My SE password my Wi - Fi mode to data

Similar Questions

• What to do if you forget the password for the recovery mode?

  What to do if you forget the passwd for the recovery mode?

  What do you mean by "the password for the recovery mode"? Do you mean the password of your Apple ID? If so, reset it to https://iforgot.apple.com.

• Install PT8.53 with Linux problem: unable connect in Bootstrap Mode of Data Mover

  People,

  Hello. I install PeopleTools 8,53 Internet Architecture. Server database is the database Oracle 11 GR 1 material. Operating system is Oracle Linux 5.

  I installed successfully JDK7, WebLogic Tuxedo 11 GR 1 material and PeopleTools 8,53 10.3.6, in Oracle Linux 5.

  I've been setting up PeopleTools 8,53 Instance database. Because the Wizard installation problem, I created PeopleTools 8,53 Database Instance PT853 manually. I have run the following scripts:

  (1) utlspace.sql

  (2) dbowner.sql

  (3) psadmin.sql

  (4) psroles.sql

  (5) connect.sql

  Then, we perform Data Mover script in a Windows XP Client computer to fill the PeopleTools PT853 database machine Linux Sever instance. I installed Oracle Database 11 g 2 client for 32-bit Windows XP 64 - bit Windows virtual machine and run it successfully.

  In Oracle Linux 5 Server Machine Net Manager:

  Service name: PT853

  Connection type: default database

  "TCP/IP Protocol".

  Host: 192.168.196.102

  Port: 1521

  Listener: LISTENER

  Protocol: TCP/IP

  Host: 192.168.196.102

  Port: 1521

  I test the Service PT853 with "SYSADM" username and password "SYSADM". The connection is successful.

  In the Windows XP Client computer, the information in the Net Manager is the same as below:

  NET Service Name: PT853

  Protocol: TCP/IP

  The host of the database Machine name: 192.168.196.102

  Port: 1521

  Name of the Basic Service: PT853

  Connection type: default database

  I test the connection using 'SYSADM' and it is successful as well. This means that Windows XP database Client can connect with the server database Oracle Linux 5 successfully. But in the computer Windows XP Client, Data Mover cannot connect in Bootstrap Mode using "SYSADM". Its details are below:

  Configuration manager:

  Type of database: Oracle

  The database name: PT853

  User ID: SYSADM

  Connect ID: people

  Connect password: people

  Data Mover:

  Type of database: Oracle

  User ID: SYSADM

  Password: SYSADM

  When connect in Bootstrap Mode of Data Mover, I got the same error:

  ORA - 12154:TNS: can not resolve the connect identifier specified. Invalid user ID and password for the access code.

  Based on my understanding, in the Oracle database, the Data Mover Bootstrap mode connection requires a PSDBOWNER table with a 'Database name PT853 and UserID SYSADM' entry.

  The problem is that the PSDBOWNER table doesn't have a line after that I run 5 scripts above. I am looking at runs 5 scripts one by one as below:

  (1) running the utlspace.sql script creates spaces of table 2 (PSTEMP, PSDEFAULT). This script can not create 2 storage spaces. So, I created 2 tablespaces manually.

  (2) running the psdbowner.sql script creates the PSDBOWNER table. This script creates the PSDBOWNER table successfully, but the last line by pressing "connect system/manager", had this error: user not valid Word name and pass. logon denied. I ignore this error and continue the following script.

  (3) running the psroles.sql script created the roles PSUSER and PSADMIN. This script runs successfully without error.

  (4) running the psadmin.sql script creates ownerID SYSADM and ownerID password SYSADM. When this script runs the last line 'connect system/manager', had this error: user not valid Word name and pass. logon denied. I ignore this error and continue the following script.

  (5) running the connect.sql script creates connectID 'people' and connect password "people." This script runs successfully without error.

  My questions are:

  First of all, in the database Oracle Linux 5 server machine, when I created the instance of database PT853 using DBCA, on the management of the password for the user 'system', I unlocked it and change his password for 'system '. It causes the scripts 'psdbowner.sql' and 'psadmin.sql' got the error "username and password"? If so, how to fix?

  Second, after you run 5 scripts above, why there is no line in the table for Data Mover Bootstrap PSDBOWNER to open a session? How to solve this problem?

  Thirdly, can I just insert a line 'PT853 SYSADM' into the table PSDBOWNER for Data Mover Bootstrap to open a session?

  Thanks in advance.

  By default, the password of the population is peop1e.

  Once more, you shouldn't do anything 'manually' on the database, scripts do everything for you. Unless something is wrong.

