My photosmart 7400 series sends a blank page between each printed page.

My photosmart 7400 series sends a blank page between each printed page.  The driver that came on the CD with the printer is not compatible with Windows 7.  It worked fine, but the driver supplied with Windows 7 is the problem.

The solution worked.  Thank you very much.

Tags: HP Printers

Similar Questions

  • Printer runs a blank page between each printed page.

    I have a HP Photosmart C7280 All in One Printer.  I use Windows 8, whenever I have to print anything, she travels around blank pages before each printed page.  If I print 5 pages, there are 5 white pages also, one between each printed page.  Can you help me?

    Baumer1960
    Thus, Baumer, all other pages is a clean sheet when you print, and it comes from any program you use. Is this fair?
  • OfficeJet Pro 8500 Wireless: Hard reset after automatically adjustments between each printed page?

    I have a HP Officejet Pro 8500 Wireless, mainly connected with WiFi for PC Win7.

    The problem is that the printer automatically adjusts between each printed page! How can I fix it? Is this possible with a hard reset?

    Thank you for your answer!

    I think that the cable of the red ink has been blocked, but it's fixed now.

  • Printer feeds a blank sheet with each printed page only with HP Envy and Windows 8

    My HP ENVY Phoenix h9 - 1440t PC running Win 8 causes my HP Photosmart C7280 AIO feed a blank sheet before printing each page.  The printer is connected wireless to the router and works normally when printing to my HP dv9000 equipped of VISTA.  Is this a problem of victory 8?  How should I do?

    Hi Gnerd5

    I understand that the computer with win8 feeds a blank page before printing the Photosmart c7280.

    You go to the website www.hp.com and download drivers for win8?

    The software may not be installed correctly.

    I would recommend that you download the drivers from the url I've provided, simply select the appropriate operating system and if it is 32 bit or 64 bit and select the driver-product installation software.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3204785&LC=en&cc=us&DLC=en&lang=en&cc=us

    or you can run the installation of printer HP Assistant for windows from the link below.

    http://support.HP.com/us-en/document/c02691615

    To determine if this is 32-bit or 64-bit click on the url.

    http://support.HP.com/us-en/document/c00757948

    If you need more simply make assistance let me know.

  • HP deskjet 3510 sending 2 blank pages before printing a page

    Whenever I send a print message to my deskjet 3510 my MacBook, it place to white pages and then prints.  This does not happen when I scan and print.  I tried the icon, the Word printing file and control p.. all produce the same results.  Would appreciate help.  Have had printer exactly 1 year just started 3 months ago.

    Hi mvmagee,

    Thanks for letting me know. That's great.

    Please consider this message Message 2 of 3 marking as "Accept as Solution" so that someone else in the community of HP who can meet the same or similar problem will know what to do.

    Thank you.

  • Blank page between pages printed on Photosmart C7820

    I have a printer photosmart c7820 who keeps giving me a blank page between each printed page.  I use Windows XP/64.  I tried to delete the printer driver and went to HP to reinstall several times.  I also tried several approaches to online sources.  Still no luck.  At the same time, he did not do so, but my computer crashed and I had to repair it by the Geek Squad.  It seems that since then, I get the blank page.  Any help?  Thank you, Tom

    The folder should be there after you run the downloaded installation of the web. Try this:

    1. download the software and drivers from following link:
    http://goo.GL/25oiG
    2. once it's done downloaded, launch the installation.
    3. a box containing the word extraction should appear and go from 1% to 100%.
    4. once it get to 100%, it should open a window with a few options. Simply choose Exit.
    5. try the instructions in my previous post and let me know what happens (or if something has not happened as it should).

  • Printer HP Color LJ5225dn sends a blank sheet

    HP color laserjet cp5225 prints a blank page before each print job.  The printer is set to the correct paper size.

    I updated the firmware of the printer and it did not fix it.  Looking at the printer settings and preferences, I noticed that the Eco settings were not on.  I changed print to EcoSMART settings shortcuts and he ceased to send a blank page before each print job.  Properties of the printer, general, preferences, shortcuts printing, settings EcoSMART.

  • series of hp photosmart d110 prints blank pages

    Hello... I have a HP Photosmart all-in-one D110 series. When I try to print, all I get is a blank page. I've tried everything! Cleaned printhead, alignment (prints the blank), feeding on and outside... Everything! It will print very well.

    Help me, please!

    Thank you

    janetk1

    Hello janetk1,

    Did you check the ink levels?

    If any color is< 25="" %="" i="" guess="" you="" should="" try="" replacing="" that="" color="">

    If the problem persists, then call HP Tech Support for assistance.

    If you are in the United States, the toll free # is 1-800-474-6836.

    If you're not in the United States, and then connect to www.hp.com , bottom left it is an icon of the world map, click it and then select the region that you belong to, which would then provide the support options for you for this region.

