my printer makes a cracking noise strong; problem with the new color cartridge

Similar Questions

• z index / layer of problems with the new YouTube widget!

  Hello!

  I am facing a problem with the new 'youtube' of social media widget. I currently have two layers in my projects. This is a project for which the menu scrolls initially and then sticks to the top of scrolling parallax. By continuing to scroll, the embedded YouTube video widget does not scroll under the menu as it should but scrolls through the menu. It's strange, as the YouTube widget was placed on level 1 and the menu is at level 2. Shouldn't the menu then always be on top? Only the new widget is not properly defined index-z?

  You can check my web project (and look at the code) here: http://www.firstlight.at

  Any help is greatly appreciated!

  I managed to solve the problem, and I believe this to certainly be a bug in Muse...

  In order to avoid widgets Youtube iframed swim on top of all the other div tags, I had to change the code, add wmode = "transparent" and wmode = "Opaque" to the class of the iframe. This works if you replace all the other parameters behind the CBC "&" by "& amp"tag.

  Here's the original code generated by Muse. This could not prevent my "2nd layer" slip below "Layer 1".

  Makes the following changes to the code, forced the Youtube widget below all other div again (I pinned all changes to "BOLD", so you can see the changes easily):

  Ensure that you do not miss the following change: you need to change all of the vipers '&' to '& amp' this procedure will not work!

  After the new version, I'm sure the Adobe team is working hard to bust of bug last version. But I hope that we will be dismantled soon, otherwise users using the youtube widget will have to recode output Muse whenever we make a change and it is exactly what is the Muse striving to prevent (; After all, in Dreamweaver, you can hardcode the change and he would stick!

  I hope that it will be useful to someone!

• HP Deskjet 970Cse only prints red after the new color cartridge installed.

  HP Deskjet 970Cse only prints red after the new color cartridge installed. I use black HP 45 and HP 78 color. Both are new. I know the printer is an older model, but it works well a month ago.  Any help would be appreciated.

  Thank you for your help.  It was a faulty cartridge.  I pressed a white cloth on the ink source and only yellow and blue were visible, without red (magenta).  I've returned the fabric and cartridge in the store (with my receipt) and managed to get another canister... it worked!  Both cartridges have dates of expiry of 2016.  Glad I didn't have to spend time troubleshooting my printer.

• Dependency problem with the new Blackberry Plugin for Eclipse

  I just encountered a problem with the new version of the JDE Eclipse Plugin. I set up my application project so that it uses two other projects such as libraries. Both of these projects are on the way to build Java in the settings of the application project, and the manufacturer Eclipse compiles without errors.

  But when I try to run on the Simulator, the application loader throws an Exception stating that it could not find one of the classes listed in library projects. Since it is the importation of first class in the main class, I guess that it was unable to find the entire library.

  I tried to have the application project to import the project two library, but nothing alx files has changed.

  In the old version of the Plugin, there is a property of the project "Blackberry project dependencies" or something like that, which should be set for library and rapc.exe projects and the simulator would be their. That went away, and I was told during Devcon now suffice to add libraries to the classpath. Apparently, this is not so for me.

  Can you give me an indication of what goes wrong?

  The problem seems to be that I imported my projects since the previous version of Eclipse plug-ins, Blackberry. I have now created a new workspace and new projects, completely maintaining the source files, and it works.

• IF THE NEW COLOR CARTRIDGE IS INSERTED IN THE PRINTER TO SEE HOW LONG IT TAKES TO CARTRIDGE IS EMPTY.

  OUR HP PRINTER NAME IS J3608ALL ALL-IN-ONE HP OFFICEJET. PORT DOT4_001MODEL CB07QA. OUR OPERATING SYSTEM IS WINDOWS XP, IF THE NEW COLOR CARTRIDGE IS INSERTED IN THE PRINTER FOR HOW LONG TAKES IT FOR CARTRIDGE IS EMPTY. ALSO, PLEASE INFORM HOW MANY A4 PAGES CAN BE PRINTED NORMALLY WITH THIS CARTRIDGE.