  > When this script runs the last line 'connect system/manager', had this error: user not valid Word name and pass. logon denied. I ignore this error and continue the following script.

  I really wonder why ignore the error. This meant everything that your system password is not responsible, but something else that you set when creating the database. Never happens to you to check the script before you run it and change it if necessary?

  Nicolas.

• Satellite A660-10 x - need more information about the password in the BIOS mode

  Hello

  When I go to the bios there are Security tab when I have things like user password, password mode password hdd/ssd and supervisor + user password hdd/ssd.

  I have not found no documentation mode "password hdd/ssd" is for and what is the difference between 'User only' and 'user + Master' and how it works.

  Could you please give me some info, how does it work?

  Best regards

  Hello

  This is a password disk HARD useful summary:
  http://APS2.toshiba-tro.de/KB0/TSB6B01MC000CR01.htm

  _HDD password user and HDD Master Password: __________
  There are two levels of password of HDD, HDD user password and the HARD drive password. If two levels of HARD drive password have been registered, you can access the HARD disk by entering one of them. Password of TOSHIBA (TPU) utility supports only the HARD drive password. If you want to register both, open the CONFIGURATION of the BIOS. If the HARD drive password has been saved, the drive HARD master password cannot be saved

  I hope this helps a little

• cannot connect to windows because of password required, cannot load mode safe due to the accident.

  Hello

  I'm using Win XP Professional SP2 and I uninstalled my modem high speed orange and speedtouch thomson 330 USB modem software, then I restarted the pc. To restart, I have to open a session I've ever had to do before. the user Pc button requires a password that I was never assigned. Ive tried Admin, admin, etc, and even white. When I enter a password that I don't have any idea what it is, saying "the system cannot log because the LAN1 domain is not available.

  This pc was never part of a domain or a server. nor that I never had to log on before windows. Please can someone help? I understand that restart in safemode and signing in administrator will help, but when I restart in safe mode the pc turns off windows loading page. Please can someone help? I have a lot of work and no backup of my hard drive. I don't have a windows XP CD when I bought the pc.

  My pc is a dual core athlon 64-bit
  Windows xp Pro sp2
  2 GB of ram

  Thank you, Marcos.

  Marcos82,
  So it appears your system tries to connect to a domain.  You should have an option in the login screen to change the domain that you log in.  You will be able to change it to connect to any PC.
  Have you tried "Last known good configuration" among the startup options?  If this is not the case try first and see if it's back to normal.

  Post back with the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry 10 password remove for development mode

  Is it possible to be in development mode and have not created a password? Z10 is my primary phone, and it annoys me that I have the password on every time I'm in development mode. I'll be in dev without password mode? It would be a little easier my life

  Hello BojanKogoj,

  Thank you for your question. There is unfortunately no way to support to have your device in development mode without having a defined password.

  Let us know if you have any other questions.

• Protection of password after entering sleep mode does not

  I recently added another user to my windows laptop 8 and after mode password protection 'sleep', he stopped. I went in the power options, and this option is grayed out. All solutions?

  If the option is greyed out, click the link above that says that "change settings that are not available.  He could ask administrator permission.

• After the power failure during the restoration of the previous day, cannot enter os or passed the password even in safe mode.

  Have laptop Dell 8100, recently used out of town on a wireless remote, installed updates 47 system.  Upon return home, tried to change cable modem I used before purchasing a desktop computer.  I could not the laptop to work on internet.  So I restored system he choose 2007 too far back, then tried to restore someday, when restoring back to the Sunday I was untangle cords and press the power switch on the surge protector.  Now, I can't even in the system.  Go to the login password that I've ever had, my son has changed in 2002 from Tower to the yankees and protected by to keep his friend out of it, but I've never had to use a password he would always automatically functioning screen icons until yesterday.  The second problem the remote while the screen flashed occasionally and would be less bright black with very low juror I would turn off and cool and could use it later.  It happened when he was 6 months old and they replaced the screen.  In the research I found it eventually the inverter is not the screen and found where to buy however, I can not connect to my system now.  I don't want a new laptop, it has been used very little has everything I need and more photos.  My son who has put a password in 2002 died.  I want to return to my laptop, replace and/or to the inverter.  Need to travel to work.  Unemployed and own building company.  How to remove password?  I've never used a password and don't want everything.  Want to right back to my machine.  When asking my password it says field is no longer round.  Don't know what that means.  I know that he renamed Yankee, I saw that when updating.

