My terminal application fails to work properly.

Similar Questions

• STOP: C0000145 (ERROR of APPLICATION), the application failed to initialize properly (0xc0000005)

  STOP: C0000145 (ERROR of APPLICATION), the application failed to initialize properly (0xc0000005).  Click OK to close the application.

  Occurs when I try to restart my laptop and ends the boot process.

  03/08/11 I get this same error, and I see that nobody has answered it yet. DPR anyone has any idea other than a new image for this problem?

  Rodolphe/Spyware/Malware infection, blue screens don't have an option to click OK to finish or even forget that you can click on anything. If you do not work in safe mode or even last known good configuration you can try a repair installation, but you can still loose data like that. I would just pull the information you need out of the HDD using a speaker and then wipe and start over from scratch. Don't forget to scan your files if you do not import everything using a speaker. However if you can access the mode safe mode with networking, try to download malware bytes and running (don't know how its spelled) it will remove files such as _is27.exe which is a (Rogue.Installer).

• How solve this error message application failed to initialize properly 0xc0000005 on start up

  Hi my name corri I have a computer laptop advent. When I start my laptop it goes to the widowed loding fine screen but then when it goes beyond this point he then goes to this error message

  (application failed to initialize properly 0xc0000005) then I click on ok, then it is once again, then I click ok again then it goes. then after it will theres just a blank screen without icons or nothing... I can't even open Task Manager some can help me please solve it!

  Hello

  You can try the steps below and check if that helps. You need the Windows XP installation CD to go forward with the steps below.

  (a) use the Recovery Console, which is described in the article below.
  http://support.Microsoft.com/kb/314058

  Note: You must make sure that your primary boot device is CD drive - go into the BIOS to ensure, if necessary,

  (b) (b) demarrer start from the Windows XP installation CD-ROM, and then use the EXPAND command, like this:
  Expand d:\i386\wininet.dl_ c:\windows\system32\wininet.dll

  Note: Where d: is the CD-ROM drive

  (c) then type EXIT and when the pc reboots, you should be able to boot XP.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "ibrytdesktop.exe. the application failed to initialize properly (0xc0000135)" when the computer is turned on.

  Original title: need help please

  Ive had an application error, ibrytdesktop.exe. Note ISC, the application failed to initialize properly (0xc0000135), click ok to close the application. Can this happens whenever the computer is on how I fix

  Hi petrospapamihelakis,

  Looks like one of the installed program on the computer has been corrupted.

  ·         Have you checked the problem in safe mode?

  Step 1: Try to start in safe mode to see if you get the error.

  Step 2: If he is able to start very well without any errors, and then try to try perform a clean boot to normal mode to check whether a third-party program is causing the problem.

  How to configure Windows XP to start in a "clean boot" State

  You can also read the following article to resolve the problems on the issue.

  Perform a clean boot to determine if background programs interfere with your game or program.

  Note: Make sure that you put the computer to a Normal startup once you are finished.

• Reinstallation of Windows Media Center XP error, the application failed to initialize properly (0xc000135

  I had to install a new hard drive after the death of my old. I use my Dell recovery/reinstallation disk. The first time I tried installing that it froze after the reboot. I then did a repair installation (twice) and each time got the following error:

  PxShare.exe Application error.

  The application failed to initialize properly (0xc000135).  Click OK to close the application.

  It appears at the end of the installation, but when my login screen is displayed, it shows only one account, administrator and request a password. I have not configured any accounts when I did the installation and you do not have a password. I tried to enter without password, using admin as password and check-in safe mode did not help - it still asked for a password.

  I don't know if the two problems are related or not.

  Thanks for any help!

  Hi Lowery619,

  (a) If you have external devices unnecessary connected to the machine, unplug them.

  (b) thereafter, you can try reinstalling Windows XP.

  For more information, please visit this link: install, reinstall, or uninstall Windows

  Install Windows XP

  Hope the helps of information.

  Please post back and we do know.

• If I update to windows 7 it will fix error application failed to initialize properly?

  When I try to open certain programs I get application failed to initialize properly.

  I want to know if I upgrade from Windows Vista to Windows 7 will be the mistake still be there?

  Will he take it?

  Thank you

  Mildred W.

  Hello

  1. Since when are you facing this problem?

  2. don't you make recent changes?

  3. What is the full error message?

  4. what programs you try to run?

  If you upgrade Windows Vista to Windows 7, once again depends on what program you use. If there is a problem with this program, you could get the same question.

  If these programs are third-party programs, so I suggest to uninstall and reinstall once and check to see if the same problem happens.

  Alternatively, you can also try to restore the computer to an earlier point and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  It will be useful.

• First pro cc application failed to start properly (0xc000001d) click on OK to close the application. I get this message after update software. Help, please

  First pro cc application failed to start properly (0xc000001d) click on OK to close the application. I get this message after update software. Help, please!

  Hi RC,.

  Update first Pro CC 2015 (9.2).