  Hello ImranNagoor

  It depends on print quality settings what you use with the printer as well as other factors such as the HP cartridges. You can see the available black and tricolor cartridges available for Officejet J3608 at the following link, including the returns estimated for each Page. To use the least ink use quick project for a print quality.

  HP Suresupply (Officejet J3608)

  Also for more information about how we measure the ink Yield the article below.

  How to give inkjet HP measures page

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• Pavilion Elite HPE-170 t: problem with the new HP DH16D5S DVD ROM drive

  My office is a HP Pavilion Elite HPE-170 t.  I recently upgraded from Windows 7 to Windows 10.  I have two HP optical dirives, one is a writer, and the other is just a DVD ROM  Both have always worked perfectly with Windows 7.  After you have installed Windows 10 continuous burner work very well works correctly with autoplay.  However, the DVD - ROM, HP DH16D5S, immediately began using autoplay.  Actually the drive was not yet recognized as a drive when you view the drives in the file Explorer.  Finally, it would seem, sometimes taking also longer than 5 minutes or more before doing so and then would work very well.  I tried different types of media, including music CD, DVD video and DVD software with the same results.  I assumed that it was a problem with the drive, maybe a bad capacitor, etc., which was originally not start correctly.  So I ordered a new DH160D5S, but which seems to have been a waste of time and money, because it does exactly the same thing as the original.  I even changed the cables autour between it and the burner, but it made no difference.  The burner still works fine but not DVD ROM.  I tried to find a more recent driver for it, but had no chance.  I found on a Dell website for this drive which was an update of the firmware for Windows Vista and Windows 7, but not for Windows 10.  I advanced and downloaded, but when I tried to run, I got the message: "your system does not meet the minimum requirements for this update.  Update has been canceled. »

  I want to try a different brand of DVD ROM, but would have to buy one without knowing if it would help.

  Any help will be appreciated.

  Since I posted this message I discovered that there is a driver problem with this DVD ROM.  There's no driver available yet to make the drive compatible with Windows 10.  Since then, I returned the drive and replaced by another brand that is compatible with Windows 10.

• Problems with the Speedgrade color depth

  Hello everyone!

  As said in the title I have problems with the number of colors in Adobe Speedgrade.

  I would like to color - correct images my drone DJI using LUTs and, of course, build-in Speedgrade tools.

  Unfortunately, the use of the LUTs makes video appearance as there are not enough color-depth because you can see the bands in gradients (especially in the sky).

  I hope you can see the problem in the following screenshot.

  Scratches appear in Speedgrade preview, as well as in video rendering.

  So what can I do to avoid this scratches?

  Thank you in advance!

  Greetings

  Raphael

  

  I have not bought any of the first LUT game I bought... 4 years back, now. Wow, how time flies...

  Why?

  Because I had problems with excerpts from tapes and rarely found one I liked "such what ', so I got to work the clip after you apply the LUT as much as if I started from scratch. So why pay for the dang thing?

  I found it a good common sense many people in publishing & work of colorist, there is a certain tech LUT can really be able to use, but those who are mainly for the spendy 'pro' movie, Reds, Arris and other cameras. For a film DSLR & drone, making its own tends to work MUCH better.

  And it is easy within the Sg.

  Take this clip... watch your litters, first. Move the slider Temp for the position that balances the red & blue tops, cursor Magenta to balance the red & green tops... then left offset slider far a channel can be a little below '0', 0 to sentence above and one a little higher... then with keyboard and mouse or a simple trackball, move the color slider controls rather than wheels "unlock" the trio Offset, match the bottom just above 0, reset the summits if necessary and then return to wheels.

  Move the controls in Gamma Luma needed to feel 'brightness', and you have a a neutralized clip. Shouldn't take more than 20 seconds to do the above, if that.