  The notion of 'Password' is to prevent any attempt to usurp the security it provides. If there is a quick and easy way to circumvent or to usurp the password protected system, then it would raise the question, what should a password?

  I'm afraid that if you've exhausted all the possibilities and are unable to find/recover your password, you will need to reformat the hard drive and reinstall the operating system.

  The Microsoft policy about lost or forgotten passwords .

• I can't log in with password 'error 1331' safe mode doesn't help a rescue disc work?

  is it possible to burn a spare drive for laptop, I have my usable office which works fine

  See:

  Error 1331 on Windows Xp (logon failure: account currently disabled)
  http://forums.techguy.org/Windows-XP/527466-error-1331-Windows-XP-logon.html

  Are spare XP need ed and why?
  http://www.TomsHardware.com/Forum/53143-45-rescue-disc

• GoogleMaps forgotten password of account & have not enough data for Google password recovery.

  Original title: how to find a password for automatic login

  A PC that I use automatically sign me on my account from Google Maps. I need to connect to another PC, where can I find the password on the old PC that I forgot & have not enough data for Google password recovery? I'm assuming that the PC should hold a place to confirm that I'm talking about the known URL

  Hello

  Since you have forgotten the password of account Google Maps & have not enough data for Google password recovery, you must get in touch with support from Google to get help.

  For more information, see the links in Support of Google:

  Sign or not Google Maps

  Known issues

  Let us know if you need help with Windows related issues. We will be happy to help you.

• AviSport - Contributor Mode - No Data restores

  After logging in to Sites webcenter as fwadmin, aviSport Selected-> Contributor mode - none rendered data but with the exceptions below in the log file.
  However, the selection of Admin mode looks very good.
  
  thoughts?
  
  Application server: Weblogic 10.3.5
  
  ERROR [com.fatwire.logging.cs.request] - < Exception including resources /jsp/cs_deployed/UI/Layout/Header/MenuHtml.jsp >
  javax.servlet.ServletException: java.lang.NoSuchFieldError: deferredExpression
  ........
  .............................
  
  Caused by: java.lang.NoSuchFieldError: deferredExpression
  at org.apache.taglibs.standard.tag.common.core.ForEachSupport.release(ForEachSupport.java:212)
  at jsp_servlet._jsp._cs_deployed._ui._layout._header.__menuhtml._jspService(__menuhtml.java:204)
  at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
  ... more than 154
  
  
  
  RROR [com.fatwire.logging.cs] - are impossible to assess the fatwire/interface/controller/controller element >
  2012-07-24 12:53:42, 089 < Exception including resources /jsp/cs_deployed/UI/Layout/LeftNavigationHtml.jsp > - ERROR [com.fatwire.logging.cs.request]
  javax.servlet.ServletException: java.lang.NoSuchFieldError: deferredExpression
  
  
  Caused by: java.lang.NoSuchFieldError: deferredExpression
  at org.apache.taglibs.standard.tag.common.core.ForEachSupport.release(ForEachSupport.java:212)

  I thought about it here:
  jar conflict causing failure after installing interface contributor?

• Protection Mode change Data Guard.

  Experts,
  
  Ask your entries on the Data Guard protection mode change, below, is our environment:
  
  BECAUSE with two nodes: primary
  Single stand-alone Server DB: Eve
  Apply real-time: enabled
  
  For the primary and Standby databases, it's protection guard data display "Maximum Performance" mode. According to our needs, we would go for "maximum availability". I can go ahead and change, however I have questions in mind before making the change.
  
  1. do I need to change the protection on both primary & standby mode?
  2. do on DB primary change automatically the standby mode too?
  3. If the answer is NO to the 2nd question, I need to change the mode of protection to standby also? In the otherwise, primary and Standby will be run in two different modes.
  
  Please let us know of your entries.
  
  Thank you

  Crazy.

  I'm really happy that it works. Only ORA-16198 has very little information about it.

  And its raining in the North tonight so I have to escape before it turns me on.

  Best regards

  mseberg

  Subsequently

  Is equivalent to checking. Hoping no news is good news.

  I've seen this thing before restarting. Last weekend was indeed an Oracle 10 bark at me during the installation of the entire network has been good. Another error, but I finally tried the same thing and it worked also. No complete sense to me, you would think that the listener would govern. And then it takes the real is what's real.

  MS

  Published by: mseberg on December 14, 2011 18:47

• Subversion password let go when you use data on the same svn forced maker.

  Hello
  
  We are running windows Xp sp3 with svn tortoire. Data Modeler 3.0.0 665
  
  Modeler data allows us to modify our data model.
  