    Kind regards
    Jabzi

    Help the community by marking this post.
    Your question has been answered? Mark it as an acceptable Solution.
    See a great post? Give a Kudos!
    I work for HP

  • HP photosmart Plus B210 series - prints blank pages

    Hello, I got the printer above for about 4 years with no problems. He suddenly started printing blank pages. I went through all the cleaning cycles, alignment etc., but without success. I bought a new genuine HP print head and installed new cartridges and still once, it prints blank pages. The message I get is that alignment process has failed. Does this mean the printer is down and I'll have to buy a new one, or can you suggest a solution? I went through all the steps suggested for this type of printer on your forum, but I still get blank pages. It is a disaster for me and my wife whose work depends on the network printer. Any suggestion would be appreciated. Thank you.

    Hi @drbince,

    Given you have changed the print head and the problem persists, according to me, maybe it's time to consider a replacement printer.

    Alignment is a failure because the printer does not black. If you have followed all the steps in the following document, it might be time to give us a call to weigh your replacement options: HP Photosmart Plus B210 printer - color or black ink not print.

    If the problem persists, what you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on options contact HP - click Get phone number

    File number and phone number are displayed.

    If it meets your needs, please consider tagging this post as solved by clicking accepted as Solution below and others can find the answer more effectively.

  • Pavilion a6312p: Photosmart 7510 prints blank page

    I have a HP Photosmart 7510, who served me well for over a year until what I tried to use it today.  I tried to print a letter in Microsoft Word 2010, and the printer produces a blank page.  The ink levels are good, in fact, I have a brand new black and photo black installed this week.  I tried to print a test page and nothing printed except the logo of Microsoft of color and words, printer Windows-Page of Test, the text is so light that I could barely read.  I have cleaned the printheads twice, and represented the test page with the same result.  I don't know what else to do.  The HP Scan and print doctor said all control very well.

    I used the printer every day since the installation of the new black cartridges and it was working fine until today, so I know this isn't the issue.  I hope there, can someone give me an overview of this issue.

    Hi bankercop,

    I see that you have a hard time getting black ink for printing with the Photosmart 7510, I would like to offer a suggestion. Have you tried cleaning the print head manually?

    Accumulation of ink can lead to this problem and the own automatic does not built / dried ink in the head.

    Although this guide: 'Is missing or does not have the print head' or "Print head is not detected, missing or not installed correctly" appears for HP Photosmart e-all-in-one 7510 Printer series, addresses, a print head missing, the cleaning steps are the same.

    I hope this helps you. See you soon!

  • Photosmart 6525: Blank Pages when printing is complete

    After a print job is completed, the PhotoSmart 6525 continues to feed the sheet after sheet of blank paper until one of the following conditions occurs:

    1. The printer is out of paper
    2. I managed to successfully cancel the job (what happens usually after that at least 10 blank pages have been through, the printer jams unless)
    3. The paper jams (usually after 5 or 6 white pages). This is what happens to 90% of the time.

    Troubleshooting steps I have already taken:

    1. Hard reset of the printer (three times)
    2. Clean all rollers (at least twice)
    3. Reset the print Mac (twice) subsystem
    4. Reinstall the latest version of the printer software (also at least twice).

    Nothing did. Any other suggestions? Otherwise, it will be the first (out of seven) HP printers I've owned that lasted less than six years (in this case, 18 months).

    Hey @Fogbear,

    At this point, I will send you a private Message with instructions on how to perform a reset of programming full semi on your printer.

    Please check your private Messages for instructions. Once the reset is complete, please test stand-alone print to see if the problem has been resolved.

    I look forward to hear from you!

  • Photosmart c410 printing blank pages

    I have a photosmart c410, macbook pro 0sx 10.7.5. T10.7.5. all was swell but all of a sudden my printer put the blank pages.  I can't even test page to print

    Sorry for the delay.  Try to run a printhead, cleaning the printer.  Who needs traffic as it should still ink.  The steps below come from the document Troubleshooting print quality problems .

    Step 3: make sure that the cartridges are properly ventilated.

  • HP Photosmart 5520: Printer prints blank pages suddenly

    Yesterday, my printer decided that he would simply print blank pages with a black line in the middle. I did a test print via the configuration menu and it prints fine. My wife can print wireless. And until yesterday I had no problem.

    On and off, but today, I have the same problem. Help?

    Hi @StuartY123,

    Welcome to the Forums of HP Support!

    I see you are having problems printing from your Mac to your printer HP Photosmart 5520, but your wife is able to print correctly. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    Looks like there is something wrong with the print on your Mac driver. To resolve this problem, we will need refresh your printing system and re - add the printer driver.

