My policy has a strange frame

Similar Questions

• When I try to log on my user account, it tells me that the client group policy has no connection

  I have two separate user accounts on my computer. one of the accounts that I can not connect because it tells me that the client group policy has no connection.

  Hello Monica,.

  -What is the exact error message you get?

  -Is your computer connected to a network of area?

  Follow the instructions on the article below to perform a system restore.

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account
  http://support.Microsoft.com/kb/940765/en-us

  Hope this information helps.

• I get a "cannot install printer because a policy has been enabled on your computer that blocks NT 4.0 driver ' how can I install my printer?

  I have a HP Pavilion dv6500 running Vista 32 bit. I just bought a new printer, a HP Photosmart C4640, when I tried to install and connect I get a message indicating that it cannot install printer as a policy has been activated this block driver NT 4.0. I have run all updates of software and drivers, but still get this message. I've been at this for almost a week now. I've been doing the HP race with regard to aid. I am VERY fusturated at this point and desperately need help. What should I do to make this work?

  Hi jessheffernan2003,

  This problem occurs because Windows Vista does not support the installation of kernel-mode printer drivers. Windows Vista only supports installing user mode printer drivers.

  To work around this problem, try to get and install a printer driver as a user on the Windows NT 4.0 computer. If you can not get the particular user mode printer driver, try to get a driver printer in user mode compatible with the kernel mode printer driver which is hosted on the Windows NT 4.0 computer. To get a printer driver updated for the print device, contact the manufacturer of the printer.

  For more information about your hardware manufacturer, visit the following Web site:

  http://support.Microsoft.com/GP/vendors/en-us

  Note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  For more information, see the link below:

  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.

  http://support.Microsoft.com/kb/931719/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• vSphere Client 5.1.0 has an extra frame

  I have a strange error in my vSphere Client. It has a framework within the program. Fixing system is.

  
  How can I remove this framework? It seems that the program loads the program...

  I changed the ID of 20 to 40 for the vSphere Client and restart VMware vCenter Server Appliance, and now it works without additional frame... :-)

• Windows update/microsoft update, access denied to programs, group policy has locked me out of my own darn computer programs!

  Update 2 automatic update was using me on windows and programs microsoft as well, no more! I get only updats on windows and I can't change the settings. I visit microsoft update and it tells me some _ like error 0 x 80070002 # I was at mr difficulty, vista, help and support, ive been online with microsoft online solution and they take me right back 2 where ive already been TO A DEAD END! Ive tried to reset components update has even deleted files off of the data store. Another problem is about reported problems & solutions-i can view all issues and report to them, but if I ever try to view something FORGET IT! I tried many things to fix this but I always get 'THE PAGE THAT YOU ARE TRYING to VIEW CANNOT BE DISPLAYED' quiet similar to internet explore cannot display this Web page. ALSO I can't start or stop a lot of the services on the group policy service, he won't let me do either one! Also, I use WINDOWS VISTA HOME PREMIUM 32-BIT OPERATING SYSTEM. Whenever I visit a solution center it tells me that I can't use solutions on windows vista I have to go to WINDOWS XP for advice. PLEASE HELP ME BEFORE I GO TO THE EXTREME AND USE A HAMMER, IT HAPPENED FOR ABOUT TWO MONTHS AND HIS STARTS TO BECOME REALLY BORING!

  Quote your full version of Windows (for example, WinXP SP3;) Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup.

  [rest of the removed message]

• The Customer Service of group policy has denied access problem

  After the execution of a routine Windows Update as I always do, I was asked to restart my HP laptop (running than Home Premium 32-bit Vista). The only other thing I had opened was a radio station playing music from the internet. I didn't close anything before restarting as I thought he would close himself. So I just rebooted. Like the reboot process that was going on, I noticed that my laptop came into DOS mode and all kinds of lines of text have been created and saved, but I assumed it was part of the updates. However, when I went to reconnect, I was greeted by the following: group access policy Customer Service refused.

  Much I read on the forum and heard that this problem occurs for many. What I read, it seems to have nothing to do with the specific update or that they were installing the software, but everything to do with the user account?

  I had only one account configured, so I was forced to restart in safe mode in order to create a new account. But when I created this new account, it does not appear in the c:\Users[user-name]\Music\iTunes\iTunes. All my user account is a folder owner and a Public folder, and no record has my user names listed in their breast. So I couldn't copy the files from my old username to my new.

  I tried to restore my computer to a different date, but unfortunately, I had too many things on the laptop to create a backup file on the D drive, I never did. I know, stupid me!

  I also tried looking up 'services' in the help section and then scroll to find "group policy client" and that there is nothing listed at close distance from that.

  I've seen a lot of these posts dating from 2008, 2010 and 2011, and I tried just about every does not.

  Can someone help me please? I use this laptop for my home based business and my Quickbooks is. I depend greatly on this laptop, and I need to work again for me!

  Darlene

  Hello DarleneR,

  Thanks for the return of the response.  You have attemtped to enter your boot options and try last known good configuration?   You have a Setup disk for your version of Windows Vista?

