my pc configuration-1015 MB of ram, 2.5 ghz processor, 320 GB HDD, win xp sp3. I want to switch to win 7, please help

Similar Questions

• What is the configuration of the maximum ram for a 2007 iMac 21,5 "

  What is the configuration of the maximum ram for a 2007 iMac 21,5 "

  There is no such thing as a 2007 21.5-inch iMac; the 2007 iMac is all 20 or 24 inches. Click here and search for your model; the page it will say.

  (141476)

• I can NOT connect my Facebook account to make Yahtzee can access my contacts. He said that Facebook is not configured on this phone. ??? I have also a certificate has expired and do NOT know how to get a certificate of update. ?  Please Help, I have NOT b

  I can NOT connect my Facebook account to make Yahtzee can access my contacts. He said that Facebook is not configured on this phone. ??? What this mean and how can I solve this problem? I have also a certificate has expired and do NOT know how to get a certificate of update. ?  Please Help, I have NOT been able to get help from any of these Issuea. Very frustrated. Please contact me by txt on my iPhone 352-257-9403 if possible. Thank you for your support

  iOS 9.2.1

  certificate is daily horoscope

  wwhat the devil is and why it has expired?

• Pavilion 15-b162sr Sleekbook: Maximum amount of RAM to my laptop. Please help me.

  Hello.
  
  I have two questions. I want to improve my laptop.
  
  1. I put in my laptop RAM-DDR3-1600 (800 MHz)?
  
  2 and how I can put in my laptop?
  
  I read the manual here on the site, but I couldn't find out the maximum amount of RAM. If its why I write this here. Please help me. Its very important for me.
  
  Best regards, Stas.

  Model #: E3D25EA
  
  Serial No.: [personal information]

  You have a single 4 GB module and it will take up to 2 x 8 modules for a total of 16 concerts concert. This is the reference number:

  Memory modules (two, DDR3 - 1600 MHz PC3-12800): ● 8 GB 693374-005

  Here is the Manual:

  Manual

  'How to' on memory is the p. 69. Add more memory will jeopardize the warranty and will require the removal of the motherboard, which is not easy.

  It's memory:

  https://www.Amazon.com/Kingston-Technology-1600MHz-PC3-12800-KVR16LS11/DP/B00CQ35HBQ/ref=sr_1_1?ie=UTF8 & qid = 1466602307 & SR = 8-1 & Keywords = 693374-005

  It's low-voltage DDR3L-1600 1.35 volts and it should be low density 8 black blocks per side.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Application has failed to start because its side-by-side configuration is incorrect? Please help me!

  Hello world

  I just got the new Sims 3, I installed and uninstalled several times, but every time I get the same message came 'the Launcher of the sims 3 has stopped working ".
  I checked the updates, defragmentation and tried again but no joy. In addition, the system requirements exceeds the requirements of the game.
  I spoke to someone on the EA forum and they suggested to the launcher and simply load the game, so I tried this and now I get "the application failed to start because its configuration side by side is incorrect. check the log of events applications for more information. »

  In all honesty doesn't mean a lot to me, I tried to get help from EA, but they do not respond, I hope experts can help me, it would be much appreciated.
  EM

  Hello Emma,

  Thank you for posting.  As a gamer, I have an idea of what might happen.  It seems that the configuration file for the game is not correct or may be corrupt.  Unfortunately only EA support for the Sims 3 can really help you with this problem.  I suggest that you stay in control of their forums or contact their support team.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I would like to install Windows XP on my computer and get rid of the Vista operating system. Can I do this? I only have 512 MB of Ram and 32-bit processor.

  Windows XP instead of Vista.

  I would like to install Windows XP on my computer and get rid of the Vista operating system.  Can I do this?  I only have 512 MB of Ram and 32-bit processor.

  Hello

  There are a few things that you would have to do to install XP instead of Vista:

  1. contact the manufacturer of your computer and see if the XP drivers are available for your computer model to make sure that XP has worked properly in this regard.

  2. If the XP Drivers are available, buy a XP disk operating system / license. Try local computer repair shops because Microsoft sells more than XP and online sale buy you pirated copies can cause. Be very careful.

