My PC cannot start up in limited error condition.

Similar Questions

• "Cannot start Microsoft Office Outlook" error message when you try to click on a name or contact us on a Web site to send a msg email on Outlook/microsoft office 2003

  "Cannot start Microsoft Office Outlook" error message when you try to click on a name or contact us on a website to send an email on Outlook/microsoft office 2003 Vista OS msg. My laptop came with Microsoft Office 2007 TRIAL version, but I already had Microsoft Office Pro 2003, so loaded on when I got it almost a year ago. My trial expired months ago... but never uninstalled cause 2003 worked. Then I wanted to do something in WORD and kept pulling up the 2007 trial and was confusing, so I sent the 2007 trial stuff to recycle bin, but not yet the uninstall. Since then all of a sudden I started to get this error msg. I can open OUTLOOK very well... BUT I don't even use OUTLOOK at all. I send from comcast.
  1. How can I get rid of this error?
  2. does anyone know how I can get my comcast open up when I go to a website to webmaster option instead of defaulting to outlook? And I already checked, "set as my default" is NOT enabled in outlook.
  Help, please!

  Hello

  Please check with the experts of the Office and Outlook here: (re - ask your question in these groups)

  Discussions of Questions General Outlook
  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=us

  MS Office discussion groups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
  And here:

  Microsoft.public.Outlook discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Outlook&cat=en_us_81f401b3-b3fe-4e8d-B291-066f30b63ec8&lang=en&CR=us

  Office newsgroups
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.Setup&cat=en_us_642d5640-c1ba-43C3-A224-b3ec1473346c&lang=en&CR=us

  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• Cannot start from the CD: Error Code 5. __Asking driver primary IDE channel.

  I install a new copy of windows 7 on my old computer. My computer have no major problems from Advisor Windows 7 report. When the system boots on the DVD I got the error message cannot START FROM the CD: error 5 CODE. Also, I can't start XP installation. When I get to the part on which partition to install I got the message to load a driver. He asks me to load a driver for the MAIN IDE CHANNEL. I have search on Intel, Gigabyte and other internet sites but have not found a specific driver.
  My computer is:
  Processor Intel P4 1.7Ghz
  15 GB OF RAM
  GeForce 7600GS
  320 GB IDE HARD DRIVE
  Card mother Gigabyte GA-8ITX3
  Intel 820 Chipset family with 82801BA (ICH2) I/O controller.

  Help, please!

  P.S. noticed that 2Angel had a similar problem but no solution.

  Error code 5 - can't boot from DVD

  Some people have reported that from the installation of Windows 7 so that Windows XP/Vista is running can help with this error. Update your BIOS may also help.

  Here is a workaround that can also help:
  http://www.SevenForums.com/installation-setup/2591-boot-error-code-5-a-2.html#post31719

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Directory services cannot start SBS2003 lsass.exe error?

  Hi all

  I have a SBS 2003 server who gave a customer who seems not to start windows.
  It gives 0xc000007a error code (Directory Services cannot start because the specified procedure could not be found).
  After finally the local Windows password reset, I am now faced with another problem, how to solve the problem I have for the first time to the difficulty.

  I've done some commands listed on the Microsoft article http://support.microsoft.com/kb/258062, nothing helped.

  I've already run the disk check, but it is impossible to run a repair on the installation because it shows the same error

  Does anyone know how to get the server to start successfully, without the need to reinstall Windows?

  System Spec: -.
  2 x Intel Xeon processors
  4 GB of DDR2 memory
  company 3x250GB WD HDD (Raid 5 with parity)
  Quantum Ultrium 2 tape drive

  Hello

  Thanks for your quick response to my post. I recently decided to reinstall the OS due to time constraints,

  Thank you

• cannot start a campaign bed error no data found for 03/01/1943

  HAVE RECENTLY REINSTALLED CFS3, BUT CAN'T START A CAMPAIGN MESSAGE IS DISPLAYS NO DATA FOUND FOR ALLIANCE FOR MARCH 1

  1943

  Hello

  Thanks for posting the request in the Microsoft community forums.
  I understand that you receive the error "no data available for the alliance for March 1 appears" when you start Combat Flight Simulator 3.
  Please answer the following question:

  What version of the operating system is installed on the computer?

  Try to follow the suggestions and check if you can start Combat Flight Simulator 3.

  Method 1:
  The link below doesn't have any information on the compatibility of the game with Windows 7.
  http://www.microsoft.com/en-us/windows/compatibility/win7/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win7&Locale=en-us&TextSearch=Combat%2BFlight%2BSimulator%2B3&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  If the game is not compatible with Windows 7, then you try to install the game in compatibility mode and check:
  Make older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Method 2:
  If the problem persists you can then put the computer to boot and try to install the game and check if that helps.

  To do this, follow the steps in this link:

  http://support.Microsoft.com/kb/929135

  Note: After the adventures of shooting set the computer to start as usual by performing step 3 above to the Knowledge Base article.

