My router wrt120n will not connect to my ps3

Similar Questions

• Satellite L350-14F find the router but will not connect

  Hello

  I just bought a new laptop Satellite L350-14F, but I can't seem to connect to my connection wireless broadband.
  My roommate's laptop connects fine.

  The mine finds the network, asks for the WEP key but will not let me.

  I am running Windows Vista SP1.

  Can anyone help?

  Hmm. I recommend you to check the settings of the WLan router.
  If the MAC address filtering enabled and that your WLan MAC address was not included in MAC address filtering, then you would not be able to connect to the router.

  It would also be possible that you try to insert an incorrect encryption key

  Therefore, it would be desirable to disable all the security settings on the router and then try to establish the WiFi connection.
  If this would have functions, then you might reactivate the WLan security settings.

  By the way; Check if an update of the Wlan driver could also sometimes there is some compatibility problems between the Wlan router and Wlan card drivers.

• WRT120N will not connect to internet

  Hello

  My router was working so far. For some reason, I disconnected the internet cable and plugged. After that, it does not connect to the internet.

  Based on the forum I acceded to 192.168.1.1, it will display the administration page. I have reset to the factory settings and turned off the router for a while and turned again but it does not help.

  This problem is not only withmy laptop computer. Grateful if someone could help me solve this problem. Thank you.

  Kind regards

  Combot.

  If you have DSL connection, these 2 reasons may be applicable. It's either you must assign the PPPoE router (you must have a username and a password from your service provider.) Or you might need to change the local router ip address. For more information, please visit this link

  http://www6.nohold.NET/Cisco2/UKP.aspx?VW=1&docid=20ee1457387f40178cd5f41d4b585db4_3687.XML&PID=80&r...

• My IPad is connected to the WiFi router but will not connect to internet. My Internet works on my IPhone and Mac Book

  Since last night, my IPad connecting to my WiFi router, does not connect to the internet.

  Internet connection works for my IPhone and MacBook.

  Hello

  Go to settings resets the network settings on iPad.

  After reset, enter your key wireless router.

  See you soon

  Brian

• L850 satellite will not connect to Wifi

  Hi, new here.

  I have a Toshiba L850 which does not connect to wifi,
  Many other devices in the House and the L850 was last week.

  You can see my router but will not connect.
  It is the 'limited access' connection, but not more.
  Said troubleshooting couldn't identify the problem.

  When I try and access the Device Manager, I get a "Explorer.EXE" the specified service does not exist as an installed service?

  Help.

  Paul.

  > He sees my router but will not connect.

  I guess that your router is secured by encryption (WEP or WPA / WPA2)
  Test WiFi connection without the use of WLan encryption settings.
  Turn off in the router settings and test the connectivity.

  Of course you need to do that just for test purposes because it s not advised to use the unsecured WiFi.

  Where you have no problem to connect the laptop to 'open' WLan, I recommend changing the encryption type.

• HP b209a printer range will not connect to router comcast using the WPS button

  HP b209a printer range will not connect to router comcast using the WPS button. I try to use a new Comcast router (technicolor TC8305C). When I try to connect the printer times out and says that no connections are when I check for wireless connections. Yet, when I print the network configuration page, the SSID for the new router is at the top of the list. I reinstalled the software by the support of Comcast, but it did not help.  I'm ideas please help!

  Thank you

  Never use WPS to connect.  If done it should be disabled in the router for security reasons.  Connect manually via the SSID and password following the instructions in the manual.

• Lexmark printer will not connect to the router

  Original title: HELP

  I switched to Fios and now have a new modem/router and I don't know how to get my Lexmark printer to recognize. How can I solve this problem?

  Hello

  Thanks for posting the question in the Microsoft Community!

  The Lexmark printer will not connect to the router/modem.

  Because the problem is with the Lexmark printer cannot connect to the router, I suggest contact you the Lexmark support team in order to get help with this question.

  You can try to get help on the site:

  http://support.Lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=en&UserLocale=en_US

  If you need any help or if you encounter problems with Windows in the future, let us know and we would be happy to help you.