  3 XP runs with 512 MB of RAM, although a little slow by today's standards.

  4. do a clean install of XP. Make sure that all your data is backed up as the hard will be cleaned of everything during the Installation of XP.

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  Here is some information that you would like to learn more about improving the performance of Vista using ReadyBoost, you have only the minimum amount of RAM to run Vista:

  http://www.bleepingcomputer.com/tutorials/using-Windows-ReadyBoost-to-increase-performance/

  See you soon.

• Please help to configure the router for internet connection 871W!

  Hello world!

  I just started styding for CCNA, so I'm totally new to Cisco stuff. Recently bought a router 871W and spent two days in a row trying to configure internet connection with no luck! I use the port console for the configs and SDM/CCP. Would be greateful if someone could tell me how to do simple configs of internet connection. I googled everything but it's still confusing. I can't assing all-IP ports FA 0-3. I used instead of the VLAN. But all tutorials use FA0 and when I try to assign an IP address to FA0 it gives me some L2 cannot be assigned or something... :/ And I am also confused at what address IP use for WAN.

  I connected the cable between the Modem and the LAN of the PC port and copied some IP addresses which I think I have to use to configure the router for internet connection. And here they are:

  ISP IP: 76.114.54.255

  SUBNET: 255.255.248.0

  GATEWAY: 76.114.48.1

  DHCP: 69.252.97.4

  DNS: 75.75.75.75

  75.75.76.76

  If you can, please help! Thank you!

  Hi david,

  Looks like your 871w can not get a dynamic IP address: % unknown DHCP problem... No possible allocation

  you could ask your ISP to perform a reset/clear MAC add and try again?

  also, kindly post lastest "show run".

  Edit: just to see you've updated your screenshot. could you add command under 4

  Mac-add 0001.4af9.8b83

• Hi I HAV a question... I use PS cs6 m having major problem can you please help me... whenever I have use the filter on sumthng Gallery or if I use a Quick Selection over all things low RAm error levonorgestrol tool... Although I have a huge memory?

  Hi I HAV a question... I use PS cs6 m having major problem can you please help me... whenever I have use the filter on sumthng Gallery or if I use a Quick Selection over all things low RAm error levonorgestrol tool... Although I have a huge memory?

  
  

• VIP - ANALYZE Configuration Issues - Please help!

  Hello world
  
  First of all I ask you guys to Please HELP SOLVE ME THIS PROBLEM – thank you!
  
  I am installing grid Infrastructure Oracle 11 g 2 11.0.2.0.3 on Oracle Solaris 11.11 x 86 64 bit installed using Live Media on Oracle VirtualBox 4.2.6.
  
  After you have configured the nodes in the cluster, I ran the cluster verification utility that came out with 100% success.
  
  However, during root.sh run, I get the following error:
  
  /U01/app/11.2.0/grid/root.sh
  --------------------------------------------------
  CRS-4266: Vote or managed to replace the files
  # File group universal name Id disk STATE file
  -- ----- ----------------- --------- ---------
  1. online 4a3543261bc34fc9bf6e41b5d7fa04c8 (/ dev/rdsk/c8t2d0s1) [OCR]
  Located at 1 vote (s) disk.
  CRS-2672: attempt to start 'ora.asm' on 'sol1.
  CRS-2676: beginning of "ora.asm", the successful "sol1"
  CRS-2672: attempt to start ' ora. OCR.dg' on 'sol1.
  CRS-2676: beginning with ' ora. OCR.dg' on 'sol1' successful
  /U01/app/11.2.0/grid/bin/srvctl start applications sol1 - n... failed
  FirstNode configuration failed on line /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm 9196.
  /U01/app/11.2.0/grid/Perl/bin/perl-I/U01/app/11.2.0/grid/Perl/lib-I/U01/app/11.2.0/grid/CRS/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
  
  I have re-run this command to see the real errors
  
  /U01/app/11.2.0/grid/bin/srvctl start applications sol1 - n
  ------------------------------------------------------------------------------------
  RPRC-1013: failed to start of ora.net1.network resources
  RPRC-1064: failed to start of ora.net1.network on node sol1 resources
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  RPRC-1079: failed to start of ora.sol1.vip resources
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to place the "ora.sol1.vip" resource on which will achieve its investment policy
  RPRC-1013: failed to start of ora.ons resources
  RPRC-1064: failed to start of ora.ons on node sol1 resources
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  
  
