My new printer no longer print.

Similar Questions

• HP Office Jet Pro 8720: Problem set up and launch the new printer & ink cartridge installation

  Two questions:
  First... it takes a LONG time for the computer to open itself.
  Then, when he did initiate... I opened the section of ink cartridge
  to install the ink & transport of ink would not come to the Center.
  SO... I stopped the printer to start again... and now, the
  screen has a spinning wheel indicating "cartridges controls."
  It lasts for more than half an hour.
  HELP... This is a new printer & I can't open.
  Thank you kindly.

  Hi @paulallah,

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you have a printer of HP all-in-one OfficeJet Pro 8720 which took a long time to initialize and is now stuck in a mode 'check' cartridges after the reboot it because transport would not move to the Center. I would like to help with that.

  I would start by doing a Reset of the power on the printer.

  

  If that fails to solve the problem, you might want to speak with HP Technical Support as there may be a hardware problem.

  You mentioned that you are using a Mac running OS X 10.5 Leopard or more. The HP all-in-one OfficeJet Pro 8720 printer is only compatible with Mac OS X 10.7 Lion or later.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• OfficeJet Pro 6830: Change HP ePrint address when adding new printer

  I recently bought a new printer to replace the one I had.  I chose a custom for ePrint with the old printer e-mail address.  I removed the old printer to my devices, but when I try to update the email ePrint for the new printer, it is said that the enamel is already used.  I want really to use the simpler email ePrint, I chose, rather than an HP gave me.  Is it possible to do this?  Thank you!

  Hello

  I'm afraid there is no way to use the previous e-mail address.

  An any used ePrint address no solitaire is usable for any device remove or even for the specific device (for example after a reset of the product) for reasons of security.

  You must choose a new address custom ePrint, the past can no longer be used.

  Kind regards

  Shlomi

• email migration to a new printer

  Hello

  I had an old HP printer which had a specific email for ePrint. Now, I bought a new HP printer and can no longer use the old one. I would use the old e-mail address on the printer. Do you know how I can do?

  Thank you!

  chrisdelz

  Hi chrisdelz,

  I fear that this can not be done.

  The same address of HP ePrint unusable on several devices, once it has been registered for a device, it cannot be used for any other device and will be unavailable for selection.

  You will need to use a different address for your new printer.

  Kind regards

  Shlomi

• I am trying to install a new printer, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?

  I am trying to install a new printer, and to do that I know I have to disable firewall settings. I try, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?

  I tried to go into Windows and change the settings of the firewall, but I get the same message.

  I also tried to run an update of the Windows security updates, but same message.

  I use Windows XP Professional Service Pack 3

  Any help would be greatly appreciated?

  Thank you

  M

  HI Maria/Winston.Not, trying to be coy but. I've never had close the firewall to load anything. It will be, or at least should invite you to make a choice to leave the program to run or not? Nevertheless.If you have windows activation hurt you firewall can reactivate manually without going through the bugs that you can not. If you click Start and choose the runtime application. Type cmd, and then press ENTER. When the command prompt box appears type "netsh winsock reset" without the quotes. He'll say firewall reactivated and ask for a reboot. Restart the computer and it will be active again. Just trying to help.

  Hi Winston/Hewlit,

  Thank you both for your advice.
  While waiting for your answers, I pushed all sorts of buttons and downloaded all kinds of programs in the hope that I could break the firewall (Hewlit the printer I tried to install says to disable the firewall to install the printer, and then turn it back on?).
  After a reboot, the message 'corrupt windows\system32 etc' file came and asked me to put in the original disc of Windows XP, I did not.
  Cut a long story short, I have now booked for a technician to come out as I'm totally lost.
  Thanks again for your help,
  M

• HP solutions Center not in new printing software

  I recently bought the HP Photosmart e-all-in-one 7510 device, it replaced my HP J6480 all-in-one. One of the programs with the software J6380s has been that something called "HP solutions Center." I ended up uninstalling the Solution Center and all the HP software to fix a bug. I installed successfully the new printer and software, however, the digital dashboard is very rudimentary. It lacks several features that I really enjoyed with Solution Center: 1. the is scan searchable .pdf documents 2. several photos with a scan (can not do this with the basic software provided with the 7510) 3. easier handling of scanned documents, (crops, rotation, etc.). The printer is a great, but without the software to drive... I tried to find a 'Contact HP with a suggestion/comment' link, but unfortunately, everything is suitable for technical support. Everything works fine, so I really don't need to contact technical support. Does anyone know if HP will integrate Solution Center in an update of the player/softward futre. It seems that all new everything-in-one have more solutions as part of the software Center. Thank you

  Hello

  One of the latest HP products come with different software, no longer aiming the center of HP solutions and will most likely not include it in the future.

