My photographs show the wrong place

Similar Questions

• Dependencies in vi.lib and loading of the wrong place user.lib

  Hello

  I'm having a weird problem trying to load a LabVIEW project in 2013. Whenever I open the project folder, it keeps looking for files in vi.lib and user.lib in the wrong place. Instead of search in files (x 86) C:\Project \National Instruments\LabVIEW 2013\vi.lib, he look in C:\Program Files (x 86) \National Instruments\Targets\vi.lib

  

  I have manually browse for each file in the directories vi.lib and user.lib and point each a return to real folders. But in the project folder itself, all the files I have loaded just said that it is still in conflict. When I try to resolve conflicts of files, they disappear for a second then come back.

  I can't make LabVIEW for functions in the directories user.lib and vi.lib normal, it keeps adding targets in the destination.

  I tried to do a recompilation of mass, and which does not at all help.

  When I load the project, select a few dozen files vi.lib and user.lib, do a save all, close the project, and then re - open, I need to reconnect every file again.  It still seems for all... \Targets\vi.lib instead of just \vi.lib.

  This isn't the case for all projects, just this one it seems.

  The files are in the right place based on the path under "loading". If she says it's in : \Waveform\WDTOps.llb\WDT number of waveform samples DBL.vi, it really is. The path on the top is right, I don't know why LabVIEW is not find anything.

  Any idea how I can get this project to stop looking for vi.lib in the folder target?

  ng1902 wrote:

  I managed to get the errors to stop copying vi.lib and user.lib files in the subfolder of targets.

  This could be dangerous and cause problems.  If it's possible after your project.

  When I saw this sort of thing in the past, it was usually because of a broken dependency I got didn't really need.  I would say through your dependencies (in project) and search for the odd elements glyphs showing errors.  Try to find out why those are dependencies and remove unused code, or links to the missing code.  Resolve all conflicts and then make a backup of all.

  In the past, it happened when I tried to copy a project as a new project, and then changes the code snatch which was unnecessary, but there was always a code in a disabled structure that could not be loaded causing a kind of problem of linkage project.

• Verification request uses the wrong place

  I can't connect my mac to iCloud after changing my password.  Request for verification on the phone uses the wrong place.  It is safe to accept access?

  What do you mean by 'place' in 'request for verification on the phone uses the wrong place?

  You use two factor authorization?

• Why my iPhone showing the wrong time zone?

  Why my iPhone showing the wrong time zone when it is set to automatic? When I put it manually, it is fine. Is this a bug in the iOS 9?

  Try to activate your iPhone location service before

• take the cos(pi/2) shows the wrong result in swift

  take the cos(pi/2) shows the wrong result in swift but when I take the sin(pi/2) it shows the correct result.

  I'm messing around with math to swift before that I use it in my application but I'm having a problem to calculate the correct results with cos at 90 degrees, pi/2 radians and 270 degrees, 3Pi/2 radians.

  the results I get for cos(pi/2) are 6.123233995736766e - 17 when I know that it must be equal to zero...

  the same thing happens as well with the seizure of the sin (pi), sin (0), the sin (2 pi) and so on.

  6th-17 is zero! After all, you didn't feed it pi, but an approximation.

  Welcome to floating point!

  "The floating-point operations is like moving a lot of sand. "Whenever you move one you lose a bit of sand and pick up a little dirt".

  Kernigham and Plauger

• HP Officejet 4630e all in one: the time on my printer display shows the wrong time

  The clock on the display shows the wrong time.  Does anyone know how to rectify this please.

  Hello

  The date and time settings would cause problems of synchronization with Eprint if incorrect. The date and time should be accessible from the Preferences menu.

  Try this

  Power reset

  1. Without putting off the product, disconnect the power cord from the back of the product.
  2. Wait 30 seconds and then plug the power cord into the back of the product.
  3. If the product is not already on, press the power button to turn it on.

  Now, try to change the date and time and check.

  Where this fails, try this

  Setup > tools > restore defaults

  Try to set the date and time of return

  NOTE: This will remove network also settings so you need to redo the configuration of the network

  Measures to restore the network configuration

  http://support.HP.com/us-en/document/c03834108

  Although I am an employee of HP, I speak for myself and not for HP.

  Click on the thumb BRAVO upwards on the left to say 'thank you '.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

• FreeCell game moves the columns to the wrong place

  I checked the related topics were displayed with no luck.

  My problem is a column had moved and was in the wrong place.  Column 7 of 8 has been moved down beyond the end of column 8 and is now fully functional, to the right of the screen.  Now the right column 7 appears empty and is not recognized as a plus column.

  I tried to post on the other posts instead of starting a new post, but none of the experts seem to be looking back.

  I tried all the suggestions. Restore privious point, uninstall/reinstall, sfc/scannow, several resets etc. No luck.

