Sansa Clip + does turn on at all!

Similar Questions

• Sansa clip does not play flac frimware is 1.1.30f1 how to solve this problem

  Hi all

  Sansa clip does not play flac frimware is 1.1.30f1 how to solve this problem

  I need software to convert mp3 to flac, please guide me because I want to test flac on sansa clip

  Thank you

  He plays very well FLAC.  There is probably a problem with your files.  They are not coded correctly, or you use the ID3 tags.  The Clip only supports normal Vobis comment tags to FLAC / Ogg.  Mp3Tag should be able to fix your labels if that's the problem.

  In addition, there is no reason to convert MP3 to FLAC.  It will sound the same as the MP3, but you will have much larger files.  If you want to get the advantage of FLAC (or any lossless format) you will need to rerip your CDs.

• laptop does turn on at all

  my laptop does turn on at all
  and just after I press the Start button I see 3 blinks short on one side of your laptop nearby where passes a power cord

  See the video after the withdrawal and the replacement of the memory modules.

  If the connection is required, use the same username and password as in the forum.

  http://h20574.www2.HP.com/results.htm?SID=5046257&MEID=C1EE528C-DFED-444A-9342-E03BB6A8B2EC

• My Sansa Clip does not work

  I use my Sansa Clip when I work at the YMCA. I used it last night and it worked fine then. This morning when I went to the O, it didn't work at all. Once I got home, I plugged into my computer. It still does not work. Why it does not work and I can fix it?

  How about a magic Sansa?

  Slide the switch to position IT and hold it there for 10-15 seconds.  If you have sensitive headphones, you can hear a "click" soft as the device resets.  It is the function of soft reset .  Your Clip should restart normally after the reset.  Try to turn it on as usual.

  µsansa

• Sansa clip + does not see the audio books I have loaded

  I got my Sansa Clip MP3 player + for two years and it works very well, so far.  I only use it for audio books.  Recently, I reformatted the player and loaded new books in.  When I went to read, the audio books folder was empty.  I have connected the player to the computer again, and the books were in the audio books folder, where I had loaded.

  I've updated the firmware to the V01.02.16A Version, and there was no change.  I tried to reset by pressing the start button. No change.

  Memory has 3750 MB with 3135 free, indicating that there are books in memory, but the player does not see the.  What is going on?

  That's all!  I checked the format of audio files.  It is the AAFC, with suffix .m4a.

  The Sansa manual says:

  "The Sansa® MP3 Player will support MP3, WAV, WMA, secure WMA, FLAC, Ogg Vorbis and audiobook formats.  I guess that AAC is not one of the formats that they support.  So I have to convert .m4a to .mp3.  I guess there are a lot of tools to do it.  Any suggestions about which one is the best?

  Thanks a lot for this revelation.

• Sansa Clip + does not start or is not recognized by my computer.

  I listened for the Sansa Clip + to work for about two hours after charging the battery. It stops all of a sudden. It will not turn on, nor is it recognized by my computer. I tried a soft reset by holding the power button and I still get nothing. I tried to connect to different computers and different USB ports on each computer. I can also load with another cord which is not read.

  Any help would be appreciated, thanks

  Have you tried holding down the power button (some say 30 seconds, but I don't think he'd be as long) and then releasing and clicking it normally? This is what worked for me both times as my Clip + died spontaneously.

• Sansa clip + does not load correctly

  My sansa clip + acted weird lately. When my battery runs out and stops automatically my sansa, I just go free. It takes about an hour to go from 0% to about 65%. but after that, it slows down the charging process a lot. in two hours, it will go up only about 10%. my computer is marking battery bad? also: so that my computer "Refresh" the battery I have to unplug the usb and plug it back in. all tips would be appreciated, thanks

  It's the way they are supposed to work. When the charge level of the battery increases, the load in the drive circuit slows down the amount of fees being accepted since the source until it is just a trickle. In this way it does not generate too much heat build up that is detrimental to both the player and the battery itself.

  And Yes, if you connect in MTP mode you can see the level of charge on your computer. But it will not refresh unless you disconnect and reconnect. Besides, you can see as well information on the player screen if you need to see a real battery level percentage. But it still takes say connection of your computer to see this.

  I think that if you use a charger AC - UCB this info is at your disposal, even while charging. I don't know if it updates in real-time, however.

• Sansa Clip does not pass the stage of audio books

  Dear all,

  We have the problem that our Sansa Clip will not skip chapters of audiobooks. If you hold the buttons, fast towards the front/rewinds, but if you just click on it once, nothing happens. It is only in the audio books and Podcasts, but not in music.

