'VMware Workstation does not support the multiple monitors feature in other guests'

Similar Questions

• VMware ESXi does not support the RAID on HP Proliant ML110 G5 drives

  Hello

  I installed VMware ESXi on my HP Proliant ML110 G5. I got 3 hard drives on my server at the moment, one of them is VMware ESXi and other two are RAID1.
  Whenever I connect to my server via vSphere client I have the chance to see every HARD drive (datastore) separately.  Is it possible that VMware does not RAID installation?
  I would need to see these two hard drives as a data store. Do you have any ideas on how I can do?
  Thank you.

  like any other typical server, you need to configure the sata raid controller RAID5/RAID0. but keep in mind that this controller without any battery backed cache would have very horrible performance. Another way is that you can use datastore span to provide as a large store of data, but if you lose all of the computer, you will lose all data.

• Why vmware workstation does not mask the cpuid SYSCALL/SYSRET little?

  I am running VMware workstation 11.1.3 on linux.  In my client operating system 64-bit, I notice that cpuid for eax = 0 x 8000001 returns a value edx masks who has always little 11.  It's the bit SYSCALL/SYSRET ability.

  Here is the part of the vmware.log file shows the parameters of my hostCPUID:

  2016 02-03 T 15: 59:19.629 - 08:00 | VMX | I120: hostCPUID level 80000001, 0: 0x00000000 0x00000000 0 x 00000021 0x2c100800

  As you can see, edx is 0x2c100800, which means that my system is capable of SYSCALL/SYSRET.

  I tried to add the following to my vmx file:

  monitor_control.enable_fullcpuid = 'TRUE '.

  CPUID.80000001.EDX = '-:-:-:-:-: 1 -: -: - ".

  Unfortunately, even with these settings, my diary of vmware shows no entry in the section 'Differences CPUID of hostCPUID' to cpuid.80000001.

  As a test, I tried to change bit 10 instead of 11 to cpuid.80000001.edx bits and the difference that presented themselves.  So what is the 11 bit characteristic, and why is he always have hidden inside the virtual machine no matter what I do?

  Thank you.

  You check what code 64-bit or 32-bit code in compatibility mode?  Mode 32 bits (legacy and compatibility), only AMD processors set this bit.

• graphics card does not support the Aero effects?

  Sapphire Radeon Vapor-X HD 7770 GHZ OC 1 GB
  DDR5 DVI-I/DVI-D/HDMI/DP PCI-Express graphics card

  1 x Dual - Link DVI, 1 x DVI Single-Link
  1 x HDMI (with 3D)
  1 x Display Port
  Display Port 1.2
  1100 MHz base clock
  5200 MHz Effective
  128-bit GDDR5 memory

  the SAPPHIRE HD 7770 Vapor-X OC Edition
  has 1 GB of more recent DDR5 memory,
  and is factory overclocked with clocks of 1100 MHz core
  and memory clocks 1300 MHz (5.2 GB/s into force) to deliver excellent performance
  Work or play with multiple monitors is becoming more and more popular.

  Windows experience index note my video card with a fat score 7.6

  and NOW windows 7 64 bit is tell me
  that my epic video card does not support the Aero effects?

  You owe joke... !!!

  Hello Dan,.

  Thanks for posting your query in Microsoft Community.

  I understand that you get the message that the aero effects are not supported by your video card. I would help you with the question. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. What is the edition of Windows 7 installed on your computer (Home Premium, professional, Ultimate etc.)?
  2. What is the brand and model number. your computer?
  3. What is the exact message you get?

  The question could arise if Windows 7 is not compatible with the version of the driver or if the driver you are using, in particular, does not supports the Aero effects.

  I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Run the next fixit and then re-run the assessment. Check if it is useful.

  Visual effects Aero Glass in Windows are not working or displayed

  If the problem persists, try the following method.

  Method 2:

  See the steps in the following Knowledge Base article and check if the question is reproduced.

