My registration for Lightroom 5. ? all of a sudden, is not valid. What gives?

Similar Questions

• How can I replace a damaged Adobe Photoshop Elements 9 Editor?  I've used this for years and all of a sudden his damaged.  I do not have the CD - can't find it - just moved.

  How can I replace an editor Adobe Photoshop Elements 9 "damaged"?

  I have been using this program for years and all of a sudden - its damaged!

  I have not the CD more if that's how I got it in my Mac.

  I tried to retrieve the serial number through Adobe, but... the account I "had" with Adobe for years has been under a name of ID that I don't remember years ago.  None worked.

  I therefore restored a new account to be able to communicate with Adobe with this name for what to do.

  So, what should I do?

  I need this program.

  You can download the installation program:

  Download Photoshop Elements products | 9, 8, 7

  Your serial number issues will have to be developed with support, so call them.

  Mylenium

• Media Player all of a sudden will not play the dvd. Error message: Windows Media Player cannot connect to the server

  Original title: Media Player all of a sudden will not play the dvd.

  Suddenly, I can't play DVDs on my laptop. The error message is: Windows Media Player cannot connect to the server. The name of the server are may not be not correct, ther server name maybe isn't available, or your proxy settings are may not be not correct. Any suggestions on troubleshooting of Microsofts page appear to be relevant.

  Hi mcraigQY

   

  1. when exactly you get the error message?

  2. you try to listen to music from any remote location or try to play a DVD?

  3 have you tried to play a different CD or DVD?
  4. what happens when you play the same DVD on another computer?

  5. for how long have you been faced with this problem?

  6. the DVD folder that you are trying to play supported by the windows media player is it?
  7. What is the type of DVD that you try to play?

  Let us know the answers to help you best.

• Hi, I have installed sqldeveloper - 4.0.3.16.84 - x 64 with JDK and tried to run SQLDeveloper.exe its does not work. A flash comes and goes. It worked fine until two days ago. Don't know what happened all of a sudden its not working. Need help.

  Hi, I have installed sqldeveloper - 4.0.3.16.84 - x 64 with JDK and tried to run SQLDeveloper.exe its does not work. A flash comes and goes. It worked fine until two days ago. Don't know what happened all of a sudden its not working. Need help.

  I use Windows 7 Pro.

  I have read other threads and tried to launch SQLDeveloper.exe from the CMD prompt, nothing is shown a flash comes and goes.

  Tried to change of SetJavaHome sqldeveloper.conf to the path JDK that it didn't work.

  Please guide me.

  Thank you

  Maybe there is a problem with SQL Developer, being able to write to the network share of desktop directory.  Add the following to your sqldeveloper.conf file to force the settings of the user to store locally also:

  AddVMOption - Dide.user.dir = some_local_dir_to_own_system4.0.3.16.84

  I hope this helps...

• registration for the service is missing & windows update does not not in windows 7

  I got the error "registration for the service is missing or corrupted" when I used the diagnostic download bits of one of your answers to someone else. I can't download the updates of windows from 08/10/16 - the latest downloads on 08/02/16. I did a full scan with McAfee & there is no problem in that. Given that the system sought & found these updates 08/10/16, the fan noise has served continuously as in a loop. I managed to stop that noise will 'services.msc', choose 'windows update', by selecting Properties & stop. If I start it again, it seems to go on and on but updates still do not download. I have Windows 7 Home Premium on a laptop. Can you help me?

  1. have you ever run the McAfee Consumer products removal tool?

  • Fact: McAfee (and Norton) applications are notorious for not not upgrade (or uninstalling) itself. "Leftovers" can be here your troublemaker.

  2 - is the same computer - not necessarily the same problem - as in one or more of these previous threads of yours?

  http://answers.Microsoft.com/en-us/Windows/Forum/all/unable-to-install-Windows-updates-kb3035490-and/a2837314-dd69-422e-9798-2ff937e375d2

  http://answers.Microsoft.com/en-us/Windows/Forum/all/Windows-Update-not-working-error-codes-643/b1dee3ce-9818-4e69-93c3-7b1a9489d036

  http://answers.Microsoft.com/en-us/IE/Forum/IE9-Windows_7/Internet-Explorer-9-not-working-with-some-apps/8dd4ee4a-04F9-4021-a3f5-a3764f403852

• Error: Activation Server unavailable CS2.  Adobe Instructions say to uninstall CS2 and go to Adobe and download the version without the activation number. But when I go that there there is no link for CS2.  All the other suites but not CS2.  This means my

  I just bought a hot Tuxedo Toshiba Qosmio and I installed CS2. I was asked to activate, but received the above error message.  Instructions for Adobe said to uninstall and then install a version without activation hang up. But when I go to Adobe to do it there is no CS2.  Lower than they have is CS3.  It seems that there is no support options for me.  All Adobe ideas?

  CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

• All of a sudden: Preview not available

  Hello!

  All of a sudden out of nowhere my files load in Lightroom with preview not available for this file on all incoming items. I can go to develop and change etc. But why suddenly this change occurs? And there at - it a hotfix or an update or? I almost always load in RAW files and use a Nikon D7200.

  Thanks for your help.

  Marlene

  So the problem is when you import?

  My guess is that there is a problem with the card or a cable/USB Port camera drive; or maybe the problem with the card from the camera. First of all, make sure that all cables from the camera are well connected at both ends. If this solves the problem, can you try a different material and different camera card?

• HP6600: HP6600 all of a sudden do not print

  All of a sudden my HP6600 printer does not print.  Connect wirelessly to my home network without problem with an IP 192.168.0.8.  Computer IP is 192.168.0.2.  All two subnet is 255.255.255.0.  Cannot ping the printer on the network but can ping other devices.  DSL modem/gatgeway changed recently, but all other network functions work correctly.  Have you checked the DSL modem/gateway config and everything seems OK.

  Printer will print the pages of internal test without problem.  Pinter said that he is connected to the network.  Scan Doctor can't find any problems and has not fixed the problem.  Printer and printer driver has been uninstalled completely and the driver has been downloaded and installed on HP website.  Still did not fix the issue.

  Printer is not reachable through browser by IP.

  Strangely enough, my can Android phone to Fing ongoing enforcement see and ping the printer with no problems, but cannot ping the computer.

  Computer is connected to the router.  Printer wireless to the router.

  Help, please... I'm out of options here...

  I ended up solving the problem on my own.  When the new modem/access point was installed, I put the security active wireless for WPA-2 personal with AES and TKIP.  Don't know why, but the TKIP was the origin of the problem.  I changed the AES security only, and the problem is solved.

  Now, printer works properly and is considered by my other devices my network wireless and wireline portions.

• Fujitsu Siemens AMD computer even will not start all of a sudden upward (not!) - loop

  Hi all

  My computer has always worked great and I have a valid version of 32-bit Vista Home Premium .

  My computer runs on the following specifications:

  AMD Phenom 9500 + 2.2 ghz QUAD

  RAM: 4 GB of Ram

  Graphics card: ATI Radeon HD 3850 512 MB

  Motherboard: AMD 690 G

  Yesterday, I was on my computer as usual and was on a server VOIP talk to my friends. As I'm holding down my push-to-talk button all of a sudden, my computer restarts and every 1-2 seconds in the restart it restarts again.

  It does not have any bios loading screen and nothing.

  I opened and cleaned everything but I could not find any problem. Any idea? It is literally on autoEVERY 2 seconds... he just constantly made the sound of a computer restart like as thought I would be pressing the button like a maniac.

  If it helps, I think my computer was on during the night and the following day until 02:00 so so well over 30 hours.

  Any help asap would be crucial.

  Best regards

  Counterfire

  PS I am writing from my laptop: p

  So! Finally, I've isolated the problem for now.

  I have 2 different memory channels (purple & orange) and channels 2 & 4 If you count the farther away from the CPU does not work which means that I had to remove 2 GB of RAM

  Looks like the solution for now is to use my pc to 2 GB. I will update to WIN7 tonite, then ill try using two sticks again but I think ill have to buy 2 x 2 GB instead of using 4 x 1 GB that I used to use...

  No idea how to solve this problem with the ram slots?

• HP Officejet Pro 8600 has all of a sudden is not recognized by only my computer at home

  Hi, I have 4 laptops in my house. We have all been connected wireless to my HP printer for over a year. All of a sudden, for some reason, my computer no longer sees the printer. I have an ASUS. I run Windows 7 with the Windows Firewall. My router is a Linksys EA3500 age of 3 months. I can print from each another printer at home, and I can also print from my Android phone. However, when I try to print from my laptop, he says now that it detects a printer has been turned off.  I did everything that I can think of to fix this. The only changes that I had recently installed program AV of Webroot. I can't be 100% certain, but I'm sure that I printed from this facility, and all the other computers on my network use Webroot as well without any problems. Hoping for help. Here's what I've done so far:

