My new MacBook will not let me install PSE10 I downloaded from your site. I have the hard drive version but my MacBook doesn't have a CD player. Please notify.

Similar Questions

• HP Photosmart c410a: new computer will not let me install the photosmart software... 'enable usb in BIOS '.

  What a waste.  Just bought a new computer with Windows7 Pro descktop installed.  Could not load the HP software by using the cd or download from HP. I get the message below.  New computer and all the usb ports work.

  ANYONE?

  Photosmart c410a

  NMR SDGOB-0826

  p/n is not found

  Thank you

  USB drivers "this computer has no USB software necessary support to allow for the completion of an installation of the USB." The installation cannot continue until this is resolved.

  Action required: click Cancel to exit this software installation. To install this device as a USB device, see your computer documentation or the documentation of expansion card USB for more information on USB drivers. »

  A USB device "this computer does not have the necessary support of USB hardware enabled to allow for the completion of an installation of USB. The installation cannot continue until this is resolved.

  Action required: click Cancel to exit this software installation. In order to install this as a USB device, see your computer documentation or documentation for more information USB expansion card. If you are sure that your computer has the physical USB connectors, refer to the documentation on how to enable USB in the BIOS of your computer. »

  In fact his problem with the installation.

  Extract the exe file in a folder using 7zip

  Then delete usbready.exe

  And run setup.exe

  I had this exact error and solved with these exact steps on a new installation of windows with asus motherboard with all the usb ports on work.

  For some reason any the usbready.exe is just trash in some installations and does not correctly detect the usb ports.

  Edit: You can also follow these steps if you do not want / can not install 7zip

  From Windows Explorer type folder in the address bar and press ENTER.

  Locate and open the most recent HP installation folder, which begins with 7z (e.g. 7z1234a).

  Open the installation folder.

  Locate the file named usbready.exe, rename it to usbready1.exe or delete it.

  Go back up a level and start the Setup.exe program.

  Now follow the installation and check the differences.

• New iMac will not let me install iMovie 10.1 and iMovie 9.0.9

  Hello

  I have a new iMac (with Capitan 10.11.1) and has made a transfer of my old iMac, where I was running both iMovie (for all my new films since 2013) 10.1 and 9.0.9 iMovie (for my pre of movies more old-2013). However, my new iMac only copied through the iMovie 10.1 and refuses to allow me to install iMovie 9.0.9 too.

  Two options:

  Is there an easy way to get my iMac to allow two versions of iMovie to run?

  OR

  There's an easy way to transfer all my projects and events 9.0.9 iMovie in the iMovie 10.1 library so I can watch all my old files (*.prj) project

  Grateful for all suggestions / advice

  Thank you very much

  Evie

  iMovie 9 does not work properly with El Capitan.

  I suggest that you use your old mac to transfer your iMovie projects to iMovie 10 9.   You then consolidate projects and events that you have just updated in order to ensure that the library contains everything and has no links to files on the old mac that won't be available on the new mac.  See: http://help.apple.com/imovie/mac/10.1/#/mov882dee351 for more details.

  Give a distinct name to the library and copy it with Finder via a network or an external drive for the new mac.  You can then copy the updated events and projects of the first library on the new mac.  See: http://help.apple.com/imovie/mac/10.1/#/mov3fa25bae7 for more details.

  When you are sure that everything is working OK you can trash the library with the Finder.  First close iMovie.

  Geoff.

• Satellite L850 - Win8.1 will not let me install the chipset drivers

  Hello

  After I've upgraded to pro 8.1 windows 64 bit 64-bit windows 8 (preinstalled), I thought that windows will not let me install the chipset drivers (downloaded from "toshiba site" for windows 8.1 pro 64-bit), but they stay with windows drivers installed for them.
  The Device Manager displays all installed and properly using. In addition, during the implementation was executed to install the chipset driver, he skipped most of them, to install a missing driver only (unfortunately have not kept any screen to show). I tried to install using the Device Manager (automatic search or manually navigating the computer files downloaded from the site), but it keeps saying that the drivers are up-to-date (drivers with the version from 2006, when later seen on the site are 2014). Any suggestion what to do?

  Model name: Satellite L850-1MK
  Version of the operating system: Microsoft Windows 8.1 Pro 6.3.9600
  CPU: Intel (r) Core i7-3630QM cpu @ 2.4 GHz
  GPU: AMD Radeon HD 7600M

  Hey... good news.
  Thanks for the comments.

• I am trying to print coupons from a Web site. It says I need I'm trying to install Coupon Activator. Then when I try, I get an error message. It will not let me install on my computer.

  I want to print coupons from my computer.  Activator coupon says I need to install it, when I try to install and run the program I get an error message.

  I am trying to print coupons from a Web site. I try to install Coupon Activator. Then when I try, I get an error message.  It will not let me install on my computer.

  Hi Dustin,

  Thanks for posting. You will have to contact the support for the program in which you can not install. If you encounter problems, install any programs please let us know with the exact error message.

  Thank you!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows 7 will not let me install my Kodak Digital Camera C875 camera.

  Someone can tell me why Windows 7 will not let me install my camera, worked very well in Visa, any help out there?

