Cannot start Windows Audio, 1740 error (0x800706cc: endpoint is a duplicate)

Similar Questions

• No sound, cannot start Windows Audio Endpoint Builder service, RPC server not available

  I had the audio works fine, so I checked a few services that are sure to value manual, and now I have problems with my audio. I went to all the necessary services that should be started and all have the value automatic and running except for the Audio service of builder endpoint, windows audio service and service audio creative.

  When you try to start the audio endpoint Builder service windows I get error 1722: the RPC server is unavailable.

  I can't start the service windows audio either. I get an error 1068: the dependency service or group could start.
  I tried to change the local system account log in info and now I get a different error message: 1079 the account specified for this service is different from the account specified for other services running in the same process.
  I tried to uninstall my sound card drivers (creative audigy 2), my pilots on board her (AC97) then reinstalling both, no chance.

  I am running Win 7 Ultimate 64

  I am also having a problem with my USB keyboard goes dead. the backlight stays on, but none of the buttons will respond. I have to unplug the USB and use it to hold back in order to reinstall. It seems that if I do not use the keyboard for a while it turns off, but the lighting. I disabled in the power of USB energy saving profile, and the problem persists. My mouse does not turn, so I think it is not related to my power profile. It's a keyboard Saitek Gamers (USB).

  Any help would be appreciated.
  Thank you
  Alex

  ETA *.

  DCOM Server process Launcher started, automatic
  Plug-and-Play started, automatic
  Multimedia class Scheduler started, automatic
  Remote procedure call (RPC) started, automatic
  Windows Audio Endpoint Builder not started, automatic (error message 1722)

  Update #2 that I was able to get the right connection info to get rid of the error msg 1079.
  I typed in NT AUTHORITY\LocalService and left the empty password.
  now, I get the same msg of error as a generator of endpoint... RPC server is unavailable.

  Edit # 3
  I turned on the power and everything started working as usual.
  except that I still have the problem of keyboard.
  Thank you

  I guess the problem with the Windows Audio endpoint builder, it's that you have disabled the Windows on Windows 7 power management.  For some reason, the audio services cannot start if power management is disabled.

  I was going to install the software for my UPS APC power management and requires that the Windows power management is disabled.  I disabled the service and rebooted the system and noticed that the audio services is not started.  You try to start their hand gave the errors you mentioned.  When I started the service of power management, I was able to start audio services.

  Microsoft does not mark as services that depend on it, but there is a relationship.  I know that in Windows 7, which they said he optimized use of energy for the audio and I guess audio services are looking at power management to see what type of profile is in use.  Because power management does not work, it is unavailable and terminate the audio services.  Again, this is just a guess, and I can't find definitive answers to this topic.

• Cannot start Windows Defender getting error 0x8007042d

  I tried to turn on my windows Defender, but when I do I get this.   Error 0x8007042d service is not started because of the failure of log-0n. How can I fix it?

  toddtrb

  Verify that the following Services are running.

  "Windows Update" and "Windows Defender".  To join the Services type services.msc in the start / run box.

  Some anti virus programs can disable Windows Defender to avoid any conflict in operation together.  What anti-virus software are you running?

  Windows Defender and Microsoft Security Essentials
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/5309cb8d-02e1-40E8-974f-0dcedb9ab9fd

• computer laptop dv4 1430 cannot start window and recovery ERROR 1002

  Sorry my English not just

  I have a problem to start my laptop.

  OK, when I turn on the power it lunch START REPAIR > system recovery options > Next > Startup Repair is checking your system for ploblem >... long... when I select restart or shut down , but STILL go to > LUNCH new STARTUP REPAIR

  or when I choose the Recovery Manager >> System Recovery > factory image recovery > ERROR 1002 Please contact HP support...

  Now, I need to open the window and how to do it.

  Please take care of my issue and I hope you understand my question.

  Thank you very much

  Jak

  Hello

  This process will allow you to do a Vista repair disc. This isn't an installation disc, but will allow you to use the Vista Recovery Console that is available on commercial versions of Vista.

  Download the file from the link below.

  Vista 64-bit

  It is a zipped file.  If you do not have an extraction utility installed, download and install 7-Zip, when installed, right-click on the zipped folder, select extract files and then click Ok.  You should now see another folder containing the ISO file.

  You will need software to burn the ISO to a CD.  If you don't have that guy on the software installed, download and install ImgBurn and use it to burn the ISO to a CD.

  Once you have created the Vista repair disk, follow the guide on the link below to see if it undertakes to repair your installation - you may need to run this several times.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html#

  Kind regards

  DP - K

• ERROR 0x800706cc endpoint is duplicated

  To who may it concern;

  my computer came with the same 'ERROR 0x800706cc endpoint is a duplicate.

  I tried all of your ideas, but the error still to come.

  Please advise on what can what to do next.

  waiting for your response.

  Thank you.

  Hello

  I understand the inconvenience you encountered.

  I would be grateful if you can provide us with the following information to help us better understand the question?

  1. When you receive this error code or error message?
  2. Have you made changes on the computer before this problem?

  Also provide us newspapers in Event Viewer so that we can check for the exact error and the cause of the problem.

