my network drive doesn't work what can I do to fix
He said the network drive is not available how can I fix this setting
Hello
1. have you made changes on the computer recently?
Follow the steps listed in the article below and check.
New drive or mapped network not available in Windows Explorer drive
http://support.Microsoft.com/kb/297694
I hope this helps.
Tags: Windows
Similar Questions
-
EA4500, network drive doesn't work without access to the secure folder
The map I try the USB hard drive connected to my EA4500 router as a network drive in Windows 7 and it works perfectly until I have enable access to files on the router.
After enabling file access secure and do not change other settings of the router I first disassemble the drive because it has been implemented without credentials and does that any more. When I try to remap the drive I use the same address, but select 'Connect using different credentials' when he invites me to the log in info I try to use the router administrator account, but it fails to connect. Diagnostics Windows network tells me that the device has refused the connection. I have to create an account on the router in the settings of folder with the same username and password that I use on my computer and tried to connect it without checking 'Connect using different credentials' (and them by manually typing if it matters) with the same results.
Even with secure file access enabled, I can still reach the reader very well by typing 'ftp://192.168.1.1/' in the file Explorer. It prompts me for a username and password, I put in the administrator credentials, and I'm in. The account, I created with the same name of user and password that my computer works this way.
After you turn off access to the secure folder as everything is working perfectly again... I'd rather do it with him, however.
Follow these instructions: http://homekb.cisco.com/Cisco2/ukp.aspx?pid=80&vw=1&articleid=25813
When you click the Browse button, that the router shows up when access to secure files is disabled, but not after it is activated. I've looked through my sharing settings windows and haven't noticed something that should cause problems, about that everything is allowed. I also tried disabling my firewall without success.
Well, that was weird...
I have reset the router, was able to operate with secure file sharing is enabled, but only, I could get a device connected to the player. I went in the USB storage on the router settings and started to get a bunch of error 2123 and 2118 s to the point that I was not yet able to change the settings. On the USB, I noticed a file named "." ftp_share.nfo"what is strange because it seemed sure whether a file instead of a folder in previous tests. I deleted the folder and all the errors disappeared, had haunted all my settings for the drive into the router, and now it works perfectly...
-
Well, I have a problem with adobe flash player, which had stopped working (I can't watch videoes on youtube). I learned that I can solve this problem by clicking on add-on Manager to control the program. but every time I try to open it start loading then I get the message firefox add-ons stopped working and needs to close. I close it and again click on Add-ons (options / general / manage add ons) is the same thing over and over again.
Hello, all first please try to update to the latest version Firefox (firefox 18.0.1) - you are using a very old version and insecure at the moment.
If this does not resolve the issue already, so maybe that files in your profile folder that store the information on your extensions could have been corrupted. Please go to firefox > help > troubleshooting information > profile - display folder... then windows Explorer should open your profile folder. there looking for files named extensions.ini, extensions.sqlite, extensions.sqlite - journal (and in some cases also extensions.txt, extensions.rdf). delete or rename the files and quit firefox, they will be regenerated the next time you start firefox.
See also https://support.mozilla.org/en-US/kb/Unable%20to%20install%20add-ons#w_co...
-
my hard drive does not work, I can not download my antivirous
my hard drive does not work, I can not download my antivirous
Here are a few articles with possible solutions and its fix for the hard drive problems. Maybe at least will help any problems you encounter. I could have provided more targeted recommendations if you had provided more information about what the problem is exactly, when he started, the manufacturer, make and model of drive, how the player does not work - is that it recognized by the system, it appears in Windows Explorerr, the door opens when you press the button... If the following text does not, provide this and more information about the problem and your configuration maybe we can provide additional assistance.
Compliments and thanks to the spirit of another thread:
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.microsoft.com/gp/cd_dvd_drive_problems - A Mr FixitCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsI hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I receive a notice at the beginning upward: AppleSyncNotifier does not work. What can I do to fix that? Thank you.
* original title - something at the start doesn't work well... *.
Hello
AppleSyncNotifier belongs to Apple iTunes, etc.
Uninstall/reinstall iTunes
Follow the information from apple to the links below
Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.Apple.com/kb/HT1923
____________________________________________________
Problem installing iTunes or QuickTime for Windows
http://support.Apple.com/kb/HT1926
____________________________________________________
or ask for their support of itunes
http://www.Apple.com/support/iTunes/
____________________________________________________
Also try the discussions of apple itunes
-
I have not been able to access the optional updates, discover my reports of parental control, change my options to account for children or add a new user in the month. Whenever I boot, I get "Explorer of widows stopped working" then it restarts. Its driving me crazy! What can I do to fix this?
Hello
Thank you for joining Microsoft Community!
Try the steps from the following link and check:
Important:
Ignore the topic upgrade in Place from the following link:
Error: Windows Explorer has stopped working
http://support.Microsoft.com/kb/2694911
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Hope the information is helpful; If the problem persists, or if you face issue of Windows in the future let us know.
We would be happy to help you! -
I get messages that support and problems Windows has stopped working. I told myself that I will advise if a solution is found, I get another box saying that I have to close becausse that Windows does not work. I also get messages that I have not more memory on line 2. What can I do to fix this?
