My subscription is not reactivate even though I had made the payment

Similar Questions

• What reason is there to find my friends send me the mesasge 'Location not available', even though the iPhone, I'll try to find is always on and always is sharing its location with me?

  What reason is there to find my friends send me the mesasge 'Location not available', even though the iPhone, I'll try to find is always on and always is sharing its location with me?

  Hello

  If there are several device linked to the account, it's probably just that it took to give the positions of the other device or the iPhone is not connected by wifi or cellular connection.

• I get the blue screen in the LR development mode, even though I have updated the driver for the graphics card on this new laptop. It's an AMD Radeon R5 M335 4 GB memory DDR3, core i7 6th gen processor. What should do?

  Hi guys, I get the blue screen in the LR development mode, even though I have updated the driver for the graphics card on this new laptop. It's an AMD Radeon R5 M335 4 GB memory DDR3, core i7 6th gen processor. What should do? Thank you

  This Eizo has a normal resolution of 1920 x 1200 pixels. I expect not to see a lot of benefits of using the GPU. You really see the advantage to screens that are at least 4K (3840 x 2160 pixels) or more. On small screens, you can see some benefits with smoother updates if you ONLY use the base sliders to develop. If you use brushes, turning on the GPU can actually slow you down a bit. In most cases, loading images in develop is also slower when you activated! There are a few illustrative notes to an engineer from Adobe that you can read here: notes for Lightroom CC GPU (2015) in order to better understand what is happening. Currently, in most cases, I recommend leaving off the coast. I think that Adobe is trying to improve and have more cards supported, but it is not yet completely there.

• I get the update failure when I try and import plug-ins for Indesign for new DPS, even though I have updated the Application Manager. What can I try next?

  I get the update failure when I try and import plug-ins for Indesign for new DPS, even though I have updated the Application Manager. What can I try next?

  And moved to the DPS forum.

  The classic DPS plugins are not supported in CC2015. You go back to CC2014 for that. Only the new digital publishing Solution will be supported in CC2015.

• just made the payment, the money in your account and struck neotobrazilos even temper, and I paid for! what it is!

  only, I made the payment a month package by creating a new subscription as a student. Otra data fill out the form on the official website. It notification from the Bank that this amount was charged to the card, but a firm neotobrazilos what I did and stopped the game oego is paid! What should I do? Call the Bank and opposition to the payment?

  Hello

  Please contact support by calling/chat for billing queries and details of order processing:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• HP Officejet Pro L7780: HP Officejet Pro L7780 Solution Center does not work even though I can print

  Last week, Solution Center of my printer HP Officejet Pro L7780 stopped working, even though I can still print directly from applications. But I can't use the scan feature. I uninstalled and reinstalled the driver full several times (after uninstalling using uninstall_L4, cold restarted the printer, remove the DigitalImaging registry key and delete all the files in %Temp%). The re - install seems to be okay except that when I try to open the solution Center, it happens nothing except sound.

  Any ideas how to solve this problem?

  Thank you.

  Hello

  Thank you for using the forum.

  You can find the solution here:

  http://h30434.www3.HP.com/T5/printer-software-and-drivers/HP-Solution-Center-fails-to-launch-cannot-...

  Find the relevant video below that shows you how to "uninstall Windows 10 updates" and also "Hide updated" to prevent Windows to install the update in the future!

  Windows 10 - How to uninstall & hide updates

  https://goo.GL/3tWxyA

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

• I can't get rid of Highlightly even though I disabled in the extensions and uninstalled in the control panel. (windows 7 pro)

  Highlightly does not appear in the control panel more since I uninstalled it. I disabled the extension in the Add-ons. He however keeps popping up. I have windows 7 pro 64-bit.

  Is there an action actually uninstall Highlightly your list of extensions instead of disable?

  One thing I would recommend is that make you a Reset of Firefox. The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  To be sure that he's gone completely, make a check of malware with some malicious programs, analysis of the programs on the Windows computer.
  
  Please scan with all programs, because each program detects a different malicious program.
  
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender: Home Page:
    http://www.Microsoft.com/Windows/products/winfamily/Defender/default.mspx
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• HP Officejet 4620: Printer is in"error" and will not print, even though the computer says that it is "connected".

