My Sansa clip + does illuminate what so ever

Similar Questions

• Sansa clip does not play flac frimware is 1.1.30f1 how to solve this problem

  Hi all

  Sansa clip does not play flac frimware is 1.1.30f1 how to solve this problem

  I need software to convert mp3 to flac, please guide me because I want to test flac on sansa clip

  Thank you

  He plays very well FLAC.  There is probably a problem with your files.  They are not coded correctly, or you use the ID3 tags.  The Clip only supports normal Vobis comment tags to FLAC / Ogg.  Mp3Tag should be able to fix your labels if that's the problem.

  In addition, there is no reason to convert MP3 to FLAC.  It will sound the same as the MP3, but you will have much larger files.  If you want to get the advantage of FLAC (or any lossless format) you will need to rerip your CDs.

• Sansa clip + does not see the audio books I have loaded

  I got my Sansa Clip MP3 player + for two years and it works very well, so far.  I only use it for audio books.  Recently, I reformatted the player and loaded new books in.  When I went to read, the audio books folder was empty.  I have connected the player to the computer again, and the books were in the audio books folder, where I had loaded.

  I've updated the firmware to the V01.02.16A Version, and there was no change.  I tried to reset by pressing the start button. No change.

  Memory has 3750 MB with 3135 free, indicating that there are books in memory, but the player does not see the.  What is going on?

  That's all!  I checked the format of audio files.  It is the AAFC, with suffix .m4a.

  The Sansa manual says:

  "The Sansa® MP3 Player will support MP3, WAV, WMA, secure WMA, FLAC, Ogg Vorbis and audiobook formats.  I guess that AAC is not one of the formats that they support.  So I have to convert .m4a to .mp3.  I guess there are a lot of tools to do it.  Any suggestions about which one is the best?

  Thanks a lot for this revelation.

• My Sansa Clip does not work

  I use my Sansa Clip when I work at the YMCA. I used it last night and it worked fine then. This morning when I went to the O, it didn't work at all. Once I got home, I plugged into my computer. It still does not work. Why it does not work and I can fix it?

  How about a magic Sansa?

  Slide the switch to position IT and hold it there for 10-15 seconds.  If you have sensitive headphones, you can hear a "click" soft as the device resets.  It is the function of soft reset .  Your Clip should restart normally after the reset.  Try to turn it on as usual.

  µsansa

• Sansa Clip does not

  My sansa clip is on but can not receive music or bring up the menu. What's wrong?

  Is this new? You take off the sticker of the shield? Say the screen if there is no menu? We cannot read your mind; you have to tell us more about this if you want any help.

• Sansa Clip + does not start or is not recognized by my computer.

  I listened for the Sansa Clip + to work for about two hours after charging the battery. It stops all of a sudden. It will not turn on, nor is it recognized by my computer. I tried a soft reset by holding the power button and I still get nothing. I tried to connect to different computers and different USB ports on each computer. I can also load with another cord which is not read.

  Any help would be appreciated, thanks

  Have you tried holding down the power button (some say 30 seconds, but I don't think he'd be as long) and then releasing and clicking it normally? This is what worked for me both times as my Clip + died spontaneously.

• Sansa clip + does not load correctly

  My sansa clip + acted weird lately. When my battery runs out and stops automatically my sansa, I just go free. It takes about an hour to go from 0% to about 65%. but after that, it slows down the charging process a lot. in two hours, it will go up only about 10%. my computer is marking battery bad? also: so that my computer "Refresh" the battery I have to unplug the usb and plug it back in. all tips would be appreciated, thanks

  It's the way they are supposed to work. When the charge level of the battery increases, the load in the drive circuit slows down the amount of fees being accepted since the source until it is just a trickle. In this way it does not generate too much heat build up that is detrimental to both the player and the battery itself.

  And Yes, if you connect in MTP mode you can see the level of charge on your computer. But it will not refresh unless you disconnect and reconnect. Besides, you can see as well information on the player screen if you need to see a real battery level percentage. But it still takes say connection of your computer to see this.

  I think that if you use a charger AC - UCB this info is at your disposal, even while charging. I don't know if it updates in real-time, however.

• Sansa Clip does not pass the stage of audio books

  Dear all,

  We have the problem that our Sansa Clip will not skip chapters of audiobooks. If you hold the buttons, fast towards the front/rewinds, but if you just click on it once, nothing happens. It is only in the audio books and Podcasts, but not in music.

  However, we have already owned a Sansa Clip 8 GB, which worked very well. Then we bought a second one (also 8GB) with the problem described. The strange thing: the same audio books work very well on the other Sansa Clip (same firmware version). Also strange: jump works with music files, so it may not be a hardware failure. However, we discovered this last don't bit recently, we already have it back and got another Sansa Clip 8 GB (third). Yet once again, jump does not work. I am suspecting that something with the files is wrong, but I'm intrigued by the fact that they work very well on our first Clip. They all have the same age, our first clip is just a couple of weeks and they all came from the same supplier (Amazon), so I guess it's the same batch.

  The clues someone?

  Thank you very much
  André

  I think that you have access to the setting if you press the button in the 6 oclock position while playing an audio book. I think that there is a choice of menu for the settings of the audio book or chapter. I don't have the video right in front of me now, so I'm not sure about this.

• Sansa Clip + does turn on at all!

  My Sansa Clip + (4 GB) will not turn on. I tried:

  • By pressing the power button while up to one minute
  • By pressing the power button and the Middle up to one minute button for
  • Plug USB wall adapter
  • Connect to computer

  No sign of life at all.

  I loaded full yesterday and I used it this morning, but an hour later it just stopped working.

  Help, please!

