Similar Questions

• Re: Toshiba L305 Satellite 1) screen is messed up and only start in safe mode

  * HELP! *

  Windows starts only in safe mode or safe mode with network. My screen is messed up (black and gray with horizontal lines and the screen looks like it scrolls continuously).

  I connected the laptop to an external monitor and it still does not start normally and I need to recover contacts from my iphone from itunes.

  Is there something I can do? I really don't want to lose all my contacts! I have to remove the hard drive and it burst in another machine and try to start windows normally to have access to my current drive with all the data that is on it, but I don't know if it works or if it's a bad idea.

  What could be causing the screen get all dirtied upwards and at the same time windows does not start normally? I have never had a virus before problems!

  Help! Thanks :)

  Hello

  > Windows will only start in safe mode or safe mode with networking

  It seems that the bootmanger is corrupt or something like this

  > I really don't want to lose all my contacts!

  I know, I Safe mode, you have access to all data on the hard drive. So, you can move all the important data on USB or on the partition (if available) 2 nd on your hard drive and you don't need to remove the hard drive
  Then you can reinstall Windows with a recovery disc or by using the disk copy of Win. This is the best solution in your case, try to fix windows can take a lot of time as a new installation.

• I get the error next message each time that my screensaver trys to activate: screen saver: PhotoScreensaver.scr - bad Image

  Screen saver: PhotoScreensaver.scr - bad Image

  C:\Windows\system32\MSVCR100.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support

  This screensaver previously worked, quit not sure why he stopped.

  Anyone know of a cure for this error message.

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Install the Microsoft Visual C++ Redistributable dll, which is necessary for the projects generated with Visual Studio 2010.

  Download the files below according to your operating system version. I would setup versions because they may be needed for different programs. Check in programs and features, you show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.

  Package redistributable Visual C++ 2005 (X 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en

  Visual C++ 2005 (x 64) redistributable package manager
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)
  http://www.Microsoft.com/download/en/details.aspx?ID=5555

  Package redistributable Microsoft Visual C++ 2010 (x 64)
  http://www.Microsoft.com/download/en/details.aspx?ID=14632

  Hope this information helps.

• My cliq is crazy! screen is messed up

  about 2 days after the update, my screen has been completely ballistic. hard to explain but I guess the screen gets biased and chops it up into pieces and begins to slide around normally, it happens when I slide the keyboard in or out. It also occurs if the phone vibrates. the only thing I can really think about is that when I cleaned the screen (with a dry, soft cloth) I can support on that too hard and hit the functioning internal of the phone broken screen. ive tried to restart, remove the battery, sim card and SD. nothing different. which brings me to my next problem, the first time that I restarted after update, the trunk upwards was messed up. motorola symbol appears as usual and right when the "fuzzy" supposed to show, the phone shuts down and restarts, and this repeated two or three times. What happened a couple of times. PIC should be attached. any ideas, suggestions or solutions?

  Thank you

  
  

• Why my screen is garbled with bad pixels

  The text for Mozilla (no other programs) is wrong to pixels. Some areas where it is supposed to be a part of the text is white, and some areas that are supposed to be white have other pixels of color.

  It remains like that, even when scrolling. But if I mark the text and then clear the option, this area is fixed.

  I can send a screen shot or two, but I don't see how to send attachments.

  Thank you very much. It works fine now.

• How to enter my code to access iTunes? My screen is messed up...

  I can push some of the numbers, but not all.  I need to back up, so I can restore it to a new phone, but I can not enter.

  When was the last time that you saved it?

  There is no way past the code pass without a working screen.

  You would need to go to Apple to have the screen replaced.

  Or otherwise, if you don't mind me renounce all support post warranty in the future for this phone, you can take it to a reputable independent repairer who will be able to disable the access code for you, so you can then back up and restore the backup (assuming that you will be able to select "approve this computer" on your damaged phone screen).

• The screen is messed up!

  My husband has been using my Acer laptop. He's not sure what he did, but now I can't tile tabs and the tiles that show the various programs is superimposed on the main screen. Any suggestions on how to get things back was normal? Thank you

  Hello

  Do a system restore to before the problem happened.

  "How to use System Restore in Windows XP"

  http://pcsupport.about.com/od/fixtheproblem/HT/system-restore-XP.htm

  How to use System Restore in Windows XP

  1. Make your way to Start -> all programs -> Accessories -> System Tools.
  2. Click the System Restore program.
  3. Select Restore my computer to an earlier time , and then click on Next >.
  4. Choose a date on the calendar on the left.
  5. etc.

