My Skype stop working when I connect

Similar Questions

• Skype stops working when signing

  So I had to "hard" reboot my computer with the power button. Reboot and now Skype connect. It goes for a few seconds then I get a notification saying that it has stopped working and do not know if it is plugged into is chrome said that he could not verify my preferences (I also have installed IE). This is the error message in the event viewer-
  
  Name of the failing application: Skype.exe, version: 6.18.59.106, time stamp: 0x53d146e8
  Name of the failed module: KERNELBASE.dll, version: 6.2.9200.16864, time stamp: 0x531d2be6
  Exception code: 0xe0fafafa
  Offset: 0x00010f22
  ID of the process failed: 0 x 1408
  Start time of application vulnerabilities: 0x01cfc4a3768d0fb9
  The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
  Path of the failing module: C:\windows\SYSTEM32\KERNELBASE.dll
  Report ID: eca0c9d8-3096-11e4-be8f-2016d82949a1
  Faulting full name of the package:
  ID of the failed package-parent application:
  
  I'm unable to delete the DBtemp file to the location of %temp%\skype because it is unreadable or corrupted and I have no idea how to get rid of him. Although I have also no idea if that is the question. Tried reinstalling, deleting app folder of roaming data and perform a restore health prompt action. None of this has worked so far and it's frustrating.
  
  Even more frustrating v6.1 recital is in 'retirement' EDIT: Also Skype for windows 8 does not work for some reason, but I much prefer the desktop version.

  I recommend the following:

  Runs a chkdksk to fix the hard disk file system corruption:

  http://www.howtogeek.com/HOWTO/Windows-Vista/Guide-to-using-check-disk-in-Windows-Vista/

  Who runs the File Checker system of corruption of the operating system of the report files:

  http://support.Microsoft.com/kb/929833

• DRC stops working when you connect to a Windows XP computer

  Help! I use windows 8 pro for use (especially) Remote Desktop connection and whenever I connect to a Windows XP computer it does it very well, but when I connect it shows the office, then remote desktop connection has stopped working.

  I tested the same Windows XP machine on my brothers (also running Windows 8 Pro) computer I log in I can use the machine very well.
  What is the cause of all this!

  Hi Nicolas,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro&filter=AllTypes&sort=lastpostdesc

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Skype stop working when I call someone

  Hello

  When I try calling someone, Skype doesn't work...

  I ran dxdaig.exe and attached the file.

  There are reports referring to the Catalyst Control Center (CCC.exe) incidents.

  Try to adjust the parameters in the Catalyst Control Center:

  -Set all the options in the menu 'Game' Catalyst Control Center 'Application controlled '.

  -change the smoothing smooth-vision to use application settings.

• Skype "stops working" when I get a call or make a call. (The cat still works).

  Well, the title pretty much says everything. I tried to reinstall it 2 times, I turned off my phone Skype, records deleted from Skype in the folder '%Temp% '. Check my gpu drivers, they must be good. Need help, thank you.

  The webcam is still connected to your computer.

  Video Capture sources:
  WebCam Vista/Live! Cam Chat VF0330 (VFW),0 x 00200000, 0, 0, qcap.dll, 6.06.7601.17514

  If you do not use this webcam, then you must uninstall or try to update the drivers.

• Portege Z830-10F - WLAN stops working when USB3.0 port is in use

  Hello

  On my Portege Z830-10F wireless stops working when I plug in a device on the USB 3 port. The wireless connection back upwards as soon as I remove the device.

  The problem occurs with any device I plug. I tested with disks external usb (usb 2 and usb 3), USB, a receiver wireless mouse and a printer/scanner.

  This problem only occurs when something is connected to the USB 3 port. The USB 2 ports on the rear do not have the problem.

  Port USB 3 itself works very well.

  Running windows 8 pro:
  * Wireless lan adapter: Qualcomm Atheros AR9200WB-1NG (version 10.0.0.75 driver)
  * USB port 3: Renesas USB 3.0 eXtensible Host Controller - 0096 (version 6.2.9200.16420 driver)

  I see that I ve got the latest drivers installed on the wireless LAN card and the usb host controller 3.

  The problem arises as well on windows 7 and windows 8 pro. I used the wizard to upgrade Toshiba upgrade of windows 7 to windows 8.

  This problem is present since I got this laptop. I ve already done a reinstall / recovery back to the original with windows configuration 7 but this doesn´t solve the problem.

  Does anyone else have this problem?

  Is there a way to fix this?

  Thank you!

  Hello

  To be honest, it's the first time I read on this issue.
  I have no idea how a device attached to the USB 3.0 port could affect the Wlan functionality.