  I ran the following commands to know the State of SAN and SCAN-headphones
  
  srvctl status scan
  --------------------------------
  VIP scan1 SCAN is enabled
  Scan1 VIP SCAN does not work
  VIP SCAN scan2 is enabled
  Scan2 VIP SCAN does not work
  SCAN VIP Scan3 is enabled
  Scan3 VIP SCAN does not work
  
  srvctl status scan_listener
  --------------------------------------------
  LISTENER_SCAN1 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan1 is not running
  LISTENER_SCAN2 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan2 is not running
  LISTENER_SCAN3 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan3 is not running
  
  srvctl config scan_listener
  ---------------------------------------------
  LISTENER_SCAN1 listener SCAN exists. Port: TCP:1521
  LISTENER_SCAN2 listener SCAN exists. Port: TCP:1521
  LISTENER_SCAN3 listener SCAN exists. Port: TCP:1521
  
  
  Here is the content of my/etc/hosts and /etc/resolv.conf files
  
  cat/etc/hosts
  -----------------------------
  # Public
  192.168.56.101 sol1.localdomain loghost sol1
  192.168.56.102 sol2.localdomain sol2
  192.168.56.160 solfiler solfiler.localdomain
  
  # VIP
  192.168.56.111 sol1-vip sol1 - vip.localdomain
  192.168.56.112 sol2-vip sol2 - vip.localdomain
  
  # Private interconnection
  192.168.0.101 sol1-priv sol1 - priv.localdomain
  192.168.0.102 sol2-priv sol2 - priv.localdomain
  
  # Scan
  #192.168.56.201 ground-sweeping ground - scan.localdomain
  #192.168.56.202 ground-sweeping ground - scan.localdomain
  #192.168.56.203 ground-sweeping ground - scan.localdomain
  
  
  cat /etc/resolv.conf
  ------------------------------------
  #
  # AUTOMATICALLY generatedFROM_SMF_V1_
  #
  # ATTENTION: THIS FILE GENERATED FROM SMF DATA.
  # DO NOT EDIT THIS FILE. CHANGES WILL BE LOST.
  # See /etc/resolv.conf (4) for more details.
  
  Search localdomain
  nameserver 192.168.56.101
  nameserver 192.168.56.102
  nameserver 192.168.1.1
  
  
  Here are the details of the network
  
  dladm show-phys
  ----------------------------------
  MEDIA SPEED DUPLEX LINK
  Net1 Ethernet up to 1000 complete e1000g1
  NET2 Ethernet up to 1000 full e1000g2
  Net0 Ethernet up to 1000 complete e1000g0
  
  ipadm show-addr
  ---------------------------------
  ADDROBJ TYPE STATE ADDR
  127.0.0.1/8 ok static lo0/v4
  Net0/v4 dhcp ok 10.0.2.15/24
  Net1/addr static 192.168.56.101/24 ok
  NET2/addr static 192.168.0.101/24 ok
  OK static lo0/v6: 1/128
  Net0/v6 addrconf ok fe80::a00:27ff:fe5f:f484 / 10
  
  
  I did the nslookup on my name SCAN
  
  Nslookup ground-scan
  ----------------------------------
  Name: sol - scan.localdomain
  Address: 192.168.56.202
  Name: sol - scan.localdomain
  Address: 192.168.56.203
  Name: sol - scan.localdomain
  Address: 192.168.56.201
  
  I ran the following commands to see if the installation process correctly reads my SCANNING configuration
  
  srvctl stop scan_listener
  srvctl stop scan
  
  srvctl config scan
  -----------------------------
  SCAN name: ground-scan, network: 1/192.168.56.0/255.255.255.0/net1
  SCAN VIP name: scan1, IP: /sol-scan/192.168.56.203
  SCAN VIP name: scan2, IP: /sol-scan/192.168.56.201
  SCAN VIP name: scan3, IP: /sol-scan/192.168.56.202
  