  Original title: Kodak Digital Camera C875

  The best way to manage old cameras that have compatibility problems is not to connect the camera to the computer, but rather to remove the memory card from the camera and use a desktop card reader to make transfers.

  If your computer lacks a built-in card reader, you can buy very cheap () USB card readers

• will not let me install aftier efects... told me that page have problems and you try later... but who told me a week ago

  will not let me install aftier efects... told me that page have problems and you try later... but who told me a week ago not if someone else will pass this... I download a pc... I do?

  Hello

  Please see after effects configuration required for Mac OS and Windows

  You can try to download and install Creative Cloud to desktop and then you can install After Effects.

  Kind regards

  Sheena

• A friend offered to sell me his MacBook.  It was new in 2010 or 2011.  I'm not sure of the size of the hard drive is, but it has 16 MB of ram.  Any suggestions on what would be a reasonable price?

  A friend offered to sell me his MacBook.  It was new in 2010 or 2011.  I'm not sure of the size of the hard drive is, but it has 16 MB of RAM.  Any suggestions on what would be a reasonable price?

  This isn't a topic appropriate for the forums. We only used the material price. Visit eBay to find this information.

• I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number?

  I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number? I have sony laptop.

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  http://eSupport.Sony.com/

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Mick Murphy - Microsoft partner

• Dell Power edge 2850 will not let me install windows server 2003

  Hello

  I tried to install windows server 2003 on a few servers, I received a few weeks back.  The RAID put a system in place and turned but when it tries to install WS he says that there are no hard drives.

  I tried to download "server Dell Power Edge update through bootable media / ISO ' but there is no download for a 2850.

  Also I tried to download this "Dell systems build and Update Utility" but most of the time it stops and says failed download...

  Hello

  Also visit this link

  This link is the user's guide.

  And another one

  I bought a 2950 on Ebay the month last but never had the intention on the installation of a Windows operating system, but I downloaded the ISO of DVD here file and installed without any problem they send you a key to save the operating system. I updated the bios after this and no problem. You never said how many hard drives you have, but make sure that you have two or more. So far, I've installed VMWare ESXi which was supported on 2950 but I settled with XenServer 6.5.0 and I 2003 server running as a virtual machine which works very well.

  I have a Dell XPS workstation I have recently reinstalled Windows 7 on it but I had only one drive is connected and the operating system could not see all of the hard drives. After that a second device and do not use raid on this machine, I was able to install Windows. I tried the ISO Live Dell 2850 version but it is not a. Which includes diagnostic tools. When you by a Dell there pre installed in a hidden partition on the disk utility, you can run, but it really isn't anything I know install that. Usually the F12 key will give you a list of items to boot from and if she isn't here the disk, it cannot run. The diagnostic utility that is.

• Satellite P100 - 194 PSPA6E does not start and will not let me install Windows

  Hello

  I have a problem with my Satellite phone, witch, I got from my brother. I don't know what he did with it, but he does not know.

  When I start the PXE - E61 "Media test failure, check cable" appears. In the BIOS I put in the directory Boot LAN mode on the last position, but despite this failure E61 appears.

  I tried to reinstall Windows XP. The laptop started from the CD and the blue screen appeared and loaded XP drivers needed. But at the end of it, when you enter normally on the menu to choose where to install windows, the screen is black and in the upper left corner a small beam blinked on and outside and nothing happens plus.
  The same thing happens when I leave the laptop HARD drive and start again from the XP installation CD but this time without the HARD disc logically.
  So I thought that the HARD drive is broken and I put it in my desktop PC to test. I installed XP on the drive HARD Satellite in my PC, which worked without problems in my PC. So, I come to the conclusion that the HARD drive is not broken.
  And my BIOS Satellite detects my HARD drive and displays the name of it.

  But what is the problem with the laptop when it is not the HARD drive and BIOS show the good name of the HARD drive? Can someone help me please?

  Hello

  The story is very strange boyfriend generally that the PXE error if the laptop tries to boot from LAN. But in the case where starting LAN source in unavailable, the PXE error appears and shows this message.

  Usually, the BIOS passes LAN Boot option because the other options are not active. This means that the CD/DVD drive does not any bootable disk and the HARD disk is dead.

  So, as you can see you hypothesis was right that the HARD drive could be faulty

  In any case, try to access the BIOS and set it to the default settings save changes and then try to reinstall Windows XP.
  You might also try another HARD drive, I know as your fist HDD recognized correctly but it s worth a try to test the 2nd HARD drive.

• Will not let me install the Intellegent background transfer Service

  I just started using my old Windows XP computer and I need to install updates, but every time I try to do that it says I have to install BITS. When I tried to install it it doesn't twice twice. First time I tried to install it on this site and the second time I downloaded from this site manually and tried to install it but nothing. When I tried to install it from this site, nothing happened, it doesn't tell me why the instillation 'fail' and when I tried to install that manually, he would start extract the files and then say "the file is corrupt. What is going on?