  1. I'm afraid you won't be able to save a searchable PDF using the specific printer.
  Unlike products Officejet, Photosmart products does not include OCR application as part of the HP software, which means that text or searchable PDF editable scan are not available. for this, you can use any 3rd party software scanning.

  You can try Vuescan to 3rd party software, in my opinion, it should provide this kind of functionality.

  It can also answer your problem of 3rd.

  2. to scan multiple pages into a single file, the pages in the feeder from the lace top and then analyze by selecting the Document in the file option.

  You can also do this from the flat bed scanner by launching the software from your PC.

  Click on scan a Document or Photo and select the Document in the file option.

  Make sure the show the preview scan option is checked and click on scan.

  Use the button "+" under Add / Remove PAges to add more pages, filnally, click on save.

  Hope you find this information useful,

  Shlomi

• new printer solution Center

  I use the Solution Center to analyze.  I just installed a new printer, a 6700 and solution center not to see.  How can I tell the solution center there?  How can I get rid of my old printer?

  Thank you

  Although Lion99 is correct, it is also more information that can be shared with you. First, you'll want to remove any old software you have for the HP prtevious printers you no longer use. So if you have not installed the software of full adjustment, follow the link below for this driver package:

  http://goo.GL/ioY81

  Instead of the Solution Center icon, this will install an icon on your desktop that resembles the 6700 bonus and you will be able to access many of the same characteristics of SC in this program. I hope this information is useful for you!

  Have a great day!

  

• Once you install a new printer firmware for your printer, is it possible to return to the earlier version of the firmware of the printer in case an error occurs?

  Once you install a new printer firmware for your printer, is it possible to return to the earlier version of the firmware of the printer in case an error occurs?

  It may be an option, as long as the error prevents you to connect to the machine. Even so, some firmware update software will not allow a downgrade. This is something that you should go to the manufacturer of the printer for more information.

• LaserJet: Can I force a newer printer to imitate the old Laserjet model?

  Try to replace the printer on an instrument of laboratory a few years to find the compatible template.

  Printer provided originally is Laserjet 1100.

  The system works very well with the Laserjet 1100, I believe with 1320 and other series of 1000, but NOT with the LaserJet 2000 or later.

  Is it possible to force a newer printer (for example P2035) to "pretend" that it's the 1100 model?

  The 1100 uses only PCL5e; the P2035 has PCL5e as one of its languages, but still does not print correctly.

  I believe that the instrument asks the printer port & request "who's there?" and adjusts its output according to the response of the printer; seems he misunderstands P2035 response and other models I've tried like P2014.

  No, I can't change the behavior of the instrument or the exit without a VERY expensive change.

  Centronics parallel connection, I believe that a parallel-USB adapter would not help.

  Test options are very limited due to the location of the instrument in a biological laboratory; If something is happening here that it can exit only by autoclave!

  Any ideas out there?

  Frankly I recommend you buy a LaserJet P3015, then go online and buy a parallel EIO port, they are cheap on ebay.

  HP EIO parallel port is supported in the P3015, but this just printer model is no longer supported, but it is still available if you go out and get a fairly quicklvy.

  Your other option is simply to find a used LaserJet 4000, 4100, or 42 X 0 printer, these models all have a built-in parallel port.

  I just discovered the P3015 be be abandoned to randomly talk to someone in sales to the company that I work.

  Due to another scenario, I checked the parallel EIO port that made HP is compatible with the P3015.

  The parallel port also work in HP P4015, but HP does not guarantee that it does, I saw it work properly from any PC in this way however external Jetdirects will have problems with it. I do not know how he would react on your lab equipment, that's why I recommend the P3015 which you can always buy new with a warranty.

  If my post decided and your problem please mark as a solution. You can thank all tech for a good post giving him a helping hand to the top just click the button below the post.

• Dialog box print short when the new printer synchronized via CS5 how do you get the options the printer?

  I recently purchase a new printer - the Epson SureColor P800 and trying to set up my preferences to print found the print setting dialog box is abbreviated. It is no longer a printer asking drop to disable color management.  Instead, there is a box of media and quality. I can't disengage from the printer color management to get the proper color balance. Help! I tried to update my CS5 and also run into snags is that related?

  Hi RuthC,

  Could you please attach a screenshot of the print window.

  Also what operating system you are working on Windows or MAC?