  Other solutions?

  It is absolutely amazing. Than to repair a 800ko program/game it will take hours of effort to go through a reinstallation. Backig to the top of my data, reinstall my programs, desktop, shortcuts, passwords etc.

  The option 'fix' using the disc is not available for me because I have a Dell laptop which has the hidden partition "system restore." I don't think that the option is available. I'll check.

  It seems that where ever FreeCell 'will' and 'comes' of when you use the "Turn Windows Freatures power' is corrupted.

  Just an aside, is that the problem has added a "degree of difficulty" to play FreeCell, that I adapted for. I think that at this time I'll just live with it and add another element to the list of what's wrong with MicroSoft Vista.

• When you type on the keyboard, the characters on the screen are not what I typed. "These characters are in the wrong places (~ @ #" | "), how can I solve this problem?".

  The characters are in the wrong places (~ @ "|") (# and the Sterling character is missing), I tried troubleshooting and this message comes on my screen.

  ID of device PNP ACPI\PNP0303\4 & 31AD995D & 0
  Error code this device is not present, does not work or does not have all its drivers installed.
  One of you smart people have a solution I can try.
  Thank you very much
  otev

  The characters are in the wrong places (~ @ "|") (# and the Sterling character is missing), I tried troubleshooting and this message comes on my screen.

  ID of device PNP ACPI\PNP0303\4 & 31AD995D & 0

  Error code this device is not present, does not work or does not have all its drivers installed.

  One of you smart people have a solution I can try.

  Thank you very much

  otev

  You use the wrong keyboard layout. Apparently, you have a UK keyboard, if you want that the UK keyboard layout. You are probably using the American provision.

  To change it, go to control panel | Region and language and click the keyboard and languages tab. Then click on change keyboards... and choose the one that suits you.

• on the backup, I saved D recovery and it stopped due to 'not enough space. / have I saved in the wrong place?

  I backed up my computer and it went to recovery D but it has stopped backup because of the "not enough space" How can I handle this?  I'm new on this.

  I backed up my computer and it went to recovery D but it has stopped backup because of the "not enough space" How can I handle this?  I'm new on this.

  dodieZONAKIS DDS,

  Your question [on backup, I saved the D collection and he stopped due to 'not enough space.] [/ have I saved in the wrong place?] (<-- that="" is="" a="" link="" you="" may="" click="" on="" to="" get="" back="" to="" your="" original="" question)="" has="" been="" marked="" as="" answered,="" only="" you="" did="" not="" mark="" it="" as="" such="">Rob.C a.]

  I feel compelled to ask whether and how you solved your problem?

  The marked answer * not * have one you used and for the benefit of those who might ask the same question in the future it is better the original poster mark their own answers, in my opinion.

  If you feel that your issue has been marked as answered by mistake (the answer does not match your need or your fix) then please, deselect as soon as POSSIBLE. I am including instructions on how:

  You can go to the answer and click on the following to stand out as a response.

  

  If you are able, please go back to your original question and that everyone knows how you solved your problem, if you have and mark the answers correctly. This initiative will help to close the question properly or help us to help you if you still need help.

  Thank you!

• I formatted my PC with windows vista and reinstalled but now it shows the wrong key. I use my purchased copy of the software in 2009

  original title: ACTIVATION of VISTA
  I formatted my PC with windows vista and reinstalled but now it shows the wrong key. I use my purchased copy of the software in 2009.

  You simply have to use telephone Activation...

  activation by telephone (call of the operator)
  Click the Start button
  in the search box, type
  SLUI 4
  and press the Enter key
  Follow the instructions - but when asked which service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

• Installed Windows 7 in the wrong place

  I just installed Windows 7 on my laptop, but in the wrong place.  It's on my Recovery (C): and I have more disk space (D): available in my computer folder.   File recovery is now complete as a result.  Initially, I tried to repair an old version and must have wantonly selected file recovery as the location to install when I decided to reinstall.  Now, I have no space or disk space.  How can I remedy this?

  Boot from the installation disk and try to install the new, but make sure you only choose the right partition this time.

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Drop-down menus appear in the wrong place

  Some of my menus appear in the wrong place. Seems to be limited to those in the Panel on the right... Also, it seems to be related to windows 10's high resolution display scaling, because it solves the problem to initialize it to 100% (but causes many others...) I also tried to go to lightroom.exe properties to disable the high DPI scaling, but it makes no difference... Is this a bug, or is there something else I can do to fix this?
  

  Hi AASOS,.

  This issue has been traced.