  See you soon.

• I get a white screen, doing just that bad?

  Hi all

  Im a beginner in coding, and now that I did something wrong... I only get a white screen when viewing my page... insead of my Web page content. It happened after I added a widget

  Can someone help me on this?

  My site is: Untitled Document

  Best regards

  Lisa

  No,

  What you have done, is to change this:

  MENU

  TO:

  MENU

  You have NOT closed the

  If the browser is to calculate where the closure

  and think it's the end of the code - id "cont2" is hidden on the loading of the page (this is your menu) all your code becomes hidden.

  You must add the closing

  After the AND give it another ID that you already use id = "cont2" for your shipping container.

• Windows 7, Photoshop CS6 or messed up bad CC dialog boxes!

  Hi guys,.

  I'm running a PC with Windows 7 and Nvidia Quadro 600 card.

  I tried to solve this one under and turned off for many months without success. Updating the drivers on the GPU, etc. Clean install.

  It seems to only affect photoshop dialog boxes. But on the two CS6 and even now CC.

  I'd settle now for everyone even to see this problem before! (Although I'd like a solution, don't get me wrong)

  Here are a few of the problems. Makes it impossible to read and use. Poor guy who uses it to work, is to have a hard time using photoshop! It is each dialog, which is messed up.

  Uh, help!

  

  

  I really can't believe I'm writing this, but I finally solved this problem!

  I think it could have been something to do with duplicate fonts.

  I had duplicates of Arial and about 9 other fonts. However, for the life of me, I couldn't remove them after going through the evolution of the property of the Windows folder to enable the removal of fonts in double that were used by the system. Could not do it.

  I finally reinstalled WIndows 7 as an upgrade. So basically, I was upgrade to the exact same Windows 7 version, while retaining all my original settings, programs, drives mapped etc etc. Everything.

  And photoshop seems peachy now! I can see what I'm doing!

  But thanks to the Dutch Paul Paul, who got me thinking along the lines of the reactivation of fonts!

• my laptop is hp pavilion dv2000, it freezes all of a sudden then the screen gets messed up, the office became 6 parts and then please help you :(

  my laptop indicates that there is a failure of hardware/software to my camera, but I can't find it, then by the next few days, it suddenly freezes, with like glitter graphics, sometimes green, and then he'll let me choose if I want to run it on windows with the prompt of networking, and normal mode I decided to remove the nvidia driver, because I thought it was the main cause, but the problem continues to persist, please help, I don't know what to do now :((

  Go to the website of the manufacturer of your laptop computer graphics card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  If it is not a driver damaged, it can be a graphic graphics hardware fault of card/Onboard himself.

  If under warranty, contact the manufacturer of the laptop.

  If it is under warranty, contact a local and trusted computer repair shop,

  See you soon.

  Mick Murphy - Microsoft partner

• Keyboard for blackBerry Smartphones / Pearl messed up BAD

  My keyboard / roll began suddenly to do weird things... I click on the bead roller and anything, it goes to my contact list... I try and type a name and I get "lst" or "nl" no matter what keys I hit.

  I tried to erase the BB but I can't... went in the Office Manager, save / restore... no change... went to application loader to try and full wipe / reset... option is not available...

  Help!

  Honestly, these symptoms look like moisture damage to the unit.

  I saw him several times.

  You can try to do a wipe and reinstall of the operating system, but IF it comes to damage by moisture, it will not solve it.

  You will need to use JL_Cmder to wipe the device and then load the operating system on the device. Follow the instructions here:

  http://www.BlackBerryFAQ.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F

  If JL_Cmder does not work, follow this instruction:
  http://www.BlackBerryFAQ.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe

• Get a blue screen of death saying Bad Pool Header

  Here are the minidump files

  https://onedrive.live.com/redir?RESID=DDDC05486921CE5E! 109 & authkey =! AAHESSR0WJFLVgM&ithint=file%2c.zip

  https://onedrive.live.com/redir?RESID=DDDC05486921CE5E! 108 & authkey =! AG2gmHN9-jawefA&ithint=file%2c.zip

  Hello

  Both files attached DMP are the control of bug BAD_POOL_HEADER (19) .

  This indicates that a pool header is corrupt.

