My audio does not work even though device manager says my driver is not working properly

Similar Questions

• Device Manager says no driver base system, no driver of coprocesser

  I have a HP Pavilion DV6707 entertainment notebook, AMD Athlonx2 64 processors and using Win Vista. Also, NVidia Geforce Go 7150 M graphics card with video memory shared to 799. My computer man put in a new hard drive for me and installed Win7 home Professor, thought, he'd a beautiful big favor. Now in Device Manager, it now shows the yellow triangle of Base and by the Co processor under that system. I searched HP as Nvidia me returned to the manufacturer to find the specific motherboard and or drivers. HP has no win7 64 bit drivers for this mother on board only the Win Vista drivers.  I downloaded the Vista 34 bit driver to a file, but of course Im afraid to try to install. Can a d/l old Win Vista and install with the key on the bottom of my computer? If I do that I will lose all my stuff I've accumulated so far on my computer? All in all I don't see where the lack of driver for this has affected the use of this computer.

  According to the hardware Id , the device is a Ricoh card reader then try the following:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-55777-1&CC=US&DLC=en&LC=en&os=2093&Product=3648475&sw_lang=

  To the question of the Synaptics touchpad, you can try the generic Synaptics driver and see if it works better:

  http://www.Synaptics.com/en/drivers.php

• Problems with my sound doesn't play not even though the settings say that the audio does not work properly

  recently I went on vacation... sound computer works very well before I left. Came back, and now the sound does not work.  I checked all the settings and it says everything is working. I've done some research and there was only one window to come when I rebooted that says a file with the extension dll is not found.  So I restored by computer back to before I left on vacation, but still no sound.  No pop up with the dll is not found though.  I went in the "maintenance" section and found it seems to be a few questions audio below is the scheme which is the filler. Hope this is enough information for assistance.  said the task of event 20 116.  I have an ACER one with windows. the computer has HDMI dolby and realtek.

  -

  -

   

    20

    0

    4

    116

    0

    0 x 800000000000000

   

    3490

   

   

    Microsoft-Windows-Audio/PlaybackManager

    LorrainesPC

   

   

  -

    3

    48000

    fake

   

   

  Judy Hello,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand you have a problem with the sound does not work properly in the computer even if the settings say that the audio does not work properly.

  Certainly, I understand your concern and will try my best to help you.

  I appreciate all your efforts really to try to solve this problem.

  This issue would have intervened if the sound card has went wrong in the computer or audio drivers have been corrupted.

  I would suggest trying the following methods and check if that helps.

  Method 1:

  I suggest you to refer to the procedure described in the article below and check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: The above article will help you identify and solve its current problems in Windows, including no sound from your speakers or headphones.

  Also try to install the latest drivers from the chipset in the system and check if it helps.

  If the problem persists, follow method 2

  Method 2:

  How to use the tool File Checker system to fix missing or damaged system files, please follow the steps in the link provided below.

  https://support.Microsoft.com/kb/929833?WA=wsignin1.0

  Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article explains how to run the tool (SFC.exe) System File Checkerto scan your system files and to repair the missing system or damaged files from Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Audio does not work after an update in Windows 8

  I use a laptop HP Folio 9470 m... Last week some update was installed to win 8 and after that my audio is not working properly. Every time when I need to play a song or a movie, or watch something on the Internet, I need first logout, then after logging in first, I need to open the drive. Other wise the audio does not work... Whenever I check to test the speakers, it shows its used by another application, but there is no application by using the audio device. I checked all the drivers, and everything is right in there... But I don't understand that either the app using the audio device in the background... I even reconfigured my system, suspecting it was a virus. But after installing the operating system first two days, that it worked fine, and then a few updates got installed, now return to the box starting... I can see the updates which has installed, but cannot identify the one which may cause this disorder...

  One, any help is deeply appreciated.

  Thanks in advance...

  AG.

  07/11/14 - the problem is caused by the updates of security KB2964736 and KB2965788, which has turned off the sound from the speakers and output microphone of my VAIO laptop, as well as all the features in iTunes.

  I was able to determine that, because now, I manually install updates after the last problems caused by automatic updates. Having discovered this problem, I did a system restore to before the updates to get my sound back, then I manually created a restore point individual for each update before installing. It was a frustrating and time-consuming process, but I could locate the defective updates that I've now hidden so that they will not download on my laptop.