  Guided Help: the problems of Aero in Windows 7

  In addition, I suggest you refer to the section: Aero material required in the following article and check if the problem persists.

  What is the Aero visual experience?

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• The system does not support the mode full screen for cmd

  Respected Sir/Madam

  I am user of Windows vista HOme basic... .also I have Windows 7 user... I'm basicllly, a student in computer engineering...

  I get an error "The system does not support the mode full screen" for cmd.exe in C++ turboo or JDK.. .then I getproblem by entering n compiled the program...

  my PC configuration is

  :-AMD 6000 + dual core Athlon 64 X processor

  Monitor:-Viewsoni

  RAM :-1Go

  Please give me a solution to problem 4 I wanted to run cmd mode full screen...

  your help will be appreciated by me highlly...

  thanking you

  Philippe

  Vista + do not support a command prompt full screen, as indicated by the message. You can manipulate the available to the command window to specify the width and height to be as big as you want, but this isn't quite the same thing...

• P2V then "an IDE controller is found, but the VM does not support the option.

  I am very new for ESX and ESXi. I am trying to convert the server running (really a Dell PC) to a virtual machine that runs on ESXi (we are in phase, about to move all real servers ESX or ESXi, if we love him test). After a conversion on the server, by using the agent option in VMware vCenter Coverter Standalone version 4.0.0 I get the following error when attempting to change the virtual machine to 'clean up' after the P2V conversion.

  An IDE controller is found, but the VM does not support the option

  ESXi is version 4.

  Any ideas? Google is of no help for the exact error.

  Try to use the latest converter, 4.0.1 instead.

• The document _ is on a volume that does not support the permanent version storage.  You will not be able to access older versions of this document once you close.

  I recently started getting this strange message, usually when a Pages document is closed:

  «The document _ is on a volume that does not support the permanent version storage.»  You can access older versions of this document once you close. »

  All my research (apple.com and on the internet) have not enabled all the information on this message.

  Hi Larry,

  The 'volume' is a hard disk, a partition on a hard drive or a storage as a USB device.

  OS X automatically saves your document frequent while you work on it. If the volume of the device / it records on a summer formatted to allow 'versioning', you will be able to use Time Machine to open previous versions of your document. If it has not been formatted like that, you get the message see you, and only the current version of the document will be saved.

  Kind regards

  Barry

• 'webplugin' does not support the maximum safety level of safari plugins

  Last night, I got connected to my Svat security system using Safari and left the computer with the browser showing all the security cameras. Early in the morning about 3 or 04:00 I was awake by restarting the computer I noticed that the OS has been updated.

  For now, I am trying to connect to my security system and Safari can not access the server. I went into properties and noticed the ['webplugin' does not support the maximum safety level of safari plug-ins] my security system stop working in windows because of the plugins for a long time so my only option is to use my mac-mini to access the system and now what happens.

  The name of the plugin in the security system is called HiDVRPlugin.dmg and the system is Svat. I tried to go to Safari preferences and enabling the plugin, but it still does not work.

  Any ideas on how to re activate or difficulty this plugin?

  Thank you

  Go back to an earlier version of Mac OS X is not an option? Or may be using a different browser?

• Could not load the doc Pages to iCloud. Said does not support the docs in packages. Why?

  When I try to drag a page to icloud file when it is opened in Firefox, I get the comment:

  Firefox does not support the download documents saved as packages
  Please use Safari

  What does that mean? What are packages?

  Hi Royden1,

  What is a page file and the template that you used to and what are you trying to use? Please research what the .pages file is compatible with, that means that Firefox does not support this file type. http://www.Macworld.com/article/20633.../how-to-work-with-iWorks-new-file-formats.html

• Unlocked Iphone a1549 does not support the Turkish GSM Carrier

  Hello

  I bought an Iphone 6 128 GB a1549 renovated factory unlocked from amazon, while I was in the United States. I came back to Turkey last Thursday and bought a sim card to use here. But my Iphone says it does not support the sim card. What do you think could be the problem and how can I solve it? Thank you.

  senyavuzselim wrote:

  What do you think could be the problem and how can I solve it?

