My sound has static, then completely exploded.

Similar Questions

• Crackle M4800 Audio when the sound is played (if no sound has been played for a while)

  I have a new DELL Precision M4800 running Windows 7.

  There is a distinct noise pop crackle that occurs when the sound is played (if no sound has been played for a while.)

  If the laptop is audio playback currently it looks good, but if the laptop is quiet for a while and then something like an e-mail notification is available, crack/pop noise happens as the driver/speaker is trying to wake up.

  The problem occurs with the laptop connected and detached.

  -Edit

  The solution for me was provided by pknb below.

  Reference Dell Open Audio in the control panel. Go to advanced, energy management. Disable the option to disable audio devices.

  I do not have the Audio from Dell driver installed - and it seems that maybe the default setting is that the speakers put in 'sleep' in the context of a power saving mode. Looking at my description above I even referenced at the time of the issue seemed to be that the speaker was not long in 'waking '. In any case after you change this setting the problem now seems to be resolved.

  Reference Dell Open Audio in the control panel. Go to advanced, energy management. Disable the option to disable audio devices.

• I have an older version and has not been completely installed, but I never installed any just Messenger Skype years ago, said

  says I have an older version and has not been completely installed, but I have never installed a Skype Messenger said to restart, just a long time ago, but I did 4 times and continues to repeat again and again. Looked in control don't add remove any messenger or Skype in there.

  Hello

  What is the full error message?

  I suggest you to consult the following link and uninstall Skype and then reinstall and check.

  How do I completely uninstall and reinstall Skype for Windows desktop?

  https://support.Skype.com/en/FAQ/FA10634/how-can-i-completely-uninstall-and-then-reinstall-Skype-for-Windows-desktop

  Now, install it by following the steps in the article, and the check.

  How to install Skype?

  https://support.Skype.com/en/FAQ/FA79/how-do-i-install-Skype

  Let us know if you have any additional questions.

• My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do?  Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do? Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  When connected to the charger make a forced reboot: hold the home and sleep buttons, wait for the Apple logo, release the buttons. May take a few tries.

• Since I changed my monitor my sound no sound. I did an update, still no sound. The sound appears to play but still no sound. Since then, I downloaded and installed the updates.

  Since I changed my monitor my sound no sound. I did an update, still no sound. The sound appears to play but still no sound. Since then, I downloaded and installed the updates.

  Hello

  Thanks for posting your question on the Microsoft community forums.

  I understand that there is no sound on your computer once you have changed the monitor. I would like to know if it is incorrect.

  There are articles that provide methods to solve this type of problem.

  Method 1:

   

  Check out the link and follow the steps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2:

   

  You can also check out this link and follow the steps in the article.

  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918/en-GB

  Let us know if you have any other questions.

• Iusually access my mail through the mail on my keyboard button. This button has stopped working completely, and I don't know how to access my mail at all. How can I get to my email?

  Iusually access my mail through the mail on my keyboard button.  This button has stopped working completely, and I don't know how to access my mail at all.  How can I get to my email?

  Add the shortcut to the desktop Outlook for all users
  http://www.SevenForums.com/tutorials/86683-Microsoft-Outlook-desktop-shortcut-create.html
   
   
  In case you wanted to tell Outlook Express...
   
  Right click on the desktop | New | Shortcut. Navigate to "c:\program files\outlook express\msimn.exe". Click next | Click Finish.  It will be a new shortcut on the desktop.
   
   
  Once an icon on the desktop, you can drag it to the taskbar for easy access.

• My sound has been disabled, the icon no longer exists on the taskbar. What should I do about it?

  My sound has been disabled, the icon no longer exists on the taskbar. What should I do about it?

  Hello

  · Were there any changes made on the computer before the show?

  You can follow the steps from the link: Volume icon is not displayed in the notification area, and you may receive an error message when you try to add: http://support.microsoft.com/kb/319095

• I have a new router and the computer windows 7 If using WAP wireless encriptación. I also want to use my old laptop which has XP then does not connect.

  I have a new router and the computer windows 7 If using WAP wireless encriptación. I also want to use my old laptop which has XP then does not connect. I was told by the router (Belkin) manufacturer support there is a MS download XP patch so it will connect to my new wireless network. Where can I get it and what it is labeled?

  original title: wap encriptación

  Hello

  Maybe this can help.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=3914

• What type of driver sound has extension wav. Which audio driver should I download Windows 8 and how?

  What type of driver sound has extension wav? Which audio driver should I download Windows 8 and how?

  Sannia Hello,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  1. do you try to play audio files. WAV extension?
  2. If so, what happens when you play the files? They do not play, or you receive an error message or a code?
  3. What is the brand and model of your tab Windows 8?

  Thank you for details on the issue.

  File (WAV) Audio Waveform format is a Microsoft and IBM audio file format standard for storing an audio bitstream on PCs. It is an application of the Resource Interchange File Format (RIFF) binary stream format method for storing data in "chunks", and thus is also close to the 8SVX and used the format AIFF on Amiga and Macintosh computers, respectively. It is the main format used on Windows for audio usually compressed gross systems and not compressed. The usual bitstream encoding is the format for linear pulse code modulation (LPCM).