  Hope the information is useful. If you need help with Combat Flight Simulator 3, feel free to post you question in the forum. We will be happy to help you.

• Windows cannot start due to software error: load needed for dll Kerneal

  Okay so a few minutes before I started to write this question I have connected my Xbox 360 controller to my computer. When I did the connection popup Wizard and asked to check the updates of windows to the right files to download to the controller. After that, he finds the correct files and downloaded said files. He then asked me to restart my computer for the software could take effect. Well, after that I did the error message, it's in the title, came on the screen and now my computer will not pass this error.

  Also I know you hear this is a lot but, honestly its really annoying that you don't have a phone number on your website

  MS10-047: vulnerability in Windows kernel could allow elevation of privilege

  http://support.Microsoft.com/kb/981852>

  The repeated failures to install KB981852 suggest very strongly that you see the effects of a rootkit infection W32/Alureon-Variant!

  Following the instructions on this site should help you:

  http://www.bleepingcomputer.com/virus-removal/remove-TDSS-tdl3-Alureon-rootkit-using-TDSSKiller>

  ~ or ~.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/>

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx>

  For enterprise customers, support for security updates is available through your usual support contacts.

• Cannot start Windows Defender getting error 0x8007042d

  I tried to turn on my windows Defender, but when I do I get this.   Error 0x8007042d service is not started because of the failure of log-0n. How can I fix it?

  toddtrb

  Verify that the following Services are running.

  "Windows Update" and "Windows Defender".  To join the Services type services.msc in the start / run box.

  Some anti virus programs can disable Windows Defender to avoid any conflict in operation together.  What anti-virus software are you running?

  Windows Defender and Microsoft Security Essentials
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/5309cb8d-02e1-40E8-974f-0dcedb9ab9fd

• computer laptop dv4 1430 cannot start window and recovery ERROR 1002

  Sorry my English not just

  I have a problem to start my laptop.

  OK, when I turn on the power it lunch START REPAIR > system recovery options > Next > Startup Repair is checking your system for ploblem >... long... when I select restart or shut down , but STILL go to > LUNCH new STARTUP REPAIR

  or when I choose the Recovery Manager >> System Recovery > factory image recovery > ERROR 1002 Please contact HP support...

  Now, I need to open the window and how to do it.

  Please take care of my issue and I hope you understand my question.

  Thank you very much

  Jak

  Hello

  This process will allow you to do a Vista repair disc. This isn't an installation disc, but will allow you to use the Vista Recovery Console that is available on commercial versions of Vista.

  Download the file from the link below.

  Vista 64-bit

  It is a zipped file.  If you do not have an extraction utility installed, download and install 7-Zip, when installed, right-click on the zipped folder, select extract files and then click Ok.  You should now see another folder containing the ISO file.

  You will need software to burn the ISO to a CD.  If you don't have that guy on the software installed, download and install ImgBurn and use it to burn the ISO to a CD.

  Once you have created the Vista repair disk, follow the guide on the link below to see if it undertakes to repair your installation - you may need to run this several times.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html#

  Kind regards

  DP - K

• Cannot start the computer, the error message "Reboot and Select proper Boot device or Insert Boot Media in selected boot device and press a key any."

  Original title: can't access my BIOS, but blocked on select boot device

  I have a laptop Toshiba Satellite Pro. I gave up some time ago and removed the HARD drive to see if has been affected by the decline, as that was my first thought. "When turned on the laptop back, the error message:" Reboot and select clean boot device or Insert Boot Media in selected boot device and press a key. My HARD drive is installed correctly, that am a qualified technician. The laptop goes directly to this error message, when turned on, so cnnot access to the BIOS. Help, please.

  Hi Ryan,

  Please contact Microsoft Community. I will surely help you this question.

  To better understand the issue, let me know if you have tried pressing the F12 key or the key that is used to start the BIOS on the computer?

  Method 1:

  You may need to press the key (which is used to start-up the BIOS) as soon as you turn on your computer before Windows starts. See the article for more information.

  http://forums.Toshiba.com/T5/Windows-7-knowledge-base/how-to-enter-the-system-BIOS-on-Windows-7-computers/Ta-p/275629

  Method 2:

  If the problem persists, I suggest you to return the item and check if it helps.

  What can I do if my laptop Windows 7 or Windows Vista does not start?
  http://forums.Toshiba.com/T5/computer-troubleshooting/what-can-I-do-if-my-Windows-7-or-Windows-Vista-laptop-won-t/Ta-p/285717

  If the problem persists, I suggest you to contact the Toshiba Support for assistance.

  http://support.Toshiba.com/support/home

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Cannot start Windows Audio, 1740 error (0x800706cc: endpoint is a duplicate)

  Hello. I need help. I lost my audio a few days ago, and it seems weird. How has it happened? I noticed when I encounter a problem of Control Panel. When I open it, it won't load and it cannot be closed. The volume button on the task bar, said "The Service Audio does not work." I watched a video on how to solve it. I noticed, the multimedia class scheduler does not work. I started it with success. So now, I started the Windows Audio service, but a dialog box appears and says what is relative to the setting. Hoping for your reply.

