My scanner Acer S2W 5300U does not work on windows 7

Similar Questions

• My scanner on the MF4370dn does not work with Windows 8 or 8.1.

  I have a Canon MF4370dn which the scanner part has not worked since I was a computer with 8 windows and will not work at all since I downloaded windows 8.1 right.

  I rebooted tools scanner, tried the Presto! PageManager supplied with the oomputer. I downloaded the latest drivers for the scanner on the site.

  He has worked with Windows 7 fine, but this computer is no longer functional and I often use my scanner.

  Any ideas?

  Solved my problem by redownloading and installing (x 64) Windows 8 pilots and Toolbox software. Thanks anyway.

• Scanner Canon 3200 F does not work on windows 8

  Hello

  After installing the latest driver for this scanner Windows 8 can't find it
  Impossible to use to scan LUN
  message "Twain"?
  Do you have an idea of the problem for helping me find the solution
  Thank you
  GF

  Hello

  After installing the latest driver for this scanner Windows 8 can't find it
  Impossible to use to scan LUN

  message "Twain"?

  Do you have an idea of the problem for helping me find the solution

  Thank you

  GF

  Please re-post this in terms of the language in the menu drop-down list at the bottom of the page. This forum is for English only.

  

  If you can't find the language you need, additional language support can be found here...
  http://support.Microsoft.com/common/international.aspx

• DVD player does not work with Windows 10 on Acer Aspire 5553 G

  DVD player does not work with Windows 10 on Acer Aspire 5553 G. I waited for a fix of Windows a whole year now and I have tried several fixes that didn't work. Are there new solutions for this problem?

  http://community.Acer.com/T5/Windows-10/5553g-Windows-10/TD-p/375386/page/2

  

• Acer Aspire 5536 Webcam does not work with Windows Live Messenger

  My Acer Aspire 5536 laptop with built in Crystal Eye webcam does not work on Windows Live Messenger.  Open the application of webcam Crystal Eye went very well, taking pictures is fine, until I want to use it in a conversation on Messenger.  Is there something I can do?

  A quick response would be much appreciated.

  Hi Tom Hawx,.

  (1) if it works well before?

  (2) remember to make changes?

  (3) you get an error message?

  You can follow the steps mentioned in the article below to configure settings for audio\video Messenger.

  With the help of your LifeCam with Microsoft Live Messenger

  http://support.Microsoft.com/kb/921332

  (Article applies to deliver the LifeCam, works very well for the issue)

  If the problem persists always, for more expert on this issue, help post your query on Windows Live Forum.

  Windows Live Forum - http://windowslivehelp.com/

• scx4100, SCANNER DOES NOT WORK in WINDOWS 7

  scanner does not work in windows 7, working in collaboration with wndows xp

  http://www.Samsung.com/us/support/owners/product/scx-4100

• lovely better does not work with windows vista home Premium what another program removes LSO and HOW to prevent the trackers?

  Question
  better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
  Details

  In current versions of Flash you can also do this via the control panel.

  • Control Panel > Flash Player, click on remove and erase data

• Jet 7 Tablet 5709: HP Jet 7 touch screen does not work in Windows even if it works in the BIOS menu advanced starup

  Less than two months ago, I upgraded my HP Jet Windows 7 to 10. Over time some questions popped up (random apps that could not be opened, etc.) so I decided to do a full reset, deleting the files from the user. Once the 'install' process is complete he brought me to the initial configuration for Windows 10 screen, asking me my keyboard and language preference. He would not accept any contact entry. I rebooted it and he went to the advanced configuration where I could use the touch screen to do a complete reset. That has not changed anything. I found the info on the HP website and did a reset of the BIOS. That has not changed anything. I got an OTG cable, but was not able to get a keyboard work. I did, however, get a mouse works and has managed to create a new user and login. However, the touchscreen does not work in Windows. I was able to get into the settings and looked at the Device Manager settings. There was only a mouse driver listed under Human Interface. I also noticed a number of question marks in the subtopic of the processor drivers.

  I was able to use the OTG cable to try to re - install Windows 10 from a USB key. When a similar initial settings (language, keyboard) screen broke, I couldn't use the touchscreen. Later, I created a USB with Windows 8.1 thinking he might have a better chance. The same problem. He does not touch inputs. And with a key USB installed via the OTG cable, I can't launch a mouse at the same time.

  It is strange that I have not the problem in the BIOS or advanced startup options. It seems that there is a corruption somewhere, but how do I fix?

  Hello Moronihah,

  You did a clean install (delete all files and programs) the 2nd time you reinstalled Windows 10?

  That's what you need to do first.

  Then, you have to go to the HP website and install the drivers on your USB.

  Above all, you need to include the Goodix Touch Controller Driver and pilot, allowing Malta G-Sensor.

  HP Software and Driver Downloads

  You're using a hub 4 ports with your OTG cable? Which will allow you to use the mouse, the keyboard and the entire USB drive.

  

• Touch screen does not work in Windows XP - Portege 3505

  Hey

  Anyone know why the touch screen on my portege 3505 does not work in windows xp?

  A lot of cheers

  Steve

  and no one knows what you have done or installed on your laptop?