  Thank you

  Kevin

• Failed to open the first Pro CC 2015.Windows are unable to connect to the Adobe server... This application failed to start properly 0xc000001d... Click ok to close the application

  Failed to open the first Pro CC 2015.Windows are unable to connect to the Adobe server... This application failed to start properly 0xc000001d... Click ok to close the application

  Hi qksdjhfb,

  For a fix, update for first Pro CC 2015 (9.2).

  Thank you

  Kevin

• Lightroom 6 license perpetual error 0xc00007b - the application failed to start properly

  Hello

  I installed 6 Lightroom on my laptop (perpetual license, no cc, machine is a dell win 7 64 bit, Intel core I7, 32 MB memory processor). No problem to install.

  I can't run the program. The message "the application failed to start Oxc00007b - click ok to close.»

  I spent hours searching the Internet for a solution. No way at the moment. Of course, I uninstalled, reinstalled and so on.

  I copied the DLL as suggested in the post from adobe (error: "unable to start correctly (0Xc000007b)")

  I did a windows repair using the microsoft web site

  All other applications work without a problem, including lightroom 5.7 and photoshop CS5

  I have not uninstalled visual c ++ libraries, ignoring it to other uses of the application which version of C++

  I'm stuck with my problem. Could someone help?

  Hi Benoit,.

  In the end, I completely reinstalled Windows 10 and it works perfectly fine. So this is a windows problem

  Thank you for all

  Jean-Paul

• Error when you try to open Internet Explorer 8: the application failed to initialize properly (0xc0000005)

  IExplorer 8 causes error "the application could not initialize properly (0xc0000005)."

  Hello

  I use Windows XP and make regular updates. I use a firewall, Windows Defender, virusprotection, etc and I don't surf _ or download strange apps.

  Whenever I try to open 8 IExplorer, it gives me an error "the application could not initialize properly (0xc0000005)."

  Any ideas how I can fix explore?

  You use XP, but post in a forum of Vista, and Internet Explorer has an own forum. Please ask here.

  Internet Explorer Forum
  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• The application failed to initialize properly (0xc000001d)

  My name is Daniel and I had problems with windows 7 and had to reinstall. I formatted the hard drive and after reinstalling windows, I started to download the Photoshop, After Effects and Premiere Pro compared to the Creative clouds... After installing these programs, when I try to open these programs they do not open. Opens an error message... "The application could not initialize properly (0xc000001d). Click OK to close the application. "What I'm doing? Someone help me pelase. I have a card mother Gigabyte Z97X-UD3H-BK, Intel Core i7-4790 CPU @ 3.60 GHz, NVIDIA GeForce GTX 680, 16 GB of RAM and Windows 7 Ultimate x 64.

  Hi Daniel,.

  Could you please check and verify if you have Windows 7 Service Pack 1 installed or not?

  Please post the log of errors.

  ~ UL

• KKKKK application fails to work even after the update of the latest graphic drivers

  I'm portable Inspiron 15R 7520 (SE) and I installed the kkkkk application that does not work even after updating to the latest drivers from the manufacturer, dell.  I also tried to run this application high performance, but it still does not work. I get an error message saying "your graphics driver seems to be updated. KKKKK requires updated drivers to update run. Updated now? "And then by selecting YES, Intel website is displayed when the last driver update is available for download. After you download that, driver is not installed as new error shown saying "the pilot is not validated for this computer". Kindly help me to solve this error.   Thanks V.Raikar.

  In order to run kkkkk with no errors, you must reinstall or download the installer kkkkk offline

  and if you encounter an error than to follow this guide

  www.thesoftwarehax.com/.../Solve-bluestacks-Graphic-Card-Error-25000-Windows.html

• Application failed to start properly (0xc0000018)

  Windows 10 - Version 1511 (OS build 10586.17)

  PhotoChop CS6 extended was working fine until I tried to open it this morning. That's what I got:

  Photoshop.exe - Application error. Click OK to close the program.

  I have redownloaded Photoshop since my account online from Adobe and re-installed, but got the same error code. I do not uninstall what was already on the computer because I was hoping to avoid a huge hassle dealing re-install from scratch.

  Hi LyndanLeeAnn,

  Please make sure that les fenetres windows to date, so please fix Microsoft Visual C++ 2012, 2013 of the control panel.

  Kind regards

  Tanuj

• the application failed to start properly (0xc00007b)

  How can I solve this problem?

  If the application is "Adobe Photoshop Lightroom" then take a look at:

  Error "could not start properly - 0Xc00007b

• The application failed to initialize properly (0xc000005)

  When I run some applications (I guess point net apps) they come with this error in the application. This error appears when I run my Visual Studio project (when I run debug file). It still happens if I create a new project. This affects several applications. The event type is a popup of the application and the number is 26. It is related to this error I get when running applications on VB2008 "could not load file or assembly 'Project name' or one of its dependencies, the specified module could not be found. Boot in safe mode always comes up with the error.

  I can't find a solution to this problem. Apparently, it happened when I ran a particular application or something else of editing the registry. Any help would be greatly appreciated!

  Hi Gruntkillerl,

  Welcome to the Microsoft community.

  The question you posted would be better suited in the MSDN Forums.
  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio, vsarch, vsdbg, vstest, vstfs, vsdata, vsappdev, visualbasic, visualcsharp, end

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.