My PC does not recognize a 16 GB SD card when it is plugged into the interbnal reader.

Similar Questions

• PC Windows XP does not detect my 1 GB SD card when I put it in the slot, but the light

  My PC is running Windows XP Service Pack 3.

  I have several slots for various types of cards and due to have been to a wedding, I need to get the pictures on my camera, I popped the SD card which is a 1 GB Sony Memory Stick PRO Duo in the slot for this card, the light and my mouse flashes everything but nothing happens.

  Can someone please? I can't find the USB cable for the camera

  Thank you very much

  Hello

  (1) have you made changes before the start of this issue?

  (2) using the card reader?

  Method 1: Why does my computer detect my new USB device when I am running Windows XP or Windows Server 2003?

  http://support.Microsoft.com/kb/314634

  Method 2: Windows XP does not recognize a secure digital card when you reinsert it after you remove it

  http://support.Microsoft.com/kb/812661

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows

  Method 3: Install the latest drivers from the manufacturer's Web site.

  Also occurs with any other SD card another it is recognized or detected or you can even check if the same SD card becomes recognized or detected on the other computer.

  See also: http://social.technet.microsoft.com/Forums/eu/itproxpsp/thread/103ce9a2-2b5c-4a04-9b9a-eef9ff78dbd3

  Let us know if t his help.

• Premiere Pro CC 2015 does not recognize my 4 AJA Kona card

  Hello world

  Premiere Pro CC 2015 does not recognize my 4 AJA Kona card.  Here are the specs:

  Computer:

  Mac Pro 2013 (trash)

  OS: 10.10.5

  Map:

  AJA Kona 3 G + 4 e/s

  Installed in mercure Helios via Thunderbolt

  I can capture in the AJA control room, the computer recognizes the card and my Mac Pro towers plays very well with the first CC 2015 + combo 4 Kona.

  What I did to solve problems:

  -Replace the mercure Helios with mercure Helios 2

  -Replace cable Thunderbolt

  -Ports exchanged

  -J' tried CC 2014

  -Restarted

  -Standing on one foot...

  Any help would be appreciated!

  Hi Vinay,

  What has ended up having to happen was 12.3 UN-installing, installation of 10.6.1, can upgrade to 12.3.  Just solved!  Thank you

  jZ

• My sansa e280 v2 does not recognize my 4 GB sdhc card

  My sansa e280 v2 does not recognize my card sdhc and i ' v ever read other posts, but it does not work. i ' v used in msc mode, but the music does not appear. It happens on the computer, but of course I need extra space.

  some posts say always use rockbox anyway, but I do not understand what to do.

  Help, please!

  RB firmware does not replace the, but rather sits next to him. You can start either at will. The Rocbox utility should install everything for you.

• iPnone 4 s recognized do not want dv7 - 7333cl rnning Windows 8 when it is plugged into usb port

  Laptop does not recognize the iPhone 4S when plugged into one of the 4 usb ports. All the usb drivers are up-to-date. All the udates win 8 and HP have been installed and are ongoing. Ports recognized so sticks of memory seem to work. Is there a special driver needed for iPhone?

  Hey texasbootz,

  I'll have you to answer a few questions to understand exactly what is happening:

  1. When the iPhone is connected to the laptop, there is no pay?
  2. When the iPhone is connected to the laptop, it appears in Device Manager?
  3. ITunes is installed?

  If she is not charged when it is connected, it is possible that the cable you are using is not working properly, and you may need a replacement. Alternatively, the iPhone itself is having a few problems.

  In any case, given that the other devices work in all of your USB ports, it is possible that its a software issue (with pilots from the iPhone) or a problem with the case of the iPhone. You will need to contact Apple for support on any of these questions. I suggest try to re-install / install iTunes, see if that fixes it, then contact Apple.

  I hope this helps!

• Windows does not load and displays a black screen when it is connected to the power supply

  Original title - Windows Vista running on my laptop Sony VAIO

  Trying to turn on my laptop using the built in battery nothing happens.  When the laptop is connected to the power supply and turned on Windows does not.  It shows something in the sense that it does not properly off.  It tries to load back to a system restore point before the last stop, but seems to fail again during this process.  All that is displayed is a black screen. Currently the power on light is on, the battery light is on, but the drive activity light is off.

  Yet once again, I switched on the laptop and finally the Startup Repair process is automatically called.  After the display of the bar to attempt repairs, the system has been repaired successfully.  As a result, the I ran my Norton anti-virus, followed by Windows Updatesoftware.

• WHY MY USB DOES NOT SHOW WHEN IT IS PLUGGED INTO THE USB PORT?

  I use my USB key, windows7 ultimate 32 bit is not show I have uninstall all and restarted my computer (laptop), but still does not work, I downloaded some readers but still does not he continues to show me this in Device Manager, I have used several USB but it still doesn't work do not? I'm going to enjoy anyone who helps a lot thanks

  

  Hi Ali,

  Thank you for the update.

