My T7910 came with two bays of processor

Similar Questions

• where is the 'Enter' key on a keyboard HP KU 1060 that came with my new HP processor

  Where is the "Enter" button on my keyboard HpKU 1060 that came with my new HP

  ENTRY and RETURN are the same.

• W7 Pro came with two installs. I want to install 64-bit, but this program does not run. I have processor EM64T and have installed the W7 32 bit, but want to install 64-bit

  I had XP and would like to take my EM64T processor and memory expansion capability. I bought W7 professional online and could not install the 64-bit version. I installed the 32-bit version, but want to install the 64-bit. I checked my ability of 64-bit. The error is that the installation is a 64-bit program. See below

  "The version of this file is not useful with the version of Windows that you are running. Check of your computer's system information to see whether you need a X 86 (32-bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  Hi Larry_437,

  Please take a look at the thread similar here with instructions on the upgrade of Windows 7 32 bit to 64 bit.

  You can also take a look at this article as well:

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  I hope this helps!

• Laboratory VSAN with pizzaboxes with two bays?

  Hello

  I'm slightly older R300 servers Dell that I want to use a laboratory VSAN. Arrange it in two locations of drive and a RAID controller and I want to know if it is possible to use these for such a facility. I plan on keeping a 1 TB SAS drive in a slot and using a smaller SSD in the other, this configuration in a JBOD mode (in other words, doubt the controller supports true JBOD, so guess it'll be 'RAID-0 disk'). As I understand, ESXi must reside somewhere else, then maybe a USB pen drive?

  Is this possible?

  Thank you

  To?

  are there requirements on the size of the hdd/ssd?

  Yes, you need SSD of at least 10% of the size of the HARD disk drives in your disk group. Let's say that your have 1 TB HDD to add in a disk group, to support you need at least 100 GB SSD or more.

  How much space do I need for the root/ESXi?

  8 GB should be enough. If it is USB flash storage, smaller will do. because there will be zero persistent created by default.

• should I have put windows 764-bit on this laptop - hp dv6000 2006 edition, came with xp?

  should I have put windows 764-bit on this laptop - hp dv6000 2006 edition, came with xp? Dual processor 1.7, 2gbs ram

  Hi, Steve.

  My suggestion, because you do not know your exact model laptop, is to run the tool to scan the Crucial memory and it should tell you how your PC can take memory and how fast. I'm assuming that PC2-5300, based on your processor. PC2-6400 also works if it's cheaper to buy.  It will just downclock at low speed 667 MHz.

  http://www.crucial.com/systemscanner/index.aspx

  Bravo - You just click on the White Star under my name.

  Thank you

  Paul

• Clips on a shoot with two cameras

  I'm was scheduled to begin shooting a film in a few days, which will involve my F55 and an F5 as second camera. For installation, there will be a PMW-200 as the third camera. Just called me to say the naming convention clip that they wish to use for both cameras, and I just got the eggy conversation where I explain that this is not possible right now. The firmware was updated. To come. Blah blah.

  The cameras will be time synchronized jam.

  I wonder if someone has suggestions for how unambiguous and easily differentiate between the two cameras. The ideal would be to change the clip naming, perhaps in the content browser, but I don't see a way to do this.

  Thanks for this Leon. Clip browser it and let the wrangler data to worry about this. We are actually recording to SxS rather raw, so I hope that with my setup enough vanilla and a very little bit of tweaking things must be upward. I intend to shoot mechiers at the head of each location.

  200 gets specific coverage for a scene so I'm not too worried about the match up there; This choice of camera was production and dictated by the budget.

  Speaking with the customer we discussed lockits, but decided to digislate and frequentish jams. Years ago, I came across a problem with a specific batch of Digibetas that has blurred the timecode so continually fed an external signal. It was salvagable to the end, but headache than the left lingers as well with the other weaknesses that I'm getting used to this camera and after having heard about free delivery issues, others have mentioned I thought it is better to let the lockits this time!

  I am in England so shoot 25 p. So far, I used the camera with the crossing record, in part because of talk of free running jumps (possibly a message by you). What was your rate when you have had free delivery issues and you have noticed with firmware 1.13?

• Wreath with two C40 x 4 cameras

  Hi all

  I wonder if I can connect in series with two 4 x cameras(CTS-PHD-1080P4XS) for C40, TC5.x.

  Is it possible to not do that by buying cable (CAB-VCDC - 6.5 M =) Garland?

  I checked "precisionhd_1080p - 720p_camera_user_guide.pdf", but there was no description on 4 x cameras for C40.

  (I found some descriptions on PrecisionHDMC 1080p4x here, but they must be 4 x cameras only for C20)

  I guess it's possible because 1080 p 12 x cameras that can in Garland, have same physical interface devices to 4 x 1080 p for C40.

  Best regards

  Kotaro Hashimoto

  Hello

  I just want to wear to your knowledge this old 4 X cmaera has the same port as 12 X camera; However the use of software RJ45 is block 4 x camera so all in Garland 4 x camera will be last camera because only the RJ11 port will work.

  Kind regards

  Vivek

• Windows 8 shows connect a camera, issues with Intel (r) Imaging Processor 2300

  How am I supposed to connect a camera in Windows 8 tab? I'm having a problem with Intel (r) Imaging Processor 2300.I reinstall this driver but it does not, yet, they say "connect a camera." What am I supposed to do?

  Hello

  Thanks for the update.

