Portege M600 - Volume icon has a red cross on it

Similar Questions

• My volume icon has disappeard

  I have windows Home Premium and my volume icon has disappeard from the lower bar, so I can't control the volume. How can I recover it and why is this going.

  Hi ROYBORG,

  Remember to make changes to the computer before this problem?

  Step 1: Check if the Volume icon is hidden

  (a) right click on the taskbar > Hit properties > select Notification area tab

  (b) under the system icons > Select volume (put a check mark against) checkbox

  (c) click on apply and ok

  Check whether the problem is resolved

  Step 2: You can run the fixit available in the article below, which deals with a similar question

  System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer

  http://support.Microsoft.com/kb/945011/en-us

  
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My internet works, but the signal icon has a red x with no bar?

  Internet works as usual and has a connection, but this cross is still there I just reset and grows poorly does not have problem found... looking online it's drivers? but people have had problems to login again once the uninstallation of a pilot. I did nothing else or nothing installed nine minutes late was next to the Red Cross... help as its starts to be annoying. I took some screenshots of it 2 :) Thank you

  This indicates that your firewall such as Norton or McAffee is too strong and blocking the connection detection system.  Basically, the icon he's trying to ping on several sites (sites of Microsoft) to see whether or not a connection works and then displays the corresponding icon.  If the connection cannot ping this test site, then he puts the X icon, even if the connection is otherwise working.

  You can ignore it, or solve problems to get rid of other programs such as Norton or McAffee.

• the window of my wifi has a red cross on it, but it is running

  I just upgraded my pc & a red x's over wifi window in the taskbar

  Hello Carldunn,

  Thanks for your post. What operating system do you use?

  In the meantime, try the following steps:

  Click 'Start' > right click on 'Computer' > select 'manage '.

  Select Device Manager"in the upper left corner.

  Expand "network adapters."

  Underneath, you should see your network cards.

  Right-click your wireless adapter and ensure that it is enabled.

  Please let us know if it did or did not help to solve your problem.

  See you soon

• WiFi 802 1704 1.1... is not work after activation of the window of udating to 8.1, but showing an icon of a red cross on the icon of the adopter. When troubleshoted showed that the wifi compatibility is turned off

  What should do?

  ali_ahsan,

  To activate the wifi you press F2 or FN + F2. You can also go to the mobility Center in Control Panel to turn on the wifi as well.

• My creative cloud does not.  Icon has a red triangle and no apps or typekit show

  This happened this morning after I had turned off my mac for 24 hours.  All I see is a white, empty place, no apps, no connection.   Internet connection is solid.  Hope someone could enlighten us.

  Hi Pillekes,

  I share a few discussions with you, where users facing the same problem and it was fixed:

  New application Cloud Creative unusable: it is empty!

  Creative cloud is empty window why?

  Creative cloud Packager white screen after the Adobe ID Login

  Hope this will help you.

  Kind regards

  Megha Rawat

• the Red Cross near volume icon - peripheral output Audio n is installed

  For some reason the last 2 days, my volume icon has a red x on it and says "no audio output device is available".

  The sound works for error messages, but nothing like itunes or youtube does not work

  And no it's not on mute, its got an error-type-cross, not the diagonol red line

  What should I do? I do not use speakers or headphones, it's literally just the speakers on my laptop that I use

  Thanks in advance to anyone who can help me :)

  Hello

  The sound card is recognized correctly in the Device Manager?
  This sounds to me like an audio driver problem.

  Try to remove the sound card in Device Manager and reboot the device.
  Wait for the windows operating system has recognized the sound card again and try again.

  If this will not help-> reinstall the audio driver.

  In most cases, it helps...

• RED CROSS ON NETWORK CONNECTION SYMBOL

  even though I am connected to my modem network connection symbol has a red cross on it. How should I set it... ??

  Hello
  Thank you for writing to Microsoft Communities.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. what type of connection you are using? Is - this wired / wireless?
  2. don't you make changes to the computer before the show?

  Method 1
  Run the network troubleshooter to diagnose and repair any problem related to your network. The below mentioned link to get the access procedure:
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2

  Temporarily disable the security software and check if it helps.
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3
  Remove all the wireless networks, listed in the network and sharing Center.
  a. click Start and select Control Panel.
  b. open the network and sharing Center.
  c. click manage wireless networks.
  d. remove all wireless network listed in this list.
  e. restart computer.
  Select your wireless network and connect (if course, enter your password). Check if you see yellow color exclamation on Wi - Fi bar resistance.

  For a complete list of the steps to try, see the tutorial wired and wireless on this page.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  For your reference:
  After you wake up, a Windows Vista-based computer or a Windows 7 sleep mode or Hibernate computer, the network icon and the speaker in the notification area icon do not show the correct state
  http://support.Microsoft.com/kb/937477

  Hope the helps of information. If you need help, please reply. We will be happy to help you.

• HP OfficeJet printericon 8600: 8600 to dock has a red circle with a 1 in it

  My 8600 works very well, but in the dock icon has a red circle with a 1 in it. This is what and how do I get rid of him?

  Hey @nancybl,

  I see you have some problems with a document pending on your computer Mac OSX 10.11. I can help you to compensation only.