  Sorry about that, but who need to know that? Have you changed something on your laptop >
  Did you install a new OS? Have you used the Toshiba recovery image?

• Qosmio G30 - Media center remote control does not work in windows

  Dear all,

  I have a Qosmio G30-194,
  first I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  I tried a full system recovery DVD restore, but nothing has changed, even, I installed Windows Vista with all its pilots.
  Nothing has changed too, I borrowed a USB IR received for another remote that it worked perfectly with my remote on windows.

  Please advise me what to do, should I send it to the service center, or there is an easier solution.

  Mazen h
  NB:,: my laptop info are:

  PQG32E-01P018AR model number

  Thanks in advance

  Hello

  > first of all, I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  If you had a problem with the VGA chip then the whole motherboard has been replaced.
  Maybe it has something to do with your problem.

  Anyway, as far as I know you don t need any special drivers if you want to use the MCE Remote control. For the use of the remote control with Qosmio player you need to connect a USB infrared.

• Satellite A505-s6970: Toshiba Service Station does not work on Windows 7

  Hey guys I need your help,

  I installed windows 7 ultimate on my toshiba Satellite A505 s6970 and I downloaded all the drivers from http://www.csd.toshiba.com/ and I installed all.

  When I open the Device Manager, 3 devices are not installed (Base-2 system device / / 1-Unknown device).
  Then I installed toshiba service station (Windows Vista / 7 32-64 bit because my windows is 64) it will search for and automatically download all necessary devices, but it does not work on windows 7, it worked perfectly in windows vista.

  Also the eco utility does not work, and the media touch buttons work just fine, but without giving that voice tone.

  Thanks for your help

  Hello

  To be honest I have no experience with this tool.
  I m using Tempro.

  However, I guess that Toshiba service station was not tested and not designed for Win 7 at the moment.
  You may need to wait for the next update that works correctly with Windows 7.

  You must understand that the Windows 7 drivers have been released in Beta version, it would mean that the final version would be released in the near future
  In my opinion, you should take a look from time to time on the Toshiba page we.
  I noticed that each new day pilot is released and released.

• 1670 CDS satellite - modem does not work on Windows 2000

  Hi-

  I removed the Toshiba W98SE and installed Win 2000 (new installation). I managed to put it on the audio driver using downloads on your website (and it works).

  I do a test on the dial installation upward and that you have installed the modem also since your website (Conexant Soft K56 Data, Fax PCI Modem). This is intended for W98SE but microsoft message is

  The port looks ok. Please advise - is it the right driver?

  Thank you.

  A Windows 98 driver does not work on Windows 2000. Therefore, you need a new driver for Windows 2000.

  I have checked the Toshiba site but your model no available Windows 2000 driver exists.
  I think you have to search the site of the factory of the modem. Maybe you can find a driver or another portable model that has the same modem.

  Good luck!

• Bluetooth does not work on Windows in Satellite C660-A047

  Hello everyone,

  I have a problem with my laptop (satellite c660-A047) Bluetooth does not work on windows (7 and 8), but it works very well under Linux (Ubuntu, Fedora, Backtrack).

  I have an outgoing method :) to do run on windows, start Linux Live then set the Bluetooth adapter to the off State, and then reboot (do not stop, restart only), and then start windows this time this Bluetooth adapter works great and updated automatically in the Device Manager.

  To use Bluetooth on windows I have to do the same steps: (.)

  If someone wants to know all the details to help me solve these curious case, I will be grateful.

  Thanks, looking forward to hearing from you soon.

  The laptop supports Wlan Atheros / module combo BT.
  This means that a single module shares WiFi and BT connectivity.

  Using Win 7 you must add the additional drivers called filter for driver Atheros BT package.
  So first the Atheros WLan driver must be installed, secondly Atheros BT filter after battery Toshiba BT.

  To help to win 8, you must install two components of driver manually to enable the Bluetooth feature: System Toshiba + Atheros Bluetooth driver driver filter
  [Turn on the Bluetooth feature after a clean install of Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2C03FI0001R04.htm]

• Satellite A210 (PSAEG) - Microphone does not work on Windows 7 64 bit

  Hello, the microphone does not work on windows 7 64-bit, the driver that I use is 64-bit Windows Vsta. The volume is implemented maximum and so is the amplification but no way to make it work with the software assistant camera Skype or toshiba.
  Can someone help me?

  Thank you

  Hi Largo09,

  Usually, you need to install the webcam driver and sound to get the microphone working. The microphone is a part of webcam

  As you wrote, Satellite A210 is not Windows 7 64 bit supported, so the only option you have the Vista 64 bit drivers

  In my opinion, you should check if the Microphone is turned on in Windows audio settings. There you can also activate the Microphone Amplifier, which can increase the volume of the microphone.

• Qosmio F50-126 - Subwoofer does not work in Windows 7

  My subwoofer does not work in Windows 7.
  I installed the audio driver Dolby Digital... Basically controls the bass.

  That didn't activate it because I don't think the pulse of air, that I used to get under Vista. What driver am I missin?

  I don't have this model laptop but it will be interesting to know if you have that you compared the sound settings in Vista and Win7?
  Can you change anything to make box works properly?

  AFAIK there is no special driver for subwoofer features.