  There is a svn repository for all data and source of our project.
  
  Problem:
  When you run the Modeler data and open a template that is located on the svn, an update on the svn repository repository always ask the password for svn.
  This problem also come if you do a simple deposit refresh the Data Modeler.
  
  It seems this substitution of data Modeler always the directory D:\Documents and Data\Subversion\auth\svn.simple Settings\...\Application file that contains the authentication for svn subversion.
  He forgets the password for svn and put the file read-only.
  
  You know the problem?
  close solution or work exist?
  
  For example, we can make a script which always replace the file changed. I'm trying to read but without success.
  
  Kind regards.

  Hello

  some of the features-svn Data Modeler is inherited from JDeveloper.
  Unfortunately, working with svn external tools (such as the turtle) is a well known issue for JDeveloper, because it encrypts and stores the password in another file and try to protect the file you mentioned.
  See more here: SVN and JDeveloper 11 g credentials

  Concerning
  Ivaylo

• Mode synchronous data display in 2 charts in different screws

  Hi all

  I am a relative beginner to LabVIEW, in what I read some resources, done a few tutorials, and tried to make simple programs to get a feel for the program. My main project is to add extra functionality to a LabVIEW project that is used to stimulate human tissues and save the tensions that result (not for torture ). This point has no other relevance that is not convenient or easy for me to test the changes that I do. This means that I do currently with "proof-of-concept" - type programs and hope that the proven concept will work in the real application.

  Basically, I have to do some graphics to display to a second monitor. I did find something that suggests that the individual graphs can be displayed on another monitor, so I need to create a separate VI with the graphics to display. I already looked at how to display the Panel before a VI on a second monitor, tested and had no problems.

  My problem comes with the passage of the original graphical data on the main VI, on the main monitor to the graphics in the second VI, on the second monitor. It seems I can do this by moving a control to the original graphic reference to the second VI, or passing the table with the data from the original graph as an argument in the second VI. You can see my attempts of these two approaches in the attached files: the passage of the control (RefInput_graph_main.vi, graph_sub.vi) reference and passing the array (ArrayInput_graph_main.vi, ArrayInput_graph_sub.vi). The reason why I use the VI of Signal to simulate, it is that I can not simply do another stimulation experience, so I need to simulate data to see if my approach works.

  The problem I have is that the waveform in the two charts is not the same, and this problem occurs with both approaches. It seems that the waveform in the second graph is slightly offset to the right of the original wave. In other words, there seems to be a delay in time between the two charts. I don't know if it caused delays in the transmission of data (unlikely), or a few kaveat with the Signal VI to simulate.

  My questions are:

  1. What is the cause of the delay? How do I eliminate?

  (Program receives only snapshots of data after each stimulation, so it is not a continuous flow of data. I don't know if the delay will always be present in this case.)

  2. are there other ways to pass data between the graphics? Any other suggestions or guidelines?

  (The program is quite complex, so that it will probably be not possible to encapsulate the original sequence structure graph as in RefInput_graph_main.vi, which makes using a reference control was not feasible.) Yet, I am open to ideas.)

  3. all comments more?

  Thanks for your help! I'd be happy to clarify things, or change this message to make it more clear.

  Nemanja

  If you use a chart (updated for the point-to-point): create a queue and when you write in the main graphic, also write to the queue. Put the items on the second chart and the sons of the reference to the queue in the Subvi.

  If you are using a graph (and showing the entire waveform): as above, but use a notifier. In fact, you could just waiting in line the entire waveform.

  The option using a queue is essentially an architecture of producer/consumer, the second using a notification utility is a "program".

  (Just a couple of ideas... you could also share data using a FGV / Global)

• Apps discoverer mode no data

  Hello
  
  I'm integrating discoverer with EBS, after generating views of the company, and attempts to interrogate any folder, I had no data in some files, for example
  Accounts payable: > bills
  
  looking into the SQL query, discoverer does a view query: APFG_AP_INVOCIES
  When we look in the DDL, it's AP_INVOICES retreving data.
  
  Go to sql and select show * of ap_invoices
  no records returned
  But if the show select * from ap_invoices_all
  It returns the data.
  
  I can't find any difference between ap_invoices and ap_invoices_all the two are synonymous when referring to the same table
  
  Any suggestion?
  
  THX

  Hello

  Yes, well R12 works differently. Here the DPV is used to give safety multi-org. The solution is the same, the responsibility that you use to connect to the discoverer must be set up with the correct profiles for politics of the CAE is correctly initialized.

  Support note 732826.1 has more details and workarounds.

  Rod West