  Now using color wheels, started working for a 'vision' and of course use secondary as necessary to adjust certain colors/colours/brightness and maybe go to controls Shadow & Highlight to get finer control of two Luma and chroma on the edges... in general, it is best to bring the ends of the scale to neutral even with a look hot or cold for most of the signal.

  Get something you like and can be used for a large number of your clips, save it as an eye. You can just quickly apply to any other work.

  You want to use in PrPro? Easy... with the right button on the Look to the Sg, choose 'Export', and you get to the options... except that say a Cube of however many points you want to and tell him where to save it. I found that with my GH3, sometimes with work in the open air with a sky bright-ish with the Sun around but just outside of an edge banding is quite possible... and 'hand-kitchen' these clips or using a Cube 64 - point is necessary.

  Neil

• Problem with the new update

  Any browser looks graphically unstable and content is empty with the new update, is it just me or is just the update which is unstable?

  Hello

  Try disabling graphics hardware acceleration. You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  1. Click the menu button

     

     then select Options Preferences on Mac or Linux, or Windows.

  2. In the window of Firefox Options (or preferences), click on the Advanced tab, and then select general.
  3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  4. Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• Satellite U500-17F: problems with the new HARD drive

  Hi everyone, I got some troubleshooting with my Satellite and a new drive, I bought recently, because that is already damaged because of too many bad sectors. One is a Western Digital Scorpio Black 320 Bg (WD3200BEKT model number). It should be a fast reader but is not with my Satellite.

  After having mounted the drive in the laptop, I ran a new installation (with full disk format} Windows 7 (64 bit) with all the necessary drivers (that I downloaded directly from the Page of Support Toshiba.)

  The problem is that the laptop needs a lot of time to start and also to disable, and whenever I try to run an application or start a program (for example Firefox, or just a few windows applications), the laptop freezes for about 30 to 60 seconds, the drive no longer works (you can hear leaders put in position 'parking' and the HDD LED control is constant) ", no lights flashing).

  It seems that the drive (during this 30-60 seconds) in something as a stand-by mode. I ran a few Western Digital diagnostic tools and the car looks all right to 100%. It works also without any problems in the other laptop (HP Pavilion DV6500). Could this be a problem with the controller (Intel ICH9M - E ATA AHCI controller) driver?

  Any suggestion?
  Thanx

  Hello

  You use the latest version of the BIOS?
  Please check if you need a BIOS update. Of course I read in a few discussions on the similar question of Win XP you use Win 7 but its value to check the update of the BIOS and U500 series.

  In addition, I recommend check you the power of Windows 7 options.
  Disable in the power profile that you use power saving HDD.

  Just a question:
  You use the option AHCI in the BIOS?
  As far as I know it of possible to use either a compatible SATA AHCI mode.
  AHCI must be used because this option would use full SATA performance.

• Problem with the new installation of Windows XP on the Satellite A100-259

  Hi all!

  I have a problem with the fresh install WIN XP on Satellite A100-259 (PSAA2E).
  I already deleted the partition, formatted (NTFS) and tried to reinstall from recovery disk that initially provided with the laptop. But whenever I try to install a problem is detected (for the most part it's 'page in the nonpaged area failure').

  I also tried to install the OS directly from MS Windows XP Home Edition SP2 CD - the same problem.
  I checked the partition using PQ Magic and discovered that there are ' partition table error #110 ".» So, what I did:

  (1) delete partition-> create new partition-> format (NTFS)-> reinstall from recovery disk-> has not yet;
  (2) partition delete-> install WinXP CD original by create and format partition option-> has not yet;
  (3) delete the partition (using the magic of pq)-> create partition (using the magic of pq)-> format NTFS partition for win xp option-> check partition-OK no problems don't-> installation of original win XP CD-installation without changes-> option failed even once
  (4) delete the partition (pq magic)-> create partition (pq magic)-> format NTFS partition for win xp option-> check partition-OK, no problem-> installation of the recovery disc-> has not yet

  Whenever a different error is detected, so I can't identify the problem. I don't know what to do. Does anyone have any ideas?

