my screen is out of wack after, I tried to install winow 7

Similar Questions

• How can I stop the on screen keyboard to appear even after I tried to stop it from appearing in the normal way, but still continues to appear?

  To the login page when I first start the computer, I took a glance on the keyboard on the screen and since then I tried to get the keyboard to appear by turning off the coast of the normal way, but he still continues to appear no matter how I try to stop it from appearing.  Can someone help me because I don't want to have to re - install the OS again?  Or is it far from uninstall the keyboard on the screen?

  In the Page of newspaper here an accessibility option. Turn if off from there and see if that helps.

• Out of memory error when trying to install the software for HP6488 all-in-one in Vista

  I try to install the all-in-one printer (wifi) HP6488 and get a message '324 MB of space required. 0 MB of available disk space", even if my hard drive has 82.3 GB of free space. When I continue further, I get a message 'we found an earlier version of the HP software, that should be deleted. I deleted all of the HP software, including the performance of specific HP Utility tool. But I always get this message and I am unable to proceed. My laptop runs on Vista.

  * original title - problem with the installation of all-in-one HP6488 *.

  You can get the drivers and manuals:

  http://welcome.HP.com/country/us/en/support_task.html

  Go to the above site > get the latest drivers.

  Also while you're there > 'See support and troubleshooting information' > keys on the model number of the printer > manual to get and how to install info.

  For any other questions, contact HP:

  http://welcome.HP.com/country/us/en/contact_us.html

  See you soon.

  Mick Murphy - Microsoft partner

• When tried to install a program using the CD, the system restarts with a blue screen

  Original title: Running XP Professional, software installation problems

  I am running XP Prifessional, (on a common (i Mac) with Intel dual owner.)  When I try to install new software (from a CD), when the Installer starts up I get a "blue screen" for a moment, the system is restarted.  Even when I go into the control panel of the installation program does the same thing.  Installation CD runs on the Mac side.

  Hi PHiday,

  1. you see an error on the screen?
  2. what program are you trying to install?

  Step 1: We recommend that you copy the contents of the CD to a folder on the desktop and then try to install the software. To do this, try the following steps:
  a. Insert the CD into the CD/DVD drive.
  b. Click Start, click my computer.
  c. right-click on the CD/DVD drive and click Open.
  d. Select the folder or the installation file and copy.
  e. right click on the desktop and click New-> new folder.
  f. in the new folder, right-click and click on paste.
  g. once the program is saved, open the installation file and continue with the installation and check if the problem persists.

  Step 2: If the problem persists, check the event logs and back view details
  see How to view and manage the event logs in in Windows XP Event Viewer .

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Touch screen not working not not after upgrade from 8.1 to win

  I have a PC HP Envy product number X 2 C2K61UA #ABA now Win 8.1 32 bit running. After the upgrade is installed, the screen no longer meets a contact. On the other hand, the touchpad works.

  Masters,

  Welcome to the HP Forum.

  I just went through this process on my own want of X 2 and the touch screen is OK after the upgrade.

  Something that I've done that maybe makes the difference: I have day all driver sets for Windows 8.1 before the upgrade.  Pilots have been out for awhile; the drivers for the 8.1 are also compatible with Windows 8 update was possible before installing the Windows 8.1 operating system.

  I had also stripped most of my personal computer programs: I refresh the system using a customized several months back Image, which included only a relatively bare installation and installation of Microsoft Office standard packages.  I left installed HP SimplePass (I use a device of fingerprinter USB with this computer) and my photo editing software that has been designed for Windows 7 which was SO painful to install that I decided to take the risk of letting up.   Those who survived.

  The stripped upgrade Firefox and Chrome (no biggie), Flash, Kindle, various programs and the old OneDrive files the installer for Windows 8 and a couple of obsolete Broadcom drivers.