• HP deskjet 2540: HP 2540 printer will not connect to new router

  Hi, we just changed internet service providers and the printer will not connect to the new router, our HP laptop computer presents the printer in the list of network devices / wireless, but will not accept the password of network to the router when I ask him to connect. Makes me crazy! I have re-installed software etc. to connect the drive and make me anywhere I hope someone can help!

  Dave.

  Replacement/change your wireless router, try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Make sure that your router is set to a fixed channel wireless as the 1, 6 or 11, never 'auto '.  Try channel 1 first and then the other one at a time.  Make sure that the printer and the router are spaced at least 5 feet.

  However, if you have a gateway device (modem + router), all gateway devices are terrible for connectivity and wireless performance.   If this does not work, suggest you put this bridge in full bridge mode device and install your own router of high quality that YOU have full control over.

• behind the bridge router will not connect.

  Im trying to set up my network like this, Modem > ROUTER1 > bridge > ROUTER2 > PC

  Both routers are WRT110 and the bridge is a WET54g.

  I can access the internet if I plug the power cable directly into my PC from the bridge, but when I plug it into the router it does not connect to the internet. my pc can also connect to ROUTER2 without problem but can not get internet.

  This could be established with only 2 devices... WRT110 router and bridge WET200... WET200 bridge has five ports to connect safely separate wired networks...

  With your existing equipment, cela -.

  Connect the second router Internet Port WET54G and access your router installation... Change the router LAN IP address 10.10.10.1 and click on save settings... Turn off the router for a minute and turn it back on... You should be able to connect your computers wired to your router's ethernet ports, and they need to connect on internet...

• iPad will not connect to internet

  Hello

  Recently I replaced my router wireless with an old faithful that d-Link DSL - 502T cable modem as I have now 2 extreme airport to handle a Wi - Fi. I have now a much faster internet access on my Macbook Pro, but my iPad 2 now will not connect to internet.

  Airport utility on the iPad shows that the internet is disconnected, but I don't know how to solve this problem.

  The two airports are configured in Bridge mode. Help someone?

  If you have LAN - 502T running as the main router.

  Bridge the airport should simply pass the DHCP via the Dlink but sometimes it's a failure.

  The two AE connected directly to the modem or the other?

  I would recommend the static method of intellectual property.

  https://discussions.Apple.com/message/25135547?ac_cid=tw123456#

  In this method, you must first AE plugged directly to the Dlink and the second AE connected in the first and bridge... it will dhcp to EI and is often a better configuration with Apple gear. Worth a try.
  

• HP Officejet 6500 a: printer will not connect to the wireless network.

  I got this HP printer for a while and it worked fine.  Our old router is out and we had to get a new one.  Installed perfectly and printer continued to work properly.  The password for the router was ridiculous, that's why I changed it to something much more simple to remember.  Since then, my printer will not connect to wireless internet.  I have a ~ and reinstalled the printer but still have the same problem.  I thought maybe to try the former password would, but who does not work either.

  Anyone has any ideas that might help before chuck it and go and get a new one altogether?

  Thank you.

  Easy things first.  Turn off the router and the printer.  Turn on the router and wait 3 minutes.  Turn on the printer and see if it connects to your router.  Status?

  If no joy, temporarily disable all security in the router.  Now try to connect the printer to your SSID not guaranteed without password.  Status now?

  If OK, go back and add WPA2-AES with your simple password.  Status now?

• My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

  My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

  Not knowing what the 'followed the steps posted' have been

  The iOS device connects to other networks? If Yes, which tends to indicate a problem with your network.

  The iOS device sees the network?

  Error messages?

  Other devices connect now?

  The iOS device has connected before?

  Try the following to rule out a software problem:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Power off, then back on your router

  . - Reset network settings: settings > general > reset > reset network settings

  - iOS: troubleshooting connections and Wi - Fi networks

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  - iOS: recommended for WiFi routers and access points

  -Restore from backup. See:

  iOS: how to save

  -Restore factory settings/new iOS device.