  Hello

  Seems that there are some problems with the standards of the partitions.
  A friend of mine has tried to install the OS on the recovery CD on the laptop that has been formatted with Partitions Magic 8 and the installation failed.
  It was very strange

  Finally, we have formatted the whole HARD drive using the CD original Windows XP Pro.
  We did not remove the partition but simply kicked this CD and after the configuration process spent, we formatted the whole HARD disk and install XP without creating all the partitions.

• A fix will come out for the problems with the new OS update?

  A fix will come out for the problems... the beach ball twirling, which began with the new update for the OS?

  Writing an effective question of communities of Apple Support

• H8 1241: problems with the new video card on h8 1241

  OK, I've seen a lot of posts on this topic, but I couldn't find anything yet. I bought this computer as a windows 7, but have just upgraded to windows 10. The stock video card HDMI port came out, so I ordered an ASUS Geforce gtx 750ti to replace.

  http://www.Amazon.com/GP/product/B00IB9P1KG?PSC=1&redirect=true&ref_=oh_aui_detailpage_o00_s00

  When I try to boot with the new card I get the blue screen that tells me to Press esc to get into the BIOS, but it is freezing it (I am not able to get into the bios).

  Currently, the only way to make changes are re - insert my old card. I can not even start without secondary card by using the on-Board (which could as a result of the changes that I made in the BIOS). Most of the solutions I've seen involved changes in version 8 of the BIOS but I can't get that. I tried to update my BIOS to the latest version for windows 7, but I don't think it worked b/c I am on windows 10 now.

  Help, please!

  Hello

  The level of your PC motherboard BIOS is not compatible with the cards NVIDIA GXT 7xx series.

  Contact ASUS to obtain redress. ASUS has maybe a video BIOS update or a different graphics card that will work in your PC.

  A NVIDIA GTX 660 new or used may be your best bet.

  Thanks for posting on the forum.

• SEVERAL problems with the new X 34

  So, I have been active during the overclock.net forums concerning the many problems I am having with my X 34.

  Long story short, I'm back this thing to Newegg and waiting for another delivery. But I thought I'd come at least here because it has high liklihood to return to anyone who cares to Acer. I called their tech support to let them know about the issues, but when the old Indian robot for 2 years at the other end kept referring to as resolution of refresh rate, I decided that I couldn't take more.

  So I took delivery of the monitor yesterday and he initially worked well... but the longer he stayed, the more problems, he has developed.

  My system is one I built a year or two ago and works perfectly with my Dell 3008WFP. Video card is a brand new MSI 980 Ti Lightning. Operating system is Windows 10 x 64. Is a Corsair 750W POWER supply. 16 GB of DDR3 RAM.

  I even made a COMPLETELY new install of Windows 10 on this computer to try to resolve these problems. Did not work. I have disconnected/reconnected everything inside my computer, including RAM and GPU. Did not work.

  And Yes, G-sync is enabled in the NVCP. And Yes, I manually set the refresh rate in the NVCP in correlation with the manual settings on the monitor.

  Problem no. 1: Menu recording does not settings

  -Don't know what the problem is here. But for about 3 hours last night, my monitor would not save settings for serger refresh rate. I would go on the menu... allow the serger... Set it to 100 Hz... Select "Apply and restart. Then (here's the interesting thing I think in hindsight), the screen would flash many colors several times and restart. I assumed that flashing color was normal... but it was never the Predator Logo when it has been reset. The office is finally pointing upwards and I could choose 100 Hz in my NVCP... but when you returned from the settings menu, Overclock was Off back with the default refresh rate. I have nothing would fix it with the reset of the monitor and unplug. Later... I have unplugeed the monitor for 30 minutes and when I plugged it back in, it would save my overclock settings now. It is interesting, but now, when I selected "Apply and reset", he would show the Predator logo when restarting... this logo did not appear before.

