my printer was working fine with my computer now it, s will be printed a test page butnothingwhat can I check
the only thing is that it's just want to print
Hello
(1) what is the brand and model of the printer?
(2) you get an error message? If Yes, what is the exact full error message?
(3) is a program-specific question?
(4) you remember changes to the computer before the show?
I suggest you to refer to the procedure described in the following article and check the status of the issue.
Printer in Windows problems.
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Resources for the resolution of the printer in Windows XP problems.
http://support.Microsoft.com/kb/308028
Tags: Windows
Similar Questions
-
My printer was working fine with Windows 7 Home Edition, then it stopped, magenta and yellow print. Ink tanks are full. What bad past and how to fix it?
If you are sure that the ink cartridges are full, then try to re-seats and cleaning the heads - http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=8783
If all goes well. -
Last night I started moving the external files on my PC hard drive internal to one of my hard drives for backup purposes. I've never had a problem in the past with older versions of LR but it's the first time I did it since arriving in LR CC. I moved several 100 RAW files last night with a problem, but as it was late, I stopped. I created LR move that several 1000 files today while I was only to return home and find that most of the files have not been moved and LR, saying that he cannot move them.
I tried to move a small folder of files but I get the same result, I'm quite puzzled by what worked yesterday doesn't work not today or the same as the older versions of LR. Any help to fix this would be greatly appreciated.
Thank you very much
Neil.
Arrgh I'm sorry dj_paige I just found the problem.
Windows has changed the drive letters on one of my external drives and I tried to move the files to a full drive! Not surprising that RAW files would not move.
I'm so sorry for wasting your time and can only apologize for not noticing the problem yesterday, I can only put it down to my own fatigue at the end of a long day.
I now eat a large slice of humble pie and feeling rather stupid.
-
I uninstalled firefox, keeping its data as it is then reinstalled, but it does not appear
'zone alarm toolbar' & ' so think web video downloader for firefox button "...This has happened
Each time Firefox opened
== I reinstalled firefox
Hello SPT.
If you go to tools > Modules > Extensions, you can see the desired extension registered? They may be incompatible, or have been disabled for some reason any.
-
I have a printer HP 8600 pro works great with my computer Windows 7 & computer laptop, but not with my laptop Windows 8.1. When I tried to print wireless (I didn't try connected), it would print only the first pages of 2 or 3 of everything I tried to print. I uninstalled the printer and inserted the CD to try to re - install and I got an error message indicating that the printer does not work with my operating system. I was able to install it earlier, but now, it will not install at all.
Too bad. I'm sorry. I'm went to the HP Support Web site & downloaded a new driver & now it works!
-
Printer was working fine, a lack of ink, he succeeded. Now the printer does not print.
Printer was fine, a lack of ink, replaced ink, now the does not print from the computer. It will print a test page for the printer. He do not print on the computer. Thanks for your help. Max
Hello
You must check with assumption of the manufacturer of the printer, the online documentation and drivers and ask to
their forums (if any) on the known issues.Not really a Windows problem.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
My 8600 remote hp printer will not print. It keeps telling me offline. It was working fine before.
My HP8600 Wireless will not print. It was working fine. Now he tells me offline. The offline icon is disabled. I unplugged the printer and the router. This does not solve my problem. Help
Hello
1. have you made changes on the computer before this problem?
2. do you get any error code or error message?
I would suggest trying the following methods and check if it helps.
Method 1:
Run the HP print diagnostic utility and check if it helps.
Method 2:
Run the fixit from Microsoft Fixit article and if that helps.
Problems printing and printing errors:
http://support.Microsoft.com/mats/printing_problems/
Method 3:
Try the steps in the following Microsoft article and check if it helps.
The new status of the printer is "offline" after you remove a print queue and then restart a Windows computer: http://support.microsoft.com/kb/2027593
Method 4:
Try the steps in the following Microsoft article and check if it helps.