  So it's good reading ANALYSIS information there is so no problem
  
  I tried to start listeners to SWEEP and ended up with the same mistakes
  
  srvctl start scan_listener
  ------------------------------------------
  RPRC-1079: could not start the ora of the resource. LISTENER_SCAN1. LSNR
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to put the resources ' ora. LISTENER_SCAN1. LSNR' on which would meet its investment policy
  RPRC-1079: could not start the ora of the resource. LISTENER_SCAN2. LSNR
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to put the resources ' ora. LISTENER_SCAN2. LSNR' on which would meet its investment policy
  RPRC-1079: could not start the ora of the resource. LISTENER_SCAN3. LSNR
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to put the resources ' ora. LISTENER_SCAN3. LSNR' on which would meet its investment policy
  
  If it helps, I use automatic network default Solaris 11.11 management but I changed IP addresses of net1 and net2 manually to meet my network
  Requirements for the clusterware.
  
  I followed all the steps of the system requirements for installing under solaris 11.
  
  After checking everything I could have as detailed above, I'm now helpless as to where things go wrong
  
  What is automatic 11.11 Solaris network management that does not allow the creation of addresses IP SCAN VIP?
  
  Once again I ASK YOU GUYS to Please HELP me THIS PROBLEM FIX.
  
  Concerning
  Terry.

  Hello

  the problem is the host name of the server is resolved is on the 10.X.X.X network.
  For example, the cluster requires the public network to be on this network. And the error you get, because this network is on DHCP.

  If you have the following options that you can try:
  a.) change the server to have the host name to resolve to the 192.X network
  (b) change the order of the network adapters
  (c.) remove the network 10.X.X.X at the moment of installation

  Concerning
  Sebastian

• Hello. I need help developing a PowerCli script that will show me the current configuration of the video Ram of each individual virtual machine on a host\cluster or a vcenter. Can you help me?

  I have a script that will allow me to change the configurations of VRAM, but I need a script that retrieves the configuration of all virtual machines VRAM in my infrastructure.
  I need to get out information to a csv file and run this report on a monthly basis... can you help me?

  Right now my environment is mixed. I have Windows XP virtual machines set to 4 MB, Windows 7 virtual computers set to 8 MB and a subset of sall of virtual machines set to automatic detection of settings.

  I need to be able to recover these settings in a CSV file in order to use this information for comparisons of trdouble-shot performance issues...

  Thank you.

  

  Try something like this

  Get - VM |

  Select Name,

  @{N = "OS"; E={$_. ExtensionData.Config.GuestFullName}},

  @{N = "VideoRamMB"; E = {}

  [math]: Round (($_.)) ExtensionData.Config.Hardware.Device |

  where {$_-is [VMware.Vim.VirtualMachineVideoCard]} |

  (Select VideoRamSizeInKB - ExpandProperty) / 1 Ko, 1).

  }} |

  Export-Csv vm - videoram.csv - NoTypeInformation - UseCulture

• CC 7100 cmt: questions upgrade ram cmt dc 7100 (please help)

  Hey all,.
  There is history... or you can just go to the section "cut to the Chase" to the bottom of the post

  The long story...
  my name is chris, and I'm trying to help a 14-year-old son, friends learn a lil more on his old pc.

  his pc has a hand and is obviously outdated, I got a bunch of old carcasses of office and let him rumage anything that would contribute to his pc. We found a total of 3 GB of ram ddr400mhz which is just below its limit of 4 GB machines.

  so I thought everything would go smoothly, it is certainly not my first ram upgrade, having built many of the old desktop computers it was inflict through, I consider myself pretty well informed on the pc and have renovated a lot of pc, same Freelancer my skills of mechanics and tokens for a lil extra cash on the side I have dealt with many a problem, repair and upgrade, since I took my first windows machine in 2000, before that I started with a commodore 64 and eventually got an apple iic when I was about 10 years old... anyway, what im getting here, is I USED to know my s#@t, but for some reason any It's evading me and google isn't offering anything on the subject.

  We planned on him to update to sp3 after have modernized their equipment as much as we can, while at the same time educate him as much as I could about how the computer worked, how to open and how to treat the components inside, it was the first time, he had never looked inside his machine or any machine besides...

  However, because of delays and the issue with the ram does not, I eventually send him home with the same stock set up, he brought to me.