  My printer recently started telling me it was in a State of 'error' and could not print my documents.  Sometimes I could turn off the printer market and all that was trying to print would then print, if documents or Quicken checks.  Now I can't print from the computer at all, or it will print checks from Quicken even if I turn the printer power off and power on.  The HP Web site indicates that it is connected.  It is the second computer from HP Officejet 4620 of the original that I bought.  The first has a problem that has been covered by the warranty, and this one doesn't seem to be much better.

  Hi @Janilynn,

  Welcome to the HP Forums!

  I read your post and wanted to help.

  I understand that the printer does not print when the computer shows that it is connected.  Please run the print and scan the doctor.

  I would like to know if it solved the problem or gives you an error message.

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• My audio does not work even though device manager says my driver is not working properly

  After I re installed Windows XP after the blue screen problems continued I was not able to get my audio.

  First of all, I tried several different versions including the MB CD driver and those on the site of Asus for my motherboard. I tried later and I tried the oldest. The only way I could install the driver should disable Microsoft high definition UAA, install the driver, and then I managed to install. I don't know if that is related to the problem.
  http://snag.Gy/fZi6Y.jpg In the photo, he says no device audio, even when there is a good.
  http://snag.Gy/4R58T.jpg On the photo, it says that the device works properly. However it only works for a select few programs: League of Legends and my Realtek HD Audio Manager.
  http://snag.Gy/1C8yj.jpg On the Realtek HD Audio Manager, there is no playback or recording device. I don't know why because my driver is correctly installed.
  http://snag.Gy/CzhyY.jpg Inside of my Realtek HD Audio Device in properties I found this. It is said that it is enabled but not installed right which is in contradiction with what he says on the 2nd picture. It is said that by noon, table of mixer and Line-in as well.
  http://snag.Gy/D04a4.jpg It's the only thing I don't understand. I tried to install a driver on it, but it does not. I think that this could be the cause of the problem, but I am open to any response.
  Motherboard: Asus P5QL Pro
  Sound card: integrated on motherboard
  What I tried:
  -J' I re installed and rebooted several times.  I tried at least 3 different versions of the drivers of MB DVD + Asus official website.
  -J' checked bios to make sure that it is enabeled.
  -J' checked Microsoft Update and am up to date on all updates.
  -J' tried to use Microsoft Fix - it and it did not help.
  If there is anything I can do or that you must see tell me and I'll post it.
  Thanks for the help, MDQ

  Hi MDQ.

  It may be a problem with the sound card. Try to use another sound card and check if the problem persists.

• Sound does not work even though it says it is

  My sound does not work at all cant play music or whatever it is even if the said sound of his work, the "speaker" icon icon is green and goes to full volume I also ran a scan troubleshooting and too, that said there is nothing wrong with my speakers or audio, but I can't hear anything?

  Hello

  Go to control panel-> hardware and sound-> sound

  On the reading tab, please enable and set your speakers to laptop as the default device

  If that does not solve the problem, check out these links

  http://support.Microsoft.com/GP/NO_SOUND (automatically diagnose and repair problems with sound and audio on your computer or when your computer does not play a sound)

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  http://Windows.Microsoft.com/en-in/Windows-Vista/tips-for-fixing-common-sound-problems

  hope this helps

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Hello/iTunes/Apple Mobile Device not install even though I am the administrator

  Since end of February I could not reinstall ITunes.  It all started when I tried to put in day, and it wouldn't work.  In the end I uninstalled ITunes and tried to reinstall, but I kept getting this message that the Apple Mobile Device could not be installed (?), and I need to check that I have sufficient privileges to install.

  Since then, I have:

  Ran as administrator

  Made sure that 'everyone', 'my user' and the 'administrator' (pretty much just me) have full access

  Disabled user account control

  Cleaned the registry with CCleaner

  Command prompt to check the C drive?

  Nothing has worked.  I even went in the ITunes folder where my music is, was the administrator, and it still does not.  Recently, I uninstalled Quicktime, Hello and the Apple Mobile Device... everything that Apple.  Still would not work.  I got:

  "'Hello Service' (morning Service) service could not be installed.  Make sure you have sufficient privileges to install system services. ».  If I hit "ignore", then it will just do the same except replace "Hello" with "Apple Mobile Device".

  I am at a loss.

  Well, I have a Hewlett-Packard laptop

  HP Pavilion Notebook PC g6. 64-bit operating system.

  Windows 7 Home Premium

  6.1.7601 SP1 Build 7601

  Processor: AMD A4 - 3305M APU with 2 locations, 2 Lossnay, 1900 Mhz, graphics HD Radeon (TM)

  If you need more information, let me know (and maybe how to get it).