  07/12/14 as a result of writing the earlier yesterday, all sounds had again been disabled when I started my laptop this morning. I did another system restore before installing updates security yesterday (KB2965788, KB2939576, KB2964736, KB2957189) AND my sound back. I've now updated iTunes with the latest version in the hope that this stops the residual fault caused by security updates and I will keep you informed.

• Audio does not work with bootcamp drivers on windows 10 6 (tried on macbook pro 13 mid-2012). Is there a solution?

  Audio does not work with bootcamp drivers on windows 10 6 (tried on macbook pro 13 mid-2012). Is there a solution?

  You have all Audio devices in Device Manager? How Windows 10 has been installed on the Mac? The BC Assistant has been used?

• Beats Audio DOES not work after update windows 10.

  Beats Audio does not appear in WIndows after upgrading Windows 10. The icon is missing from the system tray, control panel and in the search bar. Cannot find the drivers in the HP store.

  Guys, please help. The audio is not good without configuration Audio Beat.

  Thank you

  Jain darshan.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• my audio does not work please help

  my audio does not work please help. Thank you!

  Hi no thanks,

  1. What is the brand and model of your system and sound card?

  2. when the problem started?

  3. did you of recent changes to the computer?

  You can try to run the sound troubleshooter and see if it helps.

  No sound in Windows

  For more information, you can also consult the following article:

  Tips for solving common audio problems

  Hope this information is useful.

• Why aac audio does not work in PowerProducer Windows Vista 32-bit?

  My friend has a Blu - Ray burner that is packed with PowerProducer 5. They have installed on their PC 32-bit of Windows Vista. Its HD files AAC audio camera mp4 video. The audio does not work in the environment creation of PP, or burned discs. I downloaded all the codecs. The audio works fine in WMP and QT, as well as in Windows Movie Maker. Installed the same software on my Windows 7 computer and audio works very well.

  I have contacted Cyberlink, makers of PowerProducer, and they said that the limited packaged version of the software does not support the AAC. They suggested that upgrade to the full version for $50. Obviously, I'm not quite confident in this response.
  Someone has an idea of what might be past or have suggestions of what to try to fix the error?

  Hi ClintWatson,

  Because the problem is specific to this particular application, I suggest you to contact CyberLink support for better support.
  http://Forum.CyberLink.com/Forum/forums/show/3.page

• Error: The Service of Audio does not work

  I get a notice that reads, "The Service Audio does not work", but I still get audio. That is what it is?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I receive a notice that reads, "The Service Audio does not work", but I still get audio. That is what it is?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Wdjpgh,

  1. did you of recent changes on the computer?
        
  Method 1:

  First of all, make sure that the Windows audio service is running on the computer.

  a. open administrative tools by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right click on Windows Audio serviceand then click Properties.
  d. under the general tab, next to startup type, make sure that Automatic is selected.
  e. also make sure that the service is started

  Method 2:

  If there is still no sound after you enable the Windows audio service, then check out the link below and run the troubleshooter and check if it works.

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Method 3:

  If the previous step fails, then you will need install the latest audio drivers on the computer by visiting the sound card manufacturer's Web site and check if it works.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Note: visit the manufacturer's Web site to download the latest audio drivers

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Impossible to connect the printer to the laptop with a wi - fi connection and get a message saying "print spooler does not", even though troubleshooting it says that it is fixed.

  Problems to connect a printer to my lap top using a wi - fi connection and get a message saying "print spooler not working do not ', even though troubleshooting it says it is fixed, any ideas please?

  Original title: install a printer

  I see an error message about "spooler" problems

  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, you may have to restart the spooler to print on your computer.

  To restart the spooler, the simplest method is to save your work and restart the computer. Alternatively, you can try the following steps:

  To restart the print spooler service

  1. You must be logged on as administrator to perform these steps.

  2. Click Start, type: services , then press on enter on your keyboard

  3. Double-click Services.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. Right click on the print spooler service, and then click Properties.