  1. Tried troubleshooting printer via the computer. He went through control of the coil and all service that the standard troubleshooting only. It says something about my printer is off. It certainly wasn't, but I unplugged and rebooted just to be sure. No solution.
  2. Noticed the IP has changed on the printer and thought that maybe something with dynamic vs static (don't know much about it) so went to 'update IP address' on my laptop and updated info. Checked the info of the router settings by entering the IP address of the printer in the browser. Printer shows connected and ready and everything seems good. I ping the ip with the results. Mac filtering is not enabled, so I don't need to deal with this. SSID is not hidden. 802.11 configuration indicates that the network type is WPA - PSK WPA2 with AES selected for encryption. As always, it has been.
  3. Double checked to make sure printer was recognizable by my firewall. It is on the accepted list.
  4. Last resort: I uninstalled the printer software and removed the device from my laptop. Attempt to reinstall, but when it gets to the part where it is supposed to search for the printer, it says cannot find. I enter the IP address of the printer and it does not always find. I enter the host name, and it does not always find. As I uninstalled it, I can no longer install the printer at all.
  5. Then to airline pilots and I tried using the installation via the online option. same results. "Cannot find the printer.
  6. I unpugged the printer from the wall, again, this time for more than an hour, hoping that it would reset, but visiting this probabaly account is not the problem since any other laptop can print in my house.
  7. Tried to plug in the ethernet cable and the printer this way. Plugged one end router and another printer according to the instructions of troubleshooting tips. Software disc and it does not install the printer. Change IP address on the printer when I use ethernet and I entered new ip accordingly.
  8. Reset my modem and rebooted. Resetting my router and then used software to reconfigure. do you have the standard "wait ten seconds and a plug in back and restart the computer". No solution.
  9. Check my network wireless adapter setting to make sure that I have more updated drivers. Yes.
  10. Delete everything that relates to my printer in each folder and in regedit.
  11. Tried to reinstall printer wireless both with ethernet. Unable to find the printer so be it.

  I haven't changed any settings I can think of since the last printer worked a few weeks ago. As I said, all other computers print perfectly. The only thing I can think of that is different is all oher laptops running Windows 8 and I am always on 7, but it's not serious before, and I can print from the HP printer on my phone software.

  Please someone tell me what I'm missing here. I'm going bonkers. Thank you very much to everyone who takes the time to answer on this support forum.

  Thank you very much for your detailed answer.

  I put a static IP address on my printer to 192.168.1.3. After several attempts to install the printer I just couldn't. I decided to run combofix and after that and a reboot I was able to install the printer successfully. Everything went as it should work. IP address is. I thought I was finally going to solve this problem. Then, I hit print a document and it doesn't have same queue in the printer.  I remembered that I read on how you need to go to the printer properties and make sure that the printer is on the TCIP port with the IP address. That was the problem. He had the bad IP. I changed the IP of what I changed to manually and voila. I print again.

  I think everything that happened during the changed dynamic configuration ip 192.168.1.110. I don't understand why all Win8 computers in my house didn't get affected, but I'm just glad that affecting an address static IP did the trick. It has been weeks since I've heard this thud hit sound of my printer from my computer.

  Thanks again for your help.

• QNXStageWebView all of a sudden does not work

  My application has been live for some time on the shelf.  All of a sudden I get emails and critical users wrong by saying that it doesn't.  It uses QNXStageWebView and the problem seems to have been reduced it.  Were there changes in system in recent weeks that have caused this?  Thanks for any info anyone can provide.

  Problem solved guys.  Nothing to do with BB PB.  It turns out that YouTube disapproved a api that I had used.

• My Media Video blackBerry smartphones and music ALL OF A SUDDEN are not supported

  I had my Style for 3 weeks and Yes, I have experienced the same issues that everyone else with a short battery life, internet speed and freezes, but what I really am becoming frustrated on is all of a sudden none of my material imported from the card memory or those integrated in the phone are going to play, I get a media type of message of the United Nations supported

  is sounds like your memory card is damaged and must be in the format KB10527. I would even recommend that you perform a security erase or reload the operating system on the device using the Manager Office b/c you say that the appliance is cold.

  or your device is a phone of the company located on a BES server and there is a strategy there that is causing the problem.

  If anything else - try a reboot - traction battery - or hold down alt, shift to the right and led.

• All of a sudden will not start Photoshop [on a Macbook Air]

  Hi all

  I'm on a MacBook Air with OS X 10.10.2 and I use Photoshop once a month, but now I really need, and it does not start:

  -As soon as I click on the Photoshop icon I get "Unable to open Adobe Photoshop CS5.1 because of a problem." And when I click on the "Report" button... "I get a very technical message (see below).

  -J' used Photoshop on this machine for about a year without problem, but recently I had a problem and needed to recharge my Time Machine backup.

  -I don't know if the problem occurred immediately after the restore or not.

  -J' read countless discussions on various forums, but nothing explained my problem exactly. I suspect a problem with my paths and permissions (since I read a report that restoring from a TimeMachine causes these problems sometimes), but I don't know which way is corrupted/missing/illegible.

  -J' tried to create a new account admin and Photoshop from here. It did not work.

  -I don't mind reinstalling, but I don't have a picture of the installer. I started with Photoshop 6, then updated to CS2 and CS4 and CS5. I have all the serial numbers but not all the images-updated.

  I would be grateful for clues on how to diagnose further and some problem.

  Thank you very much in advance!