Printer in Windows problems:
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
And also see the following Microsoft Technet article.
Hope the information is useful.
-
How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now with 10.11.3. I would like to restore the previous version of the operating system without losing any data created in various applications since the 10.11.1. Fortunately, I had only to use Time Machine is rare over the years, I do not know if you have to return the entire drive to the chosen date or it can somehow just go back to a previous state of OS. Any suggestions, much appreciated.
-
iMac 10.11.3 continues trying to not start, no chime sound, gray with Apple logo screen, stays for about 5 to 7 minutes, then tries to start again. It was working fine earlier today.
It will start in recovery?
-
Printer was working fine and then stoped feeding. I found a small gear broken wheel on the stack of paper.
Well, your printer is broken. If under warranty call HP.
-
I have a Mac my HP 1022 was working fine all of a sudden I get a message "your printer is not connected" HELP
check the Cable Connection, if you have another pc conect printer to it and check if everything is ok.
-
Hi, can anyone help? My wireless was printer was working fine until what I used it to scan - and needed to use a cable to do so. I can no longer print wireless, Iv'e disconnected from the PC to the printer as cable seemed reasonable. What should I do? Thanks in advance
What printer you are using?
-
My computer says my windows is not authintic but I know that this is what is wrong. I have on my another desktop and it works find but not on my labtop. It was working fine before.
A single license is a single Installation.
See you soon.
Mick Murphy - Microsoft partner
-
Original title: Input device does not, worked very well last week, have not changed anythingHey all,.About 4 days ago, my microphone on my headset was working fine. Then about 2 days ago it wouldn't work when I tried to talk with my friends in Ventrilo.At first, I thought it was micro but then Ventrilo sent me an error message stating that it was in fact my input device and not my mic, so I tested my microphone on my Macbook and it works fine with that.For some reason, the two MIC (front and back) on my PC does not work, I've tested with Sound Recorder and I get a signal, but only few clicks and static. What is strange, is my mic doesn't work, but both of my sound entries are, I can hear sound through my speakers and my helmet which is plugged into the front of my PC. It's as if my PC has somehow isolated both of my microphone inputs and only them turned off but who does not seem plausible given that I don't know that the whole card wouldn't work if there was a problem with her.I have uninstalled/reinstalled Realtek HD Audio Manager.I tried to update the drivers, but they say they are all 'up-to-date '.I feel there is something wrong with control pilots the microphone inputs on my PC. Strange thing is, I haven't changed anything the week last in terms of sound with my PC. I installed a new game, but that's all.Anyone have any idea why this is happening?See you soon.
Hello
You try to run the system restore.
System restore
http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
-
My printer was working fine. When I put in a new cartrege of ink it has stopped working. This is a HP LaserJet M1212nF MPF.
My printer was working fine. When I put in a new cartrege of ink it has stopped working. This is a HP LaserJet M1212nF MPF.
Hello
HP Support Forums:
http://h30434.www3.HP.com/24/7 online for home and individual HP products support | HP support:
http://h10025.www1.HP.com/ewfrf/wc/siteHome?lc=en&cc=us&DLC=en&lang=en&query=DeskJet%202050&tool=&product=topConcerning
Maybe you are looking for
-
How can get answers to the question of security of the apple account
How can I get answers to my account security question?
-
I accidentally added nattly my homepage as well as this nattly Defender. When I change the homepage back to Firefox, the next day, nattly pops up again. Help!
-
How to load a HP Officejet 6500 has? It was lost when the computer store loaded new software.
I don't see a HP Officejet 6500 a Help
-
In LABVIEW 2011 is it possible to do an IMAQ FFT on a color picture? The only thing that seems to work is on the grey scale images. When I try to use a RGB color (U32), the vi-error "Invalid ImageType" FFT image. Any suggestions? Thanks in advance.
-
How can I disable the background music, which replaced radio programs, when my computer is not actively used, for example when I am sleeping? My computer is an Aspire x 1301.