  Using the last good known Configuration

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Please let us know status.

• Server extention DW CC version 20141 behavior build on a WIN7 machine has sudenly strange 64bt 6947.

  The extension of server behavior of my version of DW CC 6947 on a WIN7 machine 64bt 20141 has strange sudenly. The + signs to unfold a Recordset are all GONE! (the name of the dynamic content elements in this Panel also show Chinese characters after the dot and between the (). I uninstalled the extention and reinstalled without success (obviously) I contacted Adobe help, but they could not help me. Help, please

  

  CTRL + F10 to open the links that will give you the expected results.

  CTRL + SHIFT + F10 to open the databases window that could be useful.

  Dock of the panels in the usual way.

  Veel geluk!

• I can't connect to my account administrator error: customer service group policy has no logon. access denied

  Original title: i cannot connect to my administrator account

  Hello

  When I try to connect to the administrator account I have this message "group tht the login failure policy customer service. Access denied"what can I do pls

  Hello

  (1) remember you to make changes prior to this problem?

  (2) work on a domain network?

  Step 1: Start the computer in safe mode. To do this, follow the steps below:

  Access Advanced Startup menu options by turning on your computer and pressing the button F8 continuously until Windows starts. In the advanced startup options select Safe Mode

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  
  Step 2: check with a different user profile

  If you do not have a different user account, you will need to create a (see link below).  If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Customer service group policy has no login (access denied)

  I had Windows 7 dell Inspiron 1018 and I thought it would be a good idea to go to 10 Windows but it was slow and I could not do things so I decided to reverte to Windows 7, which began the problem.

  He returned but not all I get is (the Customer Service of group policy does not logon and access is denied.

  I can get it to work again or have I lost all my work and another bit, or should I just buy a new machine and break the hard drive on my little machine

  Any help please

  RJB

  Thank you it worked and I'm back to normal, until the next time. I could buy a Windows 10 for Christmas a gift for me

  Thanks again

  RJB

• my taskbar has become strange after hibernate on windows 7 64 bit

  I installed windows 7 Professional 64-bit msdnaa at my University (deutsch version)

  but I found something strange, after I put my pc for the hibernation
  When I turn on my pc to
  1. the display is flashing and suddenly the task automatically to the basic theme bar
  2. some running programs are hidden in the taskbar, so after I cut, I have to go along the taskbar to find
  is there a solution to this problem?
  Thank you

  Hi Nicodemus,

  The problem may occur if the display drivers are not updated or there is a corruption in the power Plan.

  Method 1: Update the display drivers and verify if the taskbar works as expected.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2: Create another level of power and check if the problem still persists.

  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  Answer please if you have any questions.

• RMAN delete policy has not worked and not delete outdated backup

  Hi all

  I am facing a problem this obsolete backup is not delete unwanted backup.

  I used to take level 0 once weekly and cumulative incremental in 3 times a day.

  I have 2 TB hard drive, every week, I used the backup from command remove obsolete based file can delete based on my redundancy strategy 1.

  The previous week it works fine and deleted obsolete backup based on the deletion policy. but this week when I try to use the delete obsolete command, it is not removed and the hard drive is always full and I couldn't take later backup.

  It's live server, I need to take the free space on the hard drive. Please help me.

  You will find details of error that I met in the log file.

  output channel: C1

  output channel: C2

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of backup so archivelog command at 05/05/2015 10:57:14

  ORA-19502: write error on file 'G:\RMAN\AWSPROCESS\BACKUP\AWSPROCESS\BACKUPSET\2015_05_05\O1_MF_NNND1_TAG20150505T090032_BNJGC9RR_. BKP", the number of block 7227648 (block size = 8192)

  ORA-27070: async read/write failed

  OSD-04016: error queuing an asynchronous i/o request.

  S/O-error: (OS 112) there is not enough space on the disk.

  Your backup on May 02 is not a valid backup, then you can try something like:

  RMAN > delete database backup completed after 'sysdate-6 ";

• Strange Frame Drops with button actions

  Hello

  I am so confused about this

  I have the button in the layer of Framework 1 1 with the instance name: enter_mc

  I also put this script in this context too:

  Stop();

  enter_mc.buttonMode = true;

  enter_mc.addEventListener (MouseEvent.ROLL_OVER, onButtonOvers);

  enter_mc.addEventListener (MouseEvent.ROLL_OUT, onButtonOuts);

  function onButtonOvers(e:MouseEvent):void

  {

  MovieClip (enter_mc), .gotoAndPlay (18);

  }

  function onButtonOuts(e:MouseEvent):void

  {

  MovieClip (enter_mc), .gotoAndPlay (40);

  }

  enter_mc.addEventListener (MouseEvent.CLICK, bobou);

  function bigili(event:MouseEvent):void

  {

  MovieClip (root) .gotoAndPlay (2);

  }

  the problem is, I have some mask on image effect in about 110 images just after image 1 in other layers

  but when I test the movie after clicking on the button of the gotoAndPlay (2) works well, but after that my animation mask played very fast! something like 100 Fps or more!