  I assume its hardware fault and cela must be verified by a certified maker Toshiba.

• Tecra S5 - fingerprint logon stopped working when I chanaged password

  I have a laptop Toshiba Tecra S5 and I use logon of fingerprints from the beginning.

  It stopped working when I have chanaged my password.
  Fingerprints are associated with the old password.

  I looked everywhere to find where to change it without success.

  Can someone point me in a right direction?

  Thanx

  Hello

  I think you should remove the old prints and need to configure this new.
  As far as I know, you can use the new password to connect.
  Then access the setting of Trusuite software, remove old prints and reconfigure using new digital prints.

  Theoretically, this should work.

• Outlook express has just stopped working error: the connection to the server has failed. Error number: 0x800CCC0E

  Original title: outlook express just stopped working

  The connection to the server has failed. Account: 'sale', server: 'mail.thornroofing.com.au', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 10013, error number: 0x800CCC0E

  the message it gives, have disabled norton e-mail analysis?

  the message it gives, have disabled norton e-mail analysis?

  
   
  Try a test message with Norton shuts down completely. If it works, remove Norton and do a custom Setup, opting out e-mail Scanner when it is offered. Sometimes just turn off is not enough.

• SE error message "Windows Explorer has stopped working" when you click on network and sharing Center

  Original title: Windows Explorer has stopped working when I click on network and sharing and also...

  Hello technical savvy people!

  Windows Explorer stops working when I click on network and sharing, and also when I click on system.

  -Otherwise, I rarely get this little automatic.
  But when I do she translates these windows endangered; and then I can't find my connection to the local network, or my IP address,
  nor know how my system!

  Can you suggest healings?
  Thank you for your attention,
  marlem388

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link below and see if it helps.

  Error: Windows Explorer has stopped working

  Hope this information helps.

• I use hyperlinks of Keynote, but they are not working when I connect to a projector AV. Any ideas?

  I use hyperlinks of Keynote, but they are not working when I connect to a projector AV. Any ideas?

  Hyperlinks don't work in the presentation on the projection screen, not 'View presenter' on Mac to display.

• my iphone 5 c screen stops working when I remove the case

  my iphone 5 c screen stops working when I remove the case

  Delete this case? Please explain what you ask a little more clear.

• MacBook pro stolen the question, 'Find my mac' still works to erase personal information if I put it before changing the icloud/itunes account password?  or is my phone app stop working when I change the password?

  MacBook pro stolen the question, 'Find my mac' app still works to erase personal information if I put it before changing the icloud/itunes account password?  or is my mac app stop working when I change the password?

  Unless you fully active 'find my Mac' BEFORE that your mac has been stolen, it can't do anything for you now. It is not active, and there is no way to make it active after the fact.

• Explorer Windows has stopped working when you click FLVfile

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  Explorer Windows has stopped working when you click FLVfile / video clip downloaded by REALPLAYER

  Hello

  What version of the windows operating system is installed in the computer?

  I suggest you to see link and check. (That applies to windows vista and windows 7)?

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

• My lbp6000 has stopped working when I upgraded to osx 9 mavericks. How can I get it back?

  My lbp6000 has stopped working when I upgraded to osx 9 mavericks.  How can I get it back?

  Hi gkharris!

  I know that this issue is frustrating.  I'll be happy to help you.

  When upgrading to new operating systems, we recommend that you uninstall and reinstall the drivers.  Please uninstall the printer by following the instructions in the article:

  Uninstalling the printer driver (CAPT V3.55)

  After uninstalling the driver, please download the latest driver on the Canon USA site.  Please click the link below:

  http://USA.Canon.com/Cusa/support/consumer

  Once you are on the site, enter your model number.  Your operating system will be detected automatically.  Click on the word 'Pilot', and then select The CAPT Printer Driver Ver.3.65 and save the file. Then, open it from the save location and install the driver package.

  Finally, save the printer in the print queue by following the instructions in the following article:

  Registration of the printer with USB (Mac OS X Lion) ( CAPT LBP Series Driver3.36)

  * Although it shows OS X Lion, the instructions are the same.

  I hope this information is useful for you.  If you need assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

• Windows Movie Maker 6.0 Vista immediately stops working when you try to open.

  Hello!

  I've been all around the internet trying to solve this problem, but nothing has worked so far.  When I try to start Windows Movie Maker 6.0 for Vista, (in general), it stops working at their opening saying the following:

  "Windows Movie Maker has stopped working".

  There has been a few times when it actually opens and I can work on my videos, however, it's very, very, rare and seems to happen randomly.