  Error checking 19, {20, 88db5400, 88db5418, 8030006}

  1: kd >! pool 88db5400
  GetPointerFromAddress: unable to read from 81e34470
  Cannot read MiSystemVaType memory at 81e0a060

  Can't seem to check the power of the pool.

  1: kd > k
  ChildEBP RetAddr
  a25b87cc 81de7d9e nt! KeBugCheckEx
  a25b8858 828fa26b nt! ExDeferredFreePool + 0xfce
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  a25b8a00 82566dd2 tcpip + 0xd826b
  a25b8a24 00000000 c:\windows\system32\drivers\fwpkclnt! FwpsConstructIpHeaderForTransportPacket0 + 0x18b

  Take a look at the call stack shows tcpip.sys, etc. (network routines). That being said, something 3 rd-party's pool of the conflicts of the corruption/NETBIOS that works with the network originally.

  -Nom_processus: mbamservice.exe

  It is a process of Malwarebytes.

  ---------------------

  Remove and replace AVG and Malwarebytes with integrated temporary Windows Defender from Windows 8 for troubleshooting purposes because they are most likely in conflict and cause of NETBIOS conflicts:

  -AVG removal http://www.Avg.com/us-en/utilities

  Windows Defender (how put on after the withdrawal)- http://www.eightforums.com/tutorials/21962-Windows-Defender-turn-off-Windows-8-a.html

  Kind regards

  Patrick

• Print colors of my screen on a customers bad printer

  I run a business from online wedding invitation design. I first create digital files of invitations in Adobe Illustrator CS5, then then I send the PDF to my clients, and finally customers are responsible for the printing of the invitations themselves. Some people print from a computer at home, some have a local print shop print them (professional GOLD places like Staples and Office Max) and some download the design of an online print service.

  I use CMYK and Adobe Illustrator CS5 to create my file.

  2 times this year I met a problem that I don't know how to fix. The customer said that when they print the PDF at home AND a local printer (staples or otherwise), the colors aren't right. Specifically, my Peach was print Brown for her and my light pink color was Tan felt for her.

  The first file I sent him was a PDF I created from Illustrator. I also imported the .ai file in my Photoshop Elements 5.0 and then saved as a JPG and PSD. These two prints of the same results for her. She printed from home and Staples. All two printed wrong.

  Can someone tell me why this is happening? I did 250 + sales in the past 12 months, and it's only the second time this has happened.

  Help!

  Yes.  You are in a 'open loop' workflow (technically speaking).  I would like to see the color of your application settings in Illustrator (Edit > color settings).  You have created a few nuances in Illustrator.  Select 2 colors that have problems and provide me with the CMYK percentages in the color scheme > CMYK.  For example, the color pink could be something like: 0 %c, 20 %m, 0 %Y, 0% K. In the Illustrator color settings, give us space and work CMYK Destination profile (also RGB color space).  Make sure you have "Compensation of the black ' selected Point.  I recommend the RGB = Adobe RGB color space. = V2 SWOP CMYK color space.  This could be regarded as 'standard' practice and, in most cases, you will not get in trouble press.  In the PDF settings, click on 'Print quality' and in the color setting, select 'leave color unchanged.  Save the configuration as a custom setting that you can use for all your files.  Sending proof online in PDF format, it's not what I was referring to.  You should look into getting a decent Proofer, even if it means just for your peace of mind.  If the file prints out of whack, you have a chance to 'fix' the file before it goes to the customer.  And proof of prnted must always be signed by the customer, which could then submit evidence printed to that print job.  Even online impression sellers have a way to accept the printed evidence.  It simply means waiting for approval.  And, because you're in an open-loop workflow, you must have a way to assure your customers that their work will be printed the way it is supposed to.  Then, you will be paid.  You can take a look at Adobe Print Publishing Guide, a good source of information about the print stream and assigning the establishment of industry standards that will ensure the accuracy of your set of circumstances given.  I was unable to read your screenshot.  I need you to write your settings.

• Whenever I try to evaluate and improve the performance of the computer, I get a type of white blue screen telling me I have bad software or hardware and my computer does climb?

  Whenever I try to evaluate and improve the performance of the computer, I get a type of white blue screen telling me I have bad software or hardware and my computer does climb? He did NOT finish the task is content to any screen blue screen saying it's bad it's bad, your computer is messed up bigtime, so-to-speak

  Hi Cynthia,.

  1 have you ever done any hardware or software changes to the PC?