  If still problem and it does not connect to any networks make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• C850 satellite will not connect at 5 GHz WiFi

  My Satellite C850 found network 2.4 GHz Wireless and connected flawlessly. However, it is not 'see' the 5 GHz network, even if the router is in the same room and about 2 meters from the hotel. I have a problem, or in this laptop's wireless adapter will not connect to this speed? Any help appreciated, please

  Hello

  I think that the reason why your portable computer does not see the 5 GHz Wlan is simply.
  The wireless network card does not seem to bear the 5 GHz.
  The WLAN standard 802. 11A supports 5 GHz

  If the wireless network adapter supports 802.11 B / G and N or 802.11 G and N, then only 2.4 Ghz are supported.

• HP 7520: HP 7520 will not connect to the wireless network

  There is some additional information to

  http://forums.Xfinity.com/T5/home-networking-router-WiFi/HP-7520-will-not-connect-to-wireless-networ...

  on this issue.

  Have several APs for a single wireless network allows the printer foolish law.  (Not a Repeater, a second AP connected to the local network with the same configuration of network for security, etc.).

  I solved this problem.  In accordance with the discussion on the link, the problem is that the printer cannot connect to a wireless network if there is greater than 1 for a wireless network (SSID) name wireless access point.

  This thread has had several useful suggestions, but what finally solved the problem, it's the second point has access to a mode where I can create a 'virtual' access point and, above all, a SSID associated.

  Note that not all access points or routers support virtual APs, but this function seems to be more common over time.  Older models is not able to do that.  However, a new access point is sometimes cheaper than a new printer.

  If you do not understand the jargon in the procedure below, I recommend that you find someone who does, then they can do it for you.

  Solution:

  1. On one of the wireless access on the network, create an a new virtual AP with a slightly different name SSID (for example < name of the network - > _1), on the same VLAN (usually VLAN 1).  You may need to put the AP in "multiple AP mode" or something similar, and then restart the AP.  All other settings (DHCP, security, mixed mode b/g/n, etc.) must be the same for the new SSID.
  2. Run the printer Wireless Setup and connect it to this new SSID
  3. Confirm that the printer can be seen by other devices on the network

  Tips:

  • Check the security is the same as the original SSID, Alternatively you can create a vector of insecurity in your network.  Do not WEP-128 when the other SSID uses WPA2 AES, for example.
  • The AP I had had several resets to make it work because of the mode and parameter changes.
  • If you connect the SSID but cannot connect to or be seen by anything on your network, check the new SSID/AP is in the same VLAN as the original.
  • Because the printer is not roaming, and the speed is not a problem for me, I used the access point that could support this solution, which is deeper and slower than my primary AP.  I have not noticed any problems.

  The printer has been reliable on the wireless now on the new SSID, 48 hours.

  I have not upgraded any software on a client of the printer (PC, Mac, phones).

  I think that it is a positive confirmation that the problem is with the implementation of the printer of the stack of network and not with the driver or client software on remote devices.  The 802.11 protocols provide for a network name (SSID) wireless with several access points using different MAC addresses.  I suggest this HP look into this as a potential bug with their network printer for the 7520 protocols stack.

• WIFI on my C850 Satellite can detect the network but will not connect

  I just bought a satellite C850 - PSKCCA-02D00M

  The connection to the LAN works fine however the Realtek RTL8723AE without wireless/Bluetooth will not connect to the network. It can can detect them just does not connect. I used the troubleshooting, and he cannot sort.

  All other devices connect very well as Iphones and Kindle

  In the config is doctor says that the adapter is enabled in a domain and in the adapter another status is down.

  I took back to the initial power and installing and unistalling and reinstalling the adapter using the driver on the website.

  Any help is welcome. I don't want to have to take back just for this issue

  See you soon

  Your WLAN is locked? Can you connect WIFI if you delete the WIFI password for two minutes?
  Have you tried to reboot your router?