  I just started using my old Windows XP computer and I need to install updates, but every time I try to do that it says I have to install BITS. When I tried to install it it doesn't twice twice. First time I tried to install it on this site and the second time I downloaded from this site manually and tried to install it but nothing. When I tried to install it from this site, nothing happened, it doesn't tell me why the instillation 'fail' and when I tried to install that manually, he would start extract the files and then say "the file is corrupt. What is going on?

  William,

  This is the forum for Windows Vista update. Suggest that you post on the forum of Windows Update to get help:
  Windows Update

  Also, suggest that you include information about the level of Service Pack of XP, what security/antivirus suite is installed, and if a 3rd party firewall is used.
  MowGreen MVP Data Center Management - update of safety Consumer Services

• Found New Hardware Wizard will not let me install things.

  Hello.
  I have Windows XP and every time I try to plug something for the 1st time, such as a USB, a window that reads the found new hardware wizard appears. He asks me if windows update can search for new software. It gives me so "Yes, always", "Yes just for this" or "no, not this time". No matter that we I press, another window appears which says ' if it came with an installation cd put in now "then gives me the options either"install the software automatically or manually." When I press the other, she begins searching and, after a minute or two, a window appears saying that the software had failed the compatibility test, even when I got from devices that say they are compatible with windows xp. Then it gives me the option to stop or to continue. No matter what I press, the Hardware Wizard says there is an error and closes. Subsequently, it will not recognize the USB and I have to uninstall it.  This also occurs when you try to install things like itunes.
  Someone help me please. I have not tried it on other computers because I have no one else at my disposal. I tried to contact the company USB but I was told that it's a computer, not a jumpdrive, question.

  Thank you for your help.

  Try the steps in the below given Web site

  http://www.technipages.com/disable-has-not-passed-Windows-logo-testing-message.html

• I just bought a HP Win 7 (unfortunately) workstation running. My previous computer ran HP XP. Windows will not let me install my fonts.

  Don't get me wrong, the HP workstation is great, it's Windows, I just can't stand.

  I tried to double click on the fonts to install and Windows returns an error message. I tried dragging the fonts in Windows 7 fonts folder and it gives me an error message. I downloaded AFM to PFM because Windows says I need the PFM files, but when I run the AFM to PFM, it returns the message that the PFM files are already there.

  I bought a laptop Sony a couple of years ago with Vista and fell on this problem. I despised Vista so I sold the Sony and remained with XP on my HP Workstation. In fact, I was so p - o'ed on Vista, I went out and bought a Mac Pro and Mac Book Pro, as I intend to dump Windows altogether. Unfortunately, the vast majority of my work required of Windows programs.

  Given that, I decided to go for the new HP workstation because I had heard horror stories less on Win 7. I was then going to sell both of my Macs.

  Unfortunately, it was a BIG mistake because now I'm stuck with a work station $3,400 that I can't use to work on my documents InDesign, Illustrator and Word that have all of the fonts I was running XP (and which run WITHOUT problem on my Mac).

  It is a problem of Windows, and when I tried to contact MS supports, I was directed to HP since Win 7 is pre-installed on my workstation.

  I just got the phone with HP Technology Support and they say they can't help because even if it IS a WINDOWS PROBLEM, they do not support software related issues.

  I even tried to copy the font files to the Directory Windows on my old PC, nothing helps.

  I'm willing to put this thing on eBay so I can't empty MS FOR GOOD!

  Any help would be LARGELY APPRECIATED1

  Hi AndrewHerman,

  The steps in this thread has helped other users who have also struggled to install fonts in Windows 7. Let us know if that helps.

• My Dell Studio 17 (with Vista Home Premium) will not let me install anything... ?

  Okay, so I recently bought a laptop... About two weeks ago now, I think that... It's a Dell Studio 17, and it runs on Windows Vista Edition Home Premium. So far, I had a lot of problems to install programs on it. When I tried to install AIM (AOL Instant Messenger) it wouldn't download; I finally managed to do install via the start menu somehow...
  BUT now LENS won't let me sign... but that's another story! lol - the real thing that worries me is not able to install games. I just bought the Sims 3 and after inserting the disc, choose a language and a count of the wizard InstallShield, once I have access to the license agreement page and click on 'I agree' and click 'Next' an error message pops up saying something about impossible to install. He has a huge long error code and I don't know what that means. At first, I thought there was something wrong with the drive, so I went back to the store and exchanged it for a new one. When I got home and tried to install it again, it's the same thing. Then I tried to install another game that I have (Zoo Tycoon - Zookeeper edition) just to see if any game would work... It's the same thing; before he actually started to install an error message came. The first error message said something to have an invalid character in some way... ? ! (no idea...) Then an other error message pops up something else I didn't really...
  So, as you can see, there must be something wrong with my laptop. PLEASE HELP SOMEONE. I would appreciate advice...!

  Hello

  Try to run the game as administrator installation program.

  1. open the content inside the game CD/DVD.
  2. right-click on the configuration file.
  3. Select 'Run as administrator'.

  Alternatively, you can try to install Windows Installer 4.5 from the link:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  For 32-bit system: Windows6. 0-KB942288-v2-x 86.msu
  For 64-bit system: Windows6. 0-KB942288-v2-x 64.msu

  Good luck!