  Problem #2: Flashing screen

  -See a video of this question HERE

  -This developed before my eyes. After the initial installation of the monitor, it worked fine. Without no flicker, no problems. But as I was sitting at the dinner table last night, I started to see the monitor flashing intermittently in the other room. I look at the screen, he flickered about 4 or 5 times per minute. For the next hour, he progressed to 30 - 40 times per minute. And subsequently developed in constant blinking. BUT this flicker only happens when I go to the Office at 100 Hz. It happens sometimes in games, but not constant.

  I first thought that I had a bad cable of DP since I used one from Amazon, if I swapped it for the Acer cable included. Nope... same problem. I even inserted my previous EVGA 780 TI... but the flicker that happens too.

  Then, I thought it was a driver problem, I did a clean install of the nVdiia previous drivers. Nope. Then a cleaning installed latest drivers from nVidia WHQL. Nope.

  Then I saw here that you can download the drivers for the monitor directly from Acer. So, I did a guy like an unsigned driver installation. Nope.

  After all this, the problem persists.

  Strange thing about this one is that there was when I first got the monitor but got progressively worse since I got it.

  Another weird thing is that if I have a window open, then it isn't twinkle... reduce the window, and he comes back. It's actually what made me think, it was a driver issue, but as you can see above, I think that I have ruled that that fully.

  Also, if I set my refresh rate to 95Hz or below, the problem occurs. (This is actually how I currently work).

  -UPDATE: the issue has actually started just after executing i1Profiler to calibrate the screen several times back to back. I can't imagine how, but could the rapid exchange of multiple colors full screen damaged electronics somehow? Or is it just a weird coincidence?

  -UPDATED #2: it was suggested that ADC can cause the problem as it caused problems with the previous Acer monitors. So I completely deleted i1Profiler and reset my default .icc profile. I also think that I figured out how to do a monitor factory reset - if you hold the buttons first and fifth, restarting the screen and all the default settings. in any case, does too and the blinking persists...

  #3 problem: Backlight horrible bleeding

  I have to type anything here? Leave some pictures to speak for themselves...

  

  

  Trouble #4: Parts of the screen does not not on

  It has been described elsewhere, so I won't detail it here. But yes, I have the same problem. Here is a representative of my monitor picture when the issue arose.

  

  Overall, I am extremely disappointed, although I can't say I'm surprised. I mean, we deal with Acer here guys... Not exactly known for the high-end products. You can put the red lipstick on a pig...

  So is there more any idea or suggestion out there?

  Until then... I'll wait for my new X 34 excerpt here from Newegg to see if I won the lottery of Acer he...

  I created this post to be a "accepted solution" to this thread with the purpose to help other users who need to find the answers. This should help to find this information faster than to have to go almost 800 posts to find pieces of information.

  Wake up from sleep (backlight) - initial response and follow-up

  Problems with Overclocking at 100 hz - original response

  Coil - Whine Original response

  Color banding - users in Australia reported the problem. The teams in the region to THE have been notified and a firmware is available.

  -Scanning lines Original response

  Thank you
  Cory

• Fuze causes problems with the new Gigabyte mb

  I know this may sound weird, but with assistance from others and a lot of time to put into it, I found that the "rocket" poses problem with my new motherboard Gigabyte EP45-UD3R.

  I was getting problems strange behaviors and reboot, flaky stuff.  Once I reduced to my USB devices I then reduces it to the "rocket".

  Anyone know anything about this at all?

  I would have given this another day before posting.  But I have the answer and it will go here.

  In the BIOS with the EP45-UD3R (Gigabyte is not a brand off but very good Mo and has existed for some time - including Dell has used their) there is a setting under embedded devices.  It's called "Legacy USB Storage Detect". If this option is enabled it will attempt to boot from a USB device. The "rocket", like others, lights up as soon as your PC turn on.  It was trying to boot from the "rocket" and causing flaky problems.  Once that I disabled it the problem has been resolved.

  I should have taken myself.  Arghhh...