  Audio driver is common for all types of audio files. However, in order to play an audio file with a specific extension, you may need a special codec that you can install. You can refer to this article:
  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows/codecs-frequently-asked-questions#codecs-frequently-asked-questions=Windows-8

  Additional information:
  Download and install the drivers
  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  I hope this information helps.

  Simply answer the required information and let us know if you need more help.

  Thank you

• is it possible that I can work on a movie published in the latest version of first with a first CC 2015 version that has not been completely updated?

  is it possible that I can work on a movie published in the latest version of first with a first CC 2015 version that has not been completely updated?

  I m edition trailer of friends, but the very first version is not fully updated, so it does not recognize the project... Is it possible to fix this?

  There is no way to go "in time" and do older versions of body include the latest versions of the project file format.

  Sorting is to get your current version.

• Impossible to apply the resource DRS settings on host.the of object has already been completely created this can drastically reduce the effectiveness of the DRS

  Impossible to apply the resource DRS settings on host.the of object has already been completely created this can drastically reduce the effectiveness of the DRS

  host is having above mess on summer please help on this

  I found the correct solution

  ESXi 5.1 U3 is the permanent fix for this issue

  U3 is fix

• Server has not then attempt to restart (restart count = 1)

  Hi all
  
  Today, we have seen our wls server automatically restarted
  no errors detected in the newspapers with the exception of the below
  can you please help here?
  
  < s FINEST > < NodeManager > < waiting for the process to die: 27023 >
  < INFO > < NodeManager > < server has not then attempt to restart (restart count = 1) >
  < INFO > < NodeManager > < start WebLogic server with command line: $DOMAIN_HOME/bin/startWebLogic.sh

  When you're on 32-bit system - Linux can manage files more than 2 GB (the limitation is due to the size of the 32-bit integer, which gives the largest possible file of 2 ^ 31-1 bytes).

  In most of the Linux kernels, however, the changes made in support of large files: http://www.suse.de/~aj/linux_lfs.html and http://people.redhat.com/berrange/notes/largefile.html

  Something to note: Some Linux distributions may include a limit of file size of software as an installation by default, most common
  is the restriction of 1 GB. To check your system runs the command 'ulimit-f '. If printing result is 'unlimited' there is
  No software limit.

  If it is the case that your system does not support large files, you can change the logging in weblogic as the
  the log files are turned when they reach a certain size. (http://download.oracle.com/docs/cd/E21764_01/apirefs.1111/e13952/taskhelp/logging/ConfigureAndViewLogs.html)

• I started to lose the speaker icon in the task bar sometimes, then completely, now I have no audio device listed and no sound on speakers. How can I get that back?

  I use XP Professional

  Hello Yaldingman,

  Thank you for your message.  We will ensure that you have the updated driver for your computer.
  Go to the Web site of the manufacturer of your computer and download/install the latest audio driver for your system.
  Please let us know if this is or is not to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• HDMI sound has stopped working - dv9266ea

  Hey!

  I have a laptop dv9266ea with WinVista Home Premium and a few 1-2 months ago my sound does not work as it should. We used to be able to plug the laptop to our TV using a HDMI cable and change the sound default and everything was good, but now we have not any sound at all more. Photo is excellent as usual.

  Are more people who has the same problem, so it might be because of some update somewhere here? Or anyone knows of another solution?

  Never mind. Swedish support couldn't give me an answer. American support couldn't give me an answer. 2 times I had the mother exchanged at just 1.5 years (the last time they destroyed the volume controls and said that they didn't fix it for me, even if they one wrecked at HP), and my brother had his mother traded 3 times on a similar model.

  HP seems to suck. I'm going to buy a new laptop to mark another in a few weeks and then it goes in the trash. I lost the way a lot of time and money because of all it's flaws and time away for repair.

  Solution: Trash and get another brand.

  Message edited by LordMagnus on 02/06/2009 12:38 AM

• Time Machine has decided to completely replace the four years of TC backups

  I had four full backups Time Machine of my iMac to my Time Capsule. A couple of weeks ago, I replaced my iMac with a new. Transfer backups has been flawless, worked fine and regular backup recovery continued as before. Then yesterday...

  My iMac gave me a message that essentially says that a thorough examination showed my backups were OK, but they all had to be replaced by a completely new iMac backup everything. I said OK. That backup has taken from one day to the next. This morning, I found the new overall backup was available, and I could recover my files, so this seems OK. Now, however, Time Machine says that it's going to save 145 GB (almost all my storage) again. Unless it's just stuck, saying that it is done, but actually does nothing. Everyone knows this? Should I cancel this new full backup or it means that I'll lose the only backup made last night?

  Any suggestions will be appreciated.

  You should NOT have continued using the old backup once you have migrated your files to the new iMac.

  The current situation is that the backup is damaged or there simply is not enough space to do a new backup. Neither TM remove enough files to continue to operate.

  If you want to keep your old backups. Go to airport utility and use the archive function.

  

  You will need to plug a USB stick formatted properly capacity equal to TB. It will then copy the content of the TC on the disc.

  Then, you delete the drive... a quick erase is only a minute or two... and then start a new backup.