  I found the problem:

  Sansa clips don't work not in sous-zero temperatures, and when they fail, they are not off, so it's a combination of battery flat and temperature.

  FIX: In a setting slightly warm place (sometimes several days) just leave it plugged and turn it on.

• SANSA CLIP does not show as acknowledged when it is plugged...

  My Sansa won't display as recognized when I plugged it in. When I look in Device Manager, it shows a yellow question mark next to it, only iv tried firmware update but its not working not suggestions? I am running windows XP Professional, version... Thank you... Josh

  Can you connect USB MSC mode?  (On the Clip, under settings (press the small button at home and then click down), go to USB mode and select MSC.)

• Sansa Clip Zip battery does not charge, goes directly to the screen of the song

  It's my third Sansa MP3 players.  The first was a Sansa Fuze with the round button.  Like that one but my husband needed more that I did it I gave it to him.  He is old, but the player is still so today.

  The second was a Sansa Fuze + with the touchpad.  The touchpad has been way too sensitive but I need to play only two songs for sleep therapy while I was fine with it until the battery suddenly stopped charging a few months ago, I posted my problems in the Sansa Fuze + forum.  After trying a few suggestions, I finally accepted that he was a Goner.

  I bought this Sansa Clip Zip 4 G, thinking that should last at least for a while because I use every day.  In fact, I needed only when I had disorders of sleep during the night;  I probably used it once every two weeks or more.  I used my cell phone to the device, had no problems until now.

  The last time that I loaded it was 2 weeks, to 98% full - the thing never indicated 100% while it was a little weird.  In any case, I had problems sleeping two nights ago so I took out the Clip Zip and noticed that the battery still had plenty of juice left.  This morning I checked the battery, he had 68%, but I thought I needed could again tonight so better it load up, just in case where.

  I connected it to my computer, but it did not show "connected" screen  Instead, he went straight to the last song I listened to.  I thought it was weird so I turned off the player then tried again.  Of course, he went directly to the screen of the song.  I noticed that the battery icon was showing 'filler '.  I thought that if I left it connected to the pc long enough IT would eventually deducted.  Two hours later, I checked the computer and it says that the drive battery was dangerously low.  I disconnected and then reconnected and this time he said 98% charged.  I loaded a bit more just in case so I used the player for about 15 minutes and the player turns off.  Plugged into the pc and now it says battery is extremely low, while the last hours do not charge the battery, but it drains pretty!

  My last attempt was to plug into a wall charger and guess what?  He went directly to the screen of the song once again.  Contrary to connect to the computer, I could actually turn off the player but this way does not charge the battery, or.   It's exactly the same problem as my second player, the Sansa Fuze +.

  I bought the last two players from Sansa, simply because I really liked the first which of course had been abandoned a long time ago.  I don't know if I have bad luck or it is just an issue joint Sansa players but one way or the other I don't buy any Sansa more in the future.  He is a big name that comes with the big disappointment!

  You can also try a reset by pressing and hold the power button for 20-30 seconds. Release it and then turn it on normally and see how it behaves.

  By your description of the message "dangerously low" you get then plug it into your computer, which tells me that you use MTP mode on the player (or default automatic default, MTP). MTP mode can be pretty weird; better to use MSC mode unless you have need to PSG for "protected" content or DRM files such as Rhapsody or audio in your library or Audible books. The small "crirically" message is a bug in Windows 7 (using MTP mode) that Microsoft did not consider important enough to fix.

• Computer does not display the Sansa Clip

  For about a week, my computer no longer displays my Sansa Clip when I plug upward with the USB cable. I can still hear the computer, the connection of detection, but it does not show in Windows Explorer, as before. I checked the setting on the clip and it sees - USB - Auto detection. If I change this meteorological service of the Canada, Windows Explorer displays the clip and folders, but the folders are empty. However, the files are still on the clip and play. Need to know what is happening, so I can add other files to my clip.

  Thanks for the inside. I just do what you say and everything works fine now. Thank you and Merry Christmas.

• Sansa Clip + doesn't turn does not on

  My Sansa Clip + 4 GB consume fresh, then off. but when I connected to the power supply for the load, it dosent turn on. I think there battery problem. So what should I do to load and put to work?

  He has this problem 2 years ago. but after 2 days, I connected to load sansa worked, but now it dosent work.

  Thank you all

  I got the answer

  I hold the power for 30 seconds and it worked.

  

• Headphone Jack does not fit into my new Sansa Clip +.

  Hello

  I just bought a new Sansa Clip + so I could listen to my songs while he's on vacation, but when I put in my profile 3.5 headphone jack into the hole on the side of the mp3 player, it will not thoroughly and grave if I don't hold him properly. That is how a Sansa Clip + is? because I found it very boring.

  I hope someone can answer quickly because I'll be on vacation in a week about. And sorry for my English because it is not my mother tongue.

  When the player is again taking is very tight and it takes a little force to get the plug completely.

• Sansa Clip - computer does not recognize the music file

  I have a Sansa Clip 8 GB. It works OK. It connects to my PC (Windows 7) and fees. But when I open the music from the PC folder there is nothing in it. There is the music of the clip and he is playing. But nothing in the folder on my PC. The clip has the firmware version: v02.01.35A. His car is up to date. Any ideas?

  Try changing the drive USB MSC mode by going to settings > system settings > USB. If you still don't see the files, try MTP mode. Files transferred in a mode are invisible to your PC when it is connected to the other mode (files transferred in both modes are still visible by the player himself, that's why they play even if the PC cannot find them). The third mode, "Automatic Detection", should be avoided because it can change between the MTP and MSC between sessions without warning, according to the whims of Windows.