  Here's how to clear that:

  1. If the printer is connected to the Mac through a USB cable, remove it.
  2. Click the icon of your Apple preferences system, printers and Scanners.
  3. Hold down the CTRL key and click the icon of your printer on the left.
  4. Click on reset printing system.

  Now, if you removed the USB cable, plug it. Otherwise:

  1. Click on the button "+" at the bottom left.
  2. Select your printer from the list.
  3. Click the check box next to and select your printer from the list.
  4. Click on Add.

  Please let me know the results of the rest of the foregoing. If it clears the error, click on accept solution. If you like my assistance, please click on the thumbs up icon. The two icons are below this post.

• Satellite L300 Wireless icon has the Cross Red but connected - SOLUTION

  Satellite L300. Home Premium Windows 7 32.

  Updated the wireless driver Atheros to the download area of Toshiba (the newest driver released on 11/27/11). After the reboot, the icon in the notification area wireless shows with red cross through it even if it is connected. Not a big deal but annoying.

  Corrected by:
  (Note: you must take note of your routers WEP key before doing this and if SSID is not it broadcasts)

  1. go on the network and sharing Center
  2. click on manage networks wireless on the left-hand menu
  3. highlight your connection and remove it.
  4. stop and restart the network connections service (to go to the Services console right-click on computer in the start menu and click on manage.) Expand Services and Applications, click Services).
  5. reconnect to your network by choosing from the list of available and entering the WEP key (or use him manually add... option if you must enter the SSID).
  6. If still the same then restart and reconnect to your network.

  Worked for me.

  Alternatively you can try of course to roll back to the old driver.

  Thank you much for sharing this info with us!
  Perhaps, it might be useful to other people here in the forum!

  Great post!

• There is the Red Cross in the icon network and cannot connect to the internet, to detect any wireless network.

  * Original title: Internet connection problem

  It has red cross standing in the network icon and I can't connect to internet via USB modem or WiFi. It is also not detect any wireless network.

  Aalishan salvation,

  -Have there been recent changes made on the computer before the show?

  This problem can result from network card or driver settings.

  I will only refer to the suggestions provided by Gokul T on May 14, 2010 and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-is-unable-to-detect-any-wireless/9a7386ba-7775-4039-940b-20fa537c6084

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, see the links.

  Why can't I find a wireless network?

  Wireless and wired network problems

  Keep us informed on the status of the issue.

• Volume shortcut icon has disappeared from the Vista tray

  Volume shortcut icon has disappeared from my status bar at the bottom of the screen... How do I get it back?
  Seems silly, but I can't find it!

  Hello

  Have you checked the settings in the taskbar and Start Menu Properties?
  There should be a tab named Notification area.

  In this tab, you find an option; Hide inactive icons.
  You can turn off (disable) this device or you can customize it.
  In addition, you can choose which icons should be available and shows even the Hide inactive icons option would be activated.

  In some cases, these options may be grayed out
  In this case, you will need to find a registry key:
  HKEY_CURRENT_USER Settings\Software\Microsoft\Windows\CurrentVersion \TrayNotify

  and here you have to delete the keys: + IconStreams + and + PastIconStream +.

• Satellite L500 - 19 X - Red Cross on WLAN icon

  Anyone know why I always a red cross on the icon of the taskbar wireless although my wireless connection is well?

  I have a Satellite L500 - 19 X.

  Hey,.

  This means that Windows indicates that you have WLAN connection, but you are still connected via a WLAN card?
  Well, that s really strange.

  But to make it clearer: what OS do you have?

• Sometime this week, my MacBook Pro has lost its sound. I can't listen to anything that has the sound of iTunes for video clips. It is no longer a Volume icon (speaker w / lines of radiation) on my Menu bar

  Sometime this week, my MacBook Pro has lost its sound. I can't listen to anything that has the sound of iTunes for video clips. It is no longer a Volume icon (speaker w / lines of radiation) on my Menu bar. My MacBook Pro is a mid-2012, 2.3 GHz Intel Core i7 Memory 16 GB 1600 MHz DDR3 OS X Version Yosemite 10.10.5

  Graphics Intel HD 4000. Can anyone help?

  Thank you very much!

  Thai-Anh

  Reset NVRAM may solve it.

  How to reset the NVRAM on your Mac - Apple Support

  Or system preferences > sound, check on 'Volume to see the menu bar' to show the volume of the sound in the menu bar.

• Windows XP volume icon is missing "volume control program has not been system."

  I can't activate the Volume icon by doing this it says in part: "volume control program has not been installed.    There is no way to install programs to add and I don't have a XP installation CD.  Apparently the following file is missing: Sndvol32.exe

  How can I "fix" this problem without a Windows XP installation CD?

  Thank you!

  Herb Hoke

  E-mail address is removed from the privacy *.

  Hello

  -Did you change on your computer before the show?

  Execute the method 1 of this article and check if it helps.

  http://support.Microsoft.com/kb/319095

  If you do not have access to from the Windows XP CD that contains the installation files, ask the network administrator for help if the computer is at your workplace, or contact Support. To contact Microsoft Support, visit the Microsoft Web site at the following address:

  http://support.Microsoft.com/contactus/