Protection of password after entering sleep mode does not

Similar Questions

• OfficeJet Pro 8620: Sleep mode does not

  "Sleep" mode does not work on my new settlement 8620. I tried to change the duration of sleep from 5 min. to 10 and 15, but he was not asleep yet. I tried to close and restart the unit, but that did not help. 2 times the unit did go to sleep, but then he woke up after a short time.  Any suggestions?

  Hello

  Fitrst ensure that the printer has the latest firmware:

  http://support.HP.com/us-en/document/c04083718

  More don't forget to connect its completely directly to a wall outlet and not by some power strips, surge protectors, etc.

  If the same results persists, try temporary disconnect a cable from the back of the printer in order to isolate any possible cause (e.g. fax, USB cable, etc.), remove one cable at a time and to check for the difference.

  I suggest starting with telephone wires, telephone line condition as example may prevent the printer from sleep remaining.

  Please let me know the results,

  Shlomi

• "sleep" mode does not work in my window 7?

  my "standby" does not work even if I click on sleep, it does not react and the word of sleep is different form the other Word

  Hello

  1. what was the last time computer worked well?

  2. did you of recent changes on the computer?

  3. you receive an error message?

  4. do you use screensavers?

  You can follow the suggestions mentioned below and check with the question.

  Windows 7 is not going to sleep:

  http://support.Microsoft.com/kb/976877

  I hope this helps!

• We put the mode 'sleep', after 3-4mints that we are once again, sleep mode does not

  Windows 7 Home Premium 64 bit,
  When you click on SLEEP MODE, after 5mints we take again the laptop.
  works do not laptop Reboot to start,.
  Thanks for giving me something to Solutions.

  Thank you
  Ruby

  Hi Ruby Singh,

  I suggest you try the steps from the following link:

  Windows 7 is not going to sleep
  http://support.Microsoft.com/kb/976877

  See also: a computer that runs Windows 7 seems to sleep, but then he wakes up immediately
  http://support.Microsoft.com/kb/972664

  Hope it will be useful. Incase if you still have any other queries please respond with more details and we will be happy to help you.

• Lenovo s10 3T sleep mode does not?

  I just got my lenovo ideapad 2 days ago and upgraded to ultimate... my problem is, before even that I've updated and it's windows startup, whenever I put on frame or put into hibernation, it actually STOPS? After putting / thinking it was the sleep mode, I tried to restart, hoping that it will go back to where it was before, then I realized, I have to go on safe mode or start normally coz he says correctly, there is no stop. BUT I have not yet stopped... I put it only on the sleeping mode... Why is it so? anyone got the same prob? or am I pressing the wrong button (the power button) to deliver depending on the sleep mode... It bothers me really she always a little reboot when it is supposed to be asleep! I changed the power setting to "what sleep mode" like an hour and tested in a few minutes by setting the mode 'sleep' and try to put it back on, it goes in the computer does not correctly stop---> safe mode or normally start window thingy... What's not here?

  HELP PLEASE... Thanks a bunch...

  Hello and welcome, you have installed Lenovo property there are a few points to configure...

  here a excerpts of my article...... average in settings

  

  --> Advanced power management

  

  Section options check check Enable Hibernation Auto adjust plans according to the battery power
  Sectionower buttons when I close the lid of my portable computer choose Stand By
  When I press the power button on my computer, choose Shut Down
  When I press the sleep button on my computer (clue: on S - series Fn - F1) choose the hibernation

  cordially KalvinKlein

  ------------------------------------------------------------------------------------------------------

  You want more? For more information to get the most out of your machine S-Class

  Establishment of Lenovo Backup Driver Windows 7 Windows 7 Install

  Clean install of XP Starting XP Guide to WebCam Lenovo easy capture      

• Satellite A200-1HV - sleep mode does not work

  Mobile coverage, close to the entrance in a sleep mode or a closing standby mode will be in condition is not clear: snap buttons it does not return to normal mode, toggle switch does not burn and portable starts is strongly heated.

  To force it to work, it is possible, only if to press power. But this work comes at the end not properly!
  As at the end of work with included food supplies specifications it is not turned off and reset product. Rearrangement Vista did not help.

  Please, say it's possible to do.

  I'm sorry for English.

  Hello

  sounds like a serious problem of material. I recommend that you send your machine to an authorized partner and leave check/repair your machine.

  Maybe some defective power supply on the motherboard.

  To find the authorized service partner nearest to your country please visit:

  http://EU.computers.Toshiba-Europe.com/

  go to support and downloads-> support home page-> of repairs maintenance &-> 'find an authorized service provider.

  Contact them and tell them the problem.

  Welcome them

• "Sleep" mode does not appear

  I installed windows professional 2 days back, but the sleep mode option does not appear in the options... What should I do? Help, please

  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  J W Stuart: http://www.pagestart.com

• Satellite C660 and WXP - "sleep" mode does not work properly

  Hello friends,

  I've implemented WXP on C660, no '?' marks in DM, but when close notebook LCD black screen but it is still
  running. Then I can not put it this way 'sleep'. Only when I press the power button / stop for a long time it turns off.

