My Security Center is not running

Similar Questions

• I get a message that my Windows Security Center is not on, but when I go to the center of the Action it won't let me turn it on

  I get a message that my Windows Security Center is not on, but when I go to the center of the Action it won't let me turn it on.  What should I do?

  Hello

  · You have a third-party security software installed on the computer?

  · What is the error message that you receive the error code when you try to turn it on?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed on the computer?

  Follow the methods below:

  Method 1:

  Make sure that the Security Center service is configured properly, and then start the Security Center service. To do this, follow these steps:

  a. click on start, click on run

  (b) in the Open box, type services.msc

  c. on the right side of the window, locate the Security Center service in the list of services.

  d. right click on Security Center, and then select Properties.

  e. in the drop-down list startup type, select Automatic (delayed start).

  f. under service status, click Start.

  g. click on apply, click OK, and then close the Services window.

  Method 2:

  Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Security Center does not open on the XP computer.

  Security Center opens not - Windows XP Pro, IE8, fully patched. Wscui.cpl will not run. I have no errors, either on the screen or in the newspaper. I ran sfc/scannow. I have extracted a new copy of the wscui.cpl. I scanned the registry for Wscui.cpl and only found 1 reference to HKEY_LOCAL_MACHINE\SOFTWARE\microsoft\windows\CurrentVersion\ControlPanel\ExtendedProperties\ {CA 305, 226 - D286 - B848 - 2B2E8E697B74} 2. The key is %SystemRoot%\system32\wscui.cpl REG_DWORD 0xffffffff (4294967295. In the center of safety of SERVICES is running.

  Open the control panel and see if there is oddly named, cmdlets that can be showing with asterisks next to them.
  If they exist, see the messages of cold wind and fast586 in this thread - Windows Security Center won't open

  MowGreen
  Expert in Windows IT Pro - consumer safety

  * - 343-* FDNY
  NEVER FORGOTTEN

• Security Center will not open

  Hello
  I tried to open Security Center, because some of my programs do not work to find that they're not because the Security Center does not work, the message I got was C:/WINDOWS/system32/shell32.dll,CONTROL_RunDLL C:/WINDOW/system32/wscui.cpl someone please help
  Thank you

  Hello

  1. when the question is is produced?

  2. you remember of any change to your computer before the problem?

  I would have you run SFC scan to fix this problem.

  Aziz nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows Security Center will not respond, disabled Malwear cant turn it on?

  as mentioned above the screen of my computer kept going as well until I did a scan now that's fine. but the Security Center does not always react and my computer keeps freezing. I have avg that works very well.

  Hi Dar311,

  1. don't you make changes before the show?

  Step 1: Virus scanner online
  a. visit http://onecare.live.com/site/en-us/center/whatsnew.htm
  b. click "full service scan.
  c. scan the computer and remove the infected files.

  Step 2: Run SFC (System File Checker) scan to find and repair missing or corrupt system files and check the result. To do this, try the following steps:
  a. visit http://support.microsoft.com/kb/929833
  b. run the scan successfully.
  c. restart the computer so that the changes take effect and check the result.

  Step 3: Check if a non-Microsoft program is at the origin of the problem
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. check to see if the problem persists.
  d. If the problem does not persist in the boot, it means that another non-Microsoft program is causing the problem.
  e. to find the program that is causing the problem, try "step 2: enable half the services" to "step 6: resolve the problem.
  f. Once you find the culprit, check if there is any updates to update or fixes to the program. If you find, install them and check the difference or reinstall the latest program.
  g. Article, follow "step 7: reset the computer to start as usual.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My windows Security Center does not open and I get a notice that "no software firewall is detected.

  My Windows Security Center does not open, and I am also unable to turn on my firewall.  I get notification "not detected any firewall software.

  Hello

  It seems that you need help to solve the problem of Windows Security Center. Please respond to the suite, which will help us to help you in the right direction.

  1. do you get an error message when you try to turn on the firewall?