  2. What is the brand and model of the PC?

  3. What is the full error you get when you try to evaluate the computer?

  Audit of the statues of the device in the Device Manager.
  a. click the Start button, type devmgmt.msc and press ENTER.
  b. check for any exclaimation mark and the status of the devices.

  Follow these methods.

  I suggest you to first run the resolution of performance problems.

  Method 1: Open the resolution of Performance problems
  http://Windows.Microsoft.com/en-in/Windows7/open-the-performance-Troubleshooter

  Method 2: Disconnect non-essential external devices and try to evaluate the computer.

  Method 3:  Also, temporarily disable the antivirus and check the question.  Anti-virus programs are sometimes called causes this problem.

  Turn off the Antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Let us know if it helps. If the problem persists, please answer, we will be happy to help you.

• Alienware 17 - R3, blue screen, bad pool header error

  Hello

  I recently bought Alienware 17 - R3 (Intel 6700HQ, 16 GB RAM, 256 GB SSD, 1 TB of HARD drive Windows 10) when I use my computer it restarts automatically leading to blue screen windows header saying bad pool. Please help me solve this problem.

  Thank you best regards &,.

  Souhail

  29/03/2016 edit: Please NOTE THE VERSION of the DRIVER # s listed below are in relation to my 17 R3 GTX 980 M computer Alienware laptop. If you have a different model, it is very possible that your VERSION of the DRIVER may differ from my model!

  I strongly recommend that you install the latest versions of these two programs in FRONT of YOU INSTALLER of DELL SUPPORTASSIST:

  -Dell Foundation Services version 3.1.3300.0, A00
  -Dell delivery digital version 3.1.1002.0, A00

  Now install the latest version of Dell support help by:

  Dell SupportAssist last updated (3.25.2016) is 1.2.6793.01. You can download it directly from Dell @: Dell Support help . YOU MUST UNINSTALL PREVIOUS VERSIONS BEFORE DOWNLOAD THIS LATEST VERSION!

  Make sure that you have updated (note: your latest version may differ according to the model!):

  -BIOS to version 1.2.8
  -Killer E2400 Ethernet driver (DO NOT DL from Dell. DL directly from Web site of the assassin for latest stability and support to prevent conflict BSOD issues! CAN ONLY INSIST ON IT! Download here > killer homepage (you need to examine your specific product)
  -Intel platform dynamic and thermal setting driver version 8.1.10603.192, A01
  -Driver Intel Management Engine Interface version 11.0.0.1173, A02
  -Intel Chipset Device Driver version 10.1.1.7, A00
  -Intel Rapid Storage Technology driver version 14.6.1.1030, A01
  -Intel HD Graphics Driver version 20.19.15.4390, A07
  -(facultatif si vous avez nVIDIA) Geforce GTX 960 M/M 965 / 970 M / 980 M / 690 M / 780 M Driver version 10.18.13.5940, A03

  Enjoy your stable system! Report it to us, if it's not!

  All,

  I've been following this BSOD issue related to SupportAssist and went up to declare and work with PC-DOCTOR to try to find a solution to this (i.e. gave them crash logs, memory.dmp file, etc.). Long story short, I got a response back from them email 24/03/16, who informed me that a new version of SupportAssist would become available on 03/25/16.

  Guess what? I think THEY FINALLY FIXED! I downloaded SupportAssist version 1.2.6793.01, and ran Express Mode, Mode of Stress and successfully expanded Mode! No BSOD. No crashes. No errors. I ran various scenarios:

  -Ran immediately after DLing without rebooting. Worked successfully without BSOD.
  -A ran after the closure of my lip and let the computer laptop 'sleep' for a few hours. Returned, pulled up SupportAssist and once more ran all tests without problem and tested the other menus, options, etc. within the stability programme. Everything is good.
  -Stop the laptop; left for a few hours. He pulled up, started and re-run again all 3 tests and played around with various options/menu/etc. All successful. No BSOD.

  My test is in only 3 days. I'll give you another update as soon as I went a week with a stable system. However, all this looks like promising review before each of us w / this question could not keep same SupportAssist on our laptop because it would lead to term to BSOD if we ran it or not.

  If it is true fixed - YESSSS! All the hard work, frustration and patience has finally paid off for us.

  (BTW: this can troubleshoot BSOD for several laptops Alienware w / Support help - 15 thru 18 series (i.e. 17 R2 R3, R2 R3 15, 14, 18, R3, etc.))