  Please help me to have the correct sleep mode.

  >.. .but when I close laptop LCD...
  With other words, you use the standard Windows settings for mode stand-by, right?

• "Sleep" mode does not work.

  Original title:

  I am running windows xp home w/svc Pack3

  I have my set screen under pwr options to close after 10 min., but it does not do so for the last day

  Hi Richard E Thomas,.

  Thank you for giving us the opportunity to help you in your Windows application!

  You are in hibernation and from backup with your computer.

  The following article describes on troubleshooting hibernation and standby in Windows XP. This article also explains how to determine if a Windows XP-based computer supports (APM Advanced Power Management), features such as the hibernation or standby. This article is intended for intermediate users to advanced.

  Please visit the following link and check if it helps to solve the problem.

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477

  If the problem persists, or if you need help on Windows let us know.

  We would be happy to help you!

• Sleep mode does not

  My computer will not go into sleep mode affter thedesignated time. I need to go to the start menu and maually click on it. I have tried to re-setting the time and which has not helped. It began started about 1 week ago. I have updated virus definitions and run a full scan with Norton 360, but nothing has changed

  In fact, I had the same problem with my PC at home. The problem is that the 'media sharing' is enabled, and it prevents the computer from going to sleep. It took me over a year to find this.
  In the change plan settings, you must go to - media settings - change when sharing media - "advanced power settings" to say "allow the computer to sleep". This took care of it.

• "Sleep" mode does not work after Windows Update

  After that a windows update 2 weeks ago my "mode" has been disabled. It is visible on the start menu, but is paler than other settings. I tried to restore my computer to before the update, but it says there is no date for the value. I've used the system restore and it worked fine. After the update my display settings have been changed also, but that was easily put back.

  Can anyone help? I saw other people with similar problems, but I find no answers that worked on my computer.

  If it's a Win7 computer, post here for appropriate assistance: http://social.answers.microsoft.com/Forums/en-US/w7performance/threads

  If this is a Vista computer, post here for appropriate assistance: http://social.answers.microsoft.com/Forums/en-US/vistaperformance/threads

  If it's a Windows XP computer, post here for appropriate assistance: http://social.answers.microsoft.com/Forums/en-US/xpperformance/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Sleep mode does not work - error message appears

  Whenever I put the laptop to the stand of it gives the error message and I have to restart, or it creates a txt error. 'hs_err_pid520 '.
  What should I do to fix this?

  Hello

  I never heard of this problem, but it will be interesting to know what error message occurs and what is written there.

• HP LJ MFP M425dw 400 does not wake after entering sleep / Auto mode

  Hello

  After you have installed the latest version of the firmware 20140521 (May 21, 2014), the device is not trampled after entering sleep / Auto Off mode.

  The configuration of the device and save the settings listed below.

  Tell me how to solve this problem?

  

  

  It could be a hardware or a firmware related issue.

  You try to perform a reset of the base unit and also try to send new firmware.

  The device may need to be tested with additional troubleshooting steps, so I would say to make an appeal for support through your regional HP Support channel.

• Sierra crash when after the "sleep mode"

  My MacBook Pro (13-inch, mid 2012) after update of the sierra accident when, after the "sleep mode".

  I try to reset the SMC sama NVRAM but always crash.

  suggest to solve?

  Thank you

  When you say 'crash', what do you mean?

  Probably something that runs in the background. Open the black Apple at the top left. Select system, then users and groups and login items Preferences. All deleted in this window.

  You can add applications and programs back to the points of connection with a window to see what is the origin of the crash.

  You can also start the computer start-up (hold down the SHIFT key when you start) which will make the computer start with no 3rd party apps. If that solves the problems, just disable the third-party applications and add back one by one until the problem occurs again.

• Vista home PR., after that "sleep" mode, the computer wakes up not (dell inspiron 530)

  Dell inspiron 530 vista PR. House, after the "sleep mode" the computer doesn't wake up. The mouse works fine. (the computer is set to wake you up at a mouse click)  When I click the mouse fan goes up like to spend awake mode, but fan and the power light continues to blink.  I press the power button once and stop the computer, then the computer says recovery and gets stuck again. Then I turn it off again and it completely restarts and the power led will stop blinking and I'm back in business. -arg... Help! Thank you.

  Hello

  You did changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Follow the steps mentioned in the links below.

  The problems of wake the computer from sleep mode

  http://support.Microsoft.com/kb/266283

  A Windows Vista-based computer resumes the mode not sleep if you move or click a USB mouse as the computer is switch to sleep mode

  http://support.Microsoft.com/kb/930091

  Method 2:

  Refer to the section "Why doesn't my computer go to standby or hibernate as expected, or why he wake up suddenly?" the link mentioned below.

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions