Apple tv says mode not supported when it is plugged into the tv

Similar Questions

• WHY MY USB DOES NOT SHOW WHEN IT IS PLUGGED INTO THE USB PORT?

  I use my USB key, windows7 ultimate 32 bit is not show I have uninstall all and restarted my computer (laptop), but still does not work, I downloaded some readers but still does not he continues to show me this in Device Manager, I have used several USB but it still doesn't work do not? I'm going to enjoy anyone who helps a lot thanks

  

  Hi Ali,

  Thank you for the update.

  I suggest you to run the next Fixit and check the status.

  Automatically diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  What it fixes:

  • When you install a hardware device, it is not detected
  • Determine if your audio device is plugged
  • The driver updates are not installed automatically by Windows Update
  • You receive one of the following errors:

  Click on run Fixit.

  Please let us know the State.

• Why video AVCHD still presents itself as "File of Format not supported" when they are imported into CS5?

  I've been editing AVCHD with CS5 for several months, but every time I import video AVCHD first always displays a message box titled "File import Failure", all lists of imported files, and then at the bottom of the window, it says ' Error Message: file format not supported ".  You click on the 'OK' button and change with the film without problem.

  I was wondering why this message still comes up if the film is supported in CS5.

  Just MTS files are probably very well; First is quite smart to seize what he needs in the other files, as long as the file structure is intact. An even easier way would be to use the media browser; Navigate to the folder containing the AVCHD folder structure, and the MB will flip mode display of AVCHD. It will give you a list of all the files contained in the folder of DATA flow, without having to actually dive into the file STREAM. Select some or all of the files and import them into your project.

  The message "File Format not supported" is due to all of the files you listed; some of them are used by first behind the scenes, but they are not the media themselves, so that they can not and do not need to import.

• Acer Aspire V5 552 slow game performance low when it is plugged into the charger (HELP!)

  So, I recently noticed that my Acer laptop has a problem when it comes to games. The speed of the CPU is really low when you start a game, I did not notice this until a few hours before... I was playing Borderlands 2 and I am disconnected from my laptop to move it to my office and I noticed that my FPS has increased almost double what they were before, I plugged my laptop for the charger and I started to look at the the CPU cores, each carrot got preatty fluctuating between speed and low speed. I've tested this with all my games and all had the same results, for example a Borderlands 2 area when it is plugged in the exercise was about 18-22 FPS, but when disconnected from the charger the FPS increased from 34-48 or more. I tried to read a lot of things on the web and can not find a solution to this...

  Another test I did was with Dolphin Gamecube emulator, the FPS when playing the legend of Zelda The Wind Waker varies between 22-26 or lower on the places of strong thickness, when unplugging my laptop charger I have 30 fps constant in these heavy areas.

  Also with Counter Strike Global Offensive, the game normally ran about 50-60 FPS in all the cards and then tested without the charger plugged in and got 70-120 FPS on all cards

  https://www.YouTube.com/watch?v=xc6Hwgedqmo

  This video shows exactly what happens for me, unless I have an AMD GPU and CPU.

  My Acer Aspire V5 552 Specs are.
  Windows 7 X 64
  8 GB RAM
  AMD A8 - 5557M @2. 1 GHz to 2.8 GHz Turbo
  AMD 8550G GPU
  I have all the latest drivers and updates installed.

  The charger is not damaged, it is original one supplied with the notebook.

  Got a nice deal on a MSI gaming laptop. At first I thought that the Aspire V5 has been an excellent laptop for budget games, but then turned that has a performance problem that ruined the processors to give power maxi while only plugged in, but when unplugged the other way around. Still a nice cell phone with potential wasted with this particular problem.

  No solution to this problem, tecs don't even bother looking at BIOS like other manufacturers of laptop to solve this same problem.

• Got a new computer last wk with 10 reinstalled windows first Pro... when trying to import DVDs it says format not supported when well even I tried I've already imported before on the old computer to the dvd

  How can I fix it

  You try to import VOB files, or anything else?