  See the link to download and install the latest driver pack for Windows 8.1:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4157&LC=en&cc=us&DLC=en&sw_lang=&product=5327932#N189

  For reference:

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c03430151

  Follow the suggestion of dirkprinsloo , posted on 5 July 2013:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/HP-envy-X2-camera-not-working-after-update-to-Windows-8-1/TD-p/2748567

  Follow the suggestions of clever_trevor , posted on November 2, 2013:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/envy-X2-do-not-install-Windows-8-1-from-the-Windows-store/TD-p/3053613

  Please let us know the results.

• In a with two cameras a multicamera edit does not appear in the multicam monitor?

  In a multicamera CS 6 with two cameras one Assembly does not appear in the multicam monitor or rather remains black while it is present in the sequence? Is this due to lack of memory of the CPU? I have a Toshiba Tecra i5

  Thanks if anyone knows why?

  [email removed by Moderator]

  I use Adobe CS6 first

• Only one CPU is getting detected on HP Prolian DL580 with two processors

  Hello

  I have a HP Proliant DL580 server with two physical processors.

  Connected to the ILO and I see two processors detected. Please see screen Capture 1

  Installed ESXi 5.5 and allowed Enterprose plus on my server. But I only see a single CPU detcted. Please see screen shot 2

  Is it possible that I can get the two processors detected in ESXi?

  -Thank you

  Suresh

  Your Dell r.620 has 2 processors as well.

  2 processors to 6 cores per processor, up to 12 physical cores. With Hyperthreading, it comes to 24 logical cores

• Yesterday, I bought photoshop elements 12, it came with disks for Mac and Windows, since I own a Mac and a Windows machine I would like to know if I can legally install on two machines?

  Yesterday, I bought photoshop elements 12, it came with disks for Mac and Windows, since I own a Mac and a Windows machine I would like to know if I can legally install on two machines?

  Yes, you can install it on two computers, and they can be a mac and a windows computer.

• I have a video with two cameras, in two pieces. Sometimes only a single camera is running (because t

  I have a video with two cameras, in two pieces. Sometimes only one camera is running (because they both turn off to some lengths of clip). I'm cutting them using the multicamera window, but I get no audio track 2. How can I get audio track 2. (My tinkering is to cut the original sound track 2 and move it to channel 1).

  «To record the audio from the camera selected for the audio track, select Audio video follows in the multiple camera monitor Panel menu.» Deselect this option to record audio from the audio track selected in the source sequence. »

  A quote from the CS5.5 Pr help page "editing multi-camera sequences.

• Y at - it how to work with two or three usb or 1394 camera with timing?

  I would like to work with three camera with synchronism 1394b. Y at - it an example? Is this possible?

  You will need to give more details. Do you mean that you want to order on Photo 3 simultaneously? Yes you can. What is your application?

• I have lost my Windows XP Professionsla installation disc that came with computer and I see the message asking me to insert disk 3 to reinstall the files. What should I do?

  I lost the Windows Professional disc that came with the computer. I get a pop up requires me to insert the disc 3 of which I don't have the installation disc. Even if I try to do a system restore I need the disk. I can't lose information that is on the computer and do not have an external drive. What should I do?

  There is no disc 3 of Windows XP Professional.  Windows XP (other Media Center if I remember well) was a CD.

  Please copy the message down verbatim - including the title bar - and who post here.

  You can move this pop-up window on the side and also do all the following - in the order given anything of it periodically, you're already doing...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• The GT630 that came with my HP h8 - 1360t output VGA for my HP w2007 monitor?

  I did research on this issue since about an hour and have not found an answer 'solid '.  There is no VGA/DB15 port on my video card and NVIDIA site presents DB15 ports when their 630 s.

  So I ask

  1. Why are there no DB15 port on my card?
  2. The GT630 that came with my HP h8 - 1360t output VGA for my HP w2007 monitor?
  3. Maybe this'll work via the HDMI port?
  4. I get full/native resolution?
  5. I have the NVIDIA GT 630 or 630 GT OEM?

  Thank you in advance for you help.

  With the help of a PC HP HPE h8 - 1360t, monitor HP w2007, Win 7 and I am very grateful!

  Thank you for the updated information.  Unfortunately, I can't say that the OEM version will allow the adapter VGA to add or not.  I have found no information about this issue and I don't have access to a review and provide a precise answer.  If someone has done this, feel free to chime.

  About the add-in VGA, remember that the back plate will have a slot for him as well. Personally, I do not recommend physically modding any component due to the concern about security.  You might want to consider the limited warranty.

  The big problem, as you will encounter, but most computers use DVI - D.  VGA is purely analog and DVI - D is only digital.  Most PCs now use DVI - D, which will not work with a simple DVI - VGA adapter.  The converters that would a DVI - D to work with VGA are generally expensive (even more than a DVI KVM switch).  There are DVI - D to VGA adapters that work, but they are rare and usually not specified.   It'll be cheaper to start with a DVI - D to VGA (provided that the DVI port is DVI - D).  This claims to be a DVI - D to VGA.  Base don this siteand the image, the adapter doesn't seem to be an adapter DVI - D dual link would work.  However, some reviewed said that he is in reality a DVI - I adapter that would work for this scenario unless the video card's DVI - I instead.

  The following options would be to use a KVM DVI switch or upgrade the monitor.  From my research, it seems that he had options in two similar categories in the price.