  Bojidar

  -----------------

  And now, here's my exact error message:

  Process: Adobe Photoshop CS5.1 [12426]

  Path: / Applications/Bildbearbeitung / * / Adobe Photoshop CS5.1.app/Contents/MacOS/Adobe Photoshop CS5.1

  ID: com.adobe.Photoshop

  Version:?

  Code type: X 86-64 (Native)

  Parent process:? [1]

  Responsible for: Adobe Photoshop CS5.1 [12426]

  User ID: 501

  Date/time: 21:53:39.840 2015-05-03 + 0200

  OS version: Mac OS X 10.10.1 (B 14, 25)

  Report Version: 11

  Anonymous UUID: A0DC6EA7-1973-1B68-EFC7-5D60106F084D

  Sleep/wake UUID: 1FA6367C-EEB2-4F46-8773-EBB176EAEAC7

  Time since started awake: 230000 seconds

  Wake time: 2900 seconds

  Crashed thread: 0

  Exception type: EXC_BREAKPOINT (SIGTRAP)

  Exception codes: 0 x 0000000000000002, 0 x 0000000000000000

  Request for clarification:

  dyld: launch, loading of the dependent libraries

  Dyld error message:

  Library not loaded: @executable_path /... / Frameworks/adobe_caps. Framework/versions/A/adobe_caps

  Referenced from: / applications/Bildbearbeitung / * / Adobe Photoshop CS5.1.app/Contents/MacOS/Adobe Photoshop CS5.1

  Reason: image not found

  Binary images:

  0x7fff6f1c1000 - 0x7fff6f1f7837 dyld (353.2.1) < 4696A982-1500-34EC-9777-1EF7A03E2659 >/usr/lib/dyld

  Model: MacBookAir6 2, MBA61.0099.B18 of BootROM, 2 processors, Intel Core i5, 1.3 GHz, 4 GB, MSC 2.13f15

  Graphics card: Intel HD graphics card 5000, 5000, Intel HD graphics card integrated

  Memory module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x80AD, 0x483943434E4E4E384A544D4C41522D4E544D

  Memory module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x80AD, 0x483943434E4E4E384A544D4C41522D4E544D

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 117), Broadcom BCM43xx 1.0 (7.15.124.12.10)

  Bluetooth: Version 4.3.1f2 15015, 3 services, 19 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en0

  Serial ATA Device: APPLE SM0256F, 251 GB SSD

  USB device: Memory card reader internal

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  Bus crush: MacBook Air, Apple Inc., 23.6

  Always try to reset the preferences the Photoshop touches like your tryind usins to launch Photoshop.  Toy cabin also use Windows explore or Mac finder deleteor you rename Photoshop preferende userid if you change you preferences of OS to be able to view the files and folders hiddeb. Have you read the link I posted?

  Restore default preference files

  In this video, learn two methods of resetting your default return preferences files: deleting files preferably manual and shortcut keyboard method (which begins at 05:05)

  by Julieanne Kost

  To restore preferences quickly by using a keyboard shortcut:

  • Press and hold the keys Alt + Ctrl + Shift (Windows) or Option + command + shift (Mac OS) you launch Photoshop. You are prompted to delete the current settings. New preferences files are created the next time you start Photoshop.

  Note: Using the preference files for custom shortcuts, keyboard shortcut, workspaces, and color setings will also reset to zero by default.

• LR Photo import from the camera all of a sudden does not (5.7.1) - says "some import operations were imported not because they could not be read."  Work on another computer and the version on the same computer but not newly LR 4.3 installed LR 5.7.1 cm³ 2

  As above, all of a sudden, on a single computer I can not download from the Canon 50 d or 70 D in LR 5.7.1.  It will download on another computer, as well as on this computer in an older version of LR (4.3).  As soon as I put on the computer this morning, I also got an error message that "the catalog named Lightroom ' catalogue Lightroom 5" cannot open another application already opened it. "It's a cold start, so I'm not sure what's going on.

  "Could not be read" means that you do not have a WRITE permission in the destination directory, then change your permissions.

  "Another application already has its opening" can be solved by removing the .lock file in the same folder as your catalog file.

• My coupon code for my free upgrade says that it is not valid.

  I bought the Design Premium Creative Suite 5.5 in the time limits for the free update and received an email telling me what to do, but when I click on the link, it tells me 'Code promotional invalid in this store.' I bought the student/teacher edition, so it's in Adobe for education - Bank of America, but I read all the fine print and he said that those who were included in this promotion, receive email first. Following the directions, I added the upgrade to my cart and it remained the full price to upgrade.

  No idea why it won't let me have my update?

  I used a different browser I had not spent on the Adobe site with and got through that the use of the commercial bank. Otherwise it is not actually allows you to change the store, because he gets everything right whenever you bought if, regardless of if you are connected or not.