  Refer to this link: 2015.6 Lightroom: list dropdown question menu position with screen high resolution | Community customer Photoshop family

  Concerning

  Claes

• In Lightroom 5, choose "Merge to Panorama in Photoshop" open PS in the wrong place

  Hello, I use Lightroom version 5.7.1 on an iMac with OS X (version 10.10 [5]) and, until recently, if I chose the Photo - Edit open inside my request of Photoshop on my boot drive.  Now, although it uses by default trying to open the backup copy of Photoshop on my external backup drive, which is a clone of the hard drive of my iMac, and if I choose "merge to Panorama in Photoshop" (which I need to do often enough) it freezes and gives the following error:

  

  I can see that it tries to open the cloned version of Photoshop (on iMac Anna/backup/Applications/Adobe Photoshop CS6) but I can't find any way to change this so that it can reuse the version on my boot drive.  I'm sure there must be a file somewhere that staged Lightroom to try to open Photoshop on the external hard drive, but I don't know where it could be.

  If I have already opened the version of Photoshop on my startup disk before trying to merge with Panorama, it will use that one.  If I remove the external hard drive containing the cloned version of Photoshop, I just get an error that says that the files could not be changed because Photoshop CS6 could not be launched.

  I tried to delete the file [file username]/Library/Preferences/com.adobe.Photoshop.plist, then by restarting Lightroom, but it did not help.]  I also tried to change the external editor in Lightroom preferences - preferences: I can create an additional external editor and have pointing to Photoshop on my boot drive, but this has no effect when you try to merge with Panorama and I see no way to change the settings to 'Edit in Adobe Photoshop CS6' at the top of the box as shown below :

  

  If anyone has a solution to this, I would be really grateful.  Thanks in advance.

  Anna

  Post edited by: Anna walls

  After posting this question I've been tracking the answer me - it seems that there is a bug in Lightroom that Adobe know since at least January 2015.  As far as I know, it has not been resolved in the latest version of Lightroom, but they wrote a plugin that works around the problem.  I have downloaded and run and it works, so I thought I would like to include the link to the page in case someone else has the same problem:

  Lightroom: "Edit in PS 2014" opens PS 2014 in the wrong place. Community customer Photoshop family

  Ignore the first suggestion about uninstalling Lightroom and Photoshop and scroll down the page until you find the official response from Jeffrey Tranberry - there is a link to download a plugin it and once you installed you will be able to specify the location of Photoshop.   With a bit of luck will be solved properly in a future version of Lightroom.

  Best wishes

  Walls of Anna

• Why the work is sticking to the wrong place?

  This is something that has happened on a few months, but I was reluctant to send a page because most of what I work on is confidential. The work that I am writing here is also confidential, but I'm sure that imagery is not clear enough to copy.

  In any case, the problem is this: whenever I have copy of a work HAVE file to another (sometimes it's an AI-editable PDF), some stick to the wrong place.

  A couple of things to note:

  1. it generally only affects the lines with arrow heads.

  2. a lot of original vector files have been created in a different program (AutoCAD, I think) from our Chinese factories.

  3. the files used in the example attached have been widely edited/saved in Illustrator CC (2015) by me before opening, then copy and paste.

  4. this happens only in the last two or three months of the CC to Illustrator using up-to-date releases.

  

  As you can see on the screenshot, when I type cmd + v, the arrows that were originally next text on the right and bottom work highlighted stuck high above the planned location. Does anyone have an idea why this is happening?

  Mike,

  The issue should be resolved with the new patch/update, 19.1, that should solve known issues unresolved with 19.0.1.

  If she does not appear, disconnect and then reconnect the creative cloud application. After that, the 19.1 update must be visible in the creative application of Cloud.

  Default you can move or adapt the work affected (a little), then press Ctrl / Cmd + Z to undo, to get it in place.

  This is a roundabout way to use until the issue is resolved.

  Or you can turn paste remembers layers in the layers panel, if you can live with the side effects.

  Returning to the CC 2014 will be also get rid of him.

• Stroke in the wrong place after copy/paste in Illustrator CC

  Since the passage of the CS6 at CC, I have a problem of copy/paste, work of one Illustrator document to another.

  Sometimes features are in the wrong place as you can see in the screenshot below. On the left side I just copied a picture from another file I and lines appear at the bottom right where they should be (in this case it is not possible to select the lines "out of place". Moving all about what I selected moves around the misplaced lines, but they keep the same distance. The way I found for this problem is either doing "Contour lines" or to make the illustration more bigger or smaller. Which will appear automatically the features in place. If I can undo these changes traits remain in the right place.

  This seems to happen with illustrations that have been made to the CS6, but save the original file does not help CC; the problem is occurring. It also seems to occur to the traits that have a variable width profile. Features with a uniform profile remain in place. I had this problem in Illustrator CC on Windows and Mac, with various files that I created initially in CS6. It is quite annoying because I copy and paste a large number of these illustrations, so I find myself constantly having to do "Contour lines" and then "Cancel" to remedy. What can I do to prevent this?

  

  Please apply the latest patch 19.1 this should solve your problem.

  -Ashutosh