  I just can I solve this problem by doing one of these options:

  1 - keep the button 1 to 110 images!  and I don't want it because I want only in frame 1 and then click on my disappear just button!

  2 remove

  enter_mc.addEventListener (MouseEvent.ROLL_OVER, onButtonOvers);

  enter_mc.addEventListener (MouseEvent.ROLL_OUT, onButtonOuts);

  scripts!

  I try a lot of script use:

  enter_mc.gotoAndPlay (18);

  or

  ce. enter_mc.gotoAndPlay (18);

  MovieClip (enter_mc). gotoAndPlay (18);

  can someone help me to undrestand why it happened?

  
  

  Add this to your listener function click on:

  function bigili(event:MouseEvent):void

  {

  enter_mc.gotoAndStop (1);

  MovieClip (root) .gotoAndPlay (2);

  }

  p.s. Please check the useful/correct.

• Customer security policy has changed between 11.1.1.2 and 11.1.1.5

  Hello
  I have a set of 5 fire and forget composite who call each other.
  They worked without a cause to the 11.1.1.2.
  I will have security related problems with them in 11.1.1.5:
  
  When I run transport applicant trying to call the applicant to the CBA, I get the following errors:
  
  Anomaly of the non-recoverable system:
  javax.xml.ws.soap.SOAPFaultException: InvalidSecurity: error in the treatment of the security WS-Security header
  
  InvalidSecurity: error in the treatment of the security WS-Security header
  
  
  These mistakes happen one reference to the CBA.
  I had a look at ABC wsdl and compared to the abstract with the live version version.
  
  I noticed that there are a lot of differences between the two. One of them is the presence of what looks like security information:
  
  < xmlns:wsp wsp = "http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:orawsp = "http://schemas.oracle.com/ws/2006/01/policy" orawsp: provides = "authentication {http://docs.oasis-open.org/ns/opencsa/sca/200903}, clientAuthentication {http://docs.oasis-open.org/ns/opencsa/sca/200903}, {http://docs.oasis-open.org/ns/opencsa/sca/200903} clientAuthentication.message" xmlns = "http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:wsu = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" WSU: ID = "aia_wss_saml_or_username_token_service_policy_OPT_ON" xmlns : xsi = "http://www.w3.org/2001/XMLSchema-instance" >
  < ExactlyOne >
  < wsp >
  < sp:SupportingTokens = "http://schemas.xmlsoap.org/ws/2005/07/securitypolicy" xmlns:sp >
  < wsp >
  < sp:SamlToken sp:IncludeToken = "http://schemas.xmlsoap.org/ws/2005/07/securitypolicy/IncludeToken/AlwaysToRecipient" >
  < wsp >
  < sp:WssSamlV11Token10 / >
  < / wsp >
  < / sp:SamlToken >
  < / wsp >
  < / sp:SupportingTokens >
  < / wsp >
  < wsp >
  < sp:SupportingTokens = "http://schemas.xmlsoap.org/ws/2005/07/securitypolicy" xmlns:sp >
  < wsp >
  < sp:UsernameToken sp:IncludeToken = "http://schemas.xmlsoap.org/ws/2005/07/securitypolicy/IncludeToken/AlwaysToRecipient" >
  < wsp >
  < sp:WssUsernameToken10 / >
  < / wsp >
  < / sp:UsernameToken >
  < / wsp >
  < / sp:SupportingTokens >
  < / wsp >
  < / ExactlyOne >
  < / wsp >
  
  
  In my view, that this error could have been caused by the ignition of a security on the composite configuration option.
  Anyone know what this configuration option and how it can be turned off?
  
  Robert

  Robert,
  Yes, PS3 (11.1.1.4) introduced the new security features.

  See the thread on the same topic: Re: policy for the ABC composite No. authentication

  Gerhard

• Mail application has letters strange "Rfu" at the bottom of the issue of the screen

  This showed on my wife 5 with IOS 9.3.1 iphone and wonder if it's been hacked?

  

  If you log on to the account of a browser, this arises? If so, I would change the IPL on the account. If this isn't the case, I would try to reset your e-mail account on the phone.

  First close your Mail application completely from the window of the selector app by double clicking the Home button and drag the email preview pane up until it disappears from the display. Then go to settings > Mail, Contacts, calendar > find your e-mail provider and click on the account. On the next page, delete the account. Then perform a forced reboot. Hold down the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Then go to settings > mail... and to add the account.

• Screen on my Satellite R630 has a strange resolution.

  The screen of my laptop went much paler and more contrast. For example, photos on FaceBook are pale yet contrasted so that people look at oranges.
  This website the text more pale is also very low and difficult to read. East of the sidebar to drag and down its barely visible, what can I do on three lines in it!

  It is certainly not something iv pressed or because I was not on the parameters of the screen for centuries, just checked and they are all as usual.
  IM so worried, everythings much harder to read and I've only had this laptop since Christmas.

  Its a Satellite R630 passing PLEASE HELP!

  Have you noticed that using the browser only, or is it a kind of general display problem?
  Did you notice this when you enter the BIOS when you see the Toshiba welcome screen or when Windows loads?