  Cut to the Chase

  The problem here is that for some reason when I install 1, 2 or 3 the cards of ram 1 GB the machine do not post and triggers a series of beeps system, so obviously something isn't jiving, and I can't put my finger on it.
  I can use 1,2,3 or all 4 of his stock [256 MB ddr 400 mhz] ram cards and it will display and start with change messages memory clear system, however, when you use less than four of its ram slots, a message is launched upward during post, stating something to the effect of all the slots must contain the same amount of ram

  We are working on PC is a:
  HP DC 7100 CMT
  Windows XP SP2

  current installed RAM is [256 MB ddr 400 mhz] x 4 = a total of 1 GB

  tried to upgrade RAM parts:
  Ballistix [1 GB ddr 400 mhz] x 2 = a 2 GB total

  more

  Memory Dell [1 gb ddr] (mhz are not)

  I thought it was probably a bios thing and was about to investigate, but we ran out of time, now I'm tender hand to this community in the hope that someone here can indicate what it is I'm obviosly dominant, I really want to get his machine is upgraded because it is expessing a lot of interest in Unity3D , and scripts, ANDS I'd like see hiw cultivate these skills and I can't buy a machine, and he cannot afford a new machine, so the upgrade of its rigging with these old quarters would be the most ideal situations for him, if we cannot find out we will simply create a new rig out of my 'old' , but the 3.0 ghz core dou in his dc 7100 cmt processor is probably better than any of the alternatives in my attic... so yes this is my dilemma and I hope that some here is kind enough to point me in the right direction

  Thank you and best regards,
  Chris

  Hello:

  You must have the total amount of memory in slots 1 and 3 are the same, and the same quantity in slots 2 and 4.

  The PC will not work if you put 1 GB in slot 1, 1 GB in slot 2 and 1 GB in the Groove 3 because you're short 1 GB in the empty slot 4 and just short of 1 GB in slot 4 = 5 beeps.

  Then... If you do not have 4 x 1 GB then use 1 GB in slots 1 and 3 and 256 MB in slots 2 and 4.

  See the table below on page 16 memory configuration.

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04287187

• NEED TO CHANGE MY CONFIGURATION OF RAID 0, RAID 1. PLEASE HELP AS FOR HOW TO DO IT. URGENT!

  Hello!

  I had a glance but quite impossible to find the answers I was hoping to find.  I understand a fair bit about how works RAID and indeed when I ordered my computer, I ordered a RAID 1 configuration, but it arrived as a RAID 0 Configuration. In time, I left and wish later, I do not have, but at the time, I was in the middle of a heavy calendar of study...

  I have a computer processor i7 3 GHz with 8 GB 1333 MHz DDR3 RAM.  It's a few years old but has a bit of life left in it, so I would reconfigure if possible.  At present, it is implemented with DISK 0 have 3 partitions - a 118MB OEM partition, a partition RECOVERY from NTFS of 10,88 GB and a 1.8 to NTFS OS (c :)) Partition main, then 1 drive has a main 63 GB NTFS partition.)  It runs on W7.

  Of course, if I just start to change the sizes of disc autour, I lost the operating system and all and may end up with a metal box not able to do anything. so, where can I start and in what order I progress, please to reach a situation of RAID 1?  I have a complete set of diskettes to install W7 and want to update to 10 by Thursday.  I understand that I have to format the drives to break the current RAID configuration and get the good detection of both discs and am fully backed up, but I need to know in what order I am progressing.

  Any help would be welcome.  Looking forward to some responses!

  Burybellringer.

  Hello

  According to the description you want to change the configuration of RAID 0 to RAID 1 on the system.

  Certainly, I understand your concern.

  To get more information about it, we have a dedicated forum where these issues are dealt with and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the best support.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Please help me to adjust my current HARD drive configuration

  I posted this at the end of 'Guidelines for best record Setup' badly yesterday, but I think that the thread can be so long and so old my question is simply lost in the mix, so I'll go ahead and create a new post here.

  I read damage on the guidelines for the best drive configuration and its position during the installation of overhead storage for editing systems, and I have a few questions...

  First of all, I have a TON of data, much of that which I could probably check on own things upward. Here's what I have right now, and maybe you can give me some recommendations to fix things so it'll work better (my PPBM5 shows significant slowdown in the disc-land). FWIW, all internal hard drives are 7200 RPM SATA2.