  Kind regards

  Tanuj

• Not enjoying not my new printer - please help!

  I am really impressed with my new printer (my first HP product ever). When it works.

  The printer in question is the CN245B printer all-in-one HP Photosmart HP wireless.

  I did have trouble with the drivers. I use a laptop with Windows 7 Professional 64 bit.

  Every day the printer decides it is more print wireless, and I have to uninstall and reinstall the drivers. Now, I also have another question. My printer "disappears" from "Devices and printers" in windows. Which means that I'm going to print something and my HP printer is gone in the print dialog box. I have to uninstall and reinstall the drivers to make it work again! At any given time the HP printer monitor software (or it may have been Windows Update - can't remember) informed me that there is a critical update solves the problem of printer which disappears. I clicked to download and install the update. After installation, I went to print something and my printer disappeared - the very thing that the update was meant to fix!

  After having had my printer go for the 3rd time this week, I tried to manually download this critical update on the HP support site. However, every time I click on the download link, I get an error saying: access denied. I tried to disable my firewall but still get the error. I get the same error if I try to download anything from the support site (for example printer driver).

  I'm not at all happy that this great printer little is being crippled by poor quality drivers and support.

  One last thing. I've never known a printer driver take so long to install. Why drivers HP take so long?

  Someone can help me with these questions and can someone tell me the critical update (named: CPE_SLP_NETWORKMSI_hpcom_000_006.exe) I can upload actually?

  Thanks in advance!

  Edit: I discovered what causes the printer to disappear. This is when I restart the laptop. So, anyone got any solutions?

  Your browser settings seem to block FTP: / / transfers.  Try this link.  This binding uses the same address, but replaces the ftp: / / with http:// at the beginning.

• New printer, old computer... drivers?

  Still clinging to my Powermac G5 OS10.5.8

  Need a new printer, and despite advertising to the contrary, the HP Envy 4523 I bought does not have a driver for this OS.

  Cannot update the computer any more away.

  Is there a work around please?

  Thanks for any help - I'll let you my credit cards in my will.

  Hi Peter, try the generic PCL driver, or...

  http://hints.Macworld.com/article.php?story=20050614073852224

• My new printer does not appear in the list of printers

  I bought a new HP Officejet Pro 8715 and I had great difficulty it is set up to use. It seems the method to print and scan drivers has changed dramatically since my last new printer. HP supplies over a CD with the software, but rather is supposed to happen automatically via the Apple software when I plug in the printer. This was not the case.

  At this point, I have the printer (4 hours) work, but I can't get the software "Readiris' of scanning to work. Yet once again, I am told that if I just plug the printer via the USB port and turn it on, then the OS knows what software to load. In reality, he doesn't "know" or "do" something.

  I tried to configure manually by going to System Preferences > Print & Scan and then by clicking on the sign more to add the printer software. This will show you a huge list of printers, but the list ends with "Officejet Pro 8660." My printer is a 8715, so there is nothing for my printer. Installation of the software for 8660 did not help to solve the problem.

  Two questions:

  1. why list of Apple printers does not have my printer?

  2. How can I get the Apple software to see the drivers for my printer?

  Thanks in advance for any help or advice!

  1. If the printer is a new model and HP did not provide Apple with the driver software, Apple would not list.

  2. go to the HP site to find and download the driver software.

  http://www.printerdriverforwindows.com/HP-OfficeJet-Pro-8660-driver-download

• my new printer envy will not respond

  just bought a new printer. A desire to hp 4500. lived all st arrangements but the printer does not print my documents. It does not meet hp as test print instructions. what I am doing wrong?

  Hi andersjg, I'm sorry, but we can only help you with subjects on mozilla products in this forum. If you need help setting up your new printer, please contact hp support instead. Thank you for your understanding!

• I have no Windows Tool bar feature and need to add a new printer for Firefox. How can I do?

  When I go to a different web server, there is a toolbar at the top ' file and with other functions. " I don't have this toolbar with Firefox. I bought a new printer, I need to conect to Firefox to be able to print.

  How do the bar and conect the printer

  Hi pastore27.

  You should be able to print documents from Web pages using Firefox. The "print" button should display by default. However, it is possible, it has been removed during an upgrade or because of personal preferences. The way to fix:

  1. Firefox > view > toolbars > customize
  2. Select the printer icon and drag it to your browser window

  I also found a Support article on the restoration of the toolbars, as you say it lacked the toolbar:

  The back, home, bookmarks navigation buttons and recharge are missing

  I hope that helps!