  I tried to open in safe mode, but it still fails to open.  I also tried to open .avi short and simple with WMM 6.0 files to see if it will be open, but that, generally, does not either.

  Once, I was able to open random and I have disabled all the filters on the Compatibility tab and temporarily activated only video filters that I needed.  That seemed to fix the problem for several days, and I could open Movie Maker 6.0 several times.  Sometimes it would freeze everything and save, or stop working when importing video files, but at least it would be open.  I was able to record some videos.  After a few days, my computer day and WMM 6.0 is more open more.  I don't know if yes or no update is the reason why Movie Maker 6.0 started crashing again, but it was the only thing that has changed on my computer while I could uncheck the Compatibility tab filters and open WMM 6.0. [Could uncheck all filters to be part of the problem?]

  I usually works with .mov files, and I read on how this type of file sometimes causes problems with Windows Movie Maker.  However, the problem normally occurs when I try to open the program (and if WMM opens, I can very well change .mov files).  I do not think that the file type is causing the crash, but I guess that's always a possibility...

  I also read that sometimes Windows Movie Maker 6.0 for vista doesn't work with all computers that have vista installed, and Windows Movie Maker 2.6 must be used to place.  Windows Movie Maker 2.6 is working fine on my computer, but it cannot change the .mov files, or record in HD.  I had horribly degrading the quality of the video with the conversions of files to use WMM 2.6.  Windows Movie Maker 6.0 is much better, on the rare occasions that it works.  Do you think I should use Windows Movie Maker 2.6 now?

  Here are two problem reports that appear more often when you try to open Windows Movie maker 6.0.  The window of support almost always said I need to update my computer again (even if there is no new update), or that it is a problem of security Data Execution Prevention.  Windows Movie Maker cannot be added to the list of exceptions to Data Execution Prevention, or I can check to see if the filters from the Compatibility tab are always disabled in the program, I don't know how to solve this problem...

  -----------------------------------------------------------------

  Signature of the problem
  Problem event name: BEX
  Application name: MOVIEMK.exe
  Application version: 6.0.6001.18341
  Application timestamp: 4ad5c77d
  Fault Module name: StackHash_6f96
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 0378415b
  Exception code: c0000005
  Exception data: 00000008
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 6f96
  More information 2: 39ee662180b2f2ed5cfc67e5914ae855
  Information additional 3:6366
  Additional information 4: 8328a225406b340b1b7b5f591aa5688c

  Additional information about the problem
  Bucket ID: 1197617492

  -----------------------------------------------------------------

  Signature of the problem
  Problem event name: APPCRASH
  Application name: MOVIEMK.exe
  Application version: 6.0.6001.18341
  Application timestamp: 4ad5c77d
  Fault Module name: StackHash_1703
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception code: c0000005
  Exception offset: 032e41a4
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033
  Information additional 1:1703
  More information 2: 2264db07e74365624c50317d7b856ae9
  Information additional 3:1344
  Additional information 4: 875fa2ef9d2bdca96466e8af55d1ae6e

  Additional information about the problem
  Bucket ID: 1909412930

  -----------------------------------------------------------------

  The "BEX" error happens much more frequently than the "APPCRASH" error  In addition, I have Windows Vista home premium installed and a 32-bit operating system.  I don't know how to read the problem reports, or if it's all the information you need.  I'm not very good with computers at all the... Any help and ideas would be greatly appreciated!

  Thank you!

  Very often, but not always, Code exception: c0000005 is a permissions access error, so have you tried right-clicking on the MM shortcut or .exe and selecting the option "Run As Administrator"?  Other times a reinstallation of the program crash can fix.  As you can not do with Movie Maker the next best option is to try the System File Checker.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  Have you tested another user even if you need to create one to do this?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  See how many unsigned drivers, you have running on your computer.  This article will guide you on the instructions, but all you need to do is type sigverif in start run.

  How to identify unsigned with sigverif utility in Windows Vista drivers
  http://www.WinVistaClub.com/F34.html

  Vista Movie Maker DEP Fix
  http://www.YouTube.com/watch?v=tkpURM4FFt0

  In the fix above which is sometimes, but not always with success, it is suggested to leave it on the AVI decompressor.

  There are a few suggestions that Nero is a problem if you run that at all?

  Windows Movie Maker has stopped working
  http://blog.SteveX.NET/2006/11/Windows-Movie-Maker-has-stopped-working/

  If a piece of software can crash Movie Maker may be other software can do, then try Movie Maker in a clean environment, without other software running.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  http://www.Google.com/search?q=Movie+Maker+DEP+Vista&RLS=com.Microsoft:-AU & ie = UTF-8 & oe = UTF-8 & startIndex = & startPage = 1