  • If you not already have, update all your drivers from the website of media from your computer.  You can always reinstall the drivers - if they have already been installed, you can select "Yes to all" and reinstall / reload the packages during the installation.  Restart the computer after installation.
  • You must run also immediately the Windows updates to 8.1 after the upgrade - there is not zillions of updates, but there are several critical fixes that you do not want to get on the system.

  Changes

  Content deleted from here about RemovedApps - it was not correct for this context.

  • If you find that the question is one of the 'lost files', structure pilot, lost 'something' - lost-at so you can get in C:\Windows.old offending data / missing.  You have 28 days from the date of the upgrade.  I'm not sure of the type of 'time bomb' built into the data - you might be able to actually prevent lost data by copying to an external drive if you really want to keep.

  I hope this helps.

  Click on the Thumbs-Up Kudos to say thank you for the help.

  While I strive to reflect best practices of HP, I do not work for HP.

• Computer has a blue screen crash about 5 minutes after each start up successful

  Computer has a blue screen crash about 5 minutes after the start of successful with the error msg: Stop 0x0000008E (0xc0000005, 0xb7e4571d, 0xb1440748, 0x00000000) Atapi.sys-address b7e4571d base at b7e3b000 datestamp 48025396. Any help is appreciated.

  Hi jason12685,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?

  Method 1

  Possible causes of this error include the following:

  • Drive hard damage
  • Problems of material General configuration with the BIOS, memory, hard drive, or with other devices
  • Incompatible device driver
  • Incompatible software

  Check out the articles below and try the steps mentioned, check if it helps.

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"

  http://support.Microsoft.com/kb/945658

  Method 2

  I would also say that you update all the drivers for hardware devices on the computer by visiting the manufacturer of the computer or the device manufacturer's Web site.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• Black screen occurs on laptop computer after Microsoft Office Professional Plus uninstall the trial has been interrupted.

  My Compaq Presario F500 uses the Microsoft Vista operating system.  I tried to install the trial version of Microsoft Office Professional Plus 2010.  The installation failed and began to 'undo changes' after that that we discovered the previous versions of the trial had been detected.  During the uninstall or process "cancel changes", I unplugged my laptop.  It was powered by the adapter, no battery.  Now, when I start my computer, it goes to Windows Recovery screen.  Once I selected "Boot mode safe" or any other option, including the BIOS screen, it goes straight to a black screen and stops.  My computer was purchased with Windows Vista preloaded.  Any ideas on what is causing the black screen does not?  My files on this computer has not been saved.  Independent repairers are load and arms and legs.  Y at - it an easy solution to this problem that I was able to help out so that my laptop will boot and go to my Windows screen and normal office?

  Hello

  Method 1:

  I suggest you do a start-up repair and check whether the problem is resolved. Follow the steps mentioned in the article below.

  a. start in the system recovery options. Follow the steps mentioned in the article below.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  b. then do a repair on the system and check if you're able to boot the system normally.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Method 2:

  If this does not help then, I suggest do a system restore in recovery environment and check if you are able to start the system normally.

  I suggest you to return the items mentioned below.

  How can I fix a startup (startup)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• How can I return my screen to its default values after you run the Windows 7 color calibration?

  I decided to run the color calibration tool windows to try to optimize my monitor, but the quality came out worse than before. After trying several times and otherwise, to get a better picture I decided that I would just back to its default value. The problem is that I don't see an option for it. So, how can I reset my screen its initial values of before I tried calibration it?

  Thank you

  Using Windows 7 Pro 64-bit

  Windows (rstrui.exe) system restore would do it without data loss.

• Apple pay will not be set up on my new 6 iPhone.  When I touch the icon 'Add card' the ball turns just until the screen times out.

  Apple pay will not be set up on my new 6 iPhone.  When I touch the icon 'Add card' the ball turns just until the screen times out.

  Hello...

  Force restart your iPhone > press on and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  Then try to add a card again > define and use the Apple pay on your iPhone

  And make sure your bank / card is accepted for use with pay Apple > Apple pay participating banks and store card

• ProBook 450 G2: Screen times out

  My screen goes into sleep mode after about 1 minute, even if it took me 2 hours.