  2. which antivirus app do you use?

  Refer to the following information and check the status of the issue.

  See the section "Nithyananda J replied on November 27, 2009" what about Windows Security Center

  The windows Security Center service cannot be started.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/the-Windows-Security-Center-service-cant-be/d8250e7a-ee3c-4302-8CA6-9e2a10262feb

  I also suggest you to run the Fixit from the following link.

  Diagnose and automatically fix problems of Windows Firewall service.

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  You can also try to solve the problem by running SFC scan

  Make the SFC scan and check the status of the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Security Center does not recognize the Windows Security Essentials

  Windows Security Essentials does not seem to register with Security Center.  Security Center reports that no Virus protection is enabled.

  1. I installed Windows XP 32 - bit WGA, activated the product and updated to SP3.

  2 security Center starts giving Windows security alerts for Virus protection, because none has been installed.

  3. I installed McAffee VirusScan.

  4 security Center stopped giving Windows security alerts for Virus protection.

  5. I uninstalled McAffee VirusScan.

  6 security Center has resumed giving Windows security alerts for protection against the viruses as before.

  7. I installed Windows Windows Security Essentials and rebooted.

  8. I tried to uninstall and reinstall Windows Security Essentials with no joy.

  Windows Security Essentials installation did not prevent Windows security alerts.  No Windows Security Essentials registry entry will appear in HKEY_LOCAL_MACHINE/Software/Microsoft/Security Center and monitoring.  If Microsoft consider essential security to be an antivirus product, then how to Windows Security Essentials register with Security Center?

  I understand that this is an information and alert issue only.  I understand that Windows Security Essentials works actually ok.  I am particularly concerned by the reports.  It conditions my deployment of Windows Home Server.  Deactivation of surveillance or the alert is not a solution, just a poor quality work around.

  In a previous thread, the author of this question even abandoned and has not requested additional assistance.  An explanation was given (relevant for Windows 7), but no solution has been offered.  Windows XP has not been addressed.   http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/the-Security-Center-has-not-recorded-an-anti-virus/15ae2383-7ced-4850-A863-f7eb8cc90ee5

  I had the same problem for a while now (I'm on xp) and have searched the Internet for a solution but found nothing at the moment.

• XP SP3 Security Center will not suddenly Norton Internet Security recognize?

  Windows XP SP3 Security Center won't recognize all of a sudden of Norton Internet Security. It has been fine for years. I don't have a virus.

  How to fix problem?

  Hi Chris,

  Thanks for posting your question in the Microsoft Community forum. I understand that XP SP3 Security Center will not recognize Norton Internet Security. I would like to help solve you the problem.

  This problem may occur if there is an inconsistency in the system files or folders associated with XP Security Center. Follow these methods:

  Method 1.

  Disable the firewall and check if that helps.

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions? : http://support.microsoft.com/kb/283673

  Note: you should not disable Windows Firewall, unless you have another firewall is activated. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  Method 2.

  Rename the storage folder.

  1 - Go to control panel, and then open administrative tools.

  2 - click on Services.

  3-go down to Windows Management Instrumentation and stop this service.

  4. stop the Security Center service.

  5-exit and close all windows.

  6. right click on start and select explore.

  7. go down to C:\windows or Winnt\system32\wbem\repository.

  8 remove only the storage folder

  9-go Back To Services and restart the WMI and the Security Center service.

  10. close all windows and restart the computer.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• I can't turn on my firewall. My Security Center will not display informfation on the firewall

  We had malware on the computer, but deleted. Since this incident, I was unable to turn on the firewall and Security Center does not have information on the firewall. I've deleted and reinstalled security essesntials but it has no effect on the problem

  Hello
   
  Please follow the links below to solve the problem.
   