• My PC does not recognize a 16 GB SD card when it is plugged into the interbnal reader.

  I have a Dell Dimension 9200 PC... It reads 1 GB and 2 GB SD cards fine... However when I plug my new 16 GB formatted card it does not detect it.

  Your 16 GB SD card is really a SDHC card.  Even if the card is the same size as the old SD cards, the internal structure is completely different.  To read an SDHC card, the drive must be SDHC compatible.  The reader needs internal 'material' to read SDHC cards.  Therefore, as you said you can read 1 to 2 GB cards, you have a single SD reader.  You will need to purchase a SDHC reader.

• Garmin Forerunner 210 maintains the connect/disconnect when it is plugged into the HP Pavilion dv6-3040sd

  I have a problem connecting my Garmin Forerunner 210 (GF210) of my HP Pavilion dv6-3040sd. I know that the problem is with the laptop, because I have tried several other laptops and it works well. When I connect the device, windows installs the drivers. So far so good. When the drivers are installed, the laptop recognizes the GF210 and it connects. A window opens to let me choose what I want to do, but before I can decide the device is disconnected and reconnected. He goes on and how.

  On computers laptops onther the GF210 appears in the 'Computer' section as an external hard drive.

  My laptop is running on Windows 7 64 bit and all windows updates are installed.

  Does anyone know an answer to this problem?

  Hi HarmR,

  In fact I have some stuff in my bag!

  Because your system is unable to recognize the Garmin unit long enough to change the drive letter, I have recommended to perform a backup and restore of your operating system. This can be done by following this document on the backup of files (Windows 7), and more to perform a recovery of the system HP (Windows 7). This should restore your system to the factory settings.

  If the problem persists, please call our technical support at the 1-800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl
  
  I hope this helps!

  Have a great rest of your Thursday

• The battery charge falls even when it is plugged into the satellite series

  I have a laptop satellite and although it recognizes the power adapter when it is connected and that the icon in the taskbar shows "load", the percentage of the battery charge seems down.

  It is only while the laptop is turned on, because it does not charge the battery when it is turned off.
  I didn't know that he used the power of the battery so that hip, so I'm puzzled by this not only why the battery doesn't seem to be in charge, but also why the battery seems to fall once the laptop doesn't have to use it anyway.

  Any help is appreciated!

  Hello

  I saw this problem on my own laptop in the past. even if the laptop is charging, the battery seems to fall in charge.

  This indicates that the battery life is coming to an end, there are a limited number of cycles of load for a battery before it dies.
  Also when you have the computer is off fresh is always lost at a considerable pace, because the battery is good, "die."

  You can't do anything on this issue except to buy a new replacement battery for your laptop computer to a repair center authorized Toshiba. This should answer your question.

• power light is solid then blinks when it is plugged into the xbox 360

  power light flashes

  Hello

  You will need to contact XBox support for this issue.

  Directory of Xbox Forums - Xbox.com: http://www.xbox.com/en-US/forums

  Contact us - Xbox.com: http://support.xbox.com/en-US/contact-us?xr=footnav

  Xbox.com: Solve common problems: http://support.xbox.com/en-US/xbox-360/browse?xr=shellnav

  Concerning

• When I start my pc the monitor reads "mode not supported".

  unplugged my pc & MONITOR. When I plugged it back in & has tried to start it, it keeps reading 'mode not supported '.

  Hello!

  The pc is probably set to a resolution that does not support the monitor. Start in safe mode and set the resolution to the native wreck of monitors.

  To start in safe mode, you will need to press F8 at the moment of startup and select Safe mode.

  Let me know if that is not the case.

  Kind regards

  Joel

• Tecra M5 Management Console download says device not supported

  Version 3.5 of the management console says device not supported when I try to install? Yet, it was on the computer in the folder of the Toshiba driver and is even available on download for my Tecra M5 PTM50E model.

  Help please?