  Any ideas?

  Richard

  Hi Richard,

  Here are a few options to check.

  1 right-click the battery in the taskbar icon, and select Power Options.  Click on change settings for the plan alongside your selected power plan, and in the next window, click on change advanced power settings.  In the advanced settings window, expand display, and then expand "turn off the display of"-make sure that the settings seem correct for both ' hip 'and on battery.  Click on apply then Ok to save the changes.

  2. on the Start Menu, select settings and personalization, and then click lock screen.  Soignee neat at the bottom of this window, select the screen saver settings.  Make sure that the drop the topic screen saver is set to None.  Yet once, click apply and then Ok to save the changes.

  Kind regards

  DP - K

• My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  Hello

  I'm sorry to say this, but it points to a UPS of material about to fail.

  You will need to bring the laptop to get it replaced.

  Slan go foill, Paul

• HP Pavilion ze4900: blue screen of death after trying to install Windows on Pavilion ze4900?

  After the death of my hard drive in my Pavilion ze4900, I replaced it with another hard drive for laptop, I had laying around.

  I also tried to install Windows XP Home from a Windows installation CD, the same OS, the laptop had before the hard drive died.

  Everything is going well until the laptop has been made all the installation files, instead of giving me the opportunity to install Windows or repair Windows, the laptop will eventually show me a blue screen with the message:

  "A problem has been detected and windows has shut down to prevent damage to your computer.

  What can I do to fix this? I installed Windows XP on another computer using the same CD, so the CD disappeared not corrupted and replacing the hard drive is hardly used.

  Any help would be greatly appreciated!

  @zenvo2015,

  Hello and thanks for the display on the HP support forums.  The first thing you want to check is if there are any problems with the hard drive that you put in.  Run BIOS diagnostics for the drive and the equipment to make sure that there is no problem.

  Laptops HP - diagnostic system (F2)

  And.

  HP Notebook PC - test a hard drive from BIOS

  Please let me know how things are going.

  Thanks again for posting and have a great day.

• Random computer screen Black-out / turn off.

  Hello

  first is my laptop: HP Pavilion dv6-6160se Entertainment Notebook

  the problem now

  A few days ago my laptop screen started off sudden shutting down/turn black (no lights at all). This was happening when using the laptop randomly. The screen had no lights, and if I use a flashlight on it there is nothing. like his turned to the wide completelly.

  Before that happens. THS behavior varies. Sometimes, she Shimmers from my office to a black screen then back on and sometimes not. Most of the time screen replaced by a green of radom (for most) and then goes black / shuts down.

  NOTE: The laptop keeps runing, I can hear the videos playing then it is probably not a chip gpu or problem gpu, music and games.

  I searched on the web for all sorts of reasons this could happen and tried a few fixes.

  Here's what I've tried and all or the details I could accumulate in Cup for days:

  1. If the screen flickers, turns off and then turns on I get a message that gpu drivers stopped working and valued (on amd and intel).

  2. If the screen turns off, on the rare occasions if you close the lid of the laptop and leave the laptop to go to sleep, when to wake up to the screen works again (noticeable because of the screen moving)

  3. I tried to install 4 different drivers, all with clear install. (did not work)

  4. I tried to recover the system with the restore point. (did not work)

  5. I tried to turn down the brightness of the screen. (did not work)

  6 tried this trick:

  1. Turn off the laptop
  2. Remove the battery
  3. Hold the power buttong for 30-45 seconds
  4. Plug the charger (do not put the battery in)
  5. Turn on the laptop and see if it works.

  Very sensitive details:

  7. given that on rare patches requires to move the lid I tried to shake the screen a little or by slightly pushing from different directions. Actually, this does the trick and back lights up the screen (I have right now typing this after using this 'trick')

  So, with this as a hint, there are a few things that I have in mind but I don't know and need help because I am not a technician.