  I suggest you to run the next Fixit and check the status.

  Automatically diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  What it fixes:

  • When you install a hardware device, it is not detected
  • Determine if your audio device is plugged
  • The driver updates are not installed automatically by Windows Update
  • You receive one of the following errors:

  Click on run Fixit.

  Please let us know the State.

• My computer does not recognize my camera or media card more? __

  I use a Canon DSLR and can not get the computer to recognize the card media. It also won't recognize the camera directly? Any suggestions?

  Hello

  ·         The computer is able to recognize the device or media card earlier?

  ·         Was there any recent changes to the computer?

  ·         What happens when you connect the device to the computer (done the camera upward show in Windows Explorer)?

  Try connecting to a different computer and check if that is recognized.

  Check if there is information in Event Viewer which may help us to solve the problem:

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Also run the fix in the given article below.

  http://support.Microsoft.com/mats/hardware_device_problems/

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• my computer does not recognize my mp3 or my USB when I plug them in

  memory card Manager message says failure to identify the types of supported files

  Markal salvation,

  1. you receive messages or error codes?

  2. were you able to use these devices before with no problems?

  3. did you of recent changes on the system?

  Method 1:

  You can try to start the hardware Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows

  Method 2:

  You can also read the following article and check if it helps.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

• Windows 7 does not recognize my Canon EOS 10 d when I plug it via USB - can not find the driver.

  When I plug in my camera the computer emits a sound that acknowledged the event, but can not find the driver for my Canon EOS 10 d digital camera.

  Canon has a compatible driver Windows 7 for your EOS 10 d...

  http://software.Canon-Europe.com/ Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• My Lr5.7.1 does not recognize my printer Epson XP-760 and after customize printing in the print Module, printing options (lower right AND Main Menu > Archive > print) are disabled

  I am running Lr5.7.1 on an iMac, retina 5K (OS X Yosemite 10.10.1).) My printer (Epson XP-760) works fine with all other applications, but not with Lr! After choosing my printing preferences in the print Module, it works if I select print file and save it to the desktop and then return to preview and print from there. This is not what I want. I expect that the print button (bottom-right) should be disabled and not disabled and send to the printer directly from in the Lr print Module. It doesn't matter if the printer is turned on Wi - Fi or USB (or even both).

  What is the problem? What else can you or should I do to make it work as I hope?

  Gunnar

  My Swedish is not good, but I think that you print on file. Did you try chaning where it says JPEG it changed printer?

  You might also on 5.7. On Lr if you go to the Help\System of information, what is the version number? If she is 5.7, you're not on 5.7.1. Yo can still update manually, go to Adobe - Lightroom: for Macintosh: Adobe Photoshop Lightroom 5.7.1, download the dmg and install.

• Windows 7 does not recognize Tablet 64 GB sd card

  I have a Nextbook7P12 and have been mounted a 64 GB micro-SD card and my laptop Windows 7 application always format the card. The only option I get is 32 GB.

  I can format the micro SD 64 GB card in the laptop using the converter to SD card, no problem.

  The Tablet confirms that this is a card 64 GB, but as soon as I connect the cable between the laptop and the Tablet, then I get the message 'format the memory card.

  Hello

  Thank you for your response.

  For that matter its best contact SD manufactures, so that they can help you better.

  Please let us know if you need help on Windows. We will be happy to help.

• My truncation tool does not work on CS4 and CS5. When I crop, he trims the image in a tiny dot. Help!

  Does anyone have advice on the setting of the truncation tool so that it works correctly? I'm on deadline and I'm panicking.

  Since you are eager to get out immediately this jam, use this alternative method:

  Use the rectangular selection tool to establish the size of the harvest and the position. Then go to Image > Crop. This should solve the problem.

• Apple tv says mode not supported when it is plugged into the tv

  My tv apple 4th generation is working perfectly, and then all of a sudden it says not supported mode on my insignia tv. the main screen of the apple TV will go up for a second then it will say not supported mode. I tried to use another HDMI cable and also tried to lower the resolution on the apple tv, because it will work on my other tv, and nothing works. any help is appreciated. Thank you

  If it works on another TV, then the problem lies in the badge

• Why my computer will not collect my memory card when it is inserted into the slot

  I recently got a new memory card.  I wanted to put pictures on my computer but it will not pick up what I've inserted.  There is a green light, but nothing happens.  I have windows vista.  The last time that I did that it worked very well.  Can someone help me?

  The memory card is a "pro Duo' memory stick.  It's a 8GB.

  Then it is SDHC, and I guessed it was the problem almost certainly is. Card reader isn't most likely plain SD, SDHC, and he can't read the card.