  5. On the general tab, next to startup type, make sure that automatic is selected.

  6. If the service is not already running, under Service status, click Start and then click OK.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

• Sometimes the audio does not work and another day, everything is ok. What can this be? IK have an Asus laptop and I work with windows 7. The melody of the beginning when I put on my laptop is ok

  Sometimes the audio does not work and another day, everything is ok. What can this be?  IK have an Asus laptop and I work with windows 7. The melody of the beginning when I put on my laptop is ok

  Hello Ronald.

  A problem are not uncommon. Something for you to try:

  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• my camera does not work. Device Manager reports "found driver software for your device, but has encountered an error trying to install Windows" I have Thinkpad E420 Laptap. Syed

  Built-in camera does not work on my laptop Lenovo Thinkpad E420. Device Manager reports "found driver software for your device, but has encountered an error trying to install Windows" I have windows 8 Windows 7 upgrade.

  Appreciate your help. Thank you.

  Syed

  Hi Syed,

  Thanks for the reply with the status of the issue.

  I suggest you try to install the drivers for Windows 7 in compatibility mode and check if it works for you. I saw this troubleshooting procedure described working for other members of the community.

  Step 1: Download the driver for the Webcam from this link of Lenovo.

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS015018

  Step 2: Installing the driver in compatibility mode.

  Make the programs more compatible with this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Please reply with the status of the issue, so that we can confirm that the issue is resolved.

• Audio does not work in Windows, Safari 5.1.7 - Captivate v8 (HTML5)

  Audio does not work in Windows Safari 5.1.7 for my project CBT created in Captivate v8 and edited in HTML5. Need help urgent to solve the problem.

  You have installed QuickTime?

  End-users using Safari will also need QuickTime.

  Apple ends Safari for Windows support in 2012 with 5.1.7.

• Audio does not play is not on the timeline in CS4

  Hi everyone, Sub: Audio not playing is not in AE CS4.

  I am trying to create a video with audio in AE CS4. It must be synchronized average little by little, to say voices to be mapped with the video/animation sequence.

  But im getting a huge problem here, my video works but my audio does not work I can not hear audio at all... I tried to import the audio into mp3, mp4 and wav format but no solution I am facing the same problem. But outside the CS4 audio exhibit very fine, I even used many device to test audio everywhere as the audio works fine... and my hardware (Sound) system are up-to-date.

  I browsed google and tried all sorts of solution here but no use. I used numpad + 0 for voice, but whenever he starts from the beginning as a ram preview. It is difficult to adjust the voice between the two / sync make exactly. I changed the settings by going into preferences and exit but no use

  I seriously need a solution... or I want to know CS4 is better or not or cannot be used for creating object. I feel better for me change, author it and fast.

  Please guide me on this problem, thanks in advance.

  Concerning

  Sunder

  That AE can do for you, it's literally a RAM Preview. You can just use space because only you will get a preview of the video. A preview rather RAM to hear the audio. In the Preview Panel, there is a checkbox indicating "to present" check that so that when you do a RAM preview it would start the wherever is your current-time indicator. Just so place a second or two before are to be synchronized.

• XJ437PA #ACJ: Pavilion DV6 - Audio does not

  Hello

  The audio has stopped working in my laptop since these days. It started with the audio does not not intermittently, but he has completely stopped working. I shared my PC specs below:

  Product name: HP Pavilion dv6 Notebook PC
  Product number: XJ437PA #ACJ

  Processor name: Intel (r) Core i3 CPU M 370 @ 2.40 GHz (2 400 MHz)

  I went through this forum and tried a few things:

  (1) to reinstall the codec IDT high definition

  (2) using the file available in the Recovery Manager

  (3) using the MicrosoftFixit

  But the problem is not yet solved.

  Can you please provide some suggestions?

  Thank you

  David

  Hi David,

  I would suggest you try a slight variation on the first two methods.
  
  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp47001-47500/sp47393.exe
  
  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.

  Right-click on the Audio display Intel entry and select uninstall - this time check the confirmation box to remove the driver and continue the uninstall.

  Then, right-click on the IDT device and select uninstall - for this entry, also check the box confirmation to remove the driver and uninstalling.

  Once completed, restart the laptop.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation. Once done, restart the laptop.

  Any improvement?

  Best regards

  DP - K