  To provide logs of the events, please follow the steps below mention.

  1. Press Windows + X

  2. Select Panel.

  3. Click then on system & security.

  4. Click Administrative Tools , and then click Event Viewer.

  Important: If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Note: Event logs are special files events important folders on your computer, for example when a user connects to the computer or when a program encounters an error. As soon as these types of events occur, Windows records the event in an event log that you can read by using Event Viewer.

  Please respond with more information on this issue, so that we can better help you.

• Get error 0x800106ba and cannot start Windows Defender

  Cannot start windows defender after installing Miicrosoft Security Essentials

  MSE disables Windows Defender from Vista:

  Microsoft Security Essentials has its own integrated version of the defender and it automatically disables the version of Vista in Windows Defender.

  If it's not:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Turn Windows Defender on or off the information on the link above of Microsoft.

  Hope the foregoing explains the compatibility issues with Windows Defender and MSE.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite A660-158 - cannot start Windows

  Toshiba Satellite A660-158

  I bought a laptop Toshiba Satellite A660-158. It has served me less than a week. I think it's the broken hard drive.

  My problem:
  Once I start the computer, it started and has worked for a while, but suddenly, there was an error reading that I didn't have the time. Computer has been restarted. And does not load... Until the boot mode does not reach. But the initial test (with logo) succeeded. Takes a long time and finally gives an error:
  -----
  Cannot start Windows. Maybe it was because of the recent small difference is the hardware or software configuration. To fix this error:
  1. Insert your Windows installation disc, restart the computer (the complete transmission wasn't)
  2. choose the language settings, and then click Next.
  3. Select "repair your computer".
  If this disk is missing, contact your system administrator or computer manufacturer (he turned and said to wear to the DEPOT, but I do not have this feature).

  Status: 0xc000000e

  Details: Unable to start menu, since the required device is inaccessible.
  -----
  Please help me! Idon't know what make me)
  Please write to E-Mail: [email protected]

  Post edited by: HunterS7777777

  Hey,.

  And why do you think the hard drive is faulty?
  Have you ever tried the repair your computer option? Usually with this option you can restore factory in a few minutes.

  Also if you have the Toshiba recovery disc you can also restore the factory of this disc. Just boot from it and follow the instructions on the screen. You need to do a few clicks only, installation with all the drivers and tools happen automatically.

  If you have any other questions, please let us know! :)

• Satellite L40 - cannot start Windows

  Hello

  hope you can help, my computer Toshibal L40 laptop on commissioning began by displaying the following error message:

  * "Cannot start Windows. a recent change in the software hardware might be causing... » *

  It offers the possibility of:
  "* Launch Startup Repair option" * "

  I chose this. WIndows seems to load up, but then I get the following error message:

  Installed program cannot start. Click OK to turn off the computer *.

  I lost the recovery disk, but attempted to load the recovery console by using a windows XP disk, but it gave me error message more. Advice would be very welcome.

  For the installation of Vista you don't need SATA driver but for Windows XP Home edition you need. Is no problem at all.

  The question is what you want to do now? If you want to use Vista just use recovery media and you will have factory again.
  No problem at all.

• Cannot start Windows, Windows Setup does not detect the hard disk, Bootmgr is misiing

  I have a few problems on my laptop [Acer 3810 t]

  -The first problem
  My mobile give me screen "cannot start windows' who have 2 choices: run the Startup Repair tool and boot normally. I chose to fix it, but nothing happens and stuck "starting windows" and gives unmountable boot volume 'blue screen '. the Dungeon of blues screen appear (for laptop is a not restart). So I turned off my phone and turn it back on it. the "could not start" screen again and I chose to start normally. but the result is negative. My portable Dungeon cannot start windows. Because of that I am using the advanced boot option and choose all the boot type such asit cannot load the safemode, last configuration etc, but the result is the same, you cannot start windows. in safe mode, its stuck in loading fileinfo.sys. I do not give up to try again with the advanced boot option. until I have a bad situation. My laptop can only 1 file in safe mode and blues screen do not appear again (my laptop only return at the beginning of start or restart)

  -The second problem
  because it cant solved, I want to reinstall my laptop. My OS is Vista 32 bit (pre-installed). I want to install the new operating system, windows 7. I use Dsik Flash bootable USB to install Windows 7. But in the BIOS, it is detected as a USB HDD. So I set my BIOS to load USB HDD to the first order. the installation can be done, but only until the "start Setup" screen and its deadlock. I have it wait up to an hour, but nothing happens. So I'm going to BIOS, change SATA mode to IDE mode AHCI. Then load the USB and go "installation program start screen. but the new problem is the installation of window does not detect my hard drive. So I can not choose the place to install the operating system. I have to load the driver, but I did not. Again to load the configuration to AHCI and IDE, until I get my HDD can detected in IDE mode. So I think I can move easily, I choose custom installation and choose the hard drive to install the operating system. But unfortunately, at the beginning of the process, after choosing the OS, the Installer gives error if installation location the installation failed. (I forgot the error message)

  -The third problem
  So far, I can't spend 'startup begins' as well in mode IDE and AHCI. Also bootmgr in my hard disk is missing, so I can't go to move the startup repair or the startup option in my HDD as before

  What is the error code that you got with blue screen?