  Method 1
   
  You cannot enable or disable the Windows Firewall setting on a Windows XP Service Pack 2
   
  http://support.Microsoft.com/kb/914230
   
  Method 2
   
  Diagnose and automatically fix problems of Windows Firewall service
  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us?EntryPoint=lightbox
   
  See also,
   
  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?
   
  http://support.Microsoft.com/kb/283673
   
  How to recover from an infection of computer virus and how to prevent future infections from computer viruses in Windows operating systems
   
  http://support.Microsoft.com/kb/940831
   
  I hope this helps.

• Security Center will not start.

  I don't know how long it has been so, but I noticed yessterday that the Security Center does not illuminate.

  No will the firewall or the Defender.

  I ran Malaware and Spybot, and moy. Nothing showed except for some tracking cookies, but nothing major.

  I've ran out of ideas and really don't want to have to do a complete reset to original.

  Can someone please help with some ideas of what either elsed I can try.

  Thank you in advance.

  Hello
  Follow these instructions to fix the Windows Firewall:
  Download and install Windows Repair:
  http://MajorGeeks.com/tweaking.com_-_Windows_Repair_d7141.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Uncheck all boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click on start. Once it is finished, restart your computer. Let me know if this helps you.
  Brian

• Security Center did not recognize my antivirus but I have installed ESET Smart Security 4

  The reliability and performance report shows Security Center did not recognize my Ant virus, but I have ESET Smart Security 4 installed. Any suggestions for a fix. Thank you

  Hi IndySingh,

  You get the error message?

  This problem is inconsistent WMI (Windows Management Instrumentation) repository. Restart the WMI repository will solve the problem.

  Follow the steps described in the article below, which deals with a similar question

  Impossible to activate the application Windows Defender in Windows Vista

  http://support.Microsoft.com/kb/555962

• Windows Security Center does not recognize the webroot security essentials

  I have webroot essentials of security installed on my windows 7.  The Security Center is not recognize the program. This program has antivirus, antispyware and firewall.  The webroot program works normally. Security Center sees no antivirus, windows firewall is enabled (but in fact webroots Firewall works), says and shows that the antispyware windows Defender (previously, he showed have spy sweeper from webroot and windows defender). My question is how can I get the windows Security Center recognize the webroot program? THX

  Hi, thank you for responding. I could solve my problem simply by uninstalling and reinstalling the webroot program. After you reinstall and reboot, windows security center see and recognize the antivirus, firewall and antispyware components

• HP solutions Center can not run because my series D110 printer AIO installation is not complete

  HP solutions Center can not run because my series D110 printer AIO installation is not finished? Please help me solve this problem! Thank you very much!!!

  Hello, I'm sorry you have a problem with your solution center. You can uninstall and reinstall the drivers and full software features.

  This should solve your problem. Here is a link that can help you to download the drivers. Make sure that it is FULL of FEATURES software.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=4023246#n212

  Choose your operating system, and then click NEXT.

  Let me know if it helps.

• Security Center does not illuminate

  computer Aproblematique a with start-up and tried to fix it. When it restarted Security Center informed me that it has been disabled

  Tom,

  Is there a reason why you have not advised him what operating system of Windows you are running including SP level, etc.?

  http://support.Microsoft.com/kb/2519899>

  UTC/GMT is 15:55 Wednesday, August 15, 2012

• Windows 7 service Security Center does not illuminate without notice was working fine

  tried this forum recommended - lit new automatic operated OK 60 seconds off again and won't run repeated process everything's well 60 seconds later again once I had no update since 11/24/2010 when I try not available very disenchanted to grow with this software service still waiting for microsoft to help with the previous queries-Rawdon

  a. Click Start, click Run, type "services.msc" without the quotes.
  b. when the window appears, scroll down to the bottom and double click on Security Center.
  (c) where it says start, auto value of disabled. Below you will see the word 'Start '. A click on that and then click OK. Restart your computer and your Service Center should be active.

  If the problem persists, perform a SFC scan and check.
  To Perform a Scan SFC -

  a. click Start, click programs, Accessories, right-click on invitesand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow

  b. type the following command and press ENTER:

  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient, because the analysis may take some time

  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue

  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity"

  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833