Hello
1. could you give us the exact error message?
2. Once you get this error message? This is when using Internet Explorer?In the meantime, check out the articles below and check. Try to increase the size of pagefile.sys and check.
http://support.Microsoft.com/kb/2267427I hope this helps.
-
Launcher main exe stopped working so my logitech webcam does'nt work, what can I do?
My webcam logitech 170 does'nt works because Launcher main exe stopped working what can I do about it?
There are a number of discussions in Logitech forums at the topic "main Launcher" (not sure whether an any of them will be useful): http://forums.logitech.com/t5/forums/searchpage/tab/message?location=Board%3Aquickcam_software&q=launcher+main#message-list
Logitech product support can also help: http://www.logitech.com/en-us/support-downloads?debug=0
-
How to remove network drives mapped Windows 7.i can't remove. Already disconnected, but still its disk showing with red cross.i am not able to create new drive with the drive letter of Red Cross, pls help me to solve it.
1. open a command prompt.
2 in the command prompt, type the following command and press ENTER.
NOTE: replaced by z: in the command below with the actual drive letter of the mapped network drive that you want to cancel your computer window (deletion) mapping .
- NET use Z:/delete
3 when finshed, close the command prompts. So the mapped network drive shoud be removed from the window of your computer.
Kind regardsJ Chambers -
I can't install my Adobe Acrobat 9 Pro in my new HP Pavilion all-in-one computer desktop drive, because my new HP does not insert the disc in a disc drive. What can I do to fix this problem?
Hi edwards39572619 ,
Please visit this link to download Acrobat 9 Pro:-download Acrobat 8 and Acrobat 9
Let me know how it goes.
Kind regards
Christian
-
Whenever I click on any button of the trial download on the adobe Web site you I get redirected to a page where the 4 squares are moving to load the page, but never load it, I left my browser on for hours and yet it still doesn't work anyone can help?
clear your adobe.com cookies or use a different browser.
-
After reinstalled Lr 5 with a drive on my computer; installation ended but Lr 5 did not appear in my application file.
What can I do to fix this?
What is your operating system?
-
My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?
Not knowing what the 'followed the steps posted' have been
The iOS device connects to other networks? If Yes, which tends to indicate a problem with your network.
The iOS device sees the network?
Error messages?
Other devices connect now?
The iOS device has connected before?
Try the following to rule out a software problem:
-Reset the device iOS. Nothing will be lost
Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to
ten seconds, until the Apple logo appears.
-Power off, then back on your router
. - Reset network settings: settings > general > reset > reset network settings
- iOS: troubleshooting connections and Wi - Fi networks
If your iPhone, iPad or iPod touch connects to a Wi - Fi network
- iOS: recommended for WiFi routers and access points
-Restore from backup. See:
-Restore factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.
-
in some progaram, as Facebook GAMES, when I have to go to an another screem or ask for assistance to complete a task. the screem never continue or complete. What can I do to fix this?
Hi Dene Dixon,
· You receive an error message?
· Did you the latest changes on the computer?
· What web browser do you use?
If you use Internet Explorer, I suggest you to try the steps mentioned below and check if it works.
Step 1: Follow the provided article.
http://support.Microsoft.com/kb/308260
Step 2: Follow the article provided to enable compatibility view in internet explore.
-
I can't open or download anything that it either without a window saying 'open with' arise, what can I do to fix this? I'm so frustrated.
I can't open or download anything that it either without a window saying 'open with' arise, what can I do to fix this? I'm so frustrated.
Use the following method. It works with your particular issue.Open with appears whenever I try to open a programScroll down to the answer given by Phantom010:Download and merge the reg. EXEFIX .quote...Try this registry fix: EXEFIXUnzip the patch and extract it. REG file on your desktop. Right click on the REG file and choose Merge. Note that you must be an administrator to apply this hotfix.
Reset.
Maybe you are looking for
-
I was downloading 300 messages using GET MAIL and he won after 200 messages. Thereafter, every time I hit GET MAIL it says it downloads 1 of 130 (or more) messages and then quickly shuts down indicating "no message to download. The last message it do
-
Backup via Time Machine: do I need a blank disc?
It's a simple question, but one I don't know the answer to. I have a 1 TB external harddrive (I learned to re - format here, thank you very much), and it has a couple of value of concerts of different files. Can I use this hard drive partially filled
-
Windows does not start. Message: \system32\hal.dll is missing or damaged. W - XP was factory installed/Dell machine, no installation cd as backup to fix/incorrect file copy. Any help is appreciated.
-
How can I set my default email in Hotmail?
Original title: default program How do I configure my email to hotmail by default, so when I click on an e-mail address, it opens hotmail, not my microsoft outlook window. Thus, the icon of mail at the top of my internet explore opens outlook when I
-
UpdateJad.exe using causes the tool remove option request to disappear
The tool on the UpdateJad group several COD to an existing JAD files. Delivered in the JAD is a main UiApplication and an Application with no homescreen icon that my main of the application is running. What has resulted, it is there is no option to r