    Reset the printing system:

    To begin, I will have you reset the printing system on your Mac. Please click herefor instructions on how to perform the reset. When the site opens, follow the steps under"Reset printing in OS X Lion system" because the steps are the same for Mac OS X 10.10. This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them po do add not your HP Photosmart back in right now.

    Once the reset is complete, proceed to the next step.

    Check and repair your Mac disk permissions:

    1. Open Macintosh HD and go to Applications
    2. Go to the Utilities folder
    3. Open disk utility
    4. Select the hard disk volume, you use (usually on the left)
    5. Select verify disk permissions
    6. Once this process is complete, select repair disk permissions

    Add device:
    1. click on the menu of Apple , then Preferences System.

    2. click on print and scan and then check if the name of your printer appears in the printer list.

    3. click on the name of your printer, click the sign minus (), then remove the printer.

    4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

    5. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the driver of the HP Photosmart camera is selected.

    6. click Add to add the printer to the list. Do not add the AirPrint driver.

    Source

    Once your printer is properly added to, please try printing again to verify that the problem is now resolved.

    Published by Mr X-23source.

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • Photosmart 6510: photosmart 6510 prints blank pages

    Printer was working fine.  Had to change the cartridge. First of all, I didn't have black and now I don't have much color either.  The printer says I had no real HP though now it shows that I do. I never bought my cartridges anywhere but the staples.  Printing October 2012 have changed many cartridges before you buy.  Followed everything I could find.  Still not printing.

    Hi @mjohns390,

    I read your post and see that you can not print in black or color now. I would like to help you today. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

    Please, try the following steps to see if it will help solve the problem.

    Printer cannot print black ink or color ink or prints blank Pages.

    This document is for the cleaning of the cartridge and the contacts, check the tab on the cartridge and the printer reset. "Incompatible cartridge" or "indicated ink cartridge needs to be replaced" message on the c...

    If the problem persists, perform a power reset. A alphanumeric Code (example: ' 0 x 'r' C2...) ") displays on the front panel when printing. Do not take into account the title.

    This model has a permanent print head, this video shows you how to access the print head, so you can manually clean the printer and soak the printhead, it's my own personal recommendation, not one of HPs, is to use the solution proposed in the following videos.  I suggest only doing this if the printer is out of warranty.

    Once you get to the clock at 3:20 minutes, you can stop this video.

    Разборка HP Photosmart 6510 (disassembly Photosmart HP 6510)...

    This video is for a different model but it will provide the steps to move the print head and cleaning, also if you continue the video it will provide measures to remove the print head and soaking. Play video 01:24 minutes. HP 5510 will not print black and color - print head removed and cleaned.

    If you have completed all the above steps and your product still has a problem, service the product.

    I hope this helps. Let me know how make you out. Thank you.

  • HP LaserJet M2727 MFP Series PCL 6 - prints the blank page before and after each document in all cases

    HP LaserJet M2727 MFP Series PCL 6
    prints blank page before and after each document in all cases
    Does anyone else have this problem.

    It must be a preference setting, but I watched three times and CAP does not seem to determine what setting to change.

    See if they help you:

    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c01477176&prodTypeId=18972&prodSeriesId=3377075

    http://h30499.www3.HP.com/T5/printers-LaserJet/LaserJet-M2727-NF-can-I-suppress-blank-pages-with-this-printer/TD-p/2359555

    http://superuser.com/questions/315522/computer-prints-blank-pages-before-and-after-content

Maybe you are looking for

  • Receive error-50251 message when you add a voltage NI Max channel

    When I try to make a measurement with a SCXI-1125 a PXI-6259-controlled, I get the error-50251. This happens in measurement and Automation Explorer, LabVIEW, CVI. I'm almost certain, but I have a conflict DAQmx, fix the system with National Instrumen

  • I can import and edit video clips from Sony in Movie Maker 5 on PC but not in moviemaker 6 on my laptop?

    I can import and edit video clips from Sony in Movie Maker 5 on PC but not in moviemaker 6 on my laptop? in moviemaker 6 it appears as a line across the screen, the sound is ok but the canoe edit because I do not see? can you help me?

  • Add two strings

    Hello world! First of all, I'm sorry for my English because I'm French. So, I want to add to the strings. For example, I have: "GPIB0::13:INSTR." 13 is an array of char called ADD. So I would like to make: "GPIB0:" + ADD + ": INSTR" but I can't! How

  • Photos turning grayscale when moved

    Help! I had PE 9 years. New problem. When I place a photo of the tray in a page, it loses its color. Or if I move one from a page that contains the color photo to a new page, it turns into grayscale. I turned off and restarted the computer and was no

  • Programatically set passivate = true on a transient attribute

    HelloGenerate us the xml viewDef data programmatically and must assign passivate = true on a transitional attribute. No idea how to do this?Jdev version - 11.1.1.7.2Thank youR