  I'm REALLY at a lost.

  I posted my reply because of what you have posted; It was incomplete and I thought that you might have missed something:

  Recently, I uninstalled Quicktime, Hello and the Apple Mobile Device... everything that Apple.

  There was also:

  Apple Software Update

  Application of Apple Support (iTunes 9 or later)
  On some systems, iTunes can install two versions of the Apple Application Support. What is expected. If both are present, do not forget to uninstall both versions.

  If it still does not, take my advice and contact Apple technical support or ask in their community.

  See you soon.

• Halo: IT says that it is not compatible, even though it was working before

  I deleted my Halo: Combat Evolved pc Windows Game 7 by accident. I tried to re - install, but she telling me it's not compatible. How is this possible if I installed and played on this same laptop before? It begins installing then stops at 17% and said 'Microsoft games Autorun/Setup has stopped working' only option is to close the program. Then I do. Then he said: it CAN not compatible. I got tired of all the compatibility options and still get the same thing. I do not understand how I installed and was able to play it a day but when I try and do again all of a sudden it is not compatible. I didn't even look for the game on the Microsoft Web site, and it says it is compatible with windows 7. Can someone help me please?

  Removing software will lead to complications given that likely registry entries
  Install who want to link to the removal, and Windows is perhaps coming
  with an error message bogus because it's all just confused about what has
  that's happened with the game.
  First of all try to do a system restore to a time before you delete the game.

  Another option, depending on how long it has been, and how much written
  you did on the space, the game was installed to, is to use a data recovery software that United Nations-is your deletions (I'm assuming that your BIN is not large enough to hold the game. If the game is in the SANDBOX, you can
  just restore from there. Done deal).

  If this cannot be done your will have to play in the registry and remove all entries for the game.
  Back up the registry before deleting all entries well. It is not always easy to find the registry entries, but are common places
  HKEY_CURRENT_USER-SOFTWARE and find the name of the game or the Publisher (look in the Wow6432Node folder so)

  or HKEY_LOCAL_MACHINE-SOFTWARE (there is more chance of finding
  Games in the Wow6432Node folder in this part of the registry).

  Also delete any folder in your.
  The user-My Documents or user------AppData Local or Raoming.
  (you can save backup files for the reinstallation).
  Once that the removal of all traces of the original installation, you should be able to reinstall it.

  I did not have Halo and did not follow the many threads related, but a search of this site should find some discussion and perhaps help.

  The right column of this page has a column of related topics, and the link below goes into detail about the general issue of your error - message

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/the-version-of-this-file-is-not-compatible-with/0e7a9ca7-3b7e-E011-9b4b-68b599b31bf5

  You can find something that can help without going through the registry.
  .

• Plugin unsigned, dotEpub, will not show even though it says "precede at your own risk."

  I have the plugin dotEpub installed, and the sheet shows as not signed/not approved. I used it for awhile and I trust in it and it seems to be the 'opportunity' to proceed at my own risk (which for me is not a risk), but the plugin is invisible no matter what. So I feel I am obliged to do not use something that I am very good with the help of. So, how can I "proceed at my risk?

  See also:

  • https://support.Mozilla.org/KB/add-on-signing-in-Firefox
  • https://wiki.Mozilla.org/addons/Extension_Signing
  • https://blog.Mozilla.org/addons/2015/02/10/extension-signing-safer-experience/

• Worm button 31 preferences is not visible, even though I repeated several times. How can I make visible?

  In 31 worm remote content option 'show' has been changed to a button "Preferences". This button does not appear on my Thunderbird. I made sure it is up-to-date. I rebooted several times, and yet I can't get the button to display.
  As a solution, I'll have to watch my mail through the browser - not always convenient.

  Thank you for your help.

  did you reboot in helkp with disabled modules menu. V31s changes can be flipped up an add-on and it hides the button.

• Page does not update even though I pressed the shift I click Refresh or press F5

  In another web browser the SHIFT + F5 reload all the content of a page update. This does not work in Firefox.
  I like Firefox the best browser for me. But I can't continue to use with this problem.
  I'm a software developer. I need a control tools and it was driving me crazy.
  All my friends told me about the same problem in Firefox and have migrated to other browsers where this issue does not work.
  If you want to keep Firefox up, always operate at least with the characteristics of base like that!
  Sorry my English.

  Hello

  Please also try Ctrl + F5 to reload the new page.