  Hello

  Please refer to the answer of Babu V of this link.

  Kind regards.

• Cannot start Far Cry 4; error "the file version is not compatible with the version of Windows...". »

  * Original title: little problem!

  everytime I open far cry 4 or the instalastion of a graphics driver it shows like this... What can I do to solve this problem!

  If you don't do this there will be no more questions about what you have:

  Click on the button/ORB start in the lower left corner of your screen. Or, press the button of your keyboard Windows logo.

  In the type box:

  Msinfo32

  Select / click msinfo32.exe and the system information dialog box opens.

  Click System summary, click on edit, select all (Ctrl-A), copy (Ctrl-C) and then paste (Ctrl-V) the information back here in your next reply.

  For information about video drivers, expand components, click view, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) feedback here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

• Error "Cannot start service bluetooth stack" whenever I restart my computer.

  Original title: I have Windows 7 and have a "cannot start service bluetooth stack" error message whenever I restart my computer.  Can you help me solve this problem?

  I have Windows 7 and you have a "cannot start service bluetooth stack" error message whenever I restart my computer.  Can you help me solve this problem?

  Hello

  You did it all changes before the show?

  Method 1: Manually start the Bluetooth service.

  a. Click Start, type services.msc and press to enter.
  b. in the list of components, double-click Bluetooth support Service.
  c. change the startup type to automatic and click on the Start button to start the service.
  d. click on apply and then click ok.
  e. check if the problem persists.

  Method 2: Put the computer to boot and see if that helps:

  A clean boot to check if startup item or services to third-party application is causing this issue.

  Reference: How to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.

• Cannot start the peer name resolution protocol Protocol

  No p2p service means no homegroup, which means no access to other computers or to the wireless printer... He worked a few months ago, and now, the protocol name resolution by peers, well defined to automatic, does not start, even if I click on properties, etc. and ask him to startr. I have ' windows cannot start the Protocol PNRP, error 0 x 80630203.»

  I still have unresolved problems with backups, so I don't want a new installation of windows.
  I'm getting so fed up with all the unsolved problems of windows! is windows 8 is going to be better?
  Thanks for your help.

  Hello

  Please keep us updated.

  You can read the articles below and see if it helps:

   

  Add a device or computer to a network

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

   

  Share files via public folders

  http://Windows.Microsoft.com/en-us/Windows7/share-files-using-the-public-folders

  If you need further assistance, please answer and we will be happy to help you.

• The Philips SPA5210 bar: this device cannot start. (Code 10)

  Hi all

  I have a brand new Philips Soundbar which does not work.  Running Windows 7 Professional 64 bit and try to use the audio driver generic usb (which is what suggests Philips).  I get the dreaded "this device cannot start. (Code 10) "error.

  This unit works very well on my Linux box, so I know that its hardware functional.  If anyone can help with this?

  Thank you very much

  Brian

  
  

  Hi Brian Matheson,.

  It is possible that the Soundbar is perhaps not compatible with Windows 7 64 bit operating system.

  Check out the link here and open the user manual where it does not list Windows 7 in system requirements.

  If it works, try the step below and check out them.

  1. click on Control Panel.

  2. double-click on the sounds and Audio devices icon.

  3. in sounds and Audio devices

  1 properties, select the Audio tab.

  2. under sound playback, select Philips SPA5210.

  If the previous step fails, then try to connect to it on the other USB port and check.

  If you have Windows 7 32 bit on another PC, check if the Soundbar works.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• This device cannot start. (Code 10) with a hard usb pen and readers for windows 7

  Recently, I used acronis true image to migrate my hard drive to an ssd from 250 to 500, the problem is on the new drive I get "this device cannot start. (Code 10) "error every time I try to use a USB key or external hard drive on the new image, the old image is fine. I tried all the usual alternatives to surf the web;

  Reset

  Re-creating image several times.

  uninstall all the usb drivers on Device Manager Associates,

  update drivers,

  using the microsoft error fix program (fails to answer to find bespoke online solutions).

  Any help would be useful.

  Kind regards.

  Hello Scott,

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with USB devices in the computer.

  I would like to know some more information on this issue to help you better.

  (1) that Microsoft fix program error have tried?

  (2) remember to make changes to the computer, before this problem?

  In the meantime, you can try to follow the following suggestions to solve the problem.

  Actually code 10 occurs mainly because of devices and hardware driver issues or because of compatibility problems between the drivers of equipment and additional software that is installed on the windows.

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  http://support.Microsoft.com/kb/943104/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Registry backup
  http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you.

  Thank you