  I have a WD 250 GB enterprise storage disk for my OS/programs, and I think it contains the swap file... (although I have 12 GB of Ram, so I don't know how many times it is used). This one is full of about 50%.

  I have a WD 500 GB enterprise storage drive that contains all of my graphics, photos and audio, as well as other generic data files (think documents, PDFs, etc here) it is about 60% full.

  I have a 1.0 TB WD Caviar Black for my projects/Scratch/Previews drive. This one is full of about 40%.

  I have a 2 TB RAID - 0 (from WD Enterprise storage drives 2 x 1.0TB) which contains all my data in whatever format it is arrived (most are direct capture of HDV in the first, but there is a good mix of AVCHD, R3D and various SD stuff, too). This one is full of about 95 percent.

  I also have a backup of RAID-0 WD 4TB drive which is a little over 50% full and keeps a backup complete of all the drives in my system, less the OS and programs. (FW800)

  Then I have a second drive 2 TB of single disc that I use to maintain an offsite backup of whatever I am working on projects, more important things like photos and graphics. This one is full of about 30%. (FW800)

  Then I have a third disk single disk of 1 TB, which is a general backup drive and usually remains in place and is about 80% full. (USB 2.0).

  OK, so it's where things are now. From what I read, I think I might be better off by doing the following:

  250GB for OS/programs

  500 GB for the previews/Scratch/pagefile

  3 x 1.0 to drives (non-RAID) for my projects/media OR 1.0 TB RAID3/5 for projects/media (but I'll have to find a way to archive a bunch of stuff... BluRay?)

  I've got room in my system of adding a player more and I can probably get the approval for the purchase of a disk more if I asked my boss - so if I got a 2 TB drive, I could do a 2.0 TB RAID by using two TB 1.0 discs for interlacing and the 2 TB for parity, leaving me with an extra 1.0 TB? Or should I get a disk 1 to and a 2.0 to Raid with two disks of intertwining and two for parity? I'm really not upward on things like RAID, despite reading your article on Wiki and he...

  Also, I could separate my current RAID-0 and not lose the data on it?

  Just FYI, I use RAID on Board (using the motherboard ASUS P6T6 Server) and the purchase of a RAID controller is out of the question right now...

  I edit mainly HDV/AVCHD, but I have a little RED 4 k, and I'm hoping to upgrade my HDV for the JVC GY-HM700 camera soon.

  Thanks for your advice and your expertise!

  David

  Thank you, David, which makes it much clearer. At least a lot more understandable for my mind tired now.

  Given your options (no controller raid separated, possibly one or even two additional discs), I would go for this configuration:

  C: 250 G OS & programs

  D: project photos/graphics/audio-only 500 G, using Audacity / other documents & Pagefile

  E: 1 TB projects and outputs & media Cache

  F: 3 x 1 TB Raid0 for media and previews

  The reasoning is that currently you run lack of space on your 2 drive raid0, when editing your access to current content on D will be rather small, so move your swap file can be attractive and by using the E drive for media cache, next to projects you split the load between E and F. Your drive F is growing in quality and will be faster and backups are supported with the 4 TB and off site of 2 TB drives.

• E HP6830 all-in-one: with disabilities... network configurations please help

  I'm having the same problem.  Just Bough this printer 2 weeks ago staples.  Everything I select, wifi, network, fax even scanning e-mail I receive a message indicating "built in the configuration of the network have been disable contact administrator or the person who created the printer.»

  Help, please.

  Hi @Babyd1967,

  Welcome to the Forums of HP Support! I understand that you can not access anything whether it's on the screen of the printer without administrator rights. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I can send you the reset of the printer in a private message. This should take care of this problem.
  In the forum next to your handle name simply click on the envelope to see.

  Please let me know the results and if there is anything else I can help you. Thank you.

• Configurations of operation and progress of the built-in firewall in Windows XP Professional SP3 for Power Users

  Y at - it this KB articles explaining how Firewall works and how to configure it to be robust? I mean, should I use security policies or change something in the Windows registry?

  Hmm... Looks like I found something:

  http://TechNet.Microsoft.com/pl-PL/network/bb545423.aspx

  But do someone have much more information to share with me?