  The phone is not unlocked.

• The new 5.0 does not support the functionality of the tab fox I love and I need a compatible similar add on - who do you suggest?

  I just downloaded firefox 5.0, which does not support the feature of best sites I've used so happily. Is there a similar add on that works with 5.0? I feel like I'm blind!

  Large. You may mark this issue as resolved.

• Norton AntiVirus 2005 does not support the repair feature

  Hello

  I ask for help I always get this message error/dialogue:
  "Norton AntiVirus 2005 does not support the repair feature, please uninstall and reinstall"
  along with
  "Please while Windows configures Norton AntiVirus 2005"

  Use the product Recovery CD from TOSHIBA L20? This will affect other tools than Norton?
  Just for mentinon, I have a dual boot linux/Windows.

  Thanks for your reply.
  Kind regards
  Eliyah

  Hello

  I recommend to check the tips on the Symantec Norton:
  http://Service1.Symantec.com/support/NAV.nsf/docid/2004090712504306?OpenDocument&LG=en&CT=UK&SEG=HHO& src = eu_hot

  > Use the recovery CD to the L-20 TOSHIBA product? This will affect other tools than Norton?
  The use of the recovery CD will set your laptop to original settings.
  I mean, the recovery CD will format the whole HARD drive and will delete all your files

• Does not support the Iphone 4

  I have an Iphone 4 and I was about to download this new app called Kylie and Kendall. I scrolled down to see what IOS, it supports and it says it's compatible with the IOS 7 Ipad, Iphone or Ipod so I was really excited to download and play. Long story short, after I downloaded it, I opened the app, and it started to load, but then he said "does not support the Iphone 4. I was really disappointed and sad, I was wondering why it says it's compatible with the IOS 7 and later, but apparently not. Because when I clicked on it says that it is not. That actually makes the loose money app and glory because owners of the Iphone 4 can be the game. Please someone tell me why he cannot support Iphone 4 or an expert in this company help us users of the Iphone 4. This isn't the only time where it happened to me happens to me in several applications, but I don't really understand this situation. Please help someone!

  This has nothing to do with Apple or iphone.

  You will need to contact the developer of the app and ask them what the issue is, or look at their support site.

• Selected physical channel DAQmxCreateAIVoltageChan OR-USB-9237 VB6 does not support the type of action required

  I have a VB6 program with code that correctly reads the analog inputs of a NOR-USB-6008.

  I tried to re - use the code in a module of extensometer OR-USB-9237, but at the stage of DAQmxCreateAIVoltageChan, I get the following error:

  "Measurements: physical channel selected does not support the type of measure required by the virtual channel you create."

  Create a channel to a type of measure that is supported by the physical channel, or select a physical channel that supports the type of measure. »

  Should I call one function other than DAQmxCreateAIVoltageChan?

  If so, what is it, or where can I find the reference for these functions?

  Or - if it of the right function, should I pass different arguments?  Currently, I'll call you:

  DAQmxErrChk DAQmxCreateAIVoltageChan(taskHandle, "Dev1/ai1", "", DAQmx_Val_Cfg_Default,-10, 10, DAQmx_Val_VoltageUnits1_Volts, "")

  Thanks in advance for your help

  -Alas

  I thought she 372251a. PDF

  Firstly, the correct function is DAQmxCreateAIVoltageChanWithExcit

  Second, you can't just ask for a sample single channel - ask for 2 samples instead.

  -Alas

• Why the new cRIO-9076 does not support the scanning engine?

  I spec'd a new chassis cRIO-9076 spiffy but learned that, despite its impressive capabilities, it does not support the analytical engine.

  I'm curious as to why this is.  I hope that this is not an indication of support OR away from the scan engine and perhaps NSV technology as well.

  OK, uninstalled and reinstalled OR RIO 4.0 and now all is well, guess it was just one of those inexplicable installation problems.