  I think that there is a problem with your drive HARD check that by contacting acer...

• Cannot start Windows Virtual PC host process. Check the log of the events system for more details

  Hello

  I am running Win 7 Home Premium 64 and seek to install Windows XP Mode Virtual PC.

  I followed the instructions at: http://www.microsoft.com/windows/virtual-pc/download.aspx and receive the following:

  "Windows Virtual PC. Cannot start Windows Virtual PC host process. Check the log of the events system for more details".

  He does not point me to the "system event log", but he leaves me here. Any advice?

  Thank you

  Hello

  Ideally, this error message indicates that your processor does not support the against hepatitis a (hardware support for virtualization)function.

  Cause:

  Windows Virtual PC and Windows XP Mode are supported only on computers whose CPUs are the HAV feature is enabled. Therefore, if your processor does not support the functionality of HAV or if this feature is disabled, you cannot start the virtual machines in Windows Virtual PC.

  To resolve this problem, follow the steps mentioned in the link below

  Error message about Virtualization-aided material for Windows XP Mode in Windows Virtual PC on a computer that is running Windows 7

  http://support.Microsoft.com/kb/977206

• Cannot start from the CD: Error Code 5. __Asking driver primary IDE channel.

  I install a new copy of windows 7 on my old computer. My computer have no major problems from Advisor Windows 7 report. When the system boots on the DVD I got the error message cannot START FROM the CD: error 5 CODE. Also, I can't start XP installation. When I get to the part on which partition to install I got the message to load a driver. He asks me to load a driver for the MAIN IDE CHANNEL. I have search on Intel, Gigabyte and other internet sites but have not found a specific driver.
  My computer is:
  Processor Intel P4 1.7Ghz
  15 GB OF RAM
  GeForce 7600GS
  320 GB IDE HARD DRIVE
  Card mother Gigabyte GA-8ITX3
  Intel 820 Chipset family with 82801BA (ICH2) I/O controller.

  Help, please!

  P.S. noticed that 2Angel had a similar problem but no solution.

  Error code 5 - can't boot from DVD

  Some people have reported that from the installation of Windows 7 so that Windows XP/Vista is running can help with this error. Update your BIOS may also help.

  Here is a workaround that can also help:
  http://www.SevenForums.com/installation-setup/2591-boot-error-code-5-a-2.html#post31719

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• I'm unable to start Windows Security Center "error 193: 0xc1»

  Original title: I cannot start Windows Security Center

  Hello

  I manage not to launch Windows Security Center, I use windows 7 64-bit.
  I go to services and local services-click and scroll down to Security Center, I then click on highlight, then click Start, I get a loading bar but then an error message that reads: error 193: 0xc1
  How can I get the business to start?
  Thank you very much
  Nick

  Hello

  You did changes to the computer before the show?

  Method 1:  SFC scanner.

  System File Checker (SFC) scan will replace the missing or corrupted system files on your computer.

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files:

  http://support.Microsoft.com/kb/929833

   

  Method 2: I suggest you make a system full scan just to be sure.

  Here is a link that will give you information on how to perform a full scan of the system:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Satellite L300-19F starts not-cannot start Windows

  My mobile no dΘmarre, "cannot start Windows. "To solve the problem: restart with the recovery CD.

  I can do that, but first of all, I don't want to try to save the data (and photos) from a hard disk.
  Is it possible, for example, go to BACK when booting with the recovery CD, and copy the data on USB?

  Furthermore, all my data on E:\ partition. Will be crushed it during the installation of recovery?

  Please notify. Kind regards.

  > Is it possible, for example, go to BACK when booting with the recovery CD, and copy the data on USB?
  No, it is not possible!
  If you should start up using recovery disc then the recovery process would be started and the whole HARD disk may be formatted!

  You can try to start by using a WinPE
  http://www.LiveCD.com/

  This allows you to start the device and access the data on the HARD drive

  You could also build own Windows live CD
  Check this box:
  http://www.MakeUseOf.com/tag/how-to-create-your-own-custom-Windows-Live-CD/

• Acer aspier L5100 cannot start windows

  Hi, my Acer Aspire L5100 SNID [under the direction of privacy] now cannot start windows.

  Blue screen, status of the Boot Manager Oxc000000f

  required unit is not available.

  I don't have the drive to victory, what to do now?

  Advice from someone...

  probably corrupted file BCD.

  What is your operating system?

• Cannot download windows XP SP3 error 0 x 80244018. How should I do? Ousseni Pal (_ @_. _)

  Cannot download windows XP SP3 error 0 x 80244018. How should I do? Ousseni Pal (* address email is removed from the privacy *)

  I tried this time also it could not be installed and the error code is 0x80004005.

  Please notify.

  Hi ousseni,.

  See the following article to find out how to install Windows XP Service Pack 3.

  Steps to take before you install Windows XP Service Pack 3

  See also:

  How to troubleshoot an installation fails on Windows XP Service Pack 3