  However, we have already owned a Sansa Clip 8 GB, which worked very well. Then we bought a second one (also 8GB) with the problem described. The strange thing: the same audio books work very well on the other Sansa Clip (same firmware version). Also strange: jump works with music files, so it may not be a hardware failure. However, we discovered this last don't bit recently, we already have it back and got another Sansa Clip 8 GB (third). Yet once again, jump does not work. I am suspecting that something with the files is wrong, but I'm intrigued by the fact that they work very well on our first Clip. They all have the same age, our first clip is just a couple of weeks and they all came from the same supplier (Amazon), so I guess it's the same batch.

  The clues someone?

  Thank you very much
  André

  I think that you have access to the setting if you press the button in the 6 oclock position while playing an audio book. I think that there is a choice of menu for the settings of the audio book or chapter. I don't have the video right in front of me now, so I'm not sure about this.

• Why my sansa clip itself turning on and off

  When I turn my Sansa clip with side switch, it waits 2 seconds then turns back on itself. After 15 seconds, it is empty, but then after about 50 seconds it starts again. The only way I found to save batteries from the apartment is to run to the last song in an album and let run until the end.

  Have you tried a reset of the system?  Hold the switch market upward for 15-30 seconds.

• Sansa Clip does not

  My sansa clip is on but can not receive music or bring up the menu. What's wrong?

  Is this new? You take off the sticker of the shield? Say the screen if there is no menu? We cannot read your mind; you have to tell us more about this if you want any help.

• Sansa Clip Zip turns is not on

  I received this from a friend yesterday and had to format everything on it and move all the music on it, just so that I could add music. For some reason any, everytime I restart it, it goes to refresh your memory and the lower part of the bar goes all pixelated, then after a minute or so, he died before completing. I plugged on my windows computer and it connected but no file appeared. Then miraculously it turned, to the cancellation of the music. The files appeared on mac but now its even not connect at all via the USB port. And I am sure that its fully charged.

  You can also try reformatting under control panel (again), which can set player glitches.

• SANSA CLIP does not show as acknowledged when it is plugged...

  My Sansa won't display as recognized when I plugged it in. When I look in Device Manager, it shows a yellow question mark next to it, only iv tried firmware update but its not working not suggestions? I am running windows XP Professional, version... Thank you... Josh

  Can you connect USB MSC mode?  (On the Clip, under settings (press the small button at home and then click down), go to USB mode and select MSC.)

• My Sansa clip + does illuminate what so ever

  It has been less than a week since I bought the mp3. I got him, he was very well, never fell or hit by the water. But earlier today, when I load it (I accusing me of an AC adapter, I know it's correct load my mp3 with it because the manual says), it suddenly stopped to load and completely off Wen. When I try to turn it on it lights, then connect it to the usb charger which is connected to the computer, it is always lit, nor it has little "connected" icon, the screen was a full white. Nothing happens. So what do I do to get it working again?

  As a general rule, the first thing to try in such cases is to reset the player. Press and hold the power button for 20-30 seconds, then release it. Press again briefly, and I hope that it will work as it should.

• Sansa Clip + doesn't turn does not on

  My Sansa Clip + 4 GB consume fresh, then off. but when I connected to the power supply for the load, it dosent turn on. I think there battery problem. So what should I do to load and put to work?

  He has this problem 2 years ago. but after 2 days, I connected to load sansa worked, but now it dosent work.

  Thank you all

  I got the answer

  I hold the power for 30 seconds and it worked.

  

• New Sansa Clip + turns off after a few minutes of play audiobook...

  Hello

  I was wondering if someone could help me.  Have been enjoying my new Sansa Clip + for the past two weeks.  Just been using the function of radio - finally understood how to load an audio cd on the drive.  The drive is recognized on my computer, and audio tracks are in the player very well.  When I start the audio book, the player will stop after about three minutes of play.  I need to do a soft reset before it turns on again.  This happens whenever I try to read the audio book.  I have not loaded all of the songs on the player at the moment and I was wondering if this problem was something I got wrong, or if I was just a faulty drive.  This is my first mp3 player, so I'm new to this. :-)  The radio and the pre-loaded songs work fine.  I contacted the customer service, but have had no response.  Thought I would try the forum before you give them a call.

  I hope someone can help,

  El

  You must use a ripping software and extract the mp3 or wma files. The Clip + probably does not even support .wav files.