  Hello

  As suggested in your other discussions on the update of the BIOS, you must install common in order to install the other tools Toshiba and utility Modules.
  The common Modules is an essential component of Windows systems and it is necessary to other original programs for TOSHIBA to work properly.

  Welcome them

• iPad does not load when it is plugged.

  My iPad and iPhone don't charge at all or very slowly when it is plugged into the outlet House or in the car while they are on. They must be turned off in order to load. The battery icon shows that they are in charge. I use a couple of different USB cords. My main USB cords are cords original Apple. Would the battery icon show that happens when there is no change in the percentage of charge?

  Should I have all the applications closed during charging? Are my old just get or carry out USB connections?

  Thanks for any advice.

  Hello

  Buy a new apple charger also try another point of power.

  See you soon

  Brian

• Tecra R850 - internal MIC does not work when earphones are plugged

  I factory reset my laptop yesterday and all since the internal mic only works when nothing is plugged into the Jack, including the headphones without a microphone and speakers. This was never a problem before resetting factory and I was able to plug in headphones to hear from people and can use the microphone to talk... now I can only talk to people when nothing is plugged in the sense that I have not heard from people on the speakers of the laptop...

  Any ideas guys? I don't want to have to buy new headphones :/

  See you soon

  It's really crazy. With the factory settings, everything should be OK.
  Theoretically, internal microphone can be blocked if you connect headphones into the microphone port.
  If please check al and don't forget your helmet is connected on the right audio output port.

• How can I change the video display Mode when the monitor mode not supported?

  While creating my new monitor, I changed the computer video display mode at 120 Hz by accident.  Now I see something on the monitor other than the words not taken in CHARGE the MODE.

  My system is a new HP Pavilion p7-1423W running Windows 8.1 with Intel i5-2320 3 ghz

  I tried the start mode by pressing ESC on power but do not help the startup options.  And the just F11 menu option makes the startup screen disapear and puts the monitor mode not supported.  Tapping F8 doen't work and tapping F12 just puts me in the bios menus that do not help.

  How can I upgrade the video card integrated with a video mode that is supported when I can't see the screen?

  I answer my own question because I found my solution, thanks to my grandson (freshman to Renselear Politech).

  I shoot to buy a monitor that displays a refresh rate of 120, so I could put my rear view.

  Here is the solution.

  My computer double exit DVI.  My grandson told me to connect my new monitor to the other output because the output does not get touched when I changed the original mode of production.  He has worked and is automatically selects the default monitors mode.  Then I've reconfigured the original output using the integrated display software. Solved!

• How to go from su mode not supported on Powerconnect 2848?

  Hello

  I need swicth managed mode to unmanaged mode on Powerconnect 2848. I pressed the mode button and rebooted but still solid green light it which indicates that swicth still in managed mode.

  How can I do this swicth not managed again?

  Thank you

  Change the mode switch to the 'managed' to 'mode not supported' clears the configuration of the switch. Change mode "managed" "managed" mode enables graphic management interface and sets the system to the factory settings. There is no way to back up the configuration of the switch.

  Always a good idea to be in the current version of the firmware.

  www.dell.com/.../DriverFileFormats

  To restore the default switch, press the button Mode for two or three seconds and then release. It should then restart on its own, do not manually power cycle it.

  Web Interface method

  Open a Web browser and connect to the IP address of the switch management.

  Type the appropriate user name and password, and then click OK.

  In the left navigation, click the plus sign to expand the system, file management, and then restore the default settings.

  Click OK in the confirmation dialog box.

  In the left navigation, click on the plus sign to expand the system, general, and then click Reset.

  Click Reset, and then click OK in the confirmation dialog box.

  Reset to factory CLI

  Reboot the switch, the switch is reset, look for the line to appear that says Autoboot in 2 seconds - press RETURN or Esc to abort and enter prom. and when that happens, press or or to access the start menu.

  In the start menu, choose [2] file Flash Erase by pressing on <2>and then confirm by pressing

  Hope this helps,

  Thank you.