Canon.

  The prints came out without any black and the image had a red tinted layer.  On the preview, the image looked OK and black look black.

  I changed between photoshop manage colors and the printer manage colors and then the red tint disappeared, however black was then with rays.  I experimented with different printing options and 7200 series PT1 works correctly.  I went back to print another using the same settings and the red hue appeared again.

  How to print correctly if the impression is identical to the image on the screen.

  I have a MAC with the latest operating system.

  Hi dannyboy888,

  Could if it you please let me know the version of Photoshop you're working on?

  Also could you please try to print from other applications outside of Photoshop with the same settings.

  Red displays on all images, or individual?

  Also, please make sure that the printer drivers are up to date.

  Kind regards

  Tanuj

• is lying.  The photo immediately becomes a red tint and I can't make adjust them

  I have photo open in PS.  I create alpha channels.  I go back to the layers and add the curves adjustment.  the entire photo becomes red tinted and I can't create the setting.  Is there a setting I need to adjust or y at - it something wrong?

  The screenshot above shows that the adjustment layer is still there and not deleted.

  Please male sure that hide you or remove the adjustment layer and see if you get the original image back.

  ~ Rohit