  (a) there is a LCD cable and when I hit a small vibration upped it and ends in a black screen.

  (b) I have read that if you use a flashlight and you can't see your desktop he means that it is a bad converter.

  (c) the inverter can cause a cabe lose instead of the LCD?

  It's all the comments that I could give you that I remember now.

  Currecntly the screen seems ok (this is the angle of sure there once I moved it and I would aprecciate quick response until it goes black again so maybe)

  EDIT: Tried to play a game for a few minutes and I got the black screen again. Closed the lid and the laptop goes into mode 'sleep' then opened it and it worked. Just for the records.

  EDIT #2: Just tried to play a game again. got the blackscreen, shaked the screen a little bit and it worked, but for the 1st time that I get the message "the demand has been blocked access to the graphics hardware," it may be it's the GPU after all or drivers maybe?

  EDIT #3: Tried to replay a game and it seems to trigger the problem. (I am currently under the laptop with only drivers intel installed)

  Thanks in advance

  Sincerely,

  NTAS

  PS Please do not hesitate to ask me any questions, if you would like more information, I'm not a laptop expert, but I know more than the average

  Hi @Ntas

  I read in your post and it seems there are two possibilities, and I noticed that you have already tried several things that I would normally say.

  I will, however some of these links post anyway for you to review, it is still possible, there may be something in one of them that have been missed or can inspire an idea of the cause. Since you mentioned that sometimes simply move the screen will cause the problem or do disappear, that seems like a loose connection, or maybe something like a pressure on one part of the screen, causing the problem.  Of course, that last part may simply mean that the display is not to his last breath, but if all goes well.

  First I will give you a link for the service manual to help you control connections. Just be careful to read the sections on precautions, protect you and to prevent further damage. This manual is also useful in that it lists all compatible parts, so if the display is faulty you can use this guide to help control a compatible replacement if you choose to do so. HP Pavilion dv6 Notebook PC - Maintenance and Service of Guide

  Here are a few other sources, which can be useful for you.
  Problems related to laptop (Windows 7 and Windows 8) displays
  Diagnose a display LCD (LCD) for damage

  Also, for you convenience here is the page of the drivers for your laptop.
  HP Pavilion dv6-6160se Entertainment Notebook PC Drivers

  I hope this helps at all.

• I put my screen saver to turn on after 1 minute of inactivity. It does not

  I put my screen saver to turn on after 1 minute of inactivity. He does not. I followed the instructions for the Dell Studio PC monitor owner, without success (i.e. type msconfig in the search field, etc.). Could it have something to do with the type of computer that I use (IT ' has an ASUS K52F series)?

  It would be useful to know what checks you did already [especially because your reference in msconfig means you did not hurt already].

  I assume you have checked the installation was properly completed and everything on the monitor & PC are in agreement.  I suppose also that you have checked the monitor & display settings in the display panel and checked power options.

  Check the entries in the Manager of devices for all the warnings, and then try to update drivers - particularly the card video than the one responsible for many problems of power management driver.

  Run the troubleshooter of power

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  then run both the troubleshooters maintenance & Control Panel Performance, troubleshooting.

  If the settings you put in do not appear in the advanced power management options so watch this one then

  When you configure power options for the active power plan in Windows Vista or in Windows 7, the changes do not appear in the Power Options item in Control Panel

  If this does not help then run the System File Checker to repair corrupted in Win7 files
  http://support.Microsoft.com/kb/929833 there is additional guidance on this subject in sfc.exe/scannow

  Finally, check your hardware compatibility http://www.microsoft.com/windows/compatibility/windows-7/en-gb/Default.aspx

  Good luck

• How can I stop technotronic tv ranging from vga to out of reach after windows has loaded?

  How can I stop technotronic tv ranging from vga to out of reach after windows has loaded?

  VGA Out of range usually means that the display resolution is not properly set for television "limited."